Tielin Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tielin Ma has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Jingcheng Fu
Institute of Unmanned System, Beihang University, Beijing 100191, China
7 shared publications - Xiangsheng Wang
School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China
4 shared publications - Nanxuan Qiao
School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China
3 shared publications - Pu Xue
School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China
3 shared publications - Ligang Zhang
Institute of Unmanned System, Beihang University, Beijing 100191, China
2 shared publications - Tianhui Guo
School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China
2 shared publications
Latest Publications
- Open Access
Dynamic Estimation of Formation Wake Flow Fields Based on On-Board Sensing
Close formation flight is a practical strategy for fixed-wing unmanned aerial vehicle (UAV) swarms. Maintaining UAVs at aerodynamically optimal positions is essential for efficient formation flight. However, aerodynamic optimization methods based on computational fluid dynamics (CFD) are computationally intensive and difficult to apply in real time for large-scale formations. Inspired by bio-formation flight, this study proposes an on-board sensing-based method for wake flow field estimation, with potential for extension to complex formations. The method is based on a parameter identification-induced velocity model (PI-Model), which uses only onboard sensors, including two lateral air data systems (ADS), to sample the wake field. By minimizing the residual of the induced velocity, the model identifies key parameters of the wake and provides a dynamic estimation of the wake velocity field. Comparisons between the PI-Model and CFD simulations show that it achieves higher accuracy than the widely used single horseshoe vortex model in both wake velocity and aerodynamic effects. Applied to a two-UAV formation scenario, CFD validation confirms that the trailing UAV achieves a 15–25% drag reduction. These results verify the effectiveness of the proposed method for formation flight and demonstrate its potential for application in complex, dynamic multi-UAV formations.
Open AccessDynamic Estimation of Formation Wake Flow Fields Based on On-Board Sensing
Close formation flight is a practical strategy for fixed-wing unmanned aerial vehicle (UAV) swarms. Maintaining UAVs at aerodynamically optimal positions is essential for efficient formation flight. However, aerodynamic optimization methods based on computational fluid dynamics (CFD) are computationally intensive and difficult to apply in real time for large-scale formations. Inspired by bio-formation flight, this study proposes an on-board sensing-based method for wake flow field estimation, with potential for extension to complex formations. The method is based on a parameter identification-induced velocity model (PI-Model), which uses only onboard sensors, including two lateral air data systems (ADS), to sample the wake field. By minimizing the residual of the induced velocity, the model identifies key parameters of the wake and provides a dynamic estimation of the wake velocity field. Comparisons between the PI-Model and CFD simulations show that it achieves higher accuracy than the widely used single horseshoe vortex model in both wake velocity and aerodynamic effects. Applied to a two-UAV formation scenario, CFD validation confirms that the trailing UAV achieves a 15–25% drag reduction. These results verify the effectiveness of the proposed method for formation flight and demonstrate its potential for application in complex, dynamic multi-UAV formations.
- Open Access
- 15 October 2025
- Published by MDPI AG in Preprints.org
Dynamic Estimation of Formation Wake Flow Fields Based on On-Board Sensing
Close formation flight is a practical strategy for fixed-wing unmanned aerial vehicle (UAV) swarms. Maintaining UAVs at aerodynamically optimal positions is essential for efficient formation flight. However, aerodynamic optimization methods based on computational fluid dynamics (CFD) are computationally intensive and difficult to apply in real time for large-scale formations. Inspired by bio-formation flight, this study proposes an on-board sensing-based method for wake flow field estimation, with potential for extension to complex formations. The method is based on a parameter identification-induced velocity model (PI-Model), which uses only onboard sensors, including two lateral air data systems (ADS), to sample the wake field. By minimizing the residual of the induced velocity, the model identifies key parameters of the wake and provides a dynamic estimation of the wake velocity field. Comparisons between the PI-Model and CFD simulations show that it achieves higher accuracy than the widely used single horseshoe vortex model in both wake velocity and aerodynamic effects. Applied to a two-UAV formation scenario, CFD validation confirms that the trailing UAV achieves a 15%–25% drag reduction. These results verify the effectiveness of the proposed method for formation flight and demonstrate its potential for application in complex, dynamic multi-UAV formations.
