Wenpu Geng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wenpu Geng has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Yang Yue
School of Information and Communications Engineering, Xi’an Jiaotong University, Xi’an, China
37 shared publications - Yuxi Fang
Institute of Modern Optics, Nankai University, Tianjin, China
28 shared publications - Zhongqi Pan
University of Louisiana at Lafayette
23 shared publications Changjing Bao
Department of Electrical Engineering, University of Southern California, Los Angeles, CA, USA
17 shared publications- Yingning Wang
University of Southern California
16 shared publications - Wenqian Zhao
School of Information and Communications Engineering, Xian Jiaotong University, Xian, China
12 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 62 (5) , 6800712
Beyond Three-Octave OAM Supercontinuum Generation in ZBLAN Fiber With Concentric Rings
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 62 (5) , 6800712
Beyond Three-Octave OAM Supercontinuum Generation in ZBLAN Fiber With Concentric Rings
- 1 June 2026
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 43 (6) , 1328
Supercontinuum generation of orbital angular momentum modes in a ZBLAN photonic crystal fiber
Fluoride glasses, known for their ultra-wide transparency window, have been extensively studied for mid-infrared supercontinuum generation. Orbital angular momentum (OAM) modes, characterized by unique helical phase structures, have found broad applications in optical communications, particle manipulation, and optical imaging. Supercontinuum generation based on OAM modes offers the potential to significantly broaden the spectral range, enabling operation across a wider set of wavelength bands. Photonic crystal fibers (PCFs), with their high refractive index contrast due to the periodic arrangement of air holes, allow for strong confinement of OAM modes and reduced mode leakage. In this work, we propose a ZBLAN (ZrF 4 −BaF 2 −LaF 3 −AlF 3 −NaF) photonic crystal fiber designed for efficient OAM-mode supercontinuum generation. By launching a pulse with 700 kW peak power and 50 fs duration at 2150 nm, we demonstrate that the OAM 1,1 -mode supercontinuum spectrum extends up to 5500 nm with coherence exceeding 0.99 after 3.5 cm of propagation. Furthermore, the OAM 4,1 mode generates a supercontinuum spanning from 1750 to 6640 nm without requiring a significant increase in peak pump power. Compared with conventional optical fibers, the proposed ZBLAN PCF achieves broader spectral coverage with lower peak power requirements and enhanced design flexibility.
- 1 June 2026
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 43 (6) , 1328
Supercontinuum generation of orbital angular momentum modes in a ZBLAN photonic crystal fiber
Fluoride glasses, known for their ultra-wide transparency window, have been extensively studied for mid-infrared supercontinuum generation. Orbital angular momentum (OAM) modes, characterized by unique helical phase structures, have found broad applications in optical communications, particle manipulation, and optical imaging. Supercontinuum generation based on OAM modes offers the potential to significantly broaden the spectral range, enabling operation across a wider set of wavelength bands. Photonic crystal fibers (PCFs), with their high refractive index contrast due to the periodic arrangement of air holes, allow for strong confinement of OAM modes and reduced mode leakage. In this work, we propose a ZBLAN (ZrF 4 −BaF 2 −LaF 3 −AlF 3 −NaF) photonic crystal fiber designed for efficient OAM-mode supercontinuum generation. By launching a pulse with 700 kW peak power and 50 fs duration at 2150 nm, we demonstrate that the OAM 1,1 -mode supercontinuum spectrum extends up to 5500 nm with coherence exceeding 0.99 after 3.5 cm of propagation. Furthermore, the OAM 4,1 mode generates a supercontinuum spanning from 1750 to 6640 nm without requiring a significant increase in peak pump power. Compared with conventional optical fibers, the proposed ZBLAN PCF achieves broader spectral coverage with lower peak power requirements and enhanced design flexibility.
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 62 (2) , 1-8
Broadband Supercontinuum Generation for Orbital Angular Momentum Modes in Graded-Index Double-Ring-Core Fiber
Orbital angular momentum (OAM), characterized by its unique spatial field distribution, has been extensively studied and applied in various fields. In many applications, an OAM beam with coverage over a specific frequency band is required, and supercontinuum (SC) generation presents a viable solution to provide a broadband OAM source. The launch of a short pulse into a specially designed fiber with flat dispersion across a broad wavelength range leads to broadband SC generation through nonlinear spectral broadening during propagation. In this study, we propose a dual concentric ring fiber design that achieves a flat and near-zero dispersion profile over a wavelength range extending up to 3435 nm, featuring four zero-dispersion wavelengths for the OAM mode. The zero-dispersion wavelengths can be precisely tuned by adjusting the structural parameters and the germanium doping concentration in the silica-based fiber. The spectral broadening performance, in terms of flatness and bandwidth, is evaluated under various input pulse and fiber conditions. Simulation results indicate that the OAM3,1 mode SC can span nearly three octaves at the -40 dB level when pumped with a 50-fs, 600-kW Gaussian pulse centered at 1500 nm. With further optimization of the fiber structure for different OAM modes, the generated SC extends beyond 2.82 octaves. Additionally, the effects of different shape factors on the SC characteristics are systematically compared.
