YLYuping Liu

Yuping Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuping Liu has a total of 110 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Lithiophilic 3D porous carbon frameworks coupled with a LiF/LiCl/Li 3 N-rich SEI layer as Li metal hosts for robust solid-state lithium metal batteries

    by Yuping Liu, Zhihua Lin, Rong Yao, Cong Li, Qi Gao, Mei Ou, Xiaohui Zhu, Shuangyi Liu, Lisha Mou, Fei Ding, et al.

    N-doped defects in a lithiophilic 3D carbon host regulate Li nucleation, while additives form a LiF/LiCl/Li 3 N-rich SEI, stabilizing the Li/LPSCl interface and suppressing dendrites and polarization for durable cycling.

  • Open Access

    Multi‐Phase Heterostructured NiMoN Nanoflower as Bifunctional Separator Coatings for High‐Performance Lithium–Sulfur Batteries

    by Frederik Bettels, Tim Niclas Will, Zhihua Lin, Tao Liu, Yuping Liu, Fei Ding, Lin Zhang

    Lithium–sulfur (Li–S) batteries are considered promising candidates for next‐generation energy storage owing to their high theoretical energy density and the abundance of sulfur. However, the practical application of Li–S systems is limited by the polysulfide shuttle effect and sluggish redox kinetics. Herein, we report the synthesis and electrochemical evaluation of multi‐phase heterostructured nickel molybdenum nitride (NiMoN) nanoflowers as multifunctional separator coatings for Li‐S batteries. Structural and morphological analyses reveal porous NiMoN nanostructures composed of coexisting Ni, MoN, and Ni 0.2 Mo 0.8 N phases forming abundant heterointerfaces throughout the nanoflower architecture. These interfaces create highly active catalytic sites that promote strong polysulfide adsorption and accelerate their conversion. Electrochemical studies demonstrate that NiMoN significantly reduces charge transfer resistance, enhances Li + diffusion, and accelerates polysulfide redox reactions compared to NiN and uncoated Celgard separators. While NiN exhibits higher initial specific capacities, the interface‐rich NiMoN heterostructure demonstrates superior cycling stability, and lower capacity fading, maintaining 864.8 mAh g −1 after 50 cycles at 0.2 C and exhibiting excellent rate performance with strong reversibility at varying C‐rates. These results highlight multi‐phase heterostructured NiMoN nanoflowers as a promising dual‐metal nitride catalyst for suppressing the shuttle effect and enabling high‐performance Li–S batteries.

  • Open Access

    Configuration‐Engineered Zn 2+ Solvation for Directed Interfacial Chemistry in Aqueous Zinc Batteries

    by Zhihua Lin, Hairu Wei, Qi Qi, Frederik Bettels, Taoran Li, Haiwei Wu, Fei Ding, Chaofeng Zhang, Yuping Liu, Lin Zhang

    Uncontrolled desolvation of dynamically hydrated [Zn(H 2 O) 6 ] 2+ complexes constitute the primary bottleneck for reversible aqueous zinc‐ion batteries, leading to stochastic interfacial side reactions and unpredictable solid–electrolyte interphase formation. Herein, we propose a configuration‐engineering strategy to regulate the Zn 2+ primary solvation sheath. Guided by the molecular design principles, i.e., configuration‐defined chelation, intermediate coordination strength, and regulated interfacial chemistry, we construct a stable five‐membered chelating structure using cysteamine as a model additive. The defined chelate configuration effectively displaces coordinated water molecules, lowering the desolvation energy barrier and reshaping the interfacial electronic distribution. The chelated complex participates in interfacial reactions during cycling, contributing to the formation of an N/S‐enriched interfacial layer that synergistically suppresses water activity while maintaining highly homogenized Zn 2+ flux transport. Consequently, the Zn anode achieves an exceptional lifespan of over 2000 h with a significantly reduced nucleation overpotential. This work establishes a generalized configurational design for electrolyte engineering toward high‐performance aqueous zinc‐ion batteries.

  • Chromium and molybdenum dual-metal nanoclusters: synergistic catalysis of sulfur redox for high performance Li–S batteries

    by Tao Liu, Zhihua Lin, Rong Yao, Xingfu Quan, Qi Gao, Huixiang Xu, Shuangyi Liu, Fei Ding, Maowen Xu, Yuping Liu, et al.

