QWQingfeng Wang

Qingfeng Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qingfeng Wang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Visual Sensor Target Tracking and Localization Method for Automatic Excavators

    by Guangxu Liu, Qingfeng Wang, Tao Wang, Bingcheng Li, Xiangshuo Xi

    The efficacy of visual measurement-based control systems for excavator trajectory operations hinges on the reliability and accuracy of visual sensors, dictated by the identification of target feature points. This encompasses two pivotal aspects: the continuous and accurate tracking of markers, essential for the visual sensor system’s reliability, and the precise localization of marker feature points, critical for determining the excavator’s operational pose. Addressing the shortcomings of current methodologies, we introduce an adaptive Region of Interest (ROI) method, employing a predictor that combines marker motion and size change information to forecast the marker’s future location and size, thereby minimizing background noise and ensuring continuous marker tracking. A corrector subsequently refines the ROI, leveraging marker characteristics to preserve marker integrity and optimize ROI determination. Our experiments in various complex operational environments demonstrate the superiority of the adaptive ROI method over conventional and deep learning approaches in enabling the maintenance of continuous and precise marker tracking. This ensures the reliability of visual measurements without reliance on extensive datasets and high computational power. Furthermore, to mitigate feature point localization noise, we propose a variable-quality color target localization method that allocates varying qualities to pixels based on their Hue component, markedly diminishing noise in comparison to traditional constant-quality methods. This thorough study establishes a foundation for the visual measurement of automatic excavator pose and the closed-loop control of operation trajectories through visual measurement. Additionally, it serves as a reference for target tracking and localization in similar application scenarios.


  • Analysis of Novel 5G Wireless Communication Coverage Enhancing Service Mode with Power Towers and Street Lamp Poles Integrated

    by Jianzhong Wang, Zhenhua Jiao, Qingfeng Wang, Yiqi Zhu, Kai Li

    In the process of rapid deployment of 5G base stations (BSs), some prominent problems have been encountered: first, with the increase of signal frequency, the coverage area of existing BS poles and towers are insufficient; second, it is usually difficult to locate new BS poles and towers, and the investment for new BS poles and towers are huge. Public power facilities such as power towers and street lamps distributed in urban road systems at all levels, can provide a more flexible scheme for the location of 5G wireless communication BSs. Using the infrastructure of public power distribution system as tower resources can not only effectively solve the coverage problem of 5G wireless communication, but also revitalize the existing resources for power grid enterprises and improve the economic benefits to a great extent. In this paper, a novel 5G wireless communication coverage enhancing service mode with power towers and street lamp poles integrated has been proposed, which is based on the power supply companies in Zhejiang Province of the State Grid. By investigating the ownership and opening-up capacity of power towers and street lamp poles, the operation conditions, products and service mode has been studied, and relevant conclusions has been given.


  • Open Access

    Moedling and Control Strategy of a Multi-Pump Multi-Actuator Hydraulic System With On/Off Valve Matrix

    by Ruikai Bao, Qingfeng Wang, Tao Wang

    A single-pump multi-actuator hydraulic system has an amount of coupling loss because the output pressure of the pump adapts the actuator with the highest load and the other actuators with lower loads have to consume the pressure difference in throttling valves. In this paper, a multi-pump multi-actuator system with on/off valve matrix is developed to reduce the coupling throttling loss. The total flow rate of all pumps matches the requirement of all actuators so as to avoid unnecessary increase of installation power. With the help of the on/off valve matrix, on the one hand, the multiple actuators can be decoupled into several single-pump single actuator systems separately in low flow demand. On the other hand, the multiple pumps can interflow to satisfy large flow demand. A two-level control strategy is proposed to achieve energy saving and good precision tracking simultaneously. The first level is to control the on/off switches and actuator modes based on the optimal energy consumption. The second level is to control the pumps and the throttling valves aiming at desired tracking precision. In addition, a compensation strategy is proposed to reduce the flow shock in on/off switches by transiting the control signals smoothly. Finally, the effectiveness of the proposed hydraulic system and control strategy are verified by experimental results


  • Open Access

    Energy-Saving Trajectory Tracking Control of a Multi-Pump Multi-Actuator Hydraulic System

    by Ruikai Bao, Qingfeng Wang, Tao Wang

    With the increasing application of automated hydraulic excavators, the demand for high-level control performance and significant energy saving schemes becomes stronger. The traditional hydraulic excavators with single-pump power source have amounts of coupling loss on throttling valves due to multi-actuator effect. Moreover, their operability is usually influenced by the load varying in a large range. This paper proposes a multi-pump system with on-off valve matrix to eliminate the coupling loss by dividing the system into several single-pump single-actuator subsystems. A pump/valve coordinate control strategy with multiple working modes is developed to adapt the load variation. First, mathematical modeling including mechanical part and hydraulic part is carried out based on dynamic analysis. Second, a three-level coordinated control scheme is proposed: 1) The motion tracking level utilizes backstepping control technique with load observation to obtain the desired hydraulic force; 2) The working mode switching level configures the pump and valve control mode to maximize energy saving according to load condition; 3) The force control level utilizes control technique to guarantee the stability and dynamic performance. Finally, comparative experimental results are presented to show the good control performance and significant energy saving achieved by the proposed multi-pump multi-actuator system as well as the control strategy.


