Hongshui Zhu
Research Subjects
Research Interests
Hongshui Zhu has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Dongfang Li
School of Stomatology, Nanchang University, Nanchang 330006, China; The Key Laboratory of Oral Biomedicine, Jiangxi Province, Nanchang 330006, China
1 shared publication- Huilin Yan
Key Laboratory of Reproductive Physiology and Pathology in Jiangxi Province, Jiangxi Medical College of Nanchang University, Nanchang, P.R. China
1 shared publication Jia Liu
College of Chemistry, Nanchang University, Nanchang 330031, China
1 shared publication- Jia Zhu
Department of Laboratory Medicine and Pathology, University of Washington School of Medicine, Seattle, USA
1 shared publication - Jian Yang
School of Management, Anhui University, Hefei 230039, China
1 shared publication Jing Guo
Dept. of General, Affiliated Stomatological Hospital of Nanchang University, Nanchang 330006, China
1 shared publication
Latest Publications
- Open Access
- 22 April 2022
- Published by Wiley in Disease Markers
- Vol. 2022, 1-12
Involvement of RUVBL1 in WNT/β-Catenin Signaling in Oral Squamous Cell Carcinoma
Oral squamous cell carcinoma (OSCC) is the most common malignant tumor of head and neck squamous cell carcinoma (HNSCC), but the causes and molecular mechanisms remain unclear. The wingless-integrated/β-catenin (WNT/β-catenin) signaling pathway plays a vital role in cancer cell proliferation, differentiation, and metastasis, including OSCC. To screen potential β-catenin-associated genes involved in OSCC, the intersection of these genes in the STRING and IMEx databases was assessed using differential expression genes (DEG) from public microarrays, and 22 were further selected to construct a β-catenin-protein interaction network. The top 14 hub genes (node ) within the network were selected. Pearson’s correlation analysis showed that β-catenin expression correlated positively with the expression of 11 genes, including AR, BIRC5, CDK6, DKK1, GSK3B, MET, MITF, PARD3, RUVBL1, SLC9A3R1, and SMAD7. A heat map of overall hub gene survival was created, and elevated expression of DKK1 and RUVBL1 was associated with poor survival using the Mantel-Cox test. To identify the function of RUVBL1, colony formation assay, transwell assay, and western blotting revealed that knock-down of RUVBL1 by siRNA decreased H157 and Cal-27 cell proliferation and metastasis by inhibiting β-catenin signaling. These findings suggest that RUVBL1 may serve as a diagnostic and prognostic biomarker for OSCC, as well as a therapeutic target, and may help to uncover additional molecular mechanisms of β-catenin-driven OSCC tumorigenesis.
- 22 April 2022
- Published by Wiley in Disease Markers
- Vol. 2022, 1-12
Open AccessInvolvement of RUVBL1 in WNT/β-Catenin Signaling in Oral Squamous Cell Carcinoma
Oral squamous cell carcinoma (OSCC) is the most common malignant tumor of head and neck squamous cell carcinoma (HNSCC), but the causes and molecular mechanisms remain unclear. The wingless-integrated/β-catenin (WNT/β-catenin) signaling pathway plays a vital role in cancer cell proliferation, differentiation, and metastasis, including OSCC. To screen potential β-catenin-associated genes involved in OSCC, the intersection of these genes in the STRING and IMEx databases was assessed using differential expression genes (DEG) from public microarrays, and 22 were further selected to construct a β-catenin-protein interaction network. The top 14 hub genes (node ) within the network were selected. Pearson’s correlation analysis showed that β-catenin expression correlated positively with the expression of 11 genes, including AR, BIRC5, CDK6, DKK1, GSK3B, MET, MITF, PARD3, RUVBL1, SLC9A3R1, and SMAD7. A heat map of overall hub gene survival was created, and elevated expression of DKK1 and RUVBL1 was associated with poor survival using the Mantel-Cox test. To identify the function of RUVBL1, colony formation assay, transwell assay, and western blotting revealed that knock-down of RUVBL1 by siRNA decreased H157 and Cal-27 cell proliferation and metastasis by inhibiting β-catenin signaling. These findings suggest that RUVBL1 may serve as a diagnostic and prognostic biomarker for OSCC, as well as a therapeutic target, and may help to uncover additional molecular mechanisms of β-catenin-driven OSCC tumorigenesis.
