Jai Prakash Narayan Rai

The discharge of potentially toxic petroleum hydrocarbons into the environment has been a matter of concern, as these organic pollutants accumulate in many ecosystems due to their hydrophobicity and low bioavailability. Petroleum hydrocarbons are neurotoxic and carcinogenic organic pollutants, extremely harmful to human and environmental health. Traditional treatment methods for removing hydrocarbons from polluted areas, including various mechanical and chemical strategies, are ineffective and costly. However, many indigenous microorganisms in soil and water can utilise hydrocarbon compounds as sources of carbon and energy and hence, can be employed to degrade hydrocarbon contaminants. Therefore, bioremediation using bacteria that degrade petroleum hydrocarbons is commonly viewed as an environmentally acceptable and effective method. The efficacy of bioremediation can be boosted further by using potential biosurfactant-producing microorganisms, as biosurfactants reduce surface tension, promote emulsification and micelle formation, making hydrocarbons bio-available for microbial breakdown. Further, introducing nanoparticles can improve the solubility of hydrophobic hydrocarbons as well as microbial synthesis of biosurfactants, hence establishing a favourable environment for microbial breakdown of these chemicals. The review provides insights into the role of microbes in the bioremediation of soils contaminated with petroleum hydrocarbons and emphasises the significance of biosurfactants and potential biosurfactant-producing bacteria. The review partly focusses on how nanotechnology is being employed in different critical bioremediation processes.

The competence of novel fungal consortium, consisting of Nigrospora sp. LDF00204 (accession no. KP732542) and Curvularia lunata LDF21 (accession no. KU664593), was investigated for the treatment of pulp and paper mill effluent. Fungal consortium exhibited enhanced biomass production under optimized medium conditions, i.e., glucose as carbon (C), sodium nitrate as nitrogen (N), C/N 1.5:0.5, pH 5, temperature 30 °C, and agitation 140 rpm, and significantly reduced biochemical oxygen demand (85.6%), chemical oxygen demand (80%), color (82.3%), and lignin concentration (76.1%) under catalytic enzyme activity; however, unutilized ligninolytic enzymes, such as laccase (Lac), manganese peroxidase (MnP), and lignin peroxidase (LiP), were observed to be 13.5, 11.4, and 9.4 U/ml after the third cycle of effluent treatment in repeated batch process. Scanning electron microscopy (SEM) of fungal consortium revealed their compatibility through intermingled hyphae and spores, while the FTIR spectra confirmed the alteration of functional groups ensuring structural changes during the effluent treatment. Gas chromatography/mass spectroscopy (GC-MS) analysis showed the reduction of complex compounds and development of numerous low-molecular-weight metabolites, such as 1-3-dimethyl benzene, 2-chloro-3-methyl butane, pentadecanoic acid, and 1-2-benzene dicarboxylic acid, during the treatment, demonstrating the massive potential of the novel fungal consortium to degrade recalcitrant industrial pollutants.

Present investigation deals with the optimization of biodegradation process of black liquor (BL) performed by novel bacterial consortium which consist of two indigenous bacterial strains viz., Bacillus megaterium ETLB-1 and Pseudomonas plecoglossicida ETLB-3. During the process, dextrose as carbon; sodium nitrate as nitrogen; C:N ratio (2.5:1); temperature (35°C); pH (8.0); and agitation rate (160 rpm) were observed as optimum conditions for bacterial consortium. Further, these conditions were assessed for the performance of immobilized consortium that exhibit conspicuous reduction in color (96.1%), lignin (91.5%), biological oxygen demand (96.7%), and chemical oxygen demand (86.4%) of black liquor. A maximum percent reduction of 90.7% in chlorophenols (up to 10.03 mg/L) with highest release of chloride ions i.e. 1,233 mg/L was recorded under optimum conditions. Bioligninolytic activities with the presence of lignin peroxidase (LiP), manganese peroxidase (MnP), and laccase (LAC) was observed as 6.94 U/ml, 9.35, and 8.96 U/ml at different time intervals viz. 120, 144, and 96 h, respectively, during the biodegradation study. Further, gas chromatography/mass spectroscopy revealed presence of certain organic acids, degradation of majority of the toxic compounds, and generation of certain high-value compounds.

The equilibrium sorption of Cr(VI) and Cu(II) from aqueous solution using Jatropha curcas deoiled cake, has been studied with respect to adsorbent dosage, contact time, pH, and initial metal concentration in batch mode experiments. Removal of Cu(II) by deoiled cake was greater than that of Cr(VI). The adsorbent chemical characteristics, studied by Fourier transform–infrared analysis, suggested that the presence of Cr(VI) and Cu(II) in the biomass influenced the bands corresponding to hydroxyl and carboxyl groups. Desorption studies revealed that maximum metals recovery was achieved by HNO₃ followed by CH₃COOH and HCl. The Freundlich isotherm model showed good fit to the equilibrium adsorption data. The adsorption kinetics followed the pseudo‐second‐order model, which provided the best correlation for the biosorption process, and suggested that J. curcas deoiled cake can be used as an efficient biosorbent over other commonly used sorbents for decontamination of Cr(VI)‐ and Cu(II)‐containing wastewater.

The present paper evaluates the temporal and spatial impact of heavy metal containing (Cr, Zn, Cu, Ni, Cd and Fe) effluents of brass, electroplating and tannery industries on chemical and microbiological characteristics of affected soil and groundwater. Therefore, samples were drawn from three sites, S₁, S₂ and S₃, with a longitudinally distant from effluent drain of 20, 200 and 700 m, respectively. In general, the metals concentration exceeded the standard limits not only in the discharged effluents but also in the soil and groundwater. The significant reduction of microbial biomass C and N, soil respiration and microbial coefficient with increasing metal content from S₃ to S₁ was recorded, the effect being more pronounced in summer. However, the C_mic/N_mic ratio decreased whilst the metabolic quotient ($q_{{\rm CO}_{{\rm 2}} } $ ) increased with increasing metal concentration in soil. The content of Zn (11.5 mg/L) and Bacillus sp. was at maximum in groundwater of brass and electroplating industry site, whereas that of tannery site contained maximum Cr (2.34 mg/L) and Enterobacter sp. The toxic metals adversely polluted the groundwater which made it to harbours Escherichia coli beyond the prescribed limit. To check the soil and groundwater pollution, eco‐friendly measures involving improved effluent treatment technology and site‐specific application of treated effluent are recommended.