- 15 October 2025
- Published by MDPI AG in Preprints.org
Open AccessDynamic Estimation of Formation Wake Flow Fields Based on On-Board Sensing
Close formation flight is a practical strategy for fixed-wing unmanned aerial vehicle (UAV) swarms. Maintaining UAVs at aerodynamically optimal positions is essential for efficient formation flight. However, aerodynamic optimization methods based on computational fluid dynamics (CFD) are computationally intensive and difficult to apply in real time for large-scale formations. Inspired by bio-formation flight, this study proposes an on-board sensing-based method for wake flow field estimation, with potential for extension to complex formations. The method is based on a parameter identification-induced velocity model (PI-Model), which uses only onboard sensors, including two lateral air data systems (ADS), to sample the wake field. By minimizing the residual of the induced velocity, the model identifies key parameters of the wake and provides a dynamic estimation of the wake velocity field. Comparisons between the PI-Model and CFD simulations show that it achieves higher accuracy than the widely used single horseshoe vortex model in both wake velocity and aerodynamic effects. Applied to a two-UAV formation scenario, CFD validation confirms that the trailing UAV achieves a 15%–25% drag reduction. These results verify the effectiveness of the proposed method for formation flight and demonstrate its potential for application in complex, dynamic multi-UAV formations.
- Open Access
Multi-Phase Trajectory Planning for Wind Energy Harvesting in Air-Launched UAV Swarm Rendezvous and Formation Flight
Small air-launched unmanned aerial vehicles (UAVs) face challenges in range and endurance due to their compact size and lightweight design. To address these issues, this paper introduces a multi-phase wind energy harvesting trajectory planning method designed to optimize the onboard electrical energy consumption during rendezvous and formation flight of air-launched fixed-wing swarms. This method strategically manages gravitational potential energy from air-launch deployments and harvests wind energy that aligns with the UAV’s flight speed. We integrate wind energy harvesting strategies for single vehicles with the spatial–temporal coordination of the swarm system. Considering the wind effects into the trajectory planning allows UAVs to enhance their operational capabilities and extend mission duration without changes on the vehicle design. The trajectory planning method is formalized as an optimal control problem (OCP) that ensures spatial–temporal coordination, inter-vehicle collision avoidance, and incorporates a 3-degree of freedom kinematic model of UAVs, extending wind energy harvesting trajectory optimization from an individual UAV to swarm-level applications. The cost function is formulized to comprehensively evaluate electrical energy consumption, endurance, and range. Simulation results demonstrate significant energy savings in both low- and high-altitude mission scenarios. Efficient wind energy utilization can double the maximum formation rendezvous distance and even allow for rendezvous without electrical power consumption when the phase durations are extended reasonably. The subsequent formation flight phase exhibits a maximum endurance increase of 58%. This reduction in electrical energy consumption directly extends the range and endurance of air-launched swarm, thereby enhancing the mission capabilities of the swarm in subsequent flight.
