Aishanee Sur
Research Subjects
Aishanee Sur has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- David Charles Powers
Texas A&M University
8 shared publications - Eric D. Bloch
Indiana University
5 shared publications - Andrew A. Ezazi
Department of Chemistry, Texas A&M University, College Station, Texas 77843, USA
3 shared publications Nattamai Bhuvanesh
Department of Chemistry
3 shared publicationsAlexandra M. Antonio
Department of Chemistry and Biochemistry University of Delaware Newark DE 19716 USA
2 shared publications- Andrew Ezazi
Texas A&M University
2 shared publications
Latest Publications
- Open Access
- 4 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (18) , 18627-18632
In Crystallo Synthesis of a Triplet Silver Nitrene
Reactive silver nitrenes are proposed intermediates in Ag-catalyzed C–H amination and olefin aziridination reactions. Synthesis and characterization of reactive Ag nitrenes has proven elusive due to fleeting lifetimes and argentophilic aggregation of Ag(I) precursors in solution. Here, we report the templated in crystallo synthesis and characterization of a mononuclear Ag nitrene supported by a tris(pyrazolyl)borate ligand. Photolytic N2 elimination from the corresponding aryl azide complex yields a structurally defined Ag nitrene with a triplet ground state, as confirmed by crystallography, magnetic measurements, and quantum chemical calculations. This species displays both stoichiometric and catalytic nitrene transfer reactivity, enabling carbazole and indole formation from organic azides. These results leverage in crystallo templating to isolate a mononuclear triplet nitrene of Ag and provide a platform to experimentally elucidate ligand-controlled selectivity in Ag-catalyzed nitrene transfer catalysis.
- 4 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (18) , 18627-18632
Open AccessIn Crystallo Synthesis of a Triplet Silver Nitrene
Reactive silver nitrenes are proposed intermediates in Ag-catalyzed C–H amination and olefin aziridination reactions. Synthesis and characterization of reactive Ag nitrenes has proven elusive due to fleeting lifetimes and argentophilic aggregation of Ag(I) precursors in solution. Here, we report the templated in crystallo synthesis and characterization of a mononuclear Ag nitrene supported by a tris(pyrazolyl)borate ligand. Photolytic N2 elimination from the corresponding aryl azide complex yields a structurally defined Ag nitrene with a triplet ground state, as confirmed by crystallography, magnetic measurements, and quantum chemical calculations. This species displays both stoichiometric and catalytic nitrene transfer reactivity, enabling carbazole and indole formation from organic azides. These results leverage in crystallo templating to isolate a mononuclear triplet nitrene of Ag and provide a platform to experimentally elucidate ligand-controlled selectivity in Ag-catalyzed nitrene transfer catalysis.
- Open Access
- 29 July 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
In situ characterization of post-synthetic metalation in porous salt thin films
Post-synthetic metalation and metathesis chemistry are central to rational synthesis of metal–organic frameworks (MOFs) that are unavailable by direct self-assembly. The inherent microcrystallinity and heterogeneous nature of many MOFs renders characterization of the rate, extent, and distribution of post-synthetic modifications challenging. Here we describe the deposition of optically transparent, permanently porous thin films comprised of peripherally carboxylated free-base porphyrins and cationic porous molecular cages. The films are assembled via layer-by-layer growth controlled by coulombic charge pairing, which allows for systematic control over film thickness. The obtained thin films are optically transparent monoliths that retain the permanent porosity of the corresponding porous salts. Post-synthetic metalation of these films with Mn(HMDS)2 affords the corresponding Mn(II) porphyrin-based materials (HMDS = hexamethyldisilazide). Access to thin films with systematically varied thickness (and thus optical density), combined with in situ spectroscopy, enables the kinetics and extent of metalation to be directly monitored. We demonstrate both structure- and thickness-dependence on metalation kinetics. These results provide a unique window into the molecular-scale mechanisms that underpin materials synthesis.
