Lingsheng Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lingsheng Han has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Yongqing Wang
State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian 116024, China
5 shared publications - Kuo Liu
School of Mechanical Engineering, Dalian University of Technology, Dalian, China
4 shared publications - Haibo Liu
State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian 116024, China
3 shared publications - Bo Qin
School of Mechanical Engineering, Dalian University of Technology, Dalian, China
2 shared publications - Minghua Dai
School of Mechanical Engineering, Dalian University of Technology, No. 2 Linggong Road, Ganjingzi District, Dalian City 116024, Liaoning Province, China
2 shared publications - Yongquan Gan
School of Mechanical Engineering, Dalian University of Technology, No. 2 Linggong Road, Ganjingzi District, Dalian City 116024, Liaoning Province, China
2 shared publications
Latest Publications
- 26 February 2024
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 146 (4) , 1-49
Force-Induced Deformation Mechanism for Cylindrical Shell Thin-Walled Parts Milling With Ice Supporting: Modeling and Prediction
Improving the rigidity of the process system in the cutting region of thin-walled parts is a challenging problem to ensure machining accuracy. For limited structural space, the use of ice support is an effective method. However, ice and workpiece constitute a completely new process system, which generates a complex process response under milling forces. Based on the Kirchhoff–Love thin-wall small-deformation assumption and the Winkler model for describing the inverse support of ice on cylindrical shell thin-walled parts (CSTWPs), a new prediction model is developed to predict the deflection of CSTWP under ice support. In the model, by introducing the displacement function in the form of annular triangular series, the analytical solution of the displacement is given for the cylindrical shell with nonsimply supported edges at both ends under ice support. A finite element model for milling CSTWP under ice support is developed, which takes into account the nonlinear behavior of ice and the complex mechanical behavior of the ice/workpiece interface. Based on this finite element model and the corresponding milling experiments, the accuracy and validity of the established model are verified. The work provides a theoretical basis for the prediction of the deformation of CSTWP under ice support.
- 26 February 2024
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 146 (4) , 1-49
Force-Induced Deformation Mechanism for Cylindrical Shell Thin-Walled Parts Milling With Ice Supporting: Modeling and Prediction
Improving the rigidity of the process system in the cutting region of thin-walled parts is a challenging problem to ensure machining accuracy. For limited structural space, the use of ice support is an effective method. However, ice and workpiece constitute a completely new process system, which generates a complex process response under milling forces. Based on the Kirchhoff–Love thin-wall small-deformation assumption and the Winkler model for describing the inverse support of ice on cylindrical shell thin-walled parts (CSTWPs), a new prediction model is developed to predict the deflection of CSTWP under ice support. In the model, by introducing the displacement function in the form of annular triangular series, the analytical solution of the displacement is given for the cylindrical shell with nonsimply supported edges at both ends under ice support. A finite element model for milling CSTWP under ice support is developed, which takes into account the nonlinear behavior of ice and the complex mechanical behavior of the ice/workpiece interface. Based on this finite element model and the corresponding milling experiments, the accuracy and validity of the established model are verified. The work provides a theoretical basis for the prediction of the deformation of CSTWP under ice support.
- 29 October 2021
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 144 (6)
Effect of Indirect Cryogenic Cooling on the Machining Accuracy and Tool Vibration in the Turning of Polysulfone
Cutting deformation and cracks are common problems during the machining of precise polymer parts. This paper aims to explore the effects of different conditions on the contour profile of machined surfaces and tool vibration. Turning experiments of polysulfone (PSU) were performed under three conditions: dry, conventional flood cooling, and indirect cryogenic cooling. Then, the formation mechanism of machined surfaces' contour profile under different cutting conditions was clarified by the Eyring equation from the perspective of molecular chains relaxation time. Furthermore, extension models of crazing and cracks were proposed through the microscopic morphology of machined surfaces and the discriminant formula of crazing generation to explain the differences in tool vibration. The results indicated that the indirect cryogenic cooling condition with the internally cooled cutting tool could significantly improve the machinability of polysulfone, which has an excellent performance on the contour profile of machined surfaces with and the inhibition of crazing. Compared with dry and conventional flood cooling, indirect cryogenic cooling could reduce the mean of the Contour profile (Ra) by 40.3% and 30.1% and the machining accuracy error by 41% and 83%. The indirect cryogenic cooling method proposed in this work provides a reference for the cryogenic machining for polymers.
