Nadir Kiraz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nadir Kiraz has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Ertuğrul Arpaç
Department of Chemistry, Akdeniz University, Antalya, Turkey
2 shared publicationsEsin Burunkaya
Department of Chemistry, Akdeniz University, Antalya, Turkey
2 shared publications- Hasan Erdem Çamurlu
Akdeniz Üniversitesi, Mühendislik Fakültesi
2 shared publications Meltem Asiltürk
Department of Chemistry, İnönü University, Malatya, Turkey
2 shared publications- Ömer Kesmez
Department of Chemistry, Faculty of Science, Akdeniz University, Antalya, Turkey
2 shared publications Aslı Dörtler Kesici
Department of Material Science and Engineering, Faculty of Engineering and Natural Sciences, Bursa Technical University, Bursa, Turkey
1 shared publication
Latest Publications
- 11 November 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (11) , 1-14
Development of PVA-Based composite hydrogels with enhanced mechanical properties and swelling capacity for nucleus pulposus replacement in intervertebral discs
- 11 November 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (11) , 1-14
Development of PVA-Based composite hydrogels with enhanced mechanical properties and swelling capacity for nucleus pulposus replacement in intervertebral discs
- 27 January 2025
- Published by Springer Nature in Chemical Papers
- Vol. 79 (3) , 1959-1971
Synthesis and characterization of boron oxide nanofibers reinforced methacrylate composites and their flexural strength evaluations
- 27 January 2025
- Published by Springer Nature in Chemical Papers
- Vol. 79 (3) , 1959-1971
Synthesis and characterization of boron oxide nanofibers reinforced methacrylate composites and their flexural strength evaluations
- Open Access
- 21 February 2024
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 48 (1) , 50-64
Synthesis and characterization of surface-modified magnetic mesoporous silicate materials for phosphate adsorption
The magnetic mesoporous silica material, Mag-MCM-41, was synthesized by coating magnetite (Fe3O4) nanoparticles with a mesoporous material called MCM-41. Mag-MCM-41 and modified nanomaterials Mag-MCM-41-NN and Mag-MCM-41-NN-Fe+3 which were modified with aminopropyl functional groups. In water and wastewater, phosphate anions are considered significant contaminants due to their detrimental impact on the environment. They promote the growth of algae, leading to eutrophication. The purpose of this study is to investigate the removal of phosphate anions from aqueous solutions using modified magnetic silica particles. The Mag-MCM-41 material exhibits hexagonal properties and belongs to the class of “mesoporous” materials. It has a surface area of 923 m2.g–1, which was determined through N2 adsorption-desorption isotherms, FTIR, TEM, BET, and SAXS analysis. Kinetic and adsorption isotherm studies were conducted using Mag-MCM-41, Mag-MCM-41-NN, and Mag-MCM-41-NN-Fe+3 adsorbents to examine the behavior of phosphate anions. The kinetic and adsorption isotherm studies of phosphate anions revealed that the adsorption process on Mag-MCM-41, Mag-MCM-41-NN, and Mag-MCM-41-NN-Fe+3 adsorbents followed the chemical adsorption mechanism. Phosphate adsorption on all adsorbents occurred in a monolayer, and the MCM-41-NN-Fe+3 adsorbent exhibited the highest maximum adsorption capacity (qm) value of 112.87 mg.g–1 compared to the other adsorbents.
- 21 February 2024
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 48 (1) , 50-64
Open AccessSynthesis and characterization of surface-modified magnetic mesoporous silicate materials for phosphate adsorption
The magnetic mesoporous silica material, Mag-MCM-41, was synthesized by coating magnetite (Fe3O4) nanoparticles with a mesoporous material called MCM-41. Mag-MCM-41 and modified nanomaterials Mag-MCM-41-NN and Mag-MCM-41-NN-Fe+3 which were modified with aminopropyl functional groups. In water and wastewater, phosphate anions are considered significant contaminants due to their detrimental impact on the environment. They promote the growth of algae, leading to eutrophication. The purpose of this study is to investigate the removal of phosphate anions from aqueous solutions using modified magnetic silica particles. The Mag-MCM-41 material exhibits hexagonal properties and belongs to the class of “mesoporous” materials. It has a surface area of 923 m2.g–1, which was determined through N2 adsorption-desorption isotherms, FTIR, TEM, BET, and SAXS analysis. Kinetic and adsorption isotherm studies were conducted using Mag-MCM-41, Mag-MCM-41-NN, and Mag-MCM-41-NN-Fe+3 adsorbents to examine the behavior of phosphate anions. The kinetic and adsorption isotherm studies of phosphate anions revealed that the adsorption process on Mag-MCM-41, Mag-MCM-41-NN, and Mag-MCM-41-NN-Fe+3 adsorbents followed the chemical adsorption mechanism. Phosphate adsorption on all adsorbents occurred in a monolayer, and the MCM-41-NN-Fe+3 adsorbent exhibited the highest maximum adsorption capacity (qm) value of 112.87 mg.g–1 compared to the other adsorbents.
