Euclides Mesquita
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Euclides Mesquita has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Josué Labaki
School of Mechanical Engineering University of Campinas Campinas Brazil
9 shared publications - Amauri Coelho Ferraz
University of Campinas, Brazil
5 shared publications - Daniela Andrade Damasceno
Universidade de São Paulo, Instituto de Física, Rua do Matão 1371, São Paulo, São Paulo 05508-090, Brazil
5 shared publications - Luis Filipe Do Vale Lima
University of Campinas, Brazil
5 shared publications - Otávio Tovo
Universidade Estadual de Campinas, Brazil
3 shared publications - R. K. N. D. Rajapakse
School of Engineering Science, Simon Fraser University, Burnaby, Canada
3 shared publications
Latest Publications
- Open Access
- 18 November 2026
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 14 (8)
On the Potential of Periodic Structures to Minimize Ground Vibrations Induced by a Rotor-Structure-Foundation System
Purpose: This paper investigates the role of periodic structures in minimizing ground vibrations induced by a rotor-structure-foundation-soil system. A partially periodic structure is introduced between the rotor and the soil-foundation system to assess its effectiveness in reducing vibration transmission through the supporting structure. Methods: A methodology is presented to obtain the transient response of a system comprising an unbalanced rotor, a supporting structure, and soil. The system is divided into two subsystems: a nonlinear rotor on a rigid foundation and a linear structure interacting with the soil. The time-domain equations of the structure-foundation-soil subsystem are synthesized from modal parameters extracted from Frequency Response Functions. The nonlinear rotor equations are derived from conservation principles of mechanics. Both subsystems are coupled through a staggered coupling procedure. Results: The results show that periodic structures significantly reduce vibration transmission when the excitation frequency lies within a bandgap. Reductions of up to five orders of magnitude are observed across the periodic region. The position of this region determines where attenuation occurs along the supporting structure. Significant reductions are obtained for both fixed-base and half-space supports. The transient analysis also captures the rotor run-up phase and its stabilization near the first resonance. Conclusion: The study demonstrates that partially periodic structures can effectively reduce vibration transmission along the supporting structure when the excitation frequency lies within a bandgap. The position of the periodic structure influences the vibration distribution, allowing different portions of the system to be isolated from the excitation source. Furthermore, the results indicate that the periodic structure acts as an efficient vibration decoupling device, significantly reducing the influence of the rotor excitation on the soil-foundation system, regardless of the supporting condition. The proposed methodology also enables the computation of transient responses over long time intervals using small time steps, accounting for nonlinear rotor dynamics and soil–structure interaction.
- 18 November 2026
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 14 (8)
Open AccessOn the Potential of Periodic Structures to Minimize Ground Vibrations Induced by a Rotor-Structure-Foundation System
Purpose: This paper investigates the role of periodic structures in minimizing ground vibrations induced by a rotor-structure-foundation-soil system. A partially periodic structure is introduced between the rotor and the soil-foundation system to assess its effectiveness in reducing vibration transmission through the supporting structure. Methods: A methodology is presented to obtain the transient response of a system comprising an unbalanced rotor, a supporting structure, and soil. The system is divided into two subsystems: a nonlinear rotor on a rigid foundation and a linear structure interacting with the soil. The time-domain equations of the structure-foundation-soil subsystem are synthesized from modal parameters extracted from Frequency Response Functions. The nonlinear rotor equations are derived from conservation principles of mechanics. Both subsystems are coupled through a staggered coupling procedure. Results: The results show that periodic structures significantly reduce vibration transmission when the excitation frequency lies within a bandgap. Reductions of up to five orders of magnitude are observed across the periodic region. The position of this region determines where attenuation occurs along the supporting structure. Significant reductions are obtained for both fixed-base and half-space supports. The transient analysis also captures the rotor run-up phase and its stabilization near the first resonance. Conclusion: The study demonstrates that partially periodic structures can effectively reduce vibration transmission along the supporting structure when the excitation frequency lies within a bandgap. The position of the periodic structure influences the vibration distribution, allowing different portions of the system to be isolated from the excitation source. Furthermore, the results indicate that the periodic structure acts as an efficient vibration decoupling device, significantly reducing the influence of the rotor excitation on the soil-foundation system, regardless of the supporting condition. The proposed methodology also enables the computation of transient responses over long time intervals using small time steps, accounting for nonlinear rotor dynamics and soil–structure interaction.