- 29 October 2021
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 144 (6)
Effect of Indirect Cryogenic Cooling on the Machining Accuracy and Tool Vibration in the Turning of Polysulfone
Cutting deformation and cracks are common problems during the machining of precise polymer parts. This paper aims to explore the effects of different conditions on the contour profile of machined surfaces and tool vibration. Turning experiments of polysulfone (PSU) were performed under three conditions: dry, conventional flood cooling, and indirect cryogenic cooling. Then, the formation mechanism of machined surfaces' contour profile under different cutting conditions was clarified by the Eyring equation from the perspective of molecular chains relaxation time. Furthermore, extension models of crazing and cracks were proposed through the microscopic morphology of machined surfaces and the discriminant formula of crazing generation to explain the differences in tool vibration. The results indicated that the indirect cryogenic cooling condition with the internally cooled cutting tool could significantly improve the machinability of polysulfone, which has an excellent performance on the contour profile of machined surfaces with and the inhibition of crazing. Compared with dry and conventional flood cooling, indirect cryogenic cooling could reduce the mean of the Contour profile (Ra) by 40.3% and 30.1% and the machining accuracy error by 41% and 83%. The indirect cryogenic cooling method proposed in this work provides a reference for the cryogenic machining for polymers.
- 8 June 2021
- Published by ASME International in Journal of Tribology
- Vol. 144 (3)
Theoretical Leakage Equations Towards Liquid-Phase Flow in the Straight-Through Labyrinth Seal
Labyrinth seals are widely applied in turbomachinery for gas and liquid sealing. A series of labyrinth seal leakage equations so far have been proposed for compressible gas and few equations for incompressible liquid. Based on the flow conserving governing equations, this paper originally presents semi-empirical analytic equations of the leakage flow rate and tooth-clearance pressure for liquid-phase flow in the straight-through labyrinth seal. The equations indicate that the leakage and pressure are closely related to the inlet pressure, outlet pressure, seal geometrical parameters, and four empirical coefficients, while no relation to the temperature and compressibility effects compared to the common gas equations. The empirical coefficients include the velocity compensation coefficient, friction coefficient, jet contraction coefficient, and resistance coefficient. Particularly, the velocity compensation coefficient is determined through an optimization by the genetic algorithm, while others are referred from previous research. Ultimately, taking the sealing of deeply subcooled liquid nitrogen within the spindle of the cryogenic cooling machine tool as a case, the accuracy of proposed equations is evaluated under various pressure ratios and geometry conditions using the numerical approach, whose numerical model has been validated by the experimental data in the literature. The results show that errors between calculation and simulation are generally within the limit of ±5%, except for the pressure values at the first two teeth. This work provides a theoretical basis for further studies on the liquid leakage equations in other labyrinth seal types.
- 8 June 2021
- Published by ASME International in Journal of Tribology
- Vol. 144 (3)
Theoretical Leakage Equations Towards Liquid-Phase Flow in the Straight-Through Labyrinth Seal
Labyrinth seals are widely applied in turbomachinery for gas and liquid sealing. A series of labyrinth seal leakage equations so far have been proposed for compressible gas and few equations for incompressible liquid. Based on the flow conserving governing equations, this paper originally presents semi-empirical analytic equations of the leakage flow rate and tooth-clearance pressure for liquid-phase flow in the straight-through labyrinth seal. The equations indicate that the leakage and pressure are closely related to the inlet pressure, outlet pressure, seal geometrical parameters, and four empirical coefficients, while no relation to the temperature and compressibility effects compared to the common gas equations. The empirical coefficients include the velocity compensation coefficient, friction coefficient, jet contraction coefficient, and resistance coefficient. Particularly, the velocity compensation coefficient is determined through an optimization by the genetic algorithm, while others are referred from previous research. Ultimately, taking the sealing of deeply subcooled liquid nitrogen within the spindle of the cryogenic cooling machine tool as a case, the accuracy of proposed equations is evaluated under various pressure ratios and geometry conditions using the numerical approach, whose numerical model has been validated by the experimental data in the literature. The results show that errors between calculation and simulation are generally within the limit of ±5%, except for the pressure values at the first two teeth. This work provides a theoretical basis for further studies on the liquid leakage equations in other labyrinth seal types.
- 17 December 2020
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 143 (5) , 1-35
Optimization of Jet Parameters for Minimizing Surface Roughness in Cryogenic Milling of Ti-6Al-4V
Cryogenic machining of titanium alloys using the internal cooling method is being identified as an alternative effective process to current practice of machining materials with poor thermal conductivity. The choice of jet parameters is particularly important for improving their machining quality and saving the production cost simultaneously. This research aimed to minimize the surface roughness by optimizing the comprehensive jet parameters in cryogenic milling Ti-6Al-4V. By comparing the cooling capability of liquid nitrogen and gaseous nitrogen