- Open Access
- 14 September 2022
- Published by Springer Nature in Research Square
Synthesis and characterization of surface modified magnetic mesoporous silicate materials for phosphate adsorption
Magnetic mesoporous silica (Mag-MCM-41) material was synthesized by coating magnetite (Fe3O4) nanoparticles with mesoporous material (MCM-41). Mag-MCM-41 and modified nanomaterials Mag-MCM-41-NN and Mag-MCM-41-NN-Fe+ 3 which were modified with aminopropyl functional groups were prepared for application to phosphate adsorption. Magnetic mesoporous silica (Mag-MCM-41) material shows hexagonal properties and takes part in "mesoporous" material class with a surface area of 923 m2/g that was characterized by N2 adsorption-desorption isotherms, FTIR, TEM, BET and SAXS analyzes. Surface modifications of material were verified through FTIR analysis, elemental analysis, BET and EDTA titration with Fe3+ analysis. Kinetic and adsorption isotherm studies of the phosphate anion were performed using Mag-MCM-41, Mag-MCM-41-NN and Mag-MCM-41-NN-Fe+ 3 adsorbents. After adsorption, the materials could be easily removed from the solution medium with the aid of a magnet. As a result of the kinetic and adsorption isotherm studies of the phosphate anion; it has been determined that the phosphate adsorption method on Mag-MCM-41, Mag-MCM-41-NN and Mag-MCM-41-NN-Fe+ 3 adsorbents was the chemical adsorption method, phosphate adsorption on all adsorbents occured in a single layer and the maximum adsorption capacity of MCM-41-NN-Fe+ 3 adsorbent value (qm) (112.87 mg.g− 1) was higher than other adsorbents.
- 14 September 2022
- Published by Springer Nature in Research Square
Open AccessSynthesis and characterization of surface modified magnetic mesoporous silicate materials for phosphate adsorption
Magnetic mesoporous silica (Mag-MCM-41) material was synthesized by coating magnetite (Fe3O4) nanoparticles with mesoporous material (MCM-41). Mag-MCM-41 and modified nanomaterials Mag-MCM-41-NN and Mag-MCM-41-NN-Fe+ 3 which were modified with aminopropyl functional groups were prepared for application to phosphate adsorption. Magnetic mesoporous silica (Mag-MCM-41) material shows hexagonal properties and takes part in "mesoporous" material class with a surface area of 923 m2/g that was characterized by N2 adsorption-desorption isotherms, FTIR, TEM, BET and SAXS analyzes. Surface modifications of material were verified through FTIR analysis, elemental analysis, BET and EDTA titration with Fe3+ analysis. Kinetic and adsorption isotherm studies of the phosphate anion were performed using Mag-MCM-41, Mag-MCM-41-NN and Mag-MCM-41-NN-Fe+ 3 adsorbents. After adsorption, the materials could be easily removed from the solution medium with the aid of a magnet. As a result of the kinetic and adsorption isotherm studies of the phosphate anion; it has been determined that the phosphate adsorption method on Mag-MCM-41, Mag-MCM-41-NN and Mag-MCM-41-NN-Fe+ 3 adsorbents was the chemical adsorption method, phosphate adsorption on all adsorbents occured in a single layer and the maximum adsorption capacity of MCM-41-NN-Fe+ 3 adsorbent value (qm) (112.87 mg.g− 1) was higher than other adsorbents.