- 2 January 2026
- Published by Springer Nature
- p. 698-707
The Role of Damping Mechanisms on the Transient Behavior of Rotor-Structure-Foundation-Soil Systems
- 2 January 2026
- Published by Springer Nature
- p. 698-707
The Role of Damping Mechanisms on the Transient Behavior of Rotor-Structure-Foundation-Soil Systems
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 23 (1)
Dynamics of a rotor-structure-soil system: transient response by iterative coupling
In this paper, the transient dynamics of a rotor-foundation-structure-soil system is studied to obtain unbalance response of the rotor considering the influence of the structure and the unbounded soil. Transient responses are obtained through iterative coupling between the rotor subsystem and the frame-soil subsystem. The non-linear rotor subsystem is represented by a Laval rotor with rigid bearings and external and internal damping. These equations of motion are solved with the fourth-order Runge-Kutta method. The frame is modeled by the Finite Element Method, while the homogeneous half-space is modeled by the 3D Direct Boundary Element Method in the frequency domain. To derive time-domain equivalent equations of motion, a methodology is proposed based on extracting modal parameters from Frequency Response Functions of the coupled soil-foundation system, using the Rational Fraction Polynomial Method. The methodology renders transient response for the rotor and structure with small time steps, allowing an accurate simulation of the rotor runup phase and the dynamics of the system going through resonance frequencies.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 23 (1)
Open AccessDynamics of a rotor-structure-soil system: transient response by iterative coupling
In this paper, the transient dynamics of a rotor-foundation-structure-soil system is studied to obtain unbalance response of the rotor considering the influence of the structure and the unbounded soil. Transient responses are obtained through iterative coupling between the rotor subsystem and the frame-soil subsystem. The non-linear rotor subsystem is represented by a Laval rotor with rigid bearings and external and internal damping. These equations of motion are solved with the fourth-order Runge-Kutta method. The frame is modeled by the Finite Element Method, while the homogeneous half-space is modeled by the 3D Direct Boundary Element Method in the frequency domain. To derive time-domain equivalent equations of motion, a methodology is proposed based on extracting modal parameters from Frequency Response Functions of the coupled soil-foundation system, using the Rational Fraction Polynomial Method. The methodology renders transient response for the rotor and structure with small time steps, allowing an accurate simulation of the rotor runup phase and the dynamics of the system going through resonance frequencies.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 22 (10)
Numerical analysis of the bandgap-inducing properties of sandwich foundations
This paper investigates the vibration attenuation performance of periodic foundations for surface structures. A numerical method is proposed, which considers one- or two-dimensional linear-elastic bodies under time-harmonic external load and seismic excitation. These bodies are modeled via the Finite Elements Method, while their supporting soil is modeled as a homogeneous half-space via the Indirect Boundary Element Method. Coupling between the methods is obtained by imposing direct continuity and equilibrium conditions at the interface. Three different configurations of foundations are studied: 1) no foundation, 2) homogeneous foundation, and 3) sandwich foundation – two materials layered in an alternate fashion. Material properties and thickness of the layers are selected to induce prescribed bandgaps in the response of the structure. The results are presented in terms of data that can be directly applied in engineering practice.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 22 (10)
Open AccessNumerical analysis of the bandgap-inducing properties of sandwich foundations
This paper investigates the vibration attenuation performance of periodic foundations for surface structures. A numerical method is proposed, which considers one- or two-dimensional linear-elastic bodies under time-harmonic external load and seismic excitation. These bodies are modeled via the Finite Elements Method, while their supporting soil is modeled as a homogeneous half-space via the Indirect Boundary Element Method. Coupling between the methods is obtained by imposing direct continuity and equilibrium conditions at the interface. Three different configurations of foundations are studied: 1) no foundation, 2) homogeneous foundation, and 3) sandwich foundation – two materials layered in an alternate fashion. Material properties and thickness of the layers are selected to induce prescribed bandgaps in the response of the structure. The results are presented in terms of data that can be directly applied in engineering practice.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 20 (6)
