Jianjun Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianjun Jiang has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
Junzhen Chen
Shaanxi Engineering Research Center for Digital Manufacturing Technology Northwestern Polytechnical University Xi'an 710072 China
9 shared publications- Yujun Li
School of Mechanical Engineering Northwestern Polytechnical University Xi'an People's Republic of China
9 shared publications Guoyu Yang
School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an, China
8 shared publicationsJunbiao Wang
Northwestern Polytechnical University
8 shared publicationsLiangchao Fang
Shaanxi Engineering Research Center for Digital Manufacturing Technology, Northwestern Polytechnical University, Xi’an, People’s Republic of China
8 shared publicationsChao Deng
Northwestern Polytechnical University
7 shared publications
Latest Publications
- Open Access
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
ZIF-67-Derived ZnO/Co3O4 Composites with Unique Nanoflower-Polyhedron Morphology for High-Performance Formaldehyde Detection
In recent years, constructing metal oxide semiconductors (MOSs) heterostructures derived from metal-organic frameworks (MOFs) to enhance the performance of gas sensors has become a promising and emerging strategy. In this study, an in-situ derivation method was employed to load ZIF-67 polyhedra onto the surface of ZnO nanoflowers, and a stepwise calcination strategy was employed to successfully fabricate a ZnO/Co3O4 composite heterostructure with a unique "nanoflower-polyhedron" morphology. Compared to pure ZnO, the optimal working temperature of ZnO/Co3O4 was reduced from 220°C to 200°C, and the sensor exhibited superior formaldehyde sensing properties. Specifically, the ZnO/Co3O4-4 sensor demonstrated a high response of 92 to 50 ppm formaldehyde at 200°C, which is 11.5 times greater than that of pure ZnO, along with fast response and recovery times of 2 s and 29 s, excellent selectivity, and long-term stability over 10 weeks. Further investigation into the enhancement mechanism of the ZnO/Co3O4 composite revealed that the improvement in gas-sensing performance is primarily attributed to the synergistic effects of the p-n heterojunction formation, unique microstructure, Co3O4 catalytic activity, defect engineering, and bandgap engineering. This study provides a feasible new approach for the design of high-performance MOF-derived MOS heterostructures.
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessZIF-67-Derived ZnO/Co3O4 Composites with Unique Nanoflower-Polyhedron Morphology for High-Performance Formaldehyde Detection
In recent years, constructing metal oxide semiconductors (MOSs) heterostructures derived from metal-organic frameworks (MOFs) to enhance the performance of gas sensors has become a promising and emerging strategy. In this study, an in-situ derivation method was employed to load ZIF-67 polyhedra onto the surface of ZnO nanoflowers, and a stepwise calcination strategy was employed to successfully fabricate a ZnO/Co3O4 composite heterostructure with a unique "nanoflower-polyhedron" morphology. Compared to pure ZnO, the optimal working temperature of ZnO/Co3O4 was reduced from 220°C to 200°C, and the sensor exhibited superior formaldehyde sensing properties. Specifically, the ZnO/Co3O4-4 sensor demonstrated a high response of 92 to 50 ppm formaldehyde at 200°C, which is 11.5 times greater than that of pure ZnO, along with fast response and recovery times of 2 s and 29 s, excellent selectivity, and long-term stability over 10 weeks. Further investigation into the enhancement mechanism of the ZnO/Co3O4 composite revealed that the improvement in gas-sensing performance is primarily attributed to the synergistic effects of the p-n heterojunction formation, unique microstructure, Co3O4 catalytic activity, defect engineering, and bandgap engineering. This study provides a feasible new approach for the design of high-performance MOF-derived MOS heterostructures.