- 29 July 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
Open AccessIn situ characterization of post-synthetic metalation in porous salt thin films
Post-synthetic metalation and metathesis chemistry are central to rational synthesis of metal–organic frameworks (MOFs) that are unavailable by direct self-assembly. The inherent microcrystallinity and heterogeneous nature of many MOFs renders characterization of the rate, extent, and distribution of post-synthetic modifications challenging. Here we describe the deposition of optically transparent, permanently porous thin films comprised of peripherally carboxylated free-base porphyrins and cationic porous molecular cages. The films are assembled via layer-by-layer growth controlled by coulombic charge pairing, which allows for systematic control over film thickness. The obtained thin films are optically transparent monoliths that retain the permanent porosity of the corresponding porous salts. Post-synthetic metalation of these films with Mn(HMDS)2 affords the corresponding Mn(II) porphyrin-based materials (HMDS = hexamethyldisilazide). Access to thin films with systematically varied thickness (and thus optical density), combined with in situ spectroscopy, enables the kinetics and extent of metalation to be directly monitored. We demonstrate both structure- and thickness-dependence on metalation kinetics. These results provide a unique window into the molecular-scale mechanisms that underpin materials synthesis.
- Open Access
- 2 June 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (12) , 10328-10335
Evaluating the Origins of Aerobic Oxidation Catalysis with TAM-3, a MOF with Accessible Co(II) Sites and Large Pores
Metal-organic frameworks (MOFs) are attractive platforms that merge concepts of homogeneous and heterogeneous catalysis. Catalyst design and optimization are enabled by an array of synthetic methods that offer independent control over the local chemical structure of lattice-embedded metal ions (i.e., ligand identity and geometry) and the long-range materials properties (i.e., porosity). Establishing the origin of catalytic activity in MOF-promoted reactions remains a significant challenge: The relative rates of catalyst turnover and substrate diffusion dictate the extent to which interstitial sites are accessible and operational in catalysis. To minimize the contributions of surface sites in catalysis, materials with large pore dimensions are often sought, however, the impact of pore expansion on the origins of catalytic activity is similarly challenging to establish. Here, we describe TAM-3, a Co(II) based MOF with accessible metal sites supported by a facially coordinating tris-tetrazole ligand set. TAM-3 features large channel-like pores (17 × 23 Å) and promotes aerobic C–H oxidation and olefin epoxidation. Using a set of simple kinetics experiments, based on the analysis of kinetic isotope effects and olefin oxidation diastereoselectivities, we demonstrate that despite the large pores, interstitial metal ions do not significantly contribute to the observed substrate oxidation. This study highlights the importance of conducting kinetic experiments to assess the origin of apparent catalytic activity with MOFs and the challenge of harnessing reactive oxidants with microporous catalyst materials.
- 2 June 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (12) , 10328-10335
Open AccessEvaluating the Origins of Aerobic Oxidation Catalysis with TAM-3, a MOF with Accessible Co(II) Sites and Large Pores
Metal-organic frameworks (MOFs) are attractive platforms that merge concepts of homogeneous and heterogeneous catalysis. Catalyst design and optimization are enabled by an array of synthetic methods that offer independent control over the local chemical structure of lattice-embedded metal ions (i.e., ligand identity and geometry) and the long-range materials properties (i.e., porosity). Establishing the origin of catalytic activity in MOF-promoted reactions remains a significant challenge: The relative rates of catalyst turnover and substrate diffusion dictate the extent to which interstitial sites are accessible and operational in catalysis. To minimize the contributions of surface sites in catalysis, materials with large pore dimensions are often sought, however, the impact of pore expansion on the origins of catalytic activity is similarly challenging to establish. Here, we describe TAM-3, a Co(II) based MOF with accessible metal sites supported by a facially coordinating tris-tetrazole ligand set. TAM-3 features large channel-like pores (17 × 23 Å) and promotes aerobic C–H oxidation and olefin epoxidation. Using a set of simple kinetics experiments, based on the analysis of kinetic isotope effects and olefin oxidation diastereoselectivities, we demonstrate that despite the large pores, interstitial metal ions do not significantly contribute to the observed substrate oxidation. This study highlights the importance of conducting kinetic experiments to assess the origin of apparent catalytic activity with MOFs and the challenge of harnessing reactive oxidants with microporous catalyst materials.