- 27 July 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (10) , 7564-7574
Preparation and characterization of silica based nanoclusters as reinforcement for dental applications
As composite resins become the most extensively utilized material in the field of cosmetic and restorative dentistry, several strategies to overcome dental composites' challenges such as long‐term mechanical failure and secondary caries are continuously being developed. Among them, the design of suitable fillers to optimize their clinical performance has been given priority in addressing those shortcomings. In this study, silica‐based nanoclusters were synthesized and used as fillers to prepare UV curable dental composites was assessed. Nanoclusters were prepared by prepolymerization followed by pulverization and sieving of commercial silica nanoparticles with triethylene glycol dimethacrylate monomer. The composites were then made by filling 55:25:20 weight ratio of urethane dimethacrylate, bisphenol A glycidyl methacrylate, and triethylene glycol dimethacrylate, respectively with varying concentration of nanoclusters. The clusters and composites were characterized by SEM, TGA, and FTIR analyzes. The results have shown a significant improvement of physical and mechanical properties in composites containing nanoclusters. Increasing nanocluster concentration caused a reduction in composite polymerization shrinkage, water absorption and solubility as well as limited rise of flexural strength. At 50% filler load, nanoclusters doped composites exhibited higher flexural strength than nanoparticles doped composites. Furthermore, the blending of nanoclusters with nanoparticles as fillers produced the composites having the lowest polymerization shrinkage (2.2%) and the highest flexural strength (113.91 MPa). Overall, the synthesized nanoclusters have shown greater performance in comparison with the current available silica nanoparticles.
- 27 July 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (10) , 7564-7574
Preparation and characterization of silica based nanoclusters as reinforcement for dental applications
As composite resins become the most extensively utilized material in the field of cosmetic and restorative dentistry, several strategies to overcome dental composites' challenges such as long‐term mechanical failure and secondary caries are continuously being developed. Among them, the design of suitable fillers to optimize their clinical performance has been given priority in addressing those shortcomings. In this study, silica‐based nanoclusters were synthesized and used as fillers to prepare UV curable dental composites was assessed. Nanoclusters were prepared by prepolymerization followed by pulverization and sieving of commercial silica nanoparticles with triethylene glycol dimethacrylate monomer. The composites were then made by filling 55:25:20 weight ratio of urethane dimethacrylate, bisphenol A glycidyl methacrylate, and triethylene glycol dimethacrylate, respectively with varying concentration of nanoclusters. The clusters and composites were characterized by SEM, TGA, and FTIR analyzes. The results have shown a significant improvement of physical and mechanical properties in composites containing nanoclusters. Increasing nanocluster concentration caused a reduction in composite polymerization shrinkage, water absorption and solubility as well as limited rise of flexural strength. At 50% filler load, nanoclusters doped composites exhibited higher flexural strength than nanoparticles doped composites. Furthermore, the blending of nanoclusters with nanoparticles as fillers produced the composites having the lowest polymerization shrinkage (2.2%) and the highest flexural strength (113.91 MPa). Overall, the synthesized nanoclusters have shown greater performance in comparison with the current available silica nanoparticles.
- 6 July 2021
- Published by Springer Nature in Chemical Papers
- Vol. 75 (11) , 5839-5848
Low-temperature synthesis of boron carbide nanofibers via electrospinning to reinforce composites
- 6 July 2021
- Published by Springer Nature in Chemical Papers
- Vol. 75 (11) , 5839-5848
Low-temperature synthesis of boron carbide nanofibers via electrospinning to reinforce composites
- 1 April 2020
- Published by Adnan Menderes University in Meandros Medical and Dental Journal
- Vol. 21 (1) , 26-33
Effect of Silver Ion Surface Coating on Antimicrobial and Cutting Efficiencies of Nickel-titanium Rotary Files
- 1 April 2020
- Published by Adnan Menderes University in Meandros Medical and Dental Journal
- Vol. 21 (1) , 26-33
Effect of Silver Ion Surface Coating on Antimicrobial and Cutting Efficiencies of Nickel-titanium Rotary Files
- 7 July 2011
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 59 (2) , 381-386
Preparation of Sn doped nanometric TiO2 powders by reflux and hydrothermal syntheses and their characterization
- 7 July 2011
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 59 (2) , 381-386
Preparation of Sn doped nanometric TiO2 powders by reflux and hydrothermal syntheses and their characterization
- 29 July 2010
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 56 (3) , 227-235
Antibacterial glass films prepared on metal surfaces by sol–gel method
- 29 July 2010
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 56 (3) , 227-235
Antibacterial glass films prepared on metal surfaces by sol–gel method