- 15 June 2021
- Published by SAGE Publications in Stem Cells and Development
- Vol. 30 (12) , 641-650
Chlorogenic Acid Promotes Osteogenic Differentiation of Human Dental Pulp Stem Cells Through Wnt Signaling
Periodontal disease (PD) is one of the main causes of periodontal bone resorption and tooth loss in adults. How to repair the alveolar bone effectively has always been a challenge. This study was designed to clarify the effects and the underlying molecular mechanisms of chlorogenic acid (CGA) on osteogenic differentiation of human dental pulp stem cells (hDPSCs). In this study, we used CGA to treat hDPSCs. The osteogenic experiment showed that CGA can promote hDPSCs osteogenic differentiation. RNA-Seq and quantitative real-time polymerase chain reaction showed that CGA treatment enhanced the expression of the osteogenesis genes for frizzled-related protein (FRZB) and pyruvate dehydrogenase kinase 4 (PDK4) and inhibit the expression of the osteoclastogenesis genes such as those for asporin (ASPN) and cytokine-like 1 (CYTL1). Western blot analysis showed that besides FRZB, CGA treatment also caused reduction of both active and total β-catenin, while increased the total calcium/calmodulin-dependent kinase II (CamKII), the phosphorylated CamKII (pCamKII) and the phosphorylated cAMP-response element-binding protein (pCREB). Likely, the increased osteogenesis was associated with reduced canonical Wnt/β-catenin signaling but increased noncanonical Wnt/Ca2+ signaling. The results suggested that CGA can promote the osteogenic differentiation of hDPSCs by regulating Wnt signaling. These findings will serve as a foundation for further studies on how to repair defective alveolar bone for the patients with PD.
- 15 June 2021
- Published by SAGE Publications in Stem Cells and Development
- Vol. 30 (12) , 641-650
Chlorogenic Acid Promotes Osteogenic Differentiation of Human Dental Pulp Stem Cells Through Wnt Signaling
Periodontal disease (PD) is one of the main causes of periodontal bone resorption and tooth loss in adults. How to repair the alveolar bone effectively has always been a challenge. This study was designed to clarify the effects and the underlying molecular mechanisms of chlorogenic acid (CGA) on osteogenic differentiation of human dental pulp stem cells (hDPSCs). In this study, we used CGA to treat hDPSCs. The osteogenic experiment showed that CGA can promote hDPSCs osteogenic differentiation. RNA-Seq and quantitative real-time polymerase chain reaction showed that CGA treatment enhanced the expression of the osteogenesis genes for frizzled-related protein (FRZB) and pyruvate dehydrogenase kinase 4 (PDK4) and inhibit the expression of the osteoclastogenesis genes such as those for asporin (ASPN) and cytokine-like 1 (CYTL1). Western blot analysis showed that besides FRZB, CGA treatment also caused reduction of both active and total β-catenin, while increased the total calcium/calmodulin-dependent kinase II (CamKII), the phosphorylated CamKII (pCamKII) and the phosphorylated cAMP-response element-binding protein (pCREB). Likely, the increased osteogenesis was associated with reduced canonical Wnt/β-catenin signaling but increased noncanonical Wnt/Ca2+ signaling. The results suggested that CGA can promote the osteogenic differentiation of hDPSCs by regulating Wnt signaling. These findings will serve as a foundation for further studies on how to repair defective alveolar bone for the patients with PD.
- 1 July 2020
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 112, 110887
Surface modification of carbon nanotube with gelatin via mussel inspired method
- 1 July 2020
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 112, 110887
Surface modification of carbon nanotube with gelatin via mussel inspired method
- 1 October 2018
- Vol. 36 (5) , 539-543
[Effect of different sandblasting conditions on the metal-ceramic bonding strength of Co-Cr alloy fabricated by selective laser melting technology].
To investigate the effect of different sandblasting conditions on the metal-ceramic bonding strength of Co-Cr alloy fabricated by selective laser melting (SLM) technology. A total of 63 specimens of Co-Cr alloy fabricated by SLM were prepared and randomly divided into nine groups (n=7). Each group was treated with different powder particles (A1=50 µm, A2=100 µm, and A3=150 µm) and pressures (B1=0.2 MPa, B2=0.4 MPa, and B3=0.6 MPa) in sandblasting. One sample was randomly selected from each group for microstructure observation by scanning electron microscope (SEM). Ceramic was fired at the center of the specimens. Metal-ceramic bonding strength was measured with universal testing machine. Results were statistically analyzed with SPSS 17.0 software. The mean bond strengths were as follows: Group A1B1: 27.22 MPa±0.95 MPa, Group A1B2: 27.58 MPa±0.47 MPa, Group A1B3: 26.80 MPa±0.71 MPa, Group A2B1: 27.54 MPa±0.78 MPa, Group A2B2: 30.75 MPa±0.43 MPa, Group A2B3: 26.93 MPa±0.88 MPa, Group A3B1: 28.18 MPa±0.93 MPa, Group A3B2: 29.55 MPa±0.57 MPa, and Group A3B3: 28.11 MPa±0.91 MPa. The particle factor of Al₂O₃ and the pressure factor of blasting showed statistical significance (P<0.05). An interaction was observed between the factors of particle and pressure (P<0.05). Mixed fracture mode of all specimens was observed after the shear strength test. In conclusion, metal-ceramic bonding strength reaches the maximum when specimens are sandblasted with 100 µm alumina oxide at 0.4 MPa pressure.