- Top Cited Papers
Chemiresistive Gas Sensors: Materials, Mechanisms, and Applications on the Road to Intelligence and Multifunctionality
Advances in chemiresistive gas sensors (CGSs) are driving their evolution toward multifunctionality and intelligence. Nevertheless, it remains crucial to track the latest developments and clarify the key contributions of materials and structural engineering in enabling these capabilities. First, this review describes the key performance metrics of CGSs and summarizes the characteristics and transduction mechanisms of representative sensing materials, including metal–oxide semiconductors (MOSs), carbon nanomaterials (CNs), conducting polymers (CPs), MXenes, two‐dimensional transition‐metal dichalcogenides (2D TMDs), and other emerging materials. Next, major performance‐enhancement strategies are discussed in response to the intrinsic limitations of CGSs, covering nanostructure and morphology engineering, heterostructure construction, chemical doping and surface functionalization, and composite/hybrid engineering, as well as humidity interference and corresponding mitigation approaches. Further, advances in applications spanning environmental, medical, industrial, and food‐related scenarios are surveyed, with a focus on material selection and performance evaluation. Building on these developments, the latest progress in advanced CGSs is highlighted, particularly wearable sensing, self‐powered operation, machine‐learning (ML)‐assisted pattern recognition, and integration with wireless communication systems. Finally, the major challenges currently facing the field are identified, and perspectives on future research trends are provided.
Top Cited PapersChemiresistive Gas Sensors: Materials, Mechanisms, and Applications on the Road to Intelligence and Multifunctionality
Advances in chemiresistive gas sensors (CGSs) are driving their evolution toward multifunctionality and intelligence. Nevertheless, it remains crucial to track the latest developments and clarify the key contributions of materials and structural engineering in enabling these capabilities. First, this review describes the key performance metrics of CGSs and summarizes the characteristics and transduction mechanisms of representative sensing materials, including metal–oxide semiconductors (MOSs), carbon nanomaterials (CNs), conducting polymers (CPs), MXenes, two‐dimensional transition‐metal dichalcogenides (2D TMDs), and other emerging materials. Next, major performance‐enhancement strategies are discussed in response to the intrinsic limitations of CGSs, covering nanostructure and morphology engineering, heterostructure construction, chemical doping and surface functionalization, and composite/hybrid engineering, as well as humidity interference and corresponding mitigation approaches. Further, advances in applications spanning environmental, medical, industrial, and food‐related scenarios are surveyed, with a focus on material selection and performance evaluation. Building on these developments, the latest progress in advanced CGSs is highlighted, particularly wearable sensing, self‐powered operation, machine‐learning (ML)‐assisted pattern recognition, and integration with wireless communication systems. Finally, the major challenges currently facing the field are identified, and perspectives on future research trends are provided.
- 10 September 2025
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 32 (9) , 2294-2303
A broadband metamaterial wave absorber based on carbonyl iron powder modified dielectric layer
- 10 September 2025
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 32 (9) , 2294-2303
A broadband metamaterial wave absorber based on carbonyl iron powder modified dielectric layer
- 12 August 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (20)
Tailoring Interlayer Architecture of PBONF/MXene for Enhanced Interlaminar Fracture Toughness and Electromagnetic Interference Shielding in Carbon Fiber‐Reinforced Polymer
Interleaving is a strategy to enhance the interlaminar fracture toughness of carbon fiber‐reinforced polymer (CFRP) laminates and impart multifunctionality. In this study, two types of interlayers composed of poly( p ‐phenylene‐2, 6‐benzobisoxazole) nanofibers (PBONF) and Ti 3 C 2 T x MXene nanosheets are introduced into CFRPs. The layered PBONF/MXene film and porous PBONF/MXene aerogel are prepared by vacuum‐assisted filtration and freeze‐drying, respectively. The influence of interlayer architecture on the interlaminar fracture toughness and electromagnetic interference (EMI) shielding effectiveness is investigated. Mode I (G Ic ) and Mode II (G IIc ) fracture toughness are evaluated using double cantilever beam and end‐notched flexure tests, respectively. Compared to the pristine laminate, both interlayers improved fracture toughness, with the aerogel showing prominent effects, achieving G Ic and G IIc improvements of 86.26% and 48.66%, respectively. Fractography revealed that the porous structure of aerogel hindered crack propagation by inducing complex crack paths and greater energy dissipation. Furthermore, the film‐interleaved laminate exhibited an optimal EMI shielding effectiveness of 37.95 dB, due to enhanced internal absorption from MXene. These findings indicate that tailoring interlayer architecture impacts the balance between interlaminar toughening and EMI shielding, offering design pathways for multifunctional composites.