- Open Access
- 19 May 2025
- Published by American Chemical Society (ACS) in ACS Central Science
- Vol. 11 (6) , 834-842
In Crystallo Photochemistry: Reimagining Synthetic Tractability with Transparent Single-Crystalline Flasks
Expanding the boundaries of synthetic tractability of what molecules can be synthesized and isolated is an eternal challenge for synthetic chemists. The development of new synthetic methods and strategies enables the properties and potential functions of novel molecular targets to be experimentally evaluated. In the context of catalysis, predictable synthetic strategies are often available to access kinetically persistent intermediates such as catalyst resting states. In contrast, synthesis and characterization of the reactive intermediates are often not possible due to the fleeting lifetimes of these species. In crystallo photochemistry combines single-crystal matrix isolation with cryogenic photochemistry to enable reactive intermediates to be synthesized under conditions in which they are persistent and can be (crystallographically) characterized. This Outlook highlights key achievements of in crystallo photochemistry as well as discusses opportunities and challenges that confront realization of the potential of in crystallo synthesis to redefine the boundaries of synthetic tractability.
- 19 May 2025
- Published by American Chemical Society (ACS) in ACS Central Science
- Vol. 11 (6) , 834-842
Open AccessIn Crystallo Photochemistry: Reimagining Synthetic Tractability with Transparent Single-Crystalline Flasks
Expanding the boundaries of synthetic tractability of what molecules can be synthesized and isolated is an eternal challenge for synthetic chemists. The development of new synthetic methods and strategies enables the properties and potential functions of novel molecular targets to be experimentally evaluated. In the context of catalysis, predictable synthetic strategies are often available to access kinetically persistent intermediates such as catalyst resting states. In contrast, synthesis and characterization of the reactive intermediates are often not possible due to the fleeting lifetimes of these species. In crystallo photochemistry combines single-crystal matrix isolation with cryogenic photochemistry to enable reactive intermediates to be synthesized under conditions in which they are persistent and can be (crystallographically) characterized. This Outlook highlights key achievements of in crystallo photochemistry as well as discusses opportunities and challenges that confront realization of the potential of in crystallo synthesis to redefine the boundaries of synthetic tractability.
- Open Access
- 5 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Optically Transparent Porous Salt Thin Films Enable In Situ Characterization of Structure- and Depth-Dependent Post-Synthetic Metalation
Post-synthetic metalation and metathesis chemistry are central to rational synthesis of metal-organic frameworks (MOFs) that are unavailable by direct self-assembly. The rate, extent, and distribution of post-synthetically modified sites is challenging to characterize due to the microcrystallinity and heterogeneity of many materials. Here we describe the deposition of optically transparent, permanently porous thin films comprised of a peripherally carboxylated free-base porphyrin and a cationic porous molecular cage. The films are assembled via layer-by-layer growth controlled by Coulombic charge pairing, which allows for systematic control over the thickness of the obtained films. The obtained thin films are optically transparent monoliths that retain the permanent porosity of the corresponding porous salts. Postsynthetic metalation of these films with Mn(HMDS)2 affords the corresponding Mn(II) porphyrin-based materials (HMDS = hexamethyldisilazide). In situ spectroscopic monitoring, made possible by the optical transparency and synthetically controlled optical density of the films, enables metalation kinetics and extent to be directly monitored. We demonstrate both structure- and thickness-dependence on metalation kinetics. These results provide a unique window into the molecular scale mechanisms that underpin materials synthesis.
- 5 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOptically Transparent Porous Salt Thin Films Enable In Situ Characterization of Structure- and Depth-Dependent Post-Synthetic Metalation
Post-synthetic metalation and metathesis chemistry are central to rational synthesis of metal-organic frameworks (MOFs) that are unavailable by direct self-assembly. The rate, extent, and distribution of post-synthetically modified sites is challenging to characterize due to the microcrystallinity and heterogeneity of many materials. Here we describe the deposition of optically transparent, permanently porous thin films comprised of a peripherally carboxylated free-base porphyrin and a cationic porous molecular cage. The films are assembled via layer-by-layer growth controlled by Coulombic charge pairing, which allows for systematic control over the thickness of the obtained films. The obtained thin films are optically transparent monoliths that retain the permanent porosity of the corresponding porous salts. Postsynthetic metalation of these films with Mn(HMDS)2 affords the corresponding Mn(II) porphyrin-based materials (HMDS = hexamethyldisilazide). In situ spectroscopic monitoring, made possible by the optical transparency and synthetically controlled optical density of the films, enables metalation kinetics and extent to be directly monitored. We demonstrate both structure- and thickness-dependence on metalation kinetics. These results provide a unique window into the molecular scale mechanisms that underpin materials synthesis.
