Ricky J. R. van Kampen
Ricky J. R. van Kampen has a total of 88 co-authors. Here are the top co-authors by number of shared publications:
- Matthijs van Berkel
DIFFER ‐ Dutch Institute for Fundamental Energy Research Eindhoven The Netherlands
10 shared publications - Charles H. Luce
USDA Forest Service Rocky Mountain Research Station Boise ID USA
3 shared publications - Daniele Tonina
Center for Ecohydraulics Research, University of Idaho, Boise, ID 83702, USA
3 shared publications - Gerd Vandersteen
Vrije Universiteit Brussel, Brussels, Belgium
3 shared publications - Jelle Slief
DIFFER—Dutch Institute for Fundamental Energy Research, PO Box 6336, Eindhoven 5600HH, Netherlands
3 shared publications - Timo Ravensbergen
ITER Organization
3 shared publications
Latest Publications
- Open Access
- 3 February 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (3) , 036017
Systematic multi-machine analysis of the exhaust time-dependent behavior in tokamaks
The understanding of the time-scales and associated transient behavior of fusion exhaust plasmas plays a crucial role in its dynamic modeling and its control. This work presents an overview of experimental investigations of the exhaust dynamics in TCV, MAST-U, ASDEX-Upgrade, WEST, DIII-D, and JET. From the presented experiments, a clear picture arises on properties of the exhaust dynamics across machines. Particularly, we observe that the scrape-off layer equilibrates on fast time-scales ( > 70 Hz) and that exhaust dynamics measured in response to gas valve modulations mostly behave smoothly and linearly, with similarities across devices, across scenarios (H-mode, L-mode), injected species, and injection locations. The measurements presented have formed the basis for systematic exhaust control on the considered devices. We now present this database for the essential validation of dynamic exhaust models for reactor design and control.
- 3 February 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (3) , 036017
Open AccessSystematic multi-machine analysis of the exhaust time-dependent behavior in tokamaks
The understanding of the time-scales and associated transient behavior of fusion exhaust plasmas plays a crucial role in its dynamic modeling and its control. This work presents an overview of experimental investigations of the exhaust dynamics in TCV, MAST-U, ASDEX-Upgrade, WEST, DIII-D, and JET. From the presented experiments, a clear picture arises on properties of the exhaust dynamics across machines. Particularly, we observe that the scrape-off layer equilibrates on fast time-scales ( > 70 Hz) and that exhaust dynamics measured in response to gas valve modulations mostly behave smoothly and linearly, with similarities across devices, across scenarios (H-mode, L-mode), injected species, and injection locations. The measurements presented have formed the basis for systematic exhaust control on the considered devices. We now present this database for the essential validation of dynamic exhaust models for reactor design and control.
- Open Access
- 20 November 2024
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 60 (11)
iFLOW: A Framework and GUI to Quantify Effective Thermal Diffusivity and Advection in Permeable Materials From Temperature Time Series
IFLOW is a free, open‐source, and python‐based framework and graphical user interface to visualize and analyze temperature time series, and extract one dimensional thermal velocity, vT, and bulk effective thermal diffusivity, ke. Information of thermal properties of the sediment‐water mixture (bulk) and water allows quantifying the one‐dimensional Darcian flux, q, and seepage velocity, v, from vT. Available software packages were developed to quantify q and ke only based on a specific mathematical model or focused on specific data processing or parameter estimation techniques, and all these steps were lumped together preventing users to identify potential source of errors. iFLOW proposes a novel organizational philosophy with a modular framework that parses the analysis process into three fundamental steps: (a) the mathematical model, (b) signal processing, and (c) parameter estimation. iFLOW houses a suite of models and analysis techniques. This suite can be readily added to and expanded through its modular framework. iFLOW contains a wizard to guide users through the selection process with respect to the three fundamental steps. Users can analyze and visualize intermediate results to identify problematic issues in the time series data and improve data interpretation. Here, we present iFLOW and summarize its performance using a set of one‐dimensional synthetic heat transport simulations.
- 20 November 2024
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 60 (11)
Open AccessiFLOW: A Framework and GUI to Quantify Effective Thermal Diffusivity and Advection in Permeable Materials From Temperature Time Series
IFLOW is a free, open‐source, and python‐based framework and graphical user interface to visualize and analyze temperature time series, and extract one dimensional thermal velocity, vT, and bulk effective thermal diffusivity, ke. Information of thermal properties of the sediment‐water mixture (bulk) and water allows quantifying the one‐dimensional Darcian flux, q, and seepage velocity, v, from vT. Available software packages were developed to quantify q and ke only based on a specific mathematical model or focused on specific data processing or parameter estimation techniques, and all these steps were lumped together preventing users to identify potential source of errors. iFLOW proposes a novel organizational philosophy with a modular framework that parses the analysis process into three fundamental steps: (a) the mathematical model, (b) signal processing, and (c) parameter estimation. iFLOW houses a suite of models and analysis techniques. This suite can be readily added to and expanded through its modular framework. iFLOW contains a wizard to guide users through the selection process with respect to the three fundamental steps. Users can analyze and visualize intermediate results to identify problematic issues in the time series data and improve data interpretation. Here, we present iFLOW and summarize its performance using a set of one‐dimensional synthetic heat transport simulations.