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 62 (2) , 1-8
Broadband Supercontinuum Generation for Orbital Angular Momentum Modes in Graded-Index Double-Ring-Core Fiber
Orbital angular momentum (OAM), characterized by its unique spatial field distribution, has been extensively studied and applied in various fields. In many applications, an OAM beam with coverage over a specific frequency band is required, and supercontinuum (SC) generation presents a viable solution to provide a broadband OAM source. The launch of a short pulse into a specially designed fiber with flat dispersion across a broad wavelength range leads to broadband SC generation through nonlinear spectral broadening during propagation. In this study, we propose a dual concentric ring fiber design that achieves a flat and near-zero dispersion profile over a wavelength range extending up to 3435 nm, featuring four zero-dispersion wavelengths for the OAM mode. The zero-dispersion wavelengths can be precisely tuned by adjusting the structural parameters and the germanium doping concentration in the silica-based fiber. The spectral broadening performance, in terms of flatness and bandwidth, is evaluated under various input pulse and fiber conditions. Simulation results indicate that the OAM3,1 mode SC can span nearly three octaves at the -40 dB level when pumped with a 50-fs, 600-kW Gaussian pulse centered at 1500 nm. With further optimization of the fiber structure for different OAM modes, the generated SC extends beyond 2.82 octaves. Additionally, the effects of different shape factors on the SC characteristics are systematically compared.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 62 (2) , 1-10
Beyond Two-Octave Supercontinuum Generation for OAM Modes in Fluoride Fiber
Orbital angular momentum (OAM) has attracted significant research interest due to its unique phase properties. Supercontinuum generation based on OAM mode offers the potential to broaden the spectrum and enable new applications. While silica-based optical fibers have been successful in OAM supercontinuum generation, their strong absorption limits their use in the mid-infrared (>2500 nm) region. Fluoride glasses have been investigated as an alternative for supercontinuum generation, which could extend the corresponding spectrum to the mid-infrared wavelength range. In this work, we propose a ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) ring-core fiber (RCF) for OAM modes supercontinuum generation. After adjusting the structural parameters, the OAM1,1 mode exhibits a flat dispersion distribution from 1500 nm to 5000 nm, with a 0.99 coherence at −40 dB level. Furthermore, after using the same short-wavelength pulses with 1900 nm and 1550 nm incident wavelengths, the spectrum of OAM2,1 mode can be extended to a broadband supercontinuum from 780 nm to 3520 nm after 1.1 cm of transmission, whereas the maximum spectral broadening of the OAM3,1 mode (580 nm to 2620 nm) is reached after only 0.7 cm of transmission, with more than 2-octave and the coherence is >0.99 in all cases.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 62 (2) , 1-10
Beyond Two-Octave Supercontinuum Generation for OAM Modes in Fluoride Fiber
Orbital angular momentum (OAM) has attracted significant research interest due to its unique phase properties. Supercontinuum generation based on OAM mode offers the potential to broaden the spectrum and enable new applications. While silica-based optical fibers have been successful in OAM supercontinuum generation, their strong absorption limits their use in the mid-infrared (>2500 nm) region. Fluoride glasses have been investigated as an alternative for supercontinuum generation, which could extend the corresponding spectrum to the mid-infrared wavelength range. In this work, we propose a ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) ring-core fiber (RCF) for OAM modes supercontinuum generation. After adjusting the structural parameters, the OAM1,1 mode exhibits a flat dispersion distribution from 1500 nm to 5000 nm, with a 0.99 coherence at −40 dB level. Furthermore, after using the same short-wavelength pulses with 1900 nm and 1550 nm incident wavelengths, the spectrum of OAM2,1 mode can be extended to a broadband supercontinuum from 780 nm to 3520 nm after 1.1 cm of transmission, whereas the maximum spectral broadening of the OAM3,1 mode (580 nm to 2620 nm) is reached after only 0.7 cm of transmission, with more than 2-octave and the coherence is >0.99 in all cases.
