KMKi Hoon Moon

Ki Hoon Moon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ki Hoon Moon has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Prediction of Fracture Toughness of Intermediate Layer of Asphalt Pavements Using Artificial Neural Network

    by Dong-Hyuk Kim, Ha-Yeong Kim, Ki-Hoon Moon, Jin-Hoon Jeong

    For the sustainable management of pavements, predicting the condition of the pavement structure using a consistent and accurate method is necessary. The intermediate layer situated immediately below the surface layer has the greatest effect on the condition of the pavement structure. As a result, to accurately predict the condition of a pavement structure, the mechanistic properties of the intermediate layer are very important. Fracture toughness (FT)—a mechanistic property of the intermediate layer—is an important factor in predicting the distress that develops on the pavement surface. However, measuring FT consistently is practically impossible by coring asphalt pavement over the entire pavement section. Therefore, an artificial neural network (ANN) model—developed by using pavement surface conditions and traffic volume—can predict the FT of the intermediate layer of expressway asphalt pavements. Several ANN models have been developed by applying various optimizers, ANN structures, and preprocessing methods. The optimal model was selected by analyzing the predictive performance, error stability, and distribution of the developed models. The final selected model showed small stable errors, and the distributions of the predicted and measured FTs were similar. Furthermore, FT limits were set with outliers. Future asphalt pavement conditions can be predicted throughout the expressway network by using the proposed model without coring samples.


  • Open Access

    Double-Recycled Reclaimed Asphalt Pavement: A Laboratory Investigation at Low Temperatures Based on Different Mathematical Approaches

    by Ki Hoon Moon, Augusto Cannone Falchetto

    Using recyclable materials in asphalt pavement is a fundamental design approach not only for limiting the environmental impact of the construction industry, but also for reducing the overall costs of the road infrastructures. Over the past years, road agencies have developed different policies to incorporate various types of recyclable material into conventional asphalt mixtures. reclaimed asphalt pavement (RAP) is one of the most highly recycled construction materials. However, the aged RAP binder and its stiffer and brittle characteristics compared to the fresh binder may negatively affect the performance of the recycled mixture, especially when operating in cold climates. In this study, the low-temperature response of asphalt mixture prepared with single-recycled RAP (SRRAP) and double-recycled RAP (DRRAP), prepared in the laboratory, is experimentally investigated based on creep testing performed with the bending beam rheometer (BBR). Then, the data were analyzed based on three simple mathematical models to extract information on material behavior. Finally, a new indicator named thermal stress factor (TFS) on low-temperature response is proposed. Relatively poorer performance was observed from SRRAP mixture compared to the asphalt mixture prepared with virgin material. However, the low-temperature response between SRRAP and DRRAP did not present significant differences. The values of TFS support the experimental results and suggest the possibility of considering re-recycling technology for further research with the objective of a possible application in the asphalt pavement industry.


  • Simple Approach to the Investigation of Asphalt Mixture Strength on Small Beam Specimens at Low Temperature

    by Augusto Cannone Falchetto, Ki Hoon Moon

    In this research, a simplified approach based on size effect theory is used to extrapolate the strength values obtained on small asphalt mixtures specimens at low temperature with a modified bending beam rheometer (BBR). First, nine asphalt mixtures having different mix designs are prepared. Then, Weibull statistics and factorial design are used to evaluate the statistical distribution of the BBR measurements and the effect of conditioning time, loading rate, and testing temperature on material response, respectively. Finally, the BBR strength measured at three different temperatures is compared to the corresponding values obtained from two conventional test methods: direct tension (DT) and indirect tension (IDT) tests. It is observed that BBR strength values are statistically equivalent to those of IDT and DT when the size effect theory and the weakest link model are used to take into account the difference in volume, geometry, and stress field across the three testing methods.


  • Comparison of Thermal Stress Calculation: Hopkins and Hamming’s Algorithm and Laplace Transformation Approach

    by Augusto Cannone Falchetto, Ki Hoon Moon

    Low-temperature cracking is a severe distress for asphalt pavement built in cold regions. When a steep drop in temperature is experienced, thermal stress develops in the different pavement layers and, as a critical temperature value is reached, cracking occurs. Hence, thermal stress represents a relevant parameter for predicting the low-temperature performance of asphalt pavements. Conventionally, thermal stress is calculated by converting the experimental results of creep compliance to a relaxation modulus and then by numerically solving the convolution integral. Hopkins and Hamming’s algorithm is commonly used for this purpose in many research efforts. In this paper, the use of Laplace transformation is evaluated as an alternative approach since, by using this method, thermal stress and critical temperature can be directly and easily derived without relying on a traditional two-step computation process. The results obtained from Hopkins and Hamming’s solution and from the Laplace transformation ...


  • Open Access

    Testing and modelling of hygro-thermal expansion properties of concrete

    by Jin-Sun Lim, Ki-Hoon Moon, Augusto Cannone Falchetto, Jin-Hoon Jeong


  • Experimental characterisation of base asphalt binder used for shingles production under static and dynamic loading

    by Augusto Cannone Falchetto, Ki Hoon Moon, Michael P. Wistuba

    Significant fluctuations in asphalt binder cost and limited budget for road construction, as well as growing needs for saving natural resources, have contributed to the increased use of recyclable materials in asphalt pavement industries. During the past decades, many transportation agencies in the USA have investigated the effect of adding different types of recycled asphalt shingle (RAS) on the asphalt mixtures performance, while limits were proposed on the maximum amount of RAS that can be recycled. However, not many studies in the USA and Europe have addressed the possibility of directly using base roofing shingles binders for preparing asphalt mixture despite this binder is relatively less expensive than conventional asphalt binders. In this paper, the mechanical performance of base asphalt binder used for roofing flux and shingle production was evaluated with two experimental test methods: bending beam rheometer creep test and dynamic shear rheometer complex modulus test. Based on experimental data, creep stiffness, m-value, thermal stress, critical cracking temperature and complex modulus were calculated and then compared graphically and statistically with the same parameters obtained from two conventional binders commonly used for asphalt pavements. The comparison between the three binders indicates that the shingle binder presents reasonable low and high temperature performance even though the base binder may have different consistency and performance grade compared to the conventional ones. The statistical analysis suggests that the base binder for shingle production can be successfully incorporated into asphalt mixture and that any current specification limiting the content of shingles binder in asphalt mixture should be more asphalt binder type and mix design specific.