- 2 May 2024
- Published by American Chemical Society (ACS) in ACS Chemical Health & Safety
- Vol. 31 (4) , 291-299
Empowering Student Laboratory Safety Officer Programs to Strengthen Academic Safety Culture
A student Laboratory Safety Officer (LSO) program formalizes a position often found within academic institutions. Through clearly defined responsibilities and effective communication between an LSO and their principal investigators, environmental health and safety office, and department administrators, this program can be effectively used to establish a baseline for safety standards. This article outlines pathways for an institution to establish or strengthen a student LSO program. The strength within this program goes beyond defined responsibilities, where the program’s initiatives can deepen a department-wide community while improving access to resources and advancing leadership skills. The common hurdles faced by these programs are discussed at length for new and existing programs to gain insights into how to address those obstacles while also elucidating the pathways to empower the program. Faculty and student buy-in is fundamental for the success of this program, which often is best addressed by giving visibility to the program itself and its outstanding participants. This article gives an overview of laboratory safety teams (LSTs), a separate graduate student-led laboratory safety initiative, and how an LST can be used to support and even serve as an LSO program. The implementation of a student LSO program has the potential to foster a greater sense of community and safety culture within a department, while giving students the opportunity to enhance their leadership and laboratory skills.
- 2 May 2024
- Published by American Chemical Society (ACS) in ACS Chemical Health & Safety
- Vol. 31 (4) , 291-299
Empowering Student Laboratory Safety Officer Programs to Strengthen Academic Safety Culture
A student Laboratory Safety Officer (LSO) program formalizes a position often found within academic institutions. Through clearly defined responsibilities and effective communication between an LSO and their principal investigators, environmental health and safety office, and department administrators, this program can be effectively used to establish a baseline for safety standards. This article outlines pathways for an institution to establish or strengthen a student LSO program. The strength within this program goes beyond defined responsibilities, where the program’s initiatives can deepen a department-wide community while improving access to resources and advancing leadership skills. The common hurdles faced by these programs are discussed at length for new and existing programs to gain insights into how to address those obstacles while also elucidating the pathways to empower the program. Faculty and student buy-in is fundamental for the success of this program, which often is best addressed by giving visibility to the program itself and its outstanding participants. This article gives an overview of laboratory safety teams (LSTs), a separate graduate student-led laboratory safety initiative, and how an LST can be used to support and even serve as an LSO program. The implementation of a student LSO program has the potential to foster a greater sense of community and safety culture within a department, while giving students the opportunity to enhance their leadership and laboratory skills.
- Open Access
- 6 April 2020
- Published by Wiley in Angewandte Chemie
- Vol. 132 (27) , 10970-10975
Atomically Precise Crystalline Materials Based on Kinetically Inert Metal Ions via Reticular Mechanopolymerization
Atomistic control of the coordination environment of lattice ions and the distribution of metal sites within crystalline mixed‐metal coordination polymers remain significant synthetic challenges. Herein is reported the mechanochemical synthesis of a reticular family of crystalline heterobimetallic metal–organic frameworks (MOFs) is now achieved by polymerization of molecular Ru2[II,III] complexes, featuring unprotected carboxylic acid substituents, with Cu(OAc)2. The resulting crystalline heterobimetallic MOFs are solid solutions of Ru2 and Cu2 sites housed within [M3L2] phases. The developed mechanochemical strategy is modular and allows for systematic control of the primary coordination sphere of the Ru2 sites within an isoreticular family of materials. This strategy is anticipated to provide a rational approach to atomically precise mixed‐metal materials.
- 6 April 2020
- Published by Wiley in Angewandte Chemie
- Vol. 132 (27) , 10970-10975
Open AccessAtomically Precise Crystalline Materials Based on Kinetically Inert Metal Ions via Reticular Mechanopolymerization
Atomistic control of the coordination environment of lattice ions and the distribution of metal sites within crystalline mixed‐metal coordination polymers remain significant synthetic challenges. Herein is reported the mechanochemical synthesis of a reticular family of crystalline heterobimetallic metal–organic frameworks (MOFs) is now achieved by polymerization of molecular Ru2[II,III] complexes, featuring unprotected carboxylic acid substituents, with Cu(OAc)2. The resulting crystalline heterobimetallic MOFs are solid solutions of Ru2 and Cu2 sites housed within [M3L2] phases. The developed mechanochemical strategy is modular and allows for systematic control of the primary coordination sphere of the Ru2 sites within an isoreticular family of materials. This strategy is anticipated to provide a rational approach to atomically precise mixed‐metal materials.