- Open Access
- 23 November 2023
- Published by Taylor & Francis in International Journal of Hyperthermia
- Vol. 40 (1) , 2283388
Simultaneous estimation of SAR, thermal diffusivity, and damping using periodic power modulation for MRgFUS quality assurance
Purpose: A crucial aspect of quality assurance in thermal therapy is periodic demonstration of the heating performance of the device. Existing methods estimate the specific absorption rate (SAR) from the temperature rise after a short power pulse, which yields a biased estimate as thermal diffusion broadens the apparent SAR pattern. To obtain an unbiased estimate, we propose a robust frequency-domain method that simultaneously identifies the SAR as well as the thermal dynamics.Methods: We propose a method consisting of periodic modulation of the FUS power while recording the response with MR thermometry (MRT). This approach enables unbiased measurements of spatial Fourier coefficients that encode the thermal response. These coefficients are substituted in a generic thermal model to simultaneously estimate the SAR, diffusivity, and damping. The method was tested using a cylindrical phantom and a 3 T clinical MR-HIFU system. Three scenarios with varying modulation strategies are chosen to challenge the method. The results are compared to the well-known power pulse technique.Results: The thermal diffusivity is estimated at 0.151 mm2s-1 with a standard deviation of 0.01 mm2s-1 between six experiments. The SAR estimates are consistent between all experiments and show an excellent signal-to-noise ratio (SNR) compared to the well established power pulse method. The frequency-domain method proved to be insensitive to B0-drift and non steady-state initial temperature distributions.Conclusion: The proposed frequency-domain estimation method shows a high SNR and provided reproducible estimates of the SAR and the corresponding thermal diffusivity. The findings suggest that frequency-domain tools can be highly effective at estimating the SAR from (biased) MRT data acquired during periodic power modulation.
- 23 November 2023
- Published by Taylor & Francis in International Journal of Hyperthermia
- Vol. 40 (1) , 2283388
Open AccessSimultaneous estimation of SAR, thermal diffusivity, and damping using periodic power modulation for MRgFUS quality assurance
Purpose: A crucial aspect of quality assurance in thermal therapy is periodic demonstration of the heating performance of the device. Existing methods estimate the specific absorption rate (SAR) from the temperature rise after a short power pulse, which yields a biased estimate as thermal diffusion broadens the apparent SAR pattern. To obtain an unbiased estimate, we propose a robust frequency-domain method that simultaneously identifies the SAR as well as the thermal dynamics.Methods: We propose a method consisting of periodic modulation of the FUS power while recording the response with MR thermometry (MRT). This approach enables unbiased measurements of spatial Fourier coefficients that encode the thermal response. These coefficients are substituted in a generic thermal model to simultaneously estimate the SAR, diffusivity, and damping. The method was tested using a cylindrical phantom and a 3 T clinical MR-HIFU system. Three scenarios with varying modulation strategies are chosen to challenge the method. The results are compared to the well-known power pulse technique.Results: The thermal diffusivity is estimated at 0.151 mm2s-1 with a standard deviation of 0.01 mm2s-1 between six experiments. The SAR estimates are consistent between all experiments and show an excellent signal-to-noise ratio (SNR) compared to the well established power pulse method. The frequency-domain method proved to be insensitive to B0-drift and non steady-state initial temperature distributions.Conclusion: The proposed frequency-domain estimation method shows a high SNR and provided reproducible estimates of the SAR and the corresponding thermal diffusivity. The findings suggest that frequency-domain tools can be highly effective at estimating the SAR from (biased) MRT data acquired during periodic power modulation.
- Open Access
- 24 February 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-7
Fast simultaneous estimation of nD transport coefficients and source function in perturbation experiments
In the calculation of transport coefficients from experimental data precise knowledge of the source is usually assumed, while the identification of the coefficients focuses on specific geometries and one spatial variable. This paper presents a method for the simultaneous estimation of both the distributions of transport coefficients as well as the source profile. A convex solution of the inverse problem is retained which makes the calculations highly computational efficient. Moreover, this allows for the estimation of multi-dimensional transport coefficients, source terms, and in the future the analysis of the effect of regularization on experimental data and transport coefficient distributions.
