Amenallah Guizani
Research Subjects
Amenallah Guizani has a total of 186 co-authors. Here are the top co-authors by number of shared publications:
R. Chouikh
Faculty of Science, Physics Department, King Khalid University
16 shared publicationsMoncef Balghouthi
10 shared publicationsA. Belghith
Laboratoire d'Energétique et des Transferts Thermiques et Massiques (LETTM), Faculté des Sciences de Tunis Université de Tunis El Manar Tunisia
9 shared publicationsRidha Chouikh
8 shared publicationsSami Kooli
8 shared publicationsAbdelhamid Farhat
7 shared publications
Latest Publications
- Open Access
- 29 December 2023
- Published by MDPI AG in Electronics
- Vol. 13 (1) , 164
Investigation of Nano-Heat-Transfer Variability of AlGaN/GaN-Heterostructure-Based High-Electron-Mobility Transistors
The aim of this work is to propose an electrothermal model for predicting the electron mobility, the effective thermal conductivity, and the operating temperature of AlGaN/GaN HEMT devices. The suggested model comprises an enhanced ballistic-diffusive model (BDE) coupled with a drift-diffusion model (D-D). Furthermore, the given model considers total electron mobility, which depends on mobility degradation caused by phonon interactions, surface imperfections, and carrier mobility inside the bulk GaN material. The model is validated based on available experimental and numerical results, and good concordance is observed. It is found that the degradation of the drain current is due to electron mobility and effective thermal conductivity degradation. The output characteristic’s degradation due to changing device temperature is analyzed. We demonstrate that for gate biases of −1 V, 0 V, and 1 V, operating temperatures of 390 K, 470 K, and 570 K are obtained when the drain currents are 0.1 A, 0.24 A, and 0.38 A, respectively. Furthermore, we demonstrate that the temperature is maximal in the active region. The temporal temperature evolution presents the same trends with the same amplitude compared to the experimental data, and the error does not exceed 5%.
- 29 December 2023
- Published by MDPI AG in Electronics
- Vol. 13 (1) , 164
Open AccessInvestigation of Nano-Heat-Transfer Variability of AlGaN/GaN-Heterostructure-Based High-Electron-Mobility Transistors
The aim of this work is to propose an electrothermal model for predicting the electron mobility, the effective thermal conductivity, and the operating temperature of AlGaN/GaN HEMT devices. The suggested model comprises an enhanced ballistic-diffusive model (BDE) coupled with a drift-diffusion model (D-D). Furthermore, the given model considers total electron mobility, which depends on mobility degradation caused by phonon interactions, surface imperfections, and carrier mobility inside the bulk GaN material. The model is validated based on available experimental and numerical results, and good concordance is observed. It is found that the degradation of the drain current is due to electron mobility and effective thermal conductivity degradation. The output characteristic’s degradation due to changing device temperature is analyzed. We demonstrate that for gate biases of −1 V, 0 V, and 1 V, operating temperatures of 390 K, 470 K, and 570 K are obtained when the drain currents are 0.1 A, 0.24 A, and 0.38 A, respectively. Furthermore, we demonstrate that the temperature is maximal in the active region. The temporal temperature evolution presents the same trends with the same amplitude compared to the experimental data, and the error does not exceed 5%.
- Open Access
Hybrid CSP—PV Plants for Jordan, Tunisia and Algeria
Hybrid concentrated solar thermal power (CSP) and photovoltaic (PV) plants are gaining relevance because they combine their advantages: easy installation and low cost of PV plus dispatchability of CSP. This paper presents results of a techno-economic modelling of this hybrid approach for sites in Jordan, Tunisia and Algeria. Local boundary conditions such as meteorology, cost and electricity demand have been considered to determine the best configurations for these three sites. Different CSP technologies with thermal energy storage have been selected. Hybridization with natural gas has also been included. The optimization is done towards minimizing the LCOE while covering the electrical demand 24/7. Results are presented for different CO2 emissions ranges, as the use of fossil fuel has a strong impact on the LCOE and for environmental reasons, it may be preferred to be kept to a minimum. For most of the cases analyzed, the fraction of energy from PV that leads to minimum LCOE is lower than the energy from CSP. It is shown that for countries with a high fuel price, the use of natural gas reduces the LCOE until a share from this source of about 20%. A higher integration of fossil fuel for sites rich in solar irradiation is considered not advantageous if the price of natural gas is above EUR 40/MWh.