- Open Access
- 6 April 2020
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 59 (27) , 10878-10883
Atomically Precise Crystalline Materials Based on Kinetically Inert Metal Ions via Reticular Mechanopolymerization
Atomistic control of the coordination environment of lattice ions and the distribution of metal sites within crystalline mixed‐metal coordination polymers remain significant synthetic challenges. Herein is reported the mechanochemical synthesis of a reticular family of crystalline heterobimetallic metal–organic frameworks (MOFs) is now achieved by polymerization of molecular Ru2[II,III] complexes, featuring unprotected carboxylic acid substituents, with Cu(OAc)2. The resulting crystalline heterobimetallic MOFs are solid solutions of Ru2 and Cu2 sites housed within [M3L2] phases. The developed mechanochemical strategy is modular and allows for systematic control of the primary coordination sphere of the Ru2 sites within an isoreticular family of materials. This strategy is anticipated to provide a rational approach to atomically precise mixed‐metal materials.
- 6 April 2020
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 59 (27) , 10878-10883
Open AccessAtomically Precise Crystalline Materials Based on Kinetically Inert Metal Ions via Reticular Mechanopolymerization
Atomistic control of the coordination environment of lattice ions and the distribution of metal sites within crystalline mixed‐metal coordination polymers remain significant synthetic challenges. Herein is reported the mechanochemical synthesis of a reticular family of crystalline heterobimetallic metal–organic frameworks (MOFs) is now achieved by polymerization of molecular Ru2[II,III] complexes, featuring unprotected carboxylic acid substituents, with Cu(OAc)2. The resulting crystalline heterobimetallic MOFs are solid solutions of Ru2 and Cu2 sites housed within [M3L2] phases. The developed mechanochemical strategy is modular and allows for systematic control of the primary coordination sphere of the Ru2 sites within an isoreticular family of materials. This strategy is anticipated to provide a rational approach to atomically precise mixed‐metal materials.
- Open Access
- 21 February 2020
- Published by American Chemical Society (ACS) in ChemRxiv
Atomically Precise Crystalline Materials Based on Kinetically Inert Metal Ions via Reticular Mechanopolymerization
The incorporation of kinetically inert metal ions as structural elements in crystalline coordination polymers is a synthetic challenge. While a small family of materials based on inert ions has been prepared (i.e. Cr(III)-based MIL-100, MIL-101, and [Ru6(btc)4Cl3]), general strategies that enable reticular synthesis have not been reported. Here we describe the mechanochemical synthesis of a reticular family of crystalline Ru2[II,III]-based materials by polymerization of molecular Ru2 complexes, featuring unprotected carboxylic acid substituents, with Cu(OAc)2. The resulting crystalline heterobimetallic MOFs are solid-solutions of Ru2 and Cu2 sites housed within [M3L2] phases. The developed mechanochemical strategy is modular and allows for control of the primary coordination sphere of the Ru2 sites. We anticipate the strategy will provide a rational approach to incorporation of kinetically inert ions in porous crystalline coordination networks, generating a class of atomically precise mixed-metal materials.
- 21 February 2020
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessAtomically Precise Crystalline Materials Based on Kinetically Inert Metal Ions via Reticular Mechanopolymerization
The incorporation of kinetically inert metal ions as structural elements in crystalline coordination polymers is a synthetic challenge. While a small family of materials based on inert ions has been prepared (i.e. Cr(III)-based MIL-100, MIL-101, and [Ru6(btc)4Cl3]), general strategies that enable reticular synthesis have not been reported. Here we describe the mechanochemical synthesis of a reticular family of crystalline Ru2[II,III]-based materials by polymerization of molecular Ru2 complexes, featuring unprotected carboxylic acid substituents, with Cu(OAc)2. The resulting crystalline heterobimetallic MOFs are solid-solutions of Ru2 and Cu2 sites housed within [M3L2] phases. The developed mechanochemical strategy is modular and allows for control of the primary coordination sphere of the Ru2 sites. We anticipate the strategy will provide a rational approach to incorporation of kinetically inert ions in porous crystalline coordination networks, generating a class of atomically precise mixed-metal materials.