Open AccessMulti-Phase Trajectory Planning for Wind Energy Harvesting in Air-Launched UAV Swarm Rendezvous and Formation Flight
Small air-launched unmanned aerial vehicles (UAVs) face challenges in range and endurance due to their compact size and lightweight design. To address these issues, this paper introduces a multi-phase wind energy harvesting trajectory planning method designed to optimize the onboard electrical energy consumption during rendezvous and formation flight of air-launched fixed-wing swarms. This method strategically manages gravitational potential energy from air-launch deployments and harvests wind energy that aligns with the UAV’s flight speed. We integrate wind energy harvesting strategies for single vehicles with the spatial–temporal coordination of the swarm system. Considering the wind effects into the trajectory planning allows UAVs to enhance their operational capabilities and extend mission duration without changes on the vehicle design. The trajectory planning method is formalized as an optimal control problem (OCP) that ensures spatial–temporal coordination, inter-vehicle collision avoidance, and incorporates a 3-degree of freedom kinematic model of UAVs, extending wind energy harvesting trajectory optimization from an individual UAV to swarm-level applications. The cost function is formulized to comprehensively evaluate electrical energy consumption, endurance, and range. Simulation results demonstrate significant energy savings in both low- and high-altitude mission scenarios. Efficient wind energy utilization can double the maximum formation rendezvous distance and even allow for rendezvous without electrical power consumption when the phase durations are extended reasonably. The subsequent formation flight phase exhibits a maximum endurance increase of 58%. This reduction in electrical energy consumption directly extends the range and endurance of air-launched swarm, thereby enhancing the mission capabilities of the swarm in subsequent flight.
- Open Access
- 4 January 2024
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 37 (3) , 77-91
An approach for formation design and flight performance prediction based on aerodynamic formation unit: Energy-saving considerations
- 4 January 2024
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 37 (3) , 77-91
Open AccessAn approach for formation design and flight performance prediction based on aerodynamic formation unit: Energy-saving considerations
- Open Access
Gust Alleviation by Active–Passive Combined Control of the Flight Platform and Antenna Array for a Flying Wing SensorCraft
SensorCraft is an intelligence, surveillance, and reconnaissance (ISR) system that integrates unmanned flight platforms and airborne antenna arrays. Under gust loads, the high–aspect–ratio, light–wing structure of SensorCraft has considerable bending and torsion deformation, affecting the flight performance of unmanned flight platforms and leading to the loss of antenna arrays’ electromagnetic performance. Taking SensorCraft as the background, a wing conformal antenna array was designed, an aircraft model with a passive wingtip device was established, a control law was developed by the LQG/LTR method, and a gust alleviation active–passive combined control method of a “LQG/LTR active controller + passive wingtip device” was proposed. By constructing an unsteady aerodynamic reduced–order model (ROM) based on the Volterra series and a conformal array pattern fast method based on the modal form, the effectiveness of the gust alleviation active–passive combined control method on the aircraft platform and antenna array was analyzed. The results show that structural deformation of the wing conformal antenna leads to changes in the main lobe gain, beam direction, and sidelobe level. The active–passive gust alleviation method has obvious advantages. Compared with the LQG/LTR active gust alleviation method, the peak value of wingtip displacement is reduced by 15.6%, and the peak value of the gain loss is reduced by 0.72 dB, which is conducive to better performance of the airborne conformal antenna array.
Open AccessGust Alleviation by Active–Passive Combined Control of the Flight Platform and Antenna Array for a Flying Wing SensorCraft
SensorCraft is an intelligence, surveillance, and reconnaissance (ISR) system that integrates unmanned flight platforms and airborne antenna arrays. Under gust loads, the high–aspect–ratio, light–wing structure of SensorCraft has considerable bending and torsion deformation, affecting the flight performance of unmanned flight platforms and leading to the loss of antenna arrays’ electromagnetic performance. Taking SensorCraft as the background, a wing conformal antenna array was designed, an aircraft model with a passive wingtip device was established, a control law was developed by the LQG/LTR method, and a gust alleviation active–passive combined control method of a “LQG/LTR active controller + passive wingtip device” was proposed. By constructing an unsteady aerodynamic reduced–order model (ROM) based on the Volterra series and a conformal array pattern fast method based on the modal form, the effectiveness of the gust alleviation active–passive combined control method on the aircraft platform and antenna array was analyzed. The results show that structural deformation of the wing conformal antenna leads to changes in the main lobe gain, beam direction, and sidelobe level. The active–passive gust alleviation method has obvious advantages. Compared with the LQG/LTR active gust alleviation method, the peak value of wingtip displacement is reduced by 15.6%, and the peak value of the gain loss is reduced by 0.72 dB, which is conducive to better performance of the airborne conformal antenna array.