- 24 February 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-7
Open AccessFast simultaneous estimation of nD transport coefficients and source function in perturbation experiments
In the calculation of transport coefficients from experimental data precise knowledge of the source is usually assumed, while the identification of the coefficients focuses on specific geometries and one spatial variable. This paper presents a method for the simultaneous estimation of both the distributions of transport coefficients as well as the source profile. A convex solution of the inverse problem is retained which makes the calculations highly computational efficient. Moreover, this allows for the estimation of multi-dimensional transport coefficients, source terms, and in the future the analysis of the effect of regularization on experimental data and transport coefficient distributions.
- Open Access
- 17 January 2023
- Published by IOP Publishing in Nuclear Fusion
- Vol. 63 (2) , 026029
Quantifying electron cyclotron power deposition broadening in DIII-D and the potential consequences for the ITER EC system
The injection of electron cyclotron (EC) waves fulfills a number of important tasks in nuclear fusion devices for which detailed knowledge of the spatial power deposition profile is critical. This deposition profile is commonly determined using forward models such as beam or ray tracing. Recent numerical and experimental studies have shown that small-angle scattering of the EC beam as it passes through the turbulent plasma edge can cause significant broadening of the effective deposition profile, leading to considerable underestimation of the deposition width by forward methods. However, traditional inverse methods to determine the deposition profile from measurements overestimate the deposition profile width due to transport broadening. In this work, we implement three novel methods to resolve the EC power deposition profile from measurements that counteract transport broadening by simultaneously resolving transport and power deposition. We validate their assumptions and compare the results from these methods to the traditional break-in-slope method as well as to the TORAY ray-tracing code in a set of DIII-D discharges spanning five different confinement modes. We show that the four different inverse methods, novel and established, paint a consistent picture of deposition broadening. Specifically, we show that the measured power deposition profile is between 1.6 and 3.6 times wider than the TORAY profiles. Moreover, we show the considerable consequences that this level of broadening can have for ITER.
- 17 January 2023
- Published by IOP Publishing in Nuclear Fusion
- Vol. 63 (2) , 026029
Open AccessQuantifying electron cyclotron power deposition broadening in DIII-D and the potential consequences for the ITER EC system
The injection of electron cyclotron (EC) waves fulfills a number of important tasks in nuclear fusion devices for which detailed knowledge of the spatial power deposition profile is critical. This deposition profile is commonly determined using forward models such as beam or ray tracing. Recent numerical and experimental studies have shown that small-angle scattering of the EC beam as it passes through the turbulent plasma edge can cause significant broadening of the effective deposition profile, leading to considerable underestimation of the deposition width by forward methods. However, traditional inverse methods to determine the deposition profile from measurements overestimate the deposition profile width due to transport broadening. In this work, we implement three novel methods to resolve the EC power deposition profile from measurements that counteract transport broadening by simultaneously resolving transport and power deposition. We validate their assumptions and compare the results from these methods to the traditional break-in-slope method as well as to the TORAY ray-tracing code in a set of DIII-D discharges spanning five different confinement modes. We show that the four different inverse methods, novel and established, paint a consistent picture of deposition broadening. Specifically, we show that the measured power deposition profile is between 1.6 and 3.6 times wider than the TORAY profiles. Moreover, we show the considerable consequences that this level of broadening can have for ITER.
- 27 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 7, 247-252
Estimating Space-Dependent Coefficients for 1D Transport Using Gaussian Processes as State Estimator in the Frequency Domain
This letter presents a method to estimate the space-dependent transport coefficients (diffusion, convection, reaction, and source/sink) for a generic scalar transport model, e.g., heat or mass. As the problem is solved in the frequency domain, the complex valued state as a function of the spatial variable is estimated using Gaussian process regression. The resulting probability density function of the state, together with a semi-discretization of the model, and a linear parameterization of the coefficients are used to determine the maximum likelihood solution for these space-dependent coefficients. The proposed method is illustrated by simulations.
- 27 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 7, 247-252
Estimating Space-Dependent Coefficients for 1D Transport Using Gaussian Processes as State Estimator in the Frequency Domain
This letter presents a method to estimate the space-dependent transport coefficients (diffusion, convection, reaction, and source/sink) for a generic scalar transport model, e.g., heat or mass. As the problem is solved in the frequency domain, the complex valued state as a function of the spatial variable is estimated using Gaussian process regression. The resulting probability density function of the state, together with a semi-discretization of the model, and a linear parameterization of the coefficients are used to determine the maximum likelihood solution for these space-dependent coefficients. The proposed method is illustrated by simulations.