  • Design and Implementation of Simulation Platform for Analog Circuits Based on SimElectronics

    by Haiying Qi, Hongyu Zhao, Qingfeng Wang

    A virtual simulation experimental platform based on Simulink/SimElectronics is designed and implemented to improve the learning effect and scientific research efficiency for students, so that simulation of various analog circuits can be completed by MATLAB, the commonly used software. The method and process of simulation experiment on the platform are shown through the example of a negative feedback amplifier. The experiment can simulate the actual situation of the circuit and the data and signal waveforms of quiescent and dynamic operation analysis can be achieved, the influence of negative feedback to the circuit performance are verified just as the theoretical analysis. The results show that the process of simulation based on this platform is the same with that of actual hardware experiments with clear, visual and accurate results. This kind of experiment also can reduce the cost and improve experiment flexibility.

  • Open Access

    Online Real-Time Estimation of Response Time for Periodic Messages in Controller Area Networks

    by Dahui Gao, Qingfeng Wang, Yong Lei, Zheng Chen, Linying Shangguan

    The Controller Area Networks (CAN) are widely used in industrial Networked Control Systems (NCSs), such as construction machineries, hybrid vehicles, robotics, and other applications. The message response time (MRT) or communication delay is the main issue to degrade the performance of CAN-based NCSs since its exact value is time-varying and unpredictable. The online acquisition of exact MRT can be quite helpful for the delay compensation of NCSs. However, since the clocks on different nodes are asynchronous, the MRT acquisition in CAN is a challenging work. The current delay acquisition methods for asynchronous systems are not suitable for the delay compensation in CAN-based NCSs because they either increase the bus load of CAN or cannot acquire the exact MRT in real time. In this paper, we propose a novel online real-time MRT estimation method for periodic CAN messages based on the analysis of message traces on CAN bus. The proposed method can estimate the exact MRT of the received message instance in real time without increasing the bus load and can be conveniently embedded into the CAN nodes without requiring additional equipment. In order to validate the proposed method, practical experiments are carried out and the experimental results show that the proposed method can effectively estimate the exact MRT of periodic CAN messages.


  • Component sizing for compound hybrid excavators

    by Qian Zhu, Qingfeng Wang, Qihuai Chen

    This paper proposes a novel component sizing method for a midsize compound hybrid excavator in which dynamic programming is used as the optimal energy management strategy. This method combines design optimization with the operating cycle and the control method. A multi-objective optimization method to minimize the fuel consumption and the component cost is also presented. In comparison with the traditional component sizing method, which considers only the power demand, this method allows an overall consideration of the fuel economy, the component cost, the power demand, the control method and the operating cycle. The design results show that the component size requirements are different for different control methods. The proposed component sizing method can deal with the trade-off between the fuel economy and the component cost while ensuring the work efficiency. Therefore, it is more applicable for the design of a compound hybrid excavator. Another contribution of the study is the development of a sizing law which can reduce the computation time of the proposed component sizing method. It uses an introduced variable, namely the number of efficient operating points of the engine, to determine the sizes of the assist motor and the ultracapacitor.


  • The control strategy for improving the stability of a powertrain for a compound hybrid power excavator

    by Hong Yao, Qingfeng Wang

    Nowadays, hybrid power excavators are an active research subject in the construction machinery area. The primary focus of this study is to investigate the control strategy for improving the stability of a powertrain for compound hybrid power excavators. First, the power flow and the dynamics of the powertrain of compound hybrid power excavators are analysed. It is concluded that the control strategy for compound hybrid power excavators has to guarantee the charge and discharge priority for operation of the swing and the boom lowering. Otherwise, large-scale switches of the operation point of the engine have to be performed in order to keep the state of charge in the appropriate range, which results in worse stability of the powertrain. Then, an improved rule-based control strategy is presented, which incorporates a load torque distributor, a charge-sustaining strategy and a dynamic torque compensator. The simulation model of a 20 ton compound hybrid power excavator, namely the ZE205E hybrid, is established. The improved rule-based control strategy, the thermostat control strategy and the control strategy presented by Yoo in 2009 are compared with respect to the stability of the powertrain and the fuel consumption through simulations. The simulation results show that the improved rule-based control strategy is best for the stability; however, for the fuel consumption, the improved rule-based control strategy is better than the thermostat control strategy but poorer than the control strategy described by Yoo. Taking into overall consideration the stability of the powertrain and the fuel consumption, the improved rule-based control strategy presented in this paper is more applicable for compound hybrid power excavators.


  • Open Access

    Development of Power Train of Hybrid Power Excavator

    by Hong Yao, Qingfeng Wang

    In this paper, a 20-ton prototype compound hybrid excavator is presented which includes assisting electric motor, swing electric motor, a super capacitor pack, an engine and negative flow hydraulic system. The energy-saving principle of hybrid excavator is introduced as well. The development rules of power train which include parameter design rules of key components and hierarchical structure of control strategy of hybrid power system are presented. By developing the electric swing control strategy and power management algorithm, experiments show that the developed hybrid power system can significantly improve the fuel economy of the excavator.