Shu Liu
Research Subjects
Shu Liu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Hong Lu
School of Mechanical and Electronic Engineering Wuhan University of Technology Wuhan China
2 shared publications - Shijie Liu
School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan, China
2 shared publications - Yongquan Zhang
School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China
2 shared publications - Essa Alghannam
School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China
1 shared publication - He Huang
School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China
1 shared publication Hong Lu
School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan, China
1 shared publication
Latest Publications
- Open Access
- 1 June 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2281 (1) , 012001
A Speed Adaptive Path Planning Method based on Line Structured Light Information for Robotic Multi-layer/Multi-pass Welding
Regarding the geometrical errors existed in the welding grooves for the large steel structures, the traditional path planning method for robotic multi-layer/multi-pass welding cannot guarantee welding quality. In this paper, a speed adaptive path planning method based on line structured light information for robotic multi-layer/multi-pass welding is proposed. Firstly, the initial welding path is planned according to the average section dimensions of grooves, which are obtained by measured data using line structured light based on the proposed section extraction algorithm. Then, considering the geometrical errors represented by the different section dimensions, the welding speed is adaptively planned to make the molten pool fit the actual dimensions of the welding pass. Simultaneously, the welding path is compensated by the relationship between the welding speed and its corresponding dimensions of molten pool. Finally, the speed adaptive multi-layer/multi-pass welding with box-style steel structures have been experimentally investigated. The proposed planning method can be implemented to improve the welding quality of the grooves in the large steel structures.
- 1 June 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2281 (1) , 012001
Open AccessA Speed Adaptive Path Planning Method based on Line Structured Light Information for Robotic Multi-layer/Multi-pass Welding
Regarding the geometrical errors existed in the welding grooves for the large steel structures, the traditional path planning method for robotic multi-layer/multi-pass welding cannot guarantee welding quality. In this paper, a speed adaptive path planning method based on line structured light information for robotic multi-layer/multi-pass welding is proposed. Firstly, the initial welding path is planned according to the average section dimensions of grooves, which are obtained by measured data using line structured light based on the proposed section extraction algorithm. Then, considering the geometrical errors represented by the different section dimensions, the welding speed is adaptively planned to make the molten pool fit the actual dimensions of the welding pass. Simultaneously, the welding path is compensated by the relationship between the welding speed and its corresponding dimensions of molten pool. Finally, the speed adaptive multi-layer/multi-pass welding with box-style steel structures have been experimentally investigated. The proposed planning method can be implemented to improve the welding quality of the grooves in the large steel structures.
- Open Access
Towards a Uniform Welding Quality: A Novel Weaving Welding Control Algorithm Based on Constant Heat Input
The weaving welding process is a key method used to improve the welding quality in multi-layer and multi-pass welding processes using robots. However, the heat-input fluctuation in the weaving welding process restricts its development. In this paper, we developed a novel weaving welding control algorithm to maintain a constant weld heat input through velocity adaptive planning. First, the heat consumption during the weaving welding was modeled to describe the influence of weaving parameters on the weld heat input. Then, based on the obtained relationship between the weld heat input and the weaving parameters, a velocity-adaptive trajectory planning strategy was proposed by leveraging the transformation matrix derived from the relationship between the workpiece and the robot co-ordinate systems. The simulation and experimental results show that the proposed strategy can compensate for the weaving parameters to maintain a constant heat input based on heat consumption and improve the quality of the robotic multi-layer and multi-pass welding process.
Open AccessTowards a Uniform Welding Quality: A Novel Weaving Welding Control Algorithm Based on Constant Heat Input
The weaving welding process is a key method used to improve the welding quality in multi-layer and multi-pass welding processes using robots. However, the heat-input fluctuation in the weaving welding process restricts its development. In this paper, we developed a novel weaving welding control algorithm to maintain a constant weld heat input through velocity adaptive planning. First, the heat consumption during the weaving welding was modeled to describe the influence of weaving parameters on the weld heat input. Then, based on the obtained relationship between the weld heat input and the weaving parameters, a velocity-adaptive trajectory planning strategy was proposed by leveraging the transformation matrix derived from the relationship between the workpiece and the robot co-ordinate systems. The simulation and experimental results show that the proposed strategy can compensate for the weaving parameters to maintain a constant heat input based on heat consumption and improve the quality of the robotic multi-layer and multi-pass welding process.
- Open Access
Visual-Based Multi-Section Welding Path Generation Algorithm
As an important form of additive manufacturing, welding is widely used in steel components welding work of construction, shipbuilding and other fields. In this study, an intelligent welding path generation algorithm based on multi-section interpolation is proposed in order to deal with non-standard multi-pass welding grooves which are difficult to be handled by automatic welding equipment in the construction site. Firstly, the non-standard grooves are classified and the reasons for their occurrence are discussed. Secondly, an automatic welding additive manufacturing system framework is discussed and an appropriate detection method is selected. Then, combining with the welding standard of non-standard grooves and the characteristics of the welding process, a multi-section interpolation-based welding path generation algorithm is proposed. Finally, a visual experiment platform was built to detection the typical non-standard groove and the welding experiment is implemented to verify the feasibility of the algorithm. According to the path generated by the algorithm, the welded steel components test plate meets the actual engineering standard after quality inspection. The experimental results and simulation results conclude the algorithm can be used to generate the welding path of the non-standard groove.
Open AccessVisual-Based Multi-Section Welding Path Generation Algorithm
As an important form of additive manufacturing, welding is widely used in steel components welding work of construction, shipbuilding and other fields. In this study, an intelligent welding path generation algorithm based on multi-section interpolation is proposed in order to deal with non-standard multi-pass welding grooves which are difficult to be handled by automatic welding equipment in the construction site. Firstly, the non-standard grooves are classified and the reasons for their occurrence are discussed. Secondly, an automatic welding additive manufacturing system framework is discussed and an appropriate detection method is selected. Then, combining with the welding standard of non-standard grooves and the characteristics of the welding process, a multi-section interpolation-based welding path generation algorithm is proposed. Finally, a visual experiment platform was built to detection the typical non-standard groove and the welding experiment is implemented to verify the feasibility of the algorithm. According to the path generated by the algorithm, the welded steel components test plate meets the actual engineering standard after quality inspection. The experimental results and simulation results conclude the algorithm can be used to generate the welding path of the non-standard groove.