A quadratic boundary element for 3D elastodynamics
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 20 (6)
Open AccessA quadratic boundary element for 3D elastodynamics
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 20 (6) , e502
Coupling Modal Analysis with the BEM for the Transient Response of Bar Structures Interacting with Three-Dimensional Soil Profiles
This work investigates the transient response of bar structures interacting with three-dimensional soil profiles. The structures are modeled by the Finite Element Method (FEM) and the soil models are described by a three-dimensional Boundary Element Formulation (BEM) in the frequency domain. A classic modal analysis is performed on the structure in terms of the relative displacements with respect to the soil. The dynamic response of the structure is coupled to the soil response, aiming to obtain frequency response functions (FRFs) of the soil-structure system. A new set of modal parameters are extracted from the FRFs of the coupled system. These new parameters allow for the synthesis of a set of orthogonal differential equations in the time domain. These equations are integrated by a classical numerical scheme resulting in the transient response of the structure interacting with the supporting soil. It is shown that for soil profiles that present eigenfrequencies, the system modal basis must be expanded to properly include the soil dynamics. The cases of a structure interacting with a homogeneous half-space and with a horizontal layer over a rigid stratum are considered. The results presented for both soil models are consistent.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 20 (6) , e502
Open AccessCoupling Modal Analysis with the BEM for the Transient Response of Bar Structures Interacting with Three-Dimensional Soil Profiles
This work investigates the transient response of bar structures interacting with three-dimensional soil profiles. The structures are modeled by the Finite Element Method (FEM) and the soil models are described by a three-dimensional Boundary Element Formulation (BEM) in the frequency domain. A classic modal analysis is performed on the structure in terms of the relative displacements with respect to the soil. The dynamic response of the structure is coupled to the soil response, aiming to obtain frequency response functions (FRFs) of the soil-structure system. A new set of modal parameters are extracted from the FRFs of the coupled system. These new parameters allow for the synthesis of a set of orthogonal differential equations in the time domain. These equations are integrated by a classical numerical scheme resulting in the transient response of the structure interacting with the supporting soil. It is shown that for soil profiles that present eigenfrequencies, the system modal basis must be expanded to properly include the soil dynamics. The cases of a structure interacting with a homogeneous half-space and with a horizontal layer over a rigid stratum are considered. The results presented for both soil models are consistent.
- Open Access
- 21 July 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (7) , 1422
Atomistic Modelling of Size-Dependent Mechanical Properties and Fracture of Pristine and Defective Cove-Edged Graphene Nanoribbons
Cove-edged graphene nanoribbons (CGNR) are a class of nanoribbons with asymmetric edges composed of alternating hexagons and have remarkable electronic properties. Although CGNRs have attractive size-dependent electronic properties their mechanical properties have not been well understood. In practical applications, the mechanical properties such as tensile strength, ductility and fracture toughness play an important role, especially during device fabrication and operation. This work aims to fill a gap in the understanding of the mechanical behaviour of CGNRs by studying the edge and size effects on the mechanical response by using molecular dynamic simulations. Pristine graphene structures are rarely found in applications. Therefore, this study also examines the effects of topological defects on the mechanical behaviour of CGNR. Ductility and fracture patterns of CGNR with divacancy and topological defects are studied. The results reveal that the CGNR become stronger and slightly more ductile as the width increases in contrast to normal zigzag GNR. Furthermore, the mechanical response of defective CGNRs show complex dependency on the defect configuration and distribution, while the direction of the fracture propagation has a complex dependency on the defect configuration and position. The results also confirm the possibility of topological design of graphene to tailor properties through the manipulation of defect types, orientation, and density and defect networks.