- 13 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (5) , 1-7
Generation of Dispersive Waves in Double-Ring Core Fiber for High-Order OAM Modes
We propose and design a dual-ring core fiber to generate multiple dispersive waves (DWs) for high-order orbital angular momentum modes. By calculating phase-matching conditions, the quantity and location of DWs can be predicted. When a pulse is pumped in the normal dispersion region, the coherent output spectrum of the OAM20,1 mode spans from 0.6 to $1.7~\mu $ m, exhibiting five DWs located at 630, 740, 890, 1300, and 1510 nm. In addition to optimized fiber parameters to facilitate DWs generation for other OAM modes, the output spectra of OAM18,1 and OAM19,1 modes in the fiber with same structure parameters also exhibit the generation of multiple DWs. The multiple DWs generation method for high-order OAM modes could be applied in fields such as optical coherence tomography, metrology, and spectroscopy.
- 13 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (5) , 1-7
Generation of Dispersive Waves in Double-Ring Core Fiber for High-Order OAM Modes
We propose and design a dual-ring core fiber to generate multiple dispersive waves (DWs) for high-order orbital angular momentum modes. By calculating phase-matching conditions, the quantity and location of DWs can be predicted. When a pulse is pumped in the normal dispersion region, the coherent output spectrum of the OAM20,1 mode spans from 0.6 to $1.7~\mu $ m, exhibiting five DWs located at 630, 740, 890, 1300, and 1510 nm. In addition to optimized fiber parameters to facilitate DWs generation for other OAM modes, the output spectra of OAM18,1 and OAM19,1 modes in the fiber with same structure parameters also exhibit the generation of multiple DWs. The multiple DWs generation method for high-order OAM modes could be applied in fields such as optical coherence tomography, metrology, and spectroscopy.
- 11 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (5) , 1-8
Non-Zero Dispersion-Shifted Fiber With Trench-Assisted Ring Core for Orbital Angular Momentum Modes
Orbital angular momentum (OAM) based multiplexing technology leverages the spatial information of optical fields, offering potential for expanding optical communication capacity and improving spectral efficiency. In this work, a non-zero dispersion-shifted fiber with trench-assisted ring core is proposed for optimized dispersion management. The impact of various parameters on the chromatic dispersion of fiber is investigated. At 1550 nm, the designed fiber exhibits a minimum dispersion of 2.42 ps/nm/km for the EH${}_{\mathbf {1,1}}$ mode and a maximum dispersion of 8.71 ps/nm/km for the HE${}_{\mathbf {14,1}}$ mode. A total of 50 OAM modes adhere to the ITU-T G.655.C standard, with differential mode delays maintained below 4.25 ps/m. Additionally, the fiber features an effective mode area exceeding 982$\mu $ m${}^{\mathbf {2}}$ and a nonlinearity coefficient below$7.23\times 10$ ${}^{\mathbf {-4}}$ /W/m, ensuring robust support for OAM mode transmission.- 11 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (5) , 1-8
Non-Zero Dispersion-Shifted Fiber With Trench-Assisted Ring Core for Orbital Angular Momentum Modes
Orbital angular momentum (OAM) based multiplexing technology leverages the spatial information of optical fields, offering potential for expanding optical communication capacity and improving spectral efficiency. In this work, a non-zero dispersion-shifted fiber with trench-assisted ring core is proposed for optimized dispersion management. The impact of various parameters on the chromatic dispersion of fiber is investigated. At 1550 nm, the designed fiber exhibits a minimum dispersion of 2.42 ps/nm/km for the EH${}_{\mathbf {1,1}}$ mode and a maximum dispersion of 8.71 ps/nm/km for the HE${}_{\mathbf {14,1}}$ mode. A total of 50 OAM modes adhere to the ITU-T G.655.C standard, with differential mode delays maintained below 4.25 ps/m. Additionally, the fiber features an effective mode area exceeding 982$\mu $ m${}^{\mathbf {2}}$ and a nonlinearity coefficient below$7.23\times 10$ ${}^{\mathbf {-4}}$ /W/m, ensuring robust support for OAM mode transmission.- 29 May 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (24) , 245101
Seven-core trench-assisted-graded-index ring fiber for orbital angular momentum modes
To meet the ever-increasing demand for data rate and bandwidth, mode-division-multiplexing technology utilizing orbital angular momentum (OAM) emerges as a promising solution to substantially expand the transmission capacity of optical fiber communication systems. In this work, we propose and numerically investigate a refractive index profile for multi-core fiber, termed the seven-core trench-assisted-graded-index ring fiber. This designed fiber introduces a graded-index profile to enhance OAM mode purity and increase the number of supported modes within a multi-ring core structure. A trench-assisted design is implemented to further suppress the crosstalk between multiple ring cores. To our knowledge, the seven-core trench-assisted-graded-index ring fiber is adopted for the first time to simultaneously maximize OAM purity and minimize the inter-core crosstalk. Through systematic numerical analysis using the finite element method, the optimized fiber can support 266 distinct OAM modes within the C-band. The purity of these OAM modes, synthesized from intrinsic EH modes, exceeds 99.27%. The effective mode area (A eff) for most supported OAM modes reaches 190 µm2, significantly surpassing that of step-index ring core fiber. Through careful optimization of structural parameters, the crosstalk between adjacent cores can be maintained below −90 dB after a 100 km transmission distance for the majority of modes.