- Open Access
Rapid Blade Shape Optimization for Contra-Rotating Propellers for eVTOL Aircraft Considering the Aerodynamic Interference
The rising interest in the evolvability of electric vertical takeoff and landing (eVTOL) promises substantial potential in the field of urban air mobility (UAM). Challenges in energy storage density and geometry restriction both emphasize the propeller efficiency for endurance and takeoff weight, whereas the contra-rotating propellers (CRP) advantage is balancing high thrust and efficiency over a single propeller. The aim of this paper is twofold: (i) to present a novel rapid CRP blade shape optimization framework and (ii) to study the impact of the dual propellers revolution speed allocations on the overall CRP power efficiency. The core of the framework is the blade element momentum theory (BEMT)-based blade shape optimization considering the wake effect of the upper propeller by the rotational CFD (computational fluid dynamics) actuator-disc simulation method. The results show that for the same thrust, the optimized CRP at the equal revolution speed is superior to the original (upper-lower-identical) one by 5.9% in thrust-to-power ratio. The overall efficiency can be additionally lifted by 5.3% when the dual propellers share similar torques. By excluding the integral propeller CFD simulation and empirical parameters estimation, the framework enables the swift obtaining of an optimized CRP scheme while maintaining robustness as well.
Open AccessRapid Blade Shape Optimization for Contra-Rotating Propellers for eVTOL Aircraft Considering the Aerodynamic Interference
The rising interest in the evolvability of electric vertical takeoff and landing (eVTOL) promises substantial potential in the field of urban air mobility (UAM). Challenges in energy storage density and geometry restriction both emphasize the propeller efficiency for endurance and takeoff weight, whereas the contra-rotating propellers (CRP) advantage is balancing high thrust and efficiency over a single propeller. The aim of this paper is twofold: (i) to present a novel rapid CRP blade shape optimization framework and (ii) to study the impact of the dual propellers revolution speed allocations on the overall CRP power efficiency. The core of the framework is the blade element momentum theory (BEMT)-based blade shape optimization considering the wake effect of the upper propeller by the rotational CFD (computational fluid dynamics) actuator-disc simulation method. The results show that for the same thrust, the optimized CRP at the equal revolution speed is superior to the original (upper-lower-identical) one by 5.9% in thrust-to-power ratio. The overall efficiency can be additionally lifted by 5.3% when the dual propellers share similar torques. By excluding the integral propeller CFD simulation and empirical parameters estimation, the framework enables the swift obtaining of an optimized CRP scheme while maintaining robustness as well.
- Open Access
Three-Dimensional Flight Envelope for V/STOL Aircraft with Multiple Flight Modes
Vertical or short take-off and landing (V/STOL) aircraft generally have three flight modes, namely, vertical take-off and landing (VTOL), conversion, and cruise, according to the variable angle of propulsion direction to the fuselage axis. However, the traditional flight envelope or conversion corridor lacks the capability to comprehensively present the flight characteristics of these three modes. Pursuant to this, the purpose of this paper was to present a three-dimensional (3D) flight envelope that combines propulsion direction, airspeed, and altitude in one figure. The 3D envelope was constructed subject to the constraints of power rating and equilibrium conditions. To verify its effectiveness, the flight data of XV-15 was used to generate the 3D envelope, following the projection along with the cross-section, which was compared with the traditional flight envelope and conversion corridor, respectively. The maximum specific excess power (SEP) of each flight state was also promptly obtained. In the case study, the flight performance of a rotor-wing aircraft was comprehensively analyzed using the generated 3D envelope. The proposed method in this study exhibited its versatility and capability to demonstrate the performance in all flight modes intuitively, which promoted the efficiency of V/STOL aircraft flight performance analysis as well.