- 1 October 2018
- Vol. 36 (5) , 539-543
[Effect of different sandblasting conditions on the metal-ceramic bonding strength of Co-Cr alloy fabricated by selective laser melting technology].
To investigate the effect of different sandblasting conditions on the metal-ceramic bonding strength of Co-Cr alloy fabricated by selective laser melting (SLM) technology. A total of 63 specimens of Co-Cr alloy fabricated by SLM were prepared and randomly divided into nine groups (n=7). Each group was treated with different powder particles (A1=50 µm, A2=100 µm, and A3=150 µm) and pressures (B1=0.2 MPa, B2=0.4 MPa, and B3=0.6 MPa) in sandblasting. One sample was randomly selected from each group for microstructure observation by scanning electron microscope (SEM). Ceramic was fired at the center of the specimens. Metal-ceramic bonding strength was measured with universal testing machine. Results were statistically analyzed with SPSS 17.0 software. The mean bond strengths were as follows: Group A1B1: 27.22 MPa±0.95 MPa, Group A1B2: 27.58 MPa±0.47 MPa, Group A1B3: 26.80 MPa±0.71 MPa, Group A2B1: 27.54 MPa±0.78 MPa, Group A2B2: 30.75 MPa±0.43 MPa, Group A2B3: 26.93 MPa±0.88 MPa, Group A3B1: 28.18 MPa±0.93 MPa, Group A3B2: 29.55 MPa±0.57 MPa, and Group A3B3: 28.11 MPa±0.91 MPa. The particle factor of Al₂O₃ and the pressure factor of blasting showed statistical significance (P<0.05). An interaction was observed between the factors of particle and pressure (P<0.05). Mixed fracture mode of all specimens was observed after the shear strength test. In conclusion, metal-ceramic bonding strength reaches the maximum when specimens are sandblasted with 100 µm alumina oxide at 0.4 MPa pressure.
- 20 August 2018
- Published by Springer Nature in Current Medical Science
- Vol. 38 (4) , 721-726
Impact of Dentinal Tubule Orientation on Dentin Bond Strength
This study aimed to determine the impact of dentinal tubule orientation on dentin bond strength to provide a reference for clinical cavity preparation in resin-bonded restoration. Patients aged 13–16 years were selected, including 18 males and 21 females. Forty-eight human maxillary first premolars from orthodontic extractions were chosen to prepare the test models with the dentinal tubule orientations perpendicular and parallel to the bonding substrate. The test models in the vertical and parallel groups were divided into three groups: total-etching with 20% phosphoric acid, total-etching with 35% phosphoric acid and self-etching, with the dentinal tubule surfaces bonded with composite resin blocks in each group. After the standard test models of dentinal tubule-composite resin blocks were placed in distilled water and stored at 37°C for 24 h, shearing tests were performed using a universal material testing machine at a crosshead speed of 0.5 mm/min. The bond strength values in the vertical group were 19.33±1.59 MPa for the 20% phosphoric acid group, 21.39±2.34 MPa for the 35% phosphoric acid group, and 16.88±1.54 MPa for the self-etching group. The bond strength values in the parallel group were 24.53±1.99 MPa for the 20% phosphoric acid group, 25.16±2.88 MPa for the 35% phosphoric acid group, and 20.83±1.99 for the self-etching group. After using same total-etching adhesive, the shear bond strength of the parallel group was higher than that of the vertical group, and the difference was statistically significant (PP<0.05). It was concluded that the dentin bonding substrate which was parallel to the direction of the dentin tubule achieved an improved bond strength; the total-etching adhesives achieved higher bond strengths in dentin bond than the self-etching adhesives.