    The practical applications of lithium–sulfur (Li–S) batteries are currently hindered by several obstacles, including the shuttle effect of lithium polysulfides (LiPSs) and the sluggish kinetics of sulfur redox reactions, especially the conversion of liquid LiPSs to solid Li2S, which results in limited specific capacity and dramatic cyclic cycling capacity decay. To alleviate these limitations, a novel catalyst consisting of chromium and molybdenum transition metal nanoclusters embedded in nitrogen-doped graphene (Cr/Mo@N-C) is reported in this work. When this catalyst is used for Li–S batteries, the nitrogen-doped graphene provides strong adsorption sites for long-chain LiPSs; meanwhile, the Cr and Mo nanoclusters are segmented to facilitate the subsequent redox reactions: the Cr nanocluster governs the reversible phase transitions between elemental sulfur (S) and long-chain LiPSs and the Mo nanocluster expedites the reduction kinetics between short-chain LiPSs and solid Li2S. As a result, Li–S batteries with this catalyst deliver exceptional electrochemical performance, achieving a specific capacity of 1431 mAh g−1 at 0.1C, which is more than 85% of the theoretical capacity, and sustaining superior rate capabilities of 704 mAh g−1 at 5C.


  • Accelerating Liquid‐Solid Phase Polysulfide Conversion with Triphasic MoN Cubic ‐Co‐MoN Hexagonal Heterostructures for High‐Performance Li/Na‐S Batteries

    by Xingfu Quan, Zhongkai Huang, Liang Deng, Rong Yao, Qi Gao, Jingjing Xu, Shuangyi Liu, Kai Huang, Chaosheng Deng, Yuping Liu

    Lithium‐sulfur (Li‐S) batteries represent an attractive next‐generation energy storage technology owing to their high theoretical energy density. Simultaneously, room‐temperature sodium‐sulfur (RT Na‐S) batteries have emerged as promising candidates for large‐scale energy storage due to the low cost and high abundance of sodium resources. Nevertheless, their practical deployments are severely limited by the notorious polysulfide shuttle effect, sluggish reaction kinetics, and low sulfur utilization. And the liquid‐solid conversion is a critical bottleneck, as it represents 75% of the maximum theoretical value. To address this, we report a novel catalyst comprising cobalt‐doped molybdenum nitride, a triphasic porous heterostructured MoN Cubic ‐Co‐MoN Hexagonal (MoN C ‐Co‐MoN H ). This integrated catalyst operates with high efficiency, as it capitalizes on the inherent synergy between its constituents to regulate the kinetics of polysulfide adsorption, diffusion, and conversion. The electrochemical investigations, spectroscopic analysis, and theoretical calculations demonstrate that the MoN C ‐Co‐MoN H significantly enhances the efficiency of the conversion from Li 2 S 4 to Li 2 S, and reduces the energy barriers for both Li 2 S nucleation/decomposition. Accordingly, Li‐S batteries incorporating the MoN C ‐Co‐MoN H catalyst deliver a combination of high capacity (1557.4 mAh g −1 at 0.1 C, 93% sulfur utilization), excellent rate capability, and long‐term cycling stability. Impressively, this heterostructure also confers exceptional electrochemical properties to RT Na‐S batteries.


  • Tailoring high‐concentration aqueous electrolytes for enhanced anion intercalation behavior in dual‐ion batteries

    by Ziming Zhao, Yuhan Mei, Shuai Zhao, Yuping Liu, Huan Li

    Aqueous dual‐ion batteries (ADIBs) are promising for large‐scale storage but face challenges in a lack of in‐depth understanding of anion intercalation behavior and the difficulty in formulating aqueous electrolytes with a wide electrochemical stability window. Here, we regulate the anion intercalation behavior in graphite cathodes by designing high‐concentration aqueous electrolytes using organic lithium salts (LiTFSI, LiFSI, and LiOTf). A combined experimental and theoretical calculation reveals that the intercalation behavior, including intercalation energy and diffusion barrier, is highly anion‐dependent, identifying TFSI − and FSI − as the anions with the most favorable kinetics and reversibility. Electrolyte optimization, particularly a mixed‐salt system (37m 9LiFSI‐1LiTFSI), expands the electrochemical window beyond 3.1 V and enhances cycling stability. Furthermore, partial water substitution by 12‐crown‐4 ether effectively suppresses hydrogen evolution, boosting the Coulombic efficiency to 90%. This work provides fundamental insights into anion intercalation mechanisms in aqueous media and offers a viable electrolyte design strategy toward high‐voltage ADIBs.

