Haikui Zou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Haikui Zou has a total of 138 co-authors. Here are the top co-authors by number of shared publications:
- Bao-Chang Sun
State Key Laboratory of Organic‐Inorganic Composites Beijing University of Chemical Technology Beijing People's Republic of China
27 shared publications - Guang-Wen Chu
State Key Laboratory of Organic−Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, PR China
27 shared publications Jian-Feng Chen
Beijing University of Chemical Technology
15 shared publications- Yong Luo
State Key Laboratory of Organic‐Inorganic Composites Beijing University of Chemical Technology Beijing People's Republic of China
14 shared publications - Liang-Liang Zhang
Research Center of the Ministry of Education for High Gravity Engineering and Technology Beijing University of Chemical Technology Beijing People's Republic of China
11 shared publications Yong Luo
11 shared publications
Latest Publications
- 15 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20304-20316
Process Intensification of the Michael Addition Reaction in a Rotating Packed Bed: Kinetics, Parametric Study, and Substrate Adaptability
The Michael addition reaction of acrylonitrile (ACN) and dimethylamine (DMA) is the main method for the industrial synthesis of 3-(dimethylamino) propionitrile (DMAPN). However, inadequate mixing in the reaction system can easily lead to ACN self-polymerization and low reaction efficiency. In this work, a rotating packed bed (RPB) reactor with excellent mixing performance was first applied to the Michael addition reaction of ACN and DMA. First, the kinetics of the reaction was established, revealing the characteristics of the reaction. Subsequently, the effects of operating conditions on the reaction performance were investigated in the RPB reactor. Under optimized conditions, the complete conversion of ACN was achieved within 15 min in the RPB reactor, compared to 50 min required in the stirred-tank reactor (STR). Moreover, the RPB reactor demonstrated broad applicability to various Michael addition reaction substrates and delivered high yields. This study provides theoretical guidance for the industrial application of an RPB reactor in the Michael addition reaction.
- 15 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20304-20316
Process Intensification of the Michael Addition Reaction in a Rotating Packed Bed: Kinetics, Parametric Study, and Substrate Adaptability
The Michael addition reaction of acrylonitrile (ACN) and dimethylamine (DMA) is the main method for the industrial synthesis of 3-(dimethylamino) propionitrile (DMAPN). However, inadequate mixing in the reaction system can easily lead to ACN self-polymerization and low reaction efficiency. In this work, a rotating packed bed (RPB) reactor with excellent mixing performance was first applied to the Michael addition reaction of ACN and DMA. First, the kinetics of the reaction was established, revealing the characteristics of the reaction. Subsequently, the effects of operating conditions on the reaction performance were investigated in the RPB reactor. Under optimized conditions, the complete conversion of ACN was achieved within 15 min in the RPB reactor, compared to 50 min required in the stirred-tank reactor (STR). Moreover, the RPB reactor demonstrated broad applicability to various Michael addition reaction substrates and delivered high yields. This study provides theoretical guidance for the industrial application of an RPB reactor in the Michael addition reaction.
- Open Access
- 20 February 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (2) , 51
Coptisine Chloride: A Natural Isoquinoline Alkaloid as a Dual-Responsive Aggregation-Induced Emission Sensor for Heparin and Protamine
Heparin (Hep) and its clinical antidote protamine (PRO) play essential yet antagonistic roles in anticoagulant therapy, necessitating reliable analytical tools to monitor their levels and interactions. Herein, we report that coptisine chloride (COP), a natural isoquinoline alkaloid, acts as an aggregation-induced emission (AIE) sensor enabling dual-responsive fluorescence modulation toward Hep and PRO. Owing to its rigid polycyclic and intrinsically twisted molecular framework, COP displays typical AIE behavior. In a DMSO/PBS mixture (PBS fraction = 99%, v/v), COP forms strongly emissive aggregates with Hep through electrostatically driven complexation, allowing sensitive Hep detection with a limit of detection (LOD) of 0.70 μg/mL. Subsequent competitive binding of PRO to Hep disrupts the COP–Hep aggregates, giving rise to fluorescence quenching and reversible PRO sensing (LOD: 0.49 μg/mL). Theoretical calculations together with multiple characterization techniques reveal an aggregation–disaggregation mechanism governing the dual fluorescence modulation. Moreover, COP achieves accurate Hep quantification in spiked diluted human serum, affording satisfactory linearity and recoveries (LOD = 0.71 μg/mL; recoveries 98.3–101.6%). These results demonstrate that COP, a structurally simple natural AIE luminogen, serves as a sustainable, biocompatible, and accessible tool for reversible Hep and PRO analysis in complex media.