- 12 August 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (20)
Tailoring Interlayer Architecture of PBONF/MXene for Enhanced Interlaminar Fracture Toughness and Electromagnetic Interference Shielding in Carbon Fiber‐Reinforced Polymer
Interleaving is a strategy to enhance the interlaminar fracture toughness of carbon fiber‐reinforced polymer (CFRP) laminates and impart multifunctionality. In this study, two types of interlayers composed of poly( p ‐phenylene‐2, 6‐benzobisoxazole) nanofibers (PBONF) and Ti 3 C 2 T x MXene nanosheets are introduced into CFRPs. The layered PBONF/MXene film and porous PBONF/MXene aerogel are prepared by vacuum‐assisted filtration and freeze‐drying, respectively. The influence of interlayer architecture on the interlaminar fracture toughness and electromagnetic interference (EMI) shielding effectiveness is investigated. Mode I (G Ic ) and Mode II (G IIc ) fracture toughness are evaluated using double cantilever beam and end‐notched flexure tests, respectively. Compared to the pristine laminate, both interlayers improved fracture toughness, with the aerogel showing prominent effects, achieving G Ic and G IIc improvements of 86.26% and 48.66%, respectively. Fractography revealed that the porous structure of aerogel hindered crack propagation by inducing complex crack paths and greater energy dissipation. Furthermore, the film‐interleaved laminate exhibited an optimal EMI shielding effectiveness of 37.95 dB, due to enhanced internal absorption from MXene. These findings indicate that tailoring interlayer architecture impacts the balance between interlaminar toughening and EMI shielding, offering design pathways for multifunctional composites.
- 6 August 2025
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 102 (7) , 581-603
Influence of Ti 3 C 2 T x MXene on the shear and flexural performance of adhesively bonded CFRP Joints
- 6 August 2025
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 102 (7) , 581-603
Influence of Ti 3 C 2 T x MXene on the shear and flexural performance of adhesively bonded CFRP Joints
- 6 June 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (17) , 15749-15765
Design and Optimization of Gradient Foam Core Sandwich Structures With Superior Microwave Absorption Performance
With the increasing demand for omnidirectional wideband radar stealth performance in fifth‐generation fighter jets, foam sandwich structures used in aerospace must possess excellent microwave absorption (MA) capabilities. In this study, 20 types of rigid closed‐cell microwave‐absorbing composite foams were prepared using a microsphere foaming method, with short carbon fibers (SCF), multi‐walled carbon nanotubes (MWCNT), and carbonyl iron powder (CIP) as absorbing agents and epoxy resin (EP) as the matrix. The effects of absorbing agents' types and contents on the microwave absorption performance of the foams in the 2–18 GHz range were analyzed. Based on the experimental data, a data enhancement method was employed to expand the material database of foams. Subsequently, a multi‐objective optimization of gradient foam sandwich structures (GFSS) was conducted using a genetic algorithm. The effective absorption bandwidth (EAB) of the sandwich structures ranged from 13.9 to 16.0 GHz, the minimum reflection loss (RL min ) reached −94.4 dB, and the ratio of EAB to density ( η ) was 34.8–50.2 GHz g −1 cm 3 . Additionally, the gradient foam with a thickness of 20 mm exhibited an EAB of 16.0 GHz and an η value of 60.1 GHz g −1 cm 3 . The effectiveness of the optimization results was validated through experimental measurements. A finite element analysis (FEA) model was established to investigate the broadband MA mechanisms of the GFSS. Finally, the bending performance of the GFSS was evaluated by conducting three‐point bending tests. This study provides an effective approach for the design and fabrication of lightweight GFSS with broadband microwave absorption functionality.