Open AccessHybrid CSP—PV Plants for Jordan, Tunisia and Algeria
Hybrid concentrated solar thermal power (CSP) and photovoltaic (PV) plants are gaining relevance because they combine their advantages: easy installation and low cost of PV plus dispatchability of CSP. This paper presents results of a techno-economic modelling of this hybrid approach for sites in Jordan, Tunisia and Algeria. Local boundary conditions such as meteorology, cost and electricity demand have been considered to determine the best configurations for these three sites. Different CSP technologies with thermal energy storage have been selected. Hybridization with natural gas has also been included. The optimization is done towards minimizing the LCOE while covering the electrical demand 24/7. Results are presented for different CO2 emissions ranges, as the use of fossil fuel has a strong impact on the LCOE and for environmental reasons, it may be preferred to be kept to a minimum. For most of the cases analyzed, the fraction of energy from PV that leads to minimum LCOE is lower than the energy from CSP. It is shown that for countries with a high fuel price, the use of natural gas reduces the LCOE until a share from this source of about 20%. A higher integration of fossil fuel for sites rich in solar irradiation is considered not advantageous if the price of natural gas is above EUR 40/MWh.
- 15 October 2021
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 46 (3) , 2477-2499
A novel mathematical approach for the optical efficiency optimization of solar tower power plant technology
Solar tower power plant technology is based on the principle of concentrating incident solar irradiation on a receiving surface located at the top of the tower via a mirror field. The heliostat field consists of a significant number of reflective mirrors; each heliostat tracks the Sun individually and reflects the Sun's incident rays at a focal point. Therefore, the heliostat position plays a major role in the global system efficiency and must be carefully chosen to minimize optical losses. In this paper, a mathematical model was proposed for the analysis of the optical efficiency of the solar tower power plant. Detailed optical losses are mainly losses by blockage, shading, spillage, and atmospheric mitigation. During this study, the approach was oriented toward the optical study of the solar thermal power plant: a new method for calculating the blocked and shaded surface has been developed. This new method was then validated basing on the database of the marketed solar power plant PS10 installation with a north heliostat field configuration geometry, as well as a validation was elaborated based on a surrounding heliostat field configuration geometry. Obtained results show that the individual heliostat efficiency is in the range of 0.824; based on published papers, the calculation error factor is in the order of 0.01%. Numerical results of the shading and blocking efficiencies prove the reliability of the developed model. In the first hand, the model is valid whatever the heliostat parameter (its row, heliostat orientation, its position according to their neighbor, etc). On the other hand, the developed model is applicable in all heliostat field configurations; it is valid in both surrounding and north configurations.
- 15 October 2021
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 46 (3) , 2477-2499
A novel mathematical approach for the optical efficiency optimization of solar tower power plant technology
Solar tower power plant technology is based on the principle of concentrating incident solar irradiation on a receiving surface located at the top of the tower via a mirror field. The heliostat field consists of a significant number of reflective mirrors; each heliostat tracks the Sun individually and reflects the Sun's incident rays at a focal point. Therefore, the heliostat position plays a major role in the global system efficiency and must be carefully chosen to minimize optical losses. In this paper, a mathematical model was proposed for the analysis of the optical efficiency of the solar tower power plant. Detailed optical losses are mainly losses by blockage, shading, spillage, and atmospheric mitigation. During this study, the approach was oriented toward the optical study of the solar thermal power plant: a new method for calculating the blocked and shaded surface has been developed. This new method was then validated basing on the database of the marketed solar power plant PS10 installation with a north heliostat field configuration geometry, as well as a validation was elaborated based on a surrounding heliostat field configuration geometry. Obtained results show that the individual heliostat efficiency is in the range of 0.824; based on published papers, the calculation error factor is in the order of 0.01%. Numerical results of the shading and blocking efficiencies prove the reliability of the developed model. In the first hand, the model is valid whatever the heliostat parameter (its row, heliostat orientation, its position according to their neighbor, etc). On the other hand, the developed model is applicable in all heliostat field configurations; it is valid in both surrounding and north configurations.
- 9 January 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (18) , 22510-22521
The assessment of buildings and constructions sector of economy proposal: an environmental perspective
Environmental impact assessment methods suffer from an applicability issue which could impede their use and development. The main subject of this article is to present a method to evaluate the applicability of building environmental assessment method in a given country. Here, when we say that a method is applicable in a given country, it means that it could be widely used and that it could produce the expected effects in terms of energy savings, environmental impact minimization, economic gain, etc. So, for this applicability evaluation purpose, the main criteria that affect the building environmental assessment method applicability were identified and were weighted by studying different scenarios. Then, the evaluation method was applied to the Tunisian case. Moreover, in order to contribute to a better understanding of the importance of building environmental assessment method implementation, stakes related thereto are reviewed. It was reported that building environmental assessment method would concur to improve building energy efficiency, enhance social capital, and contribute to environmental, social, and economic stability. In addition, it could be one of the major solutions for the collection of statistical data, which in turn would contribute to the success of projects undertaken as part of the green economy. Eventually, the building environmental assessment could be one of the major green marketing tools and should be taken into account by a company to improve profitability. The developed method and the presented stakes could be a good management and decision making tools and could help legislators and policy-makers for the best implementation of building environmental assessment method.