- 29 May 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (24) , 245101
Seven-core trench-assisted-graded-index ring fiber for orbital angular momentum modes
To meet the ever-increasing demand for data rate and bandwidth, mode-division-multiplexing technology utilizing orbital angular momentum (OAM) emerges as a promising solution to substantially expand the transmission capacity of optical fiber communication systems. In this work, we propose and numerically investigate a refractive index profile for multi-core fiber, termed the seven-core trench-assisted-graded-index ring fiber. This designed fiber introduces a graded-index profile to enhance OAM mode purity and increase the number of supported modes within a multi-ring core structure. A trench-assisted design is implemented to further suppress the crosstalk between multiple ring cores. To our knowledge, the seven-core trench-assisted-graded-index ring fiber is adopted for the first time to simultaneously maximize OAM purity and minimize the inter-core crosstalk. Through systematic numerical analysis using the finite element method, the optimized fiber can support 266 distinct OAM modes within the C-band. The purity of these OAM modes, synthesized from intrinsic EH modes, exceeds 99.27%. The effective mode area (A eff) for most supported OAM modes reaches 190 µm2, significantly surpassing that of step-index ring core fiber. Through careful optimization of structural parameters, the crosstalk between adjacent cores can be maintained below −90 dB after a 100 km transmission distance for the majority of modes.
- 26 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (1) , 1-7
Extremely Dispersive Fiber With Gradient-High-Index Core and Concentric Ring
In this work, an extremely dispersive optical fiber, incorporating a gradient-index central core and extra concentric ring structure of high-index material, is proposed and tailored specifically for the HE1,1 mode. The impacts of geometrical parameters and doping concentration are explored for the corresponding dispersion characteristics. By systematically adjusting diverse fiber parameters, it becomes evident that alterations in the curve slope discrepancies between the effective index of the central core and the outer ring directly influence both the optical dispersion peak and bandwidth. Consequently, the optical dispersion characteristics of the designed fiber can be customized to meet specific requirements by adjusting both fiber geometry and doping concentration of germanium dioxide. Further refinement of the fiber’s geometric parameters results in achieving a negative chromatic dispersion value of -203,898 ps/(nm $\cdot $ km) at 1547.9 nm. Moreover, the peak dispersion magnitude in our gradient-index fiber design significantly surpasses that of the step-index fiber.
- 26 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (1) , 1-7
Extremely Dispersive Fiber With Gradient-High-Index Core and Concentric Ring
In this work, an extremely dispersive optical fiber, incorporating a gradient-index central core and extra concentric ring structure of high-index material, is proposed and tailored specifically for the HE1,1 mode. The impacts of geometrical parameters and doping concentration are explored for the corresponding dispersion characteristics. By systematically adjusting diverse fiber parameters, it becomes evident that alterations in the curve slope discrepancies between the effective index of the central core and the outer ring directly influence both the optical dispersion peak and bandwidth. Consequently, the optical dispersion characteristics of the designed fiber can be customized to meet specific requirements by adjusting both fiber geometry and doping concentration of germanium dioxide. Further refinement of the fiber’s geometric parameters results in achieving a negative chromatic dispersion value of -203,898 ps/(nm $\cdot $ km) at 1547.9 nm. Moreover, the peak dispersion magnitude in our gradient-index fiber design significantly surpasses that of the step-index fiber.
- 20 September 2024
- Published by Springer Nature
- p. 35-48
Materials for Integrated Photonics