- 20 August 2018
- Published by Springer Nature in Current Medical Science
- Vol. 38 (4) , 721-726
Impact of Dentinal Tubule Orientation on Dentin Bond Strength
This study aimed to determine the impact of dentinal tubule orientation on dentin bond strength to provide a reference for clinical cavity preparation in resin-bonded restoration. Patients aged 13–16 years were selected, including 18 males and 21 females. Forty-eight human maxillary first premolars from orthodontic extractions were chosen to prepare the test models with the dentinal tubule orientations perpendicular and parallel to the bonding substrate. The test models in the vertical and parallel groups were divided into three groups: total-etching with 20% phosphoric acid, total-etching with 35% phosphoric acid and self-etching, with the dentinal tubule surfaces bonded with composite resin blocks in each group. After the standard test models of dentinal tubule-composite resin blocks were placed in distilled water and stored at 37°C for 24 h, shearing tests were performed using a universal material testing machine at a crosshead speed of 0.5 mm/min. The bond strength values in the vertical group were 19.33±1.59 MPa for the 20% phosphoric acid group, 21.39±2.34 MPa for the 35% phosphoric acid group, and 16.88±1.54 MPa for the self-etching group. The bond strength values in the parallel group were 24.53±1.99 MPa for the 20% phosphoric acid group, 25.16±2.88 MPa for the 35% phosphoric acid group, and 20.83±1.99 for the self-etching group. After using same total-etching adhesive, the shear bond strength of the parallel group was higher than that of the vertical group, and the difference was statistically significant (PP<0.05). It was concluded that the dentin bonding substrate which was parallel to the direction of the dentin tubule achieved an improved bond strength; the total-etching adhesives achieved higher bond strengths in dentin bond than the self-etching adhesives.
- 1 February 2016
- Vol. 34 (1) , 68-72
[Synthesis and characteristics of integrated bionic mandibular condylar scaffold].
OBJECTIVE This study aims to construct a chitosan (CS)-polycaprolactone (PCL)-hydroxyapatite (HA) composite biomimetic scaffold to replace condyle and to explore the tissue engineering applications of condylar. A resin mold of the mandibular condyle was prepared by using rapid prototyping techniques. A mandibular condylar integrated biomimetic scaffold model was prepared by solution casting-ice Lek. PCL and CS were mixed at a ratio of 4:1. HA at quality ratios of 40%, 50%, 60%, and 70% was added to groups a, b, c, and d, respectively. The microscopic morphology, porosity, infrared spectra, X-ray diffraction pattern, and mechanical properties of the scaffold were observed. The scaffold that includes both upper and lower parts displayed the same features (i.e., shape, yellow-white appearance, and hard texture) as the mandibular condyle. Scanning electron microscopy showed that the composite scaffold had a 3D network spatial structure, 70%-85% porosity, and 10-200 µm pore size. Infrared spectra showed that the peak intensity reduced with decreasing HA content. X-ray diffraction showed that the diffraction peak decreased with increasing HA content. Suitable tensile and compressive and flexural strength were discovered in the presence of 50% HA. The scaffold prepared by solution casting-ice Lek shows favorable comprehensive features and is expected to replace human condylar.
- 1 February 2016
- Vol. 34 (1) , 68-72
[Synthesis and characteristics of integrated bionic mandibular condylar scaffold].
OBJECTIVE This study aims to construct a chitosan (CS)-polycaprolactone (PCL)-hydroxyapatite (HA) composite biomimetic scaffold to replace condyle and to explore the tissue engineering applications of condylar. A resin mold of the mandibular condyle was prepared by using rapid prototyping techniques. A mandibular condylar integrated biomimetic scaffold model was prepared by solution casting-ice Lek. PCL and CS were mixed at a ratio of 4:1. HA at quality ratios of 40%, 50%, 60%, and 70% was added to groups a, b, c, and d, respectively. The microscopic morphology, porosity, infrared spectra, X-ray diffraction pattern, and mechanical properties of the scaffold were observed. The scaffold that includes both upper and lower parts displayed the same features (i.e., shape, yellow-white appearance, and hard texture) as the mandibular condyle. Scanning electron microscopy showed that the composite scaffold had a 3D network spatial structure, 70%-85% porosity, and 10-200 µm pore size. Infrared spectra showed that the peak intensity reduced with decreasing HA content. X-ray diffraction showed that the diffraction peak decreased with increasing HA content. Suitable tensile and compressive and flexural strength were discovered in the presence of 50% HA. The scaffold prepared by solution casting-ice Lek shows favorable comprehensive features and is expected to replace human condylar.