- Open Access
- 1 March 2022
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 58 (3)
LPMLEn–A Frequency Domain Method to Estimate Vertical Streambed Fluxes and Sediment Thermal Properties in Semi‐Infinite and Bounded Domains
This paper presents the LPMLEn, a new method to estimate vertical flux and thermal diffusivity from streambed temperature time series using the frequency domain. The main advantages of this new method are: (a) the use of multiple frequencies and multiple sensors for the parameter estimation; (b) noise/uncertainty handling in an optimal way; (c) the possibility to estimate the parameters with both semi‐infinite and bounded domain models; and (d) the compensation for temperature drifts in the data known as transients. The capabilities of the LPMLEn are demonstrated using both synthetic and field data, highlighting the advantages of the bounded domain model over the semi‐infinite domain model in the parameter estimation process.
- 1 March 2022
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 58 (3)
Open AccessLPMLEn–A Frequency Domain Method to Estimate Vertical Streambed Fluxes and Sediment Thermal Properties in Semi‐Infinite and Bounded Domains
This paper presents the LPMLEn, a new method to estimate vertical flux and thermal diffusivity from streambed temperature time series using the frequency domain. The main advantages of this new method are: (a) the use of multiple frequencies and multiple sensors for the parameter estimation; (b) noise/uncertainty handling in an optimal way; (c) the possibility to estimate the parameters with both semi‐infinite and bounded domain models; and (d) the compensation for temperature drifts in the data known as transients. The capabilities of the LPMLEn are demonstrated using both synthetic and field data, highlighting the advantages of the bounded domain model over the semi‐infinite domain model in the parameter estimation process.
- 1 January 2022
- Published by AIP Publishing in Physics of Plasmas
- Vol. 29 (1) , 010703
Extension of the flux fit method for estimating power deposition profiles
The flux fit method is used to self-consistently estimate the power deposition profile and heat transport profiles from temperature measurements originating from perturbative experiments with a modulated source. This Letter improves on this method by addressing the limitations and assumptions. The most crucial improvement is the additional freedom in the source deposition profile. Allowing for a variable central deposition location and height and including a skewness parameter produces deposition profiles more consistent with the measurement data, but still wider than equilibrium ray tracing in two different DIII-D discharges. Moreover, we show that the quality of the estimated deposition profile is key to the accuracy of diffusivity and convectivity estimates, but inversely, the estimated transport parameters hardly affect the quality of the power deposition estimate. Using this method, we show that the power deposition profile estimate is broadened with respect to ray-tracing by about 1.7–1.8 times in two DIII-D discharges.
- 1 January 2022
- Published by AIP Publishing in Physics of Plasmas
- Vol. 29 (1) , 010703
Extension of the flux fit method for estimating power deposition profiles
The flux fit method is used to self-consistently estimate the power deposition profile and heat transport profiles from temperature measurements originating from perturbative experiments with a modulated source. This Letter improves on this method by addressing the limitations and assumptions. The most crucial improvement is the additional freedom in the source deposition profile. Allowing for a variable central deposition location and height and including a skewness parameter produces deposition profiles more consistent with the measurement data, but still wider than equilibrium ray tracing in two different DIII-D discharges. Moreover, we show that the quality of the estimated deposition profile is key to the accuracy of diffusivity and convectivity estimates, but inversely, the estimated transport parameters hardly affect the quality of the power deposition estimate. Using this method, we show that the power deposition profile estimate is broadened with respect to ray-tracing by about 1.7–1.8 times in two DIII-D discharges.
- Top Cited PapersOpen Access
- 17 February 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-9
Real-time feedback control of the impurity emission front in tokamak divertor plasmas
In magnetic confinement thermonuclear fusion the exhaust of heat and particles from the core remains a major challenge. Heat and particles leaving the core are transported via open magnetic field lines to a region of the reactor wall, called the divertor. Unabated, the heat and particle fluxes may become intolerable and damage the divertor. Controlled ‘plasma detachment’, a regime characterized by both a large reduction in plasma pressure and temperature at the divertor target, is required to reduce fluxes onto the divertor. Here we report a systematic approach towards achieving this critical need through feedback control of impurity emission front locations and its experimental demonstration. Our approach comprises a combination of real-time plasma diagnostic utilization, dynamic characterization of the plasma in proximity to the divertor, and efficient, reliable offline feedback controller design.
- 17 February 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-9
Top Cited PapersOpen AccessReal-time feedback control of the impurity emission front in tokamak divertor plasmas
In magnetic confinement thermonuclear fusion the exhaust of heat and particles from the core remains a major challenge. Heat and particles leaving the core are transported via open magnetic field lines to a region of the reactor wall, called the divertor. Unabated, the heat and particle fluxes may become intolerable and damage the divertor. Controlled ‘plasma detachment’, a regime characterized by both a large reduction in plasma pressure and temperature at the divertor target, is required to reduce fluxes onto the divertor. Here we report a systematic approach towards achieving this critical need through feedback control of impurity emission front locations and its experimental demonstration. Our approach comprises a combination of real-time plasma diagnostic utilization, dynamic characterization of the plasma in proximity to the divertor, and efficient, reliable offline feedback controller design.