ASAlexander Schlüter

Alexander Schlüter

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alexander Schlüter has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental and simulation-based characterization of the elastic material behavior of powder metallurgically produced AlSi10Mg foams

    by Alexander Schlüter, Sven Harbusch, Jannes Mevert, Adrian Triebe, Eberhard Kerscher, Florian Patrick Schäfke, Christian Klose, Hans Jürgen Maier, Bastian Blinn, Tilmann Beck, et al.

    This study investigates the elastic behavior of AlSi10Mg foams fabricated via powder metallurgical methods using TiH $$_{\varvec{2}}$$ as a foaming agent. Nanoindentation-based characterization of the foam wall material was combined with mechanical compression testing and simulation-based numerical homogenization to determine both microscopic and macroscopic Young’s moduli. The compression tests focus on determining the purely elastic material response, avoiding even localized plastic deformation. High-resolution X-ray microscopy (XRM) data of three representative specimens were used to generate finite element meshes for computing directional stiffness properties. The simulations reveal moderate elastic anisotropy, with the lowest Young’s moduli generally occurring along the direction of reduced specimen thickness. The experimentally measured stiffness quantitatively aligns well with numerical predictions, but yielded more anisotropy than predicted.


  • A Lattice Boltzmann Method for Elastic Solids Under Plane Strain Deformation

    by Alexander Schlüter, Henning Müller, Sikang Yan, Ralf Müller


  • Open Access

    Dimension reduction, exact recovery, and error estimates for sparse reconstruction in phase space

    by Martin Holler, Alexander Schlüter, Benedikt Wirth

    An important theme in modern inverse problems is the reconstruction of time-dependent data from only finitely many measurements. To obtain satisfactory reconstruction results in this setting it is essential to strongly exploit temporal consistency between the different measurement times. The strongest consistency can be achieved by reconstructing data directly in phase space, the space of positions and velocities. However, this space is usually too high-dimensional for feasible computations. We introduce a novel dimension reduction technique, based on projections of phase space onto lower-dimensional subspaces, which provably circumvents this curse of dimensionality: Indeed, in the exemplary framework of superresolution we prove that known exact reconstruction results stay true after dimension reduction, and we additionally prove new error estimates of reconstructions from noisy data in optimal transport metrics which are of the same quality as one would obtain in the non-dimension-reduced case.

  • Open Access

    Dirichlet and Neumann boundary conditions in a lattice Boltzmann method for elastodynamics

    by Erik Faust, Alexander Schlüter, Henning Müller, Felix Steinmetz, Ralf Müller

    Recently, Murthy et al. (Commun Comput Phys 2:23, 2017. http://dx.doi.org/10.4208/cicp.OA-2016-0259 ) and Escande et al. (Lattice Boltzmann method for wave propagation in elastic solids with a regular lattice: theoretical analysis and validation, 2020. arXiv.doi:1048550/ARXIV.2009.06404. arXiv:2009.06404) adopted the Lattice Boltzmann Method (LBM) to model the linear elastodynamic behaviour of isotropic solids. The LBM is attractive as an elastodynamic solver because it can be parallelised readily and lends itself to finely discretised simulations of dynamic effects in continua, allowing transient phenomena such as wave propagation to be modeled efficiently. This work proposes simple local boundary rules which approximate the behaviour of Dirichlet and Neumann boundary conditions with an LBM for elastic solids. The boundary rules are shown to be consistent with the target boundary values in the first order. An empirical convergence study is performed for the transient tension loading of a rectangular plate, with a Finite Element (FE) simulation being used as a reference. Additionally, we compare results produced by the LBM for the sudden loading of a stationary crack with an analytical solution from Freund (Dynamic fracture mechanics. Cambridge Monographs on Mechanics. Cambridge University Press, Cambridge, 1990. https://doi.org/10.1017/CBO9780511546761).