- 20 February 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (2) , 51
Open AccessCoptisine Chloride: A Natural Isoquinoline Alkaloid as a Dual-Responsive Aggregation-Induced Emission Sensor for Heparin and Protamine
Heparin (Hep) and its clinical antidote protamine (PRO) play essential yet antagonistic roles in anticoagulant therapy, necessitating reliable analytical tools to monitor their levels and interactions. Herein, we report that coptisine chloride (COP), a natural isoquinoline alkaloid, acts as an aggregation-induced emission (AIE) sensor enabling dual-responsive fluorescence modulation toward Hep and PRO. Owing to its rigid polycyclic and intrinsically twisted molecular framework, COP displays typical AIE behavior. In a DMSO/PBS mixture (PBS fraction = 99%, v/v), COP forms strongly emissive aggregates with Hep through electrostatically driven complexation, allowing sensitive Hep detection with a limit of detection (LOD) of 0.70 μg/mL. Subsequent competitive binding of PRO to Hep disrupts the COP–Hep aggregates, giving rise to fluorescence quenching and reversible PRO sensing (LOD: 0.49 μg/mL). Theoretical calculations together with multiple characterization techniques reveal an aggregation–disaggregation mechanism governing the dual fluorescence modulation. Moreover, COP achieves accurate Hep quantification in spiked diluted human serum, affording satisfactory linearity and recoveries (LOD = 0.71 μg/mL; recoveries 98.3–101.6%). These results demonstrate that COP, a structurally simple natural AIE luminogen, serves as a sustainable, biocompatible, and accessible tool for reversible Hep and PRO analysis in complex media.
- Open Access
- 1 November 2025
- Published by Wiley in Carbon and Hydrogen
- Vol. 27 (4) , 483-494
Terrace and Line‐Edge Sites Balance in Size‐Controlled Ru/Al 2 O 3 for High‐Efficient Hydrogenation of N ‐Ethylcarbazole
Ru‐based catalysts exhibit excellent activity for the hydrogenation of N ‐ethylcarbazole (NEC) that is widely used as liquid organic hydrogen carriers (LOHCs). Previous studies showed that the Ru particle size strongly affects the catalytic performance of hydrogenation. However, the size effect on the NEC hydrogenation activity remains unclear. In this work, a series of Ru/Al 2 O 3 catalysts with precisely controlled Ru particle sizes were engineered. The correlation between the Ru particle size and resulting catalytic performance, including the distribution of reaction intermediates, was systematically investigated. The turnover frequency (TOF) for NEC hydrogenation exhibited a pronounced volcanic trend with the increase of the Ru particle size from 1.73 to 5.76 nm, reaching a maximum value of 117.75 min −1 when the Ru particle size was 3.20 nm. These results indicated that the high‐efficient catalyst required a balance between high‐coordination terrace sites and low‐coordination line‐edge sites. The kinetics experiments demonstrated that the NEC followed first‐order kinetics with an activation energy of 35.74 kJ/mol. This study offers theoretical guidance for designing high‐performance hydrogenation catalysts tailored for NEC.
- 1 November 2025
- Published by Wiley in Carbon and Hydrogen
- Vol. 27 (4) , 483-494
Open AccessTerrace and Line‐Edge Sites Balance in Size‐Controlled Ru/Al 2 O 3 for High‐Efficient Hydrogenation of N ‐Ethylcarbazole
Ru‐based catalysts exhibit excellent activity for the hydrogenation of N ‐ethylcarbazole (NEC) that is widely used as liquid organic hydrogen carriers (LOHCs). Previous studies showed that the Ru particle size strongly affects the catalytic performance of hydrogenation. However, the size effect on the NEC hydrogenation activity remains unclear. In this work, a series of Ru/Al 2 O 3 catalysts with precisely controlled Ru particle sizes were engineered. The correlation between the Ru particle size and resulting catalytic performance, including the distribution of reaction intermediates, was systematically investigated. The turnover frequency (TOF) for NEC hydrogenation exhibited a pronounced volcanic trend with the increase of the Ru particle size from 1.73 to 5.76 nm, reaching a maximum value of 117.75 min −1 when the Ru particle size was 3.20 nm. These results indicated that the high‐efficient catalyst required a balance between high‐coordination terrace sites and low‐coordination line‐edge sites. The kinetics experiments demonstrated that the NEC followed first‐order kinetics with an activation energy of 35.74 kJ/mol. This study offers theoretical guidance for designing high‐performance hydrogenation catalysts tailored for NEC.