- 21 July 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (7) , 1422
Open AccessAtomistic Modelling of Size-Dependent Mechanical Properties and Fracture of Pristine and Defective Cove-Edged Graphene Nanoribbons
Cove-edged graphene nanoribbons (CGNR) are a class of nanoribbons with asymmetric edges composed of alternating hexagons and have remarkable electronic properties. Although CGNRs have attractive size-dependent electronic properties their mechanical properties have not been well understood. In practical applications, the mechanical properties such as tensile strength, ductility and fracture toughness play an important role, especially during device fabrication and operation. This work aims to fill a gap in the understanding of the mechanical behaviour of CGNRs by studying the edge and size effects on the mechanical response by using molecular dynamic simulations. Pristine graphene structures are rarely found in applications. Therefore, this study also examines the effects of topological defects on the mechanical behaviour of CGNR. Ductility and fracture patterns of CGNR with divacancy and topological defects are studied. The results reveal that the CGNR become stronger and slightly more ductile as the width increases in contrast to normal zigzag GNR. Furthermore, the mechanical response of defective CGNRs show complex dependency on the defect configuration and distribution, while the direction of the fracture propagation has a complex dependency on the defect configuration and position. The results also confirm the possibility of topological design of graphene to tailor properties through the manipulation of defect types, orientation, and density and defect networks.
- 20 June 2020
- Published by Springer Nature in Acta Mechanica
- Vol. 231 (8) , 3387-3404
Atomistic simulation of tensile strength properties of graphene with complex vacancy and topological defects
- 20 June 2020
- Published by Springer Nature in Acta Mechanica
- Vol. 231 (8) , 3387-3404
Atomistic simulation of tensile strength properties of graphene with complex vacancy and topological defects
- Open Access
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 17 (8)
STATIONARY DYNAMIC RESPONSE OF A CIRCULAR RIGID FOUNDATION PARTIALLY SUPPORTED BY A FLEXIBLE PILE AND INTERACTING WITH A HALF-SPACE
This article describes an analysis of the dynamic response of coupled soil-pile-foundation systems. The soil and the pile models were developed in previous research works. This article describes the influence of three issues on the vertical dynamic foundation response. First, the influence of the foundation bearing mechanism is investigated. The foundation may be supported by the soil, by the pile or by a combination of both supporting mechanisms. A parameter is introduced to allow for a continuous change in the foundation supporting mechanism. Second, the influence of the excitation mechanism is investigated. The considered excitation mechanism are external forces applied directly at the foundation and an incoming wave field impinging the soil-pile-foundation system. Third, the article investigates if, for both excitation mechanism, the response at the pile head only is able to describe properly the soil-pile response. The analysis presented in the article contributes to an in-depth understanding of the dynamic response of coupled soil-pilefoundation systems.
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 17 (8)
Open AccessSTATIONARY DYNAMIC RESPONSE OF A CIRCULAR RIGID FOUNDATION PARTIALLY SUPPORTED BY A FLEXIBLE PILE AND INTERACTING WITH A HALF-SPACE
This article describes an analysis of the dynamic response of coupled soil-pile-foundation systems. The soil and the pile models were developed in previous research works. This article describes the influence of three issues on the vertical dynamic foundation response. First, the influence of the foundation bearing mechanism is investigated. The foundation may be supported by the soil, by the pile or by a combination of both supporting mechanisms. A parameter is introduced to allow for a continuous change in the foundation supporting mechanism. Second, the influence of the excitation mechanism is investigated. The considered excitation mechanism are external forces applied directly at the foundation and an incoming wave field impinging the soil-pile-foundation system. Third, the article investigates if, for both excitation mechanism, the response at the pile head only is able to describe properly the soil-pile response. The analysis presented in the article contributes to an in-depth understanding of the dynamic response of coupled soil-pilefoundation systems.