  • Open Access

    A Lattice Boltzmann Method for Elastic Solids Under Plane Strain Deformation

    by Alexander Schlüter, Henning Müller, Sikang Yan, Erik Faust, Ralf Müller

    The Lattice Boltzmann Method (LBM), e.g. in [ 1] and [2 ], can be interpreted as an alternative method for the numerical solution of partial differential equations. Consequently, although the LBM is usually applied to solve fluid flows, the above interpretation of the LBM as a general numerical tool, allows the LBM to be extended to solid mechanics as well. In this spirit, the LBM has been studied in recent years. First publications [3], [4] presented an LBM scheme for the numerical solution of the dynamic behavior of a linear elastic solid under simplified deformation assumptions. For so-called anti-plane shear deformation, the only non-zero displacement component is governed by a two-dimensional wave equation. In this work, an existing LBM for the two-dimensional wave equation is extended to more general plane strain problems. The proposed algorithm reduces the plane strain problem to the solution of two separate wave equations for the volume dilatation and the non-zero component of the rotation vector, respectively. A particular focus is on the implementation of types of boundary conditions that are commonly encountered in engineering practice for solids: Dirichlet and Neumann boundary conditions. Last, several numerical experiments are conducted that highlight the performance of the new LBM in comparison to the Finite Element Method.

  • Open Access

    Dynamic propagation of mode III cracks in a Lattice Boltzmann method for solids

    by Henning Müller, Ali Touil, Alexander Schlüter, Ralf Müller

    This work presents concepts and algorithms for the simulation of dynamic fractures with a Lattice Boltzmann method (LBM) for linear elastic solids. This LBM has been presented previously and solves the wave equation, which is interpreted as the governing equation for antiplane shear deformation. Besides the steady growth of a crack at a prescribed crack velocity, a fracture criterion based on stress intensity factors has been implemented. This is the first time that crack propagation with a mechanically relevant criterion is regarded in the context of LBMs. Numerical results are examined to validate the proposed method. The concepts of crack propagation introduced here are not limited to mode III cracks or the simplified deformation assumption of antiplane shear. By introducing a rather simple processing step into the existing LBM at the level of individual lattice sites, the overall performance of the LBM is maintained. Our findings underline the validity of the LBM as a numerical tool to simulate solids in general as well as dynamic fractures in particular.


  • Open Access

    Dynamic Propagation of Mode III Cracks in a Lattice Boltzmann Method for Solids

    by Henning Müller, Ali Touil, Alexander Schlüter, Ralf Müller

    This work presents concepts and algorithms for the simulation of dynamic fractures with a Lattice Boltzmann method (LBM) for linear elastic solids. This LBM has been presented previously and solves the wave equation, which is interpreted as the governing equation for antiplane shear deformation. Besides the steady growth of a crack at a prescribed crack velocity, a fracture criterion based on stress intensity factors (SIF) has been implemented. This is the first time, that crack propagation with a mechanically relevant criterion is regarded in the context of LBMs. Numerical results are examined to validate the proposed method. The concepts of crack propagation introduced here are not limited to mode III cracks or the simplified deformation assumption of antiplane shear. By introducing a rather simple processing step into the existing LBM at the level of individual lattice sites, the overall performance of the LBM is maintained. Our findings underline the validity of the LBM as a numerical tool to simulate solids in general as well as dynamic fractures in particular.

  • Open Access

    A Lattice Boltzmann Method for nonlinear solid mechanics in the reference configuration

    by Erik Faust, Alexander Schlüter, Henning Müller, Ralf Müller

    With a sufficiently fine discretisation, the Lattice Boltzmann Method (LBM) mimics a second order Crank-Nicolson scheme for certain types of balance laws (Farag et al. [2021]). This allows the explicit, highly parallelisable LBM to efficiently solve the fundamental equations of solid mechanics: the conservation of mass, the balance of linear momentum, and constitutive relations. To date, all LBM algorithms for solid simulation - see e.g. Murthy et al. [2017], Escande et al. [2020], Schl\"uter et al. [2021] - have been limited to the small strain case. Furthermore, the typical interpretation of the LBM in the current (Eulerian) configuration is not easily extensible to large strains, as large topological changes complicate the treatment of boundary conditions. In this publication, we propose a large deformation Lattice Boltzmann Method for geometrically and constitutively nonlinear solid mechanics. To facilitate versatile boundary modelling, the algorithm is defined in the reference (Lagrangian) configuration.