Open AccessThree-Dimensional Flight Envelope for V/STOL Aircraft with Multiple Flight Modes
Vertical or short take-off and landing (V/STOL) aircraft generally have three flight modes, namely, vertical take-off and landing (VTOL), conversion, and cruise, according to the variable angle of propulsion direction to the fuselage axis. However, the traditional flight envelope or conversion corridor lacks the capability to comprehensively present the flight characteristics of these three modes. Pursuant to this, the purpose of this paper was to present a three-dimensional (3D) flight envelope that combines propulsion direction, airspeed, and altitude in one figure. The 3D envelope was constructed subject to the constraints of power rating and equilibrium conditions. To verify its effectiveness, the flight data of XV-15 was used to generate the 3D envelope, following the projection along with the cross-section, which was compared with the traditional flight envelope and conversion corridor, respectively. The maximum specific excess power (SEP) of each flight state was also promptly obtained. In the case study, the flight performance of a rotor-wing aircraft was comprehensively analyzed using the generated 3D envelope. The proposed method in this study exhibited its versatility and capability to demonstrate the performance in all flight modes intuitively, which promoted the efficiency of V/STOL aircraft flight performance analysis as well.
- Open Access
A Conceptual Design and Optimization Approach for Distributed Electric Propulsion eVTOL Aircraft Based on Ducted-Fan Wing Unit
The distributed electric propulsion (DEP) eVTOL aircraft has gained rising interest for its promising potential in high-speed cruise compared with conventional tilt-rotor configuration. The aerodynamic interference of the DEP units and wing could become more complicated with a variable thrust in multiple flight conditions. Thus, it requires considerable effort to trade off in the whole design process. Aimed at improving the design efficiency in iteration cycling of a ducted-fan DEP eVTOL aircraft, a conceptual design and optimization approach is proposed in this paper regarding the single-ducted fan and its surrounding wing section as the basic unit. The optimization of the ducted-fan wing (DFW) unit is targeted at improving both hover and cruise efficiencies. After the verification of the span independence of the lift-and-drag coefficients of the DFW unit, a novel DEP eVTOL aircraft conceptual design approach is established based on the vertical meridional plane DFW unit performance analysis. In the following case study, the optimized DFW unit and the conceptual method are applied on a canard configuration, achieving 720 km/h maximum speed, a hovering efficiency of 76.3%, and a 10.7 cruise lift-to-drag ratio. The remarkable performance and concise workflow in the case study both demonstrated the applicability and effectiveness of the proposed design schemes for DEP eVTOL aircraft.
Open AccessA Conceptual Design and Optimization Approach for Distributed Electric Propulsion eVTOL Aircraft Based on Ducted-Fan Wing Unit
The distributed electric propulsion (DEP) eVTOL aircraft has gained rising interest for its promising potential in high-speed cruise compared with conventional tilt-rotor configuration. The aerodynamic interference of the DEP units and wing could become more complicated with a variable thrust in multiple flight conditions. Thus, it requires considerable effort to trade off in the whole design process. Aimed at improving the design efficiency in iteration cycling of a ducted-fan DEP eVTOL aircraft, a conceptual design and optimization approach is proposed in this paper regarding the single-ducted fan and its surrounding wing section as the basic unit. The optimization of the ducted-fan wing (DFW) unit is targeted at improving both hover and cruise efficiencies. After the verification of the span independence of the lift-and-drag coefficients of the DFW unit, a novel DEP eVTOL aircraft conceptual design approach is established based on the vertical meridional plane DFW unit performance analysis. In the following case study, the optimized DFW unit and the conceptual method are applied on a canard configuration, achieving 720 km/h maximum speed, a hovering efficiency of 76.3%, and a 10.7 cruise lift-to-drag ratio. The remarkable performance and concise workflow in the case study both demonstrated the applicability and effectiveness of the proposed design schemes for DEP eVTOL aircraft.