- 6 June 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (17) , 15749-15765
Design and Optimization of Gradient Foam Core Sandwich Structures With Superior Microwave Absorption Performance
With the increasing demand for omnidirectional wideband radar stealth performance in fifth‐generation fighter jets, foam sandwich structures used in aerospace must possess excellent microwave absorption (MA) capabilities. In this study, 20 types of rigid closed‐cell microwave‐absorbing composite foams were prepared using a microsphere foaming method, with short carbon fibers (SCF), multi‐walled carbon nanotubes (MWCNT), and carbonyl iron powder (CIP) as absorbing agents and epoxy resin (EP) as the matrix. The effects of absorbing agents' types and contents on the microwave absorption performance of the foams in the 2–18 GHz range were analyzed. Based on the experimental data, a data enhancement method was employed to expand the material database of foams. Subsequently, a multi‐objective optimization of gradient foam sandwich structures (GFSS) was conducted using a genetic algorithm. The effective absorption bandwidth (EAB) of the sandwich structures ranged from 13.9 to 16.0 GHz, the minimum reflection loss (RL min ) reached −94.4 dB, and the ratio of EAB to density ( η ) was 34.8–50.2 GHz g −1 cm 3 . Additionally, the gradient foam with a thickness of 20 mm exhibited an EAB of 16.0 GHz and an η value of 60.1 GHz g −1 cm 3 . The effectiveness of the optimization results was validated through experimental measurements. A finite element analysis (FEA) model was established to investigate the broadband MA mechanisms of the GFSS. Finally, the bending performance of the GFSS was evaluated by conducting three‐point bending tests. This study provides an effective approach for the design and fabrication of lightweight GFSS with broadband microwave absorption functionality.
- 22 May 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (16) , 14883-14898
Enhancing Mechanical, EMI Shielding, and Thermal Properties of Pitch‐Based Carbon Fiber Composites via MXene /Polydopamine Modification
Mesophase pitch‐based carbon fibers (PCF) are appealing for high‐performance multifunctional composites due to their remarkable elastic modulus and axial electrical and thermal conductivity. However, their inert surfaces result in poor interfacial adhesion with polymer matrices, limiting their full application potential. This work demonstrates a surface modification method using Ti 3 C 2 T x MXene and polydopamine (PDA) to improve the interfacial adhesion and multifunctional potential of PCF/epoxy composites. The MXene/PDA was coated onto PCF using a simple aqueous self‐polymerization technique. PDA acts as a bridge to connect MXene and PCF, while MXene imparts functional properties to PCF. X‐ray photoelectron spectroscopy validated the effective increase in functional groups, and surface analysis demonstrated a considerable increase in surface roughness and surface free energy of PCF. The modified composites performed much better in interfacial properties, with a 51.41% increase in transverse fiber bundle strength and a 55.17% rise in interlaminar shear strength. Furthermore, the electromagnetic interference shielding effectiveness in the X‐band increased from 20.7 dB to 34.8 dB. Concurrently, the through‐thickness thermal conductivity of the composites increased by 36.4%. These findings indicate that interface modification presents a versatile approach to simultaneously enhance the mechanical, electromagnetic shielding, and thermal conductivity performance of PCF‐reinforced epoxy composites, suggesting its potential application in electromagnetic protection and heat dissipation systems for aerospace and electronic equipment.
- 22 May 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (16) , 14883-14898
Enhancing Mechanical, EMI Shielding, and Thermal Properties of Pitch‐Based Carbon Fiber Composites via MXene /Polydopamine Modification
Mesophase pitch‐based carbon fibers (PCF) are appealing for high‐performance multifunctional composites due to their remarkable elastic modulus and axial electrical and thermal conductivity. However, their inert surfaces result in poor interfacial adhesion with polymer matrices, limiting their full application potential. This work demonstrates a surface modification method using Ti 3 C 2 T x MXene and polydopamine (PDA) to improve the interfacial adhesion and multifunctional potential of PCF/epoxy composites. The MXene/PDA was coated onto PCF using a simple aqueous self‐polymerization technique. PDA acts as a bridge to connect MXene and PCF, while MXene imparts functional properties to PCF. X‐ray photoelectron spectroscopy validated the effective increase in functional groups, and surface analysis demonstrated a considerable increase in surface roughness and surface free energy of PCF. The modified composites performed much better in interfacial properties, with a 51.41% increase in transverse fiber bundle strength and a 55.17% rise in interlaminar shear strength. Furthermore, the electromagnetic interference shielding effectiveness in the X‐band increased from 20.7 dB to 34.8 dB. Concurrently, the through‐thickness thermal conductivity of the composites increased by 36.4%. These findings indicate that interface modification presents a versatile approach to simultaneously enhance the mechanical, electromagnetic shielding, and thermal conductivity performance of PCF‐reinforced epoxy composites, suggesting its potential application in electromagnetic protection and heat dissipation systems for aerospace and electronic equipment.