Ak Pandey
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ak Pandey has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Saurabh Singh Gautam
Defence Materials and Stores Research and Development Establishment , Defence Research & Development Organization, D.M.S.R.D.E. P.O. , Kanpur , Uttar Pradesh , India
2 shared publicationsVishal Das
Defence Materials and Stores Research and Development Establishment, Defence Research and Development Organisation (DRDO), Kanpur, India
2 shared publicationsA. K. Pandey
Defence Materials and Stores Research and Development Establishment , Defence Research & Development Organization, D.M.S.R.D.E. P.O. , Kanpur , Uttar Pradesh , India
1 shared publicationAbhishek Singh
Defence Materials and Stores Research and Development Establishment , Defence Research & Development Organization, D.M.S.R.D.E. P.O. , Kanpur , Uttar Pradesh , India
1 shared publicationArvind Kumar Pandey
Polymer Processing Lab, Defence Materials and Stores Research and Development Establishment, Defence Research & Development Organization , Kanpur, Uttar Pradesh, India
1 shared publicationDn Tripathi
Defence Materials and Stores Research and Development Establishment, Defence Research and Development Organisation (DRDO), Kanpur, India
1 shared publication
Latest Publications
- 31 May 2021
- Published by SAGE Publications in Progress in Rubber, Plastics and Recycling Technology
- Vol. 37 (4) , 354-377
Melt elasticity and flow properties of polypropylene impact copolymer/polyolefin elastomer blends subjected to varied capillary extrusion conditions
In present study, rheological properties of polypropylene impact copolymer (PPcp) and polyolefin elastomer (POE) blend melts were evaluated on a capillary rheometer under shear and elongational flows. The flow and melt elastic properties (die swell and first normal stress difference) studied at varied extrusion conditions were correlated with blend morphology and elastomer content by means of image analysis and theoretical models. Dispersed particle break-up and coalescence were observed to be influenced by POE content and the viscosities of the constituent polymers which were in turn affected by the capillary extrusion conditions (shear rate in particular). The blend melts demonstrated typical pseudoplastic behavior obeying Cross model under shear flow. The elongational flow also corroborated well with the shear flow behavior. All the blends illustrated prominent dependence of melt elastic properties on POE content and the capillary extrusion conditions. The melt elastic properties were also found to critically rely on the inter-particle distance of the POE phase.
- 31 May 2021
- Published by SAGE Publications in Progress in Rubber, Plastics and Recycling Technology
- Vol. 37 (4) , 354-377
Melt elasticity and flow properties of polypropylene impact copolymer/polyolefin elastomer blends subjected to varied capillary extrusion conditions
In present study, rheological properties of polypropylene impact copolymer (PPcp) and polyolefin elastomer (POE) blend melts were evaluated on a capillary rheometer under shear and elongational flows. The flow and melt elastic properties (die swell and first normal stress difference) studied at varied extrusion conditions were correlated with blend morphology and elastomer content by means of image analysis and theoretical models. Dispersed particle break-up and coalescence were observed to be influenced by POE content and the viscosities of the constituent polymers which were in turn affected by the capillary extrusion conditions (shear rate in particular). The blend melts demonstrated typical pseudoplastic behavior obeying Cross model under shear flow. The elongational flow also corroborated well with the shear flow behavior. All the blends illustrated prominent dependence of melt elastic properties on POE content and the capillary extrusion conditions. The melt elastic properties were also found to critically rely on the inter-particle distance of the POE phase.
- 2 September 2013
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 52 (13) , 1381-1389
Melt Elastic Properties during Capillary Extrusion of PP Impact Copolymer/Styrene-Butadiene-Styrene Block Copolymer Blends
Our previous study reported on low temperature impact enhancement of PP impact copolymer (PPcp) with the addition of styrene-butadiene-styrene (SBS). In present study rheological properties of PPcp/SBS blend melts in shear and elonagtional flows have been correlated with morphology using image analysis and theoretical models. The influence of blend morphology on steady shear and melt elastic properties (die swell, first normal stress difference, recoverable shear strain and elastic shear modulus) evaluated on capillary rheometer showed strong correlation under shear and elongational flows. The melt elastic properties were also found to critically rely on the inter-particle distance of the SBS phase.