- 15 April 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (17) , 8745-8758
Synthesis of Co-Based Catalysts Using a Rotating Packed Bed for Selective Hydrogenation of Acetonitrile
- 15 April 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (17) , 8745-8758
Synthesis of Co-Based Catalysts Using a Rotating Packed Bed for Selective Hydrogenation of Acetonitrile
- 1 September 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 354
Zinc (II)-1,4,7,10-tetraazacyclododecane complexes catalyzed tertiary amine-based CO2 capture in a rotating packed bed
- 1 September 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 354
Zinc (II)-1,4,7,10-tetraazacyclododecane complexes catalyzed tertiary amine-based CO2 capture in a rotating packed bed
- 25 January 2024
- Published by Wiley in AIChE Journal
- Vol. 70 (4)
Kinetic study on the reaction between CO2 and tertiary amine catalyzed by zinc(II) aza‐macrocyclic complexes
In this work, the kinetics study on the reaction between CO2 and tertiary amine catalyzed by zinc(II)‐1,4,8,11‐tetraazacyclotetradecane complexes (CM) and zinc(II)‐1,4,7,10‐tetraazacyclododecane complexes (CN) was carried out in a stopped‐flow device. The effects of the catalyst concentration, type of tertiary amines, and temperature on the reaction rate (ν) and catalytic activity (φ) were studied. It was found that the catalyst concentration, tertiary amine with higher pKa, and temperature had positive effects on ν. ν in N‐methyl diethanolamine solution with 10.0 mol m−3 CM and CN were 16.62 and 26.05 folds than the uncatalyzed ν at 298 K, respectively. φ increased with increasing catalyst concentration, decreasing temperature and tertiary amine's pKa. In addition, the kinetics behavior of tertiary amine‐CM/CN‐CO2 systems conformed to the Michaelis–Menten model. The activation energies in catalytic systems were 4%–15% lower than that in the non‐catalytic systems.
- 25 January 2024
- Published by Wiley in AIChE Journal
- Vol. 70 (4)
Kinetic study on the reaction between CO2 and tertiary amine catalyzed by zinc(II) aza‐macrocyclic complexes
In this work, the kinetics study on the reaction between CO2 and tertiary amine catalyzed by zinc(II)‐1,4,8,11‐tetraazacyclotetradecane complexes (CM) and zinc(II)‐1,4,7,10‐tetraazacyclododecane complexes (CN) was carried out in a stopped‐flow device. The effects of the catalyst concentration, type of tertiary amines, and temperature on the reaction rate (ν) and catalytic activity (φ) were studied. It was found that the catalyst concentration, tertiary amine with higher pKa, and temperature had positive effects on ν. ν in N‐methyl diethanolamine solution with 10.0 mol m−3 CM and CN were 16.62 and 26.05 folds than the uncatalyzed ν at 298 K, respectively. φ increased with increasing catalyst concentration, decreasing temperature and tertiary amine's pKa. In addition, the kinetics behavior of tertiary amine‐CM/CN‐CO2 systems conformed to the Michaelis–Menten model. The activation energies in catalytic systems were 4%–15% lower than that in the non‐catalytic systems.
- 12 July 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (42) , 17194-17200
Process Intensification: Continuous Synthesis of Nitrosyl Sulfuric Acid in a Rotating Packed Bed Reactor
- 12 July 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (42) , 17194-17200
Process Intensification: Continuous Synthesis of Nitrosyl Sulfuric Acid in a Rotating Packed Bed Reactor
- Open Access
- 8 July 2023
- Published by Wiley
Double H-bonds multimer absorbent design for H2S absorption
A novel double H-bonds multimer absorbent for H2S absorption was designed via intermolecular self-assembly using DBU and EG under the guidance of QCC. The formation mechanisms of multimer absorbents and the absorption mechanisms between those absorbents and H2S were explored by QCC and experiments. It was found that the formed DBU-2EG multimer absorbent at the DBU/EG molar ratio of 1:2 has two intermolecular H-bonds with different strengths between DBU and EG, which can combine with H2S via weak H-bond. Furthermore, the characteristics analysis of multimer absorbents confirmed the above mechanisms. Experimental results indicated that the DBU-2EG has the highest H2S solubility of 2.64 mol/mol (DBU) with a low viscosity value of 15.12 mPa·s at 25 ℃ and desorption temperature below 60 ℃ at 100 kPa. The multimer absorbent exhibits great potential in the H2S capture process. In addition, this research provides an effective strategy for the design of absorbents.
- 8 July 2023
- Published by Wiley
Open AccessDouble H-bonds multimer absorbent design for H2S absorption
A novel double H-bonds multimer absorbent for H2S absorption was designed via intermolecular self-assembly using DBU and EG under the guidance of QCC. The formation mechanisms of multimer absorbents and the absorption mechanisms between those absorbents and H2S were explored by QCC and experiments. It was found that the formed DBU-2EG multimer absorbent at the DBU/EG molar ratio of 1:2 has two intermolecular H-bonds with different strengths between DBU and EG, which can combine with H2S via weak H-bond. Furthermore, the characteristics analysis of multimer absorbents confirmed the above mechanisms. Experimental results indicated that the DBU-2EG has the highest H2S solubility of 2.64 mol/mol (DBU) with a low viscosity value of 15.12 mPa·s at 25 ℃ and desorption temperature below 60 ℃ at 100 kPa. The multimer absorbent exhibits great potential in the H2S capture process. In addition, this research provides an effective strategy for the design of absorbents.
- 8 May 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (20) , 8063-8070
Study on the Solid–Liquid Mass-Transfer Performance of Suspension in a Rotating Packed Bed
- 8 May 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (20) , 8063-8070
Study on the Solid–Liquid Mass-Transfer Performance of Suspension in a Rotating Packed Bed