- 25 September 2020
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 125 (1283) , 22-41
Research on the design of smart morphing long-endurance UAVs
To improve the endurance performance of long-endurance Unmanned Aerial Vehicles (UAVs), a smart morphing method to adjust the UAV and flight mode continuously during flight is proposed. Using this method as a starting point, a smart morphing long-endurance UAV design is conducted and the resulting improvement in the endurance performance studied. Firstly, the initial overall design of the smart morphing long-endurance UAV is carried out, then the morphing form is designed and various control parameters are selected. Secondly, based on multi-agent theory, an architecture for the smart morphing control system is built and the workflow of the smart morphing control system is planned. The morphing decision method is designed in detail based on the particle swarm optimisation algorithm. Finally, a simulation of the smart morphing approach in the climb and cruise stages is carried out to quantitatively verify the improvement in the endurance performance. The simulation results show that the smart morphing method can improve the cruise time by 4.1% with the same fuel consumption.
- 25 September 2020
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 125 (1283) , 22-41
Research on the design of smart morphing long-endurance UAVs
To improve the endurance performance of long-endurance Unmanned Aerial Vehicles (UAVs), a smart morphing method to adjust the UAV and flight mode continuously during flight is proposed. Using this method as a starting point, a smart morphing long-endurance UAV design is conducted and the resulting improvement in the endurance performance studied. Firstly, the initial overall design of the smart morphing long-endurance UAV is carried out, then the morphing form is designed and various control parameters are selected. Secondly, based on multi-agent theory, an architecture for the smart morphing control system is built and the workflow of the smart morphing control system is planned. The morphing decision method is designed in detail based on the particle swarm optimisation algorithm. Finally, a simulation of the smart morphing approach in the climb and cruise stages is carried out to quantitatively verify the improvement in the endurance performance. The simulation results show that the smart morphing method can improve the cruise time by 4.1% with the same fuel consumption.
- Open Access
- 11 July 2020
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2020, 1-17
Parameter Adaptive Terminal Sliding Mode Control of Flexible Coupling Air-Breathing Hypersonic Vehicle
The highly nonlinear and coupling characteristics of a flexible air-breathing hypersonic vehicle create great challenges to its flight control design. A unique parameter adaptive nonsingular terminal sliding mode method is proposed for longitudinal control law design of a flexible coupling air-breathing hypersonic vehicle. This method uses adaptive reaching law gain instead of the additional adaptive compensation term to handle the uncertainty to improve robustness. The stability of the close loop system is proved via a Lyapunov way. The longitudinal tracking control law for velocity and angle of attack is designed based on a rigid dynamic model of a flexible air-breathing hypersonic vehicle. A strong coupling model of the same vehicle, considering aerodynamic-scramjet engine-flight dynamic-elastic couplings, is established as the verification platform of the designed control law. The remarkable differences of flight dynamic characteristics between this strong coupling model and the rigid body model can be seen, which mean the controller needs to endure very great uncertainty, unmodeled dynamics, and other types of internal disturbance. Simulation results based on the coupling model demonstrate that the designed control law has good performance and acceptable robustness.
- 11 July 2020
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2020, 1-17
Open AccessParameter Adaptive Terminal Sliding Mode Control of Flexible Coupling Air-Breathing Hypersonic Vehicle
The highly nonlinear and coupling characteristics of a flexible air-breathing hypersonic vehicle create great challenges to its flight control design. A unique parameter adaptive nonsingular terminal sliding mode method is proposed for longitudinal control law design of a flexible coupling air-breathing hypersonic vehicle. This method uses adaptive reaching law gain instead of the additional adaptive compensation term to handle the uncertainty to improve robustness. The stability of the close loop system is proved via a Lyapunov way. The longitudinal tracking control law for velocity and angle of attack is designed based on a rigid dynamic model of a flexible air-breathing hypersonic vehicle. A strong coupling model of the same vehicle, considering aerodynamic-scramjet engine-flight dynamic-elastic couplings, is established as the verification platform of the designed control law. The remarkable differences of flight dynamic characteristics between this strong coupling model and the rigid body model can be seen, which mean the controller needs to endure very great uncertainty, unmodeled dynamics, and other types of internal disturbance. Simulation results based on the coupling model demonstrate that the designed control law has good performance and acceptable robustness.