  • Open Access

    Poly(Vinylidene Fluoride)‐Wrapped LiFePO 4 Microspheres as Highly Stable Dual Functional Cathode for Solid‐State Lithium Batteries

    by Taoran Li, Frederik Bettels, Zhihua Lin, Sreeja K. Satheesh, Chaofeng Zhang, Yuping Liu, Fei Ding, Lin Zhang

    Solid polymer electrolytes hold great promise for achieving improved processability and safety in solid‐state lithium‐ion batteries (LIBs); however, several inherent challenges arise from the use of polymers. One critical issue is the ultrahigh interfacial resistance between the cathode and electrolyte, which has emerged as a main research focus in recent years. In this study, a dual functional cathode (DFC) is developed by uniformly dispersing the cathode material (LiFePO 4 ) into the polymer electrolyte poly(vinylidenfluorid ‐ co‐hexafluorpropylene):lithium bis(trifluoromethanesulfonyl)imide, resulting in a conformable lamella structure with embedded microspheres. Simultaneous enhancement of the interfacial contact and the ion transport efficiency is observed. Solid‐state LIBs incorporating the proposed DFC demonstrate exceptional electrochemical performance at room temperature, exhibiting a high discharge capacity of 138 mAh g −1 at 1 C, along with an impressive capacity retention of over 80% after 250 cycles, all while preserving the intricate spherical structure. The discharge capacity reaches 98 mAh g −1 even at a high rate of 5 C. At an elevated temperature of 60 °C, a capacity retention of 80% is obtained after 500 cycles. Therefore, this work provides a simple but effective design concept for improving interfacial compatibility between the cathodes and polymer electrodes in solid‐state LIBs.

  • Open Access

    Single‐Atom Chromium‐Embedded N‐Doped Graphene as a Multifunctional Separator Coating for Lithium–Sulfur Batteries

    by Frederik Bettels, Donna Rashidi, Zhihua Lin, Leon Schenk, Taoran Li, Haiwei Wu, Irmgard Frank, Ebrahim Nadimi, Yuping Liu, Chaofeng Zhang, et al.

    Lithium–sulfur (Li–S) batteries offer a promising alternative to traditional lithium‐ion batteries due to their high energy density, large capacity, cost advantages, and environmental benefits. However, their commercialization is impeded by challenges like the lithium polysulfide (LiPS) shuttle effect, necessitating advanced sulfur host materials and separator coatings for the effective trapping of LiPSs and enhancing the ion transfer. In this research, single‐atom chromium‐incorporated nitrogen‐doped graphene (Cr@NG) is introduced as a novel separator coating, synthesized by an NaCl soft‐template method. This material, as an efficient and economic alternative to other existing single‐atom catalysts‐based materials, combines high conductivity and catalytic activity, effectively suppressing the shuttle effect and enhancing sulfur conversion. First‐principles calculations and electrochemical studies further demonstrate that Cr@NG significantly improves adsorption capabilities, capacity retention, rate capability, and cycling stability. The incorporation of chromium offers substantial benefits in electron transport and catalytic efficiency, establishing Cr@NG as a promising multifunctional separator coating for high‐performance Li–S batteries.


  • Top Cited Papers

    Recycling and direct regeneration of valuable cathode materials from spent Li-ion batteries: a comprehensive review

    by Yuping Liu, Tao Liu, Jie Zhao, Yaxin Shao, Xu Li, Zhenhu Li, Yulin Zhang, Shuangyi Liu, Zhihua Lin, Frederik Bettels, et al.

    This review analyzes key recycling and regeneration methods for spent cathodes, emphasizing scientific advances and their significance. It discusses challenges, future directions, and scalable solutions for industrial implementation.