- 9 January 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (18) , 22510-22521
The assessment of buildings and constructions sector of economy proposal: an environmental perspective
Environmental impact assessment methods suffer from an applicability issue which could impede their use and development. The main subject of this article is to present a method to evaluate the applicability of building environmental assessment method in a given country. Here, when we say that a method is applicable in a given country, it means that it could be widely used and that it could produce the expected effects in terms of energy savings, environmental impact minimization, economic gain, etc. So, for this applicability evaluation purpose, the main criteria that affect the building environmental assessment method applicability were identified and were weighted by studying different scenarios. Then, the evaluation method was applied to the Tunisian case. Moreover, in order to contribute to a better understanding of the importance of building environmental assessment method implementation, stakes related thereto are reviewed. It was reported that building environmental assessment method would concur to improve building energy efficiency, enhance social capital, and contribute to environmental, social, and economic stability. In addition, it could be one of the major solutions for the collection of statistical data, which in turn would contribute to the success of projects undertaken as part of the green economy. Eventually, the building environmental assessment could be one of the major green marketing tools and should be taken into account by a company to improve profitability. The developed method and the presented stakes could be a good management and decision making tools and could help legislators and policy-makers for the best implementation of building environmental assessment method.
- 29 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Study of structural characteristics of wind-speed natural ventilation on single span greenhouse
Natural ventilation used in agricultural greenhouses plays a critical role to control greenhouse microclimate. The effect of flow pattern, temperature field and ventilation scenarios on the flow rate were investigated in this study. Three scenarios of the roof openings were evaluated by using the technique of nitrous oxide as a tracer gas. The air movements, the temperature field and the efficiencies of ventilation on flow rate by inlet opening at the windward side to the outlet opening at roof leeward were numerically studied. Results show that opening configurations combined with wind speeds strongly affect inside ventilation and microclimate parameters. The efficiency of ventilation was considered by reducing the ventilation rate by the vent opening area. The CFD model used was validated by comparing experimental data and simulation analysis.
- 29 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Study of structural characteristics of wind-speed natural ventilation on single span greenhouse
Natural ventilation used in agricultural greenhouses plays a critical role to control greenhouse microclimate. The effect of flow pattern, temperature field and ventilation scenarios on the flow rate were investigated in this study. Three scenarios of the roof openings were evaluated by using the technique of nitrous oxide as a tracer gas. The air movements, the temperature field and the efficiencies of ventilation on flow rate by inlet opening at the windward side to the outlet opening at roof leeward were numerically studied. Results show that opening configurations combined with wind speeds strongly affect inside ventilation and microclimate parameters. The efficiency of ventilation was considered by reducing the ventilation rate by the vent opening area. The CFD model used was validated by comparing experimental data and simulation analysis.
- 1 April 2020
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 304
Study of thermal conductivity of synthesized Al2O3-water nanofluid by pulsed laser ablation in liquid
- 1 April 2020
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 304
Study of thermal conductivity of synthesized Al2O3-water nanofluid by pulsed laser ablation in liquid
- 1 March 2020
- Published by Elsevier in Applied Thermal Engineering
- Vol. 169
Analysis of an integrated collector storage system with vacuum glazing and compound parabolic concentrator
- 1 March 2020
- Published by Elsevier in Applied Thermal Engineering
- Vol. 169
Analysis of an integrated collector storage system with vacuum glazing and compound parabolic concentrator
- 23 January 2020
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 135 (1) , 109
Interfacial heat transport across multilayer nanofilms in ballistic–diffusive regime
- 23 January 2020
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 135 (1) , 109
Interfacial heat transport across multilayer nanofilms in ballistic–diffusive regime
- 1 January 2020
- Published by Elsevier in Applied Thermal Engineering
- Vol. 165
Performance analysis of two types of Solar Heating Systems used in buildings under typical North-African climate (Tunisia)
- 1 January 2020
- Published by Elsevier in Applied Thermal Engineering
- Vol. 165
Performance analysis of two types of Solar Heating Systems used in buildings under typical North-African climate (Tunisia)