- 2 September 2013
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 52 (13) , 1381-1389
Melt Elastic Properties during Capillary Extrusion of PP Impact Copolymer/Styrene-Butadiene-Styrene Block Copolymer Blends
Our previous study reported on low temperature impact enhancement of PP impact copolymer (PPcp) with the addition of styrene-butadiene-styrene (SBS). In present study rheological properties of PPcp/SBS blend melts in shear and elonagtional flows have been correlated with morphology using image analysis and theoretical models. The influence of blend morphology on steady shear and melt elastic properties (die swell, first normal stress difference, recoverable shear strain and elastic shear modulus) evaluated on capillary rheometer showed strong correlation under shear and elongational flows. The melt elastic properties were also found to critically rely on the inter-particle distance of the SBS phase.
- 1 March 2012
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 51 (5) , 446-454
Compatibilization Efficacy of LLDPE-g-MA on Mechanical, Thermal, Morphological and Water Absorption Properties of Nylon-6/LLDPE Blends
The effect of compatibilizer (LLDPE-g-MA) on mechanical, thermal, morphological and water absorption properties of Nylon-6/LLDPE blends was investigated. SEM analysis and image processing revealed coarse biphasic morphology with LLDPE dispersant size in the range of 1.97–2.23 µm for uncompatibilized blends wherein compatibilized blends showed smooth morphology with dispersant size in the range of 0.76–1.34 µm. Compatibilization effect has also been supplemented by thermal studies showing shift in crystalline melting point of Nylon-6 in compatibilized blends reflecting improved interfacial interaction. Compatibilized blends showed 10–25% overall improvement in mechanical properties and 15–35% reduction in water absorption as compared to uncompatibilized blends.
- 1 March 2012
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 51 (5) , 446-454
Compatibilization Efficacy of LLDPE-g-MA on Mechanical, Thermal, Morphological and Water Absorption Properties of Nylon-6/LLDPE Blends
The effect of compatibilizer (LLDPE-g-MA) on mechanical, thermal, morphological and water absorption properties of Nylon-6/LLDPE blends was investigated. SEM analysis and image processing revealed coarse biphasic morphology with LLDPE dispersant size in the range of 1.97–2.23 µm for uncompatibilized blends wherein compatibilized blends showed smooth morphology with dispersant size in the range of 0.76–1.34 µm. Compatibilization effect has also been supplemented by thermal studies showing shift in crystalline melting point of Nylon-6 in compatibilized blends reflecting improved interfacial interaction. Compatibilized blends showed 10–25% overall improvement in mechanical properties and 15–35% reduction in water absorption as compared to uncompatibilized blends.
- 1 May 2011
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 50 (8) , 825-832
Effect of SBS Content on Low Temperature Impact Strength, Morphology and Rheology of PP-cp/SBS Blends
Izod impact strength of PP impact copolymer/Styrene-Butadiene-Styrene blends were evaluated at varied sub-zero temperatures and demonstrated 12 times enhancement in impact strength of 40% SBS containing blend over pure PP-cp at −40°C. SBS content played a vital role in morphology development as it changes from droplet morphology to elongated ellipsoid to a seemingly networked structure leading towards different fracture mechanisms. Rheological properties of blends evaluated on capillary rheometer showed pseudoplastic behavior at varied shear rates (50 − 104 s−1) at 220°C and good agreement between experimental shear viscosity and theoretical values as per log additivity principle at high shear rates.
- 1 May 2011
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 50 (8) , 825-832
Effect of SBS Content on Low Temperature Impact Strength, Morphology and Rheology of PP-cp/SBS Blends
Izod impact strength of PP impact copolymer/Styrene-Butadiene-Styrene blends were evaluated at varied sub-zero temperatures and demonstrated 12 times enhancement in impact strength of 40% SBS containing blend over pure PP-cp at −40°C. SBS content played a vital role in morphology development as it changes from droplet morphology to elongated ellipsoid to a seemingly networked structure leading towards different fracture mechanisms. Rheological properties of blends evaluated on capillary rheometer showed pseudoplastic behavior at varied shear rates (50 − 104 s−1) at 220°C and good agreement between experimental shear viscosity and theoretical values as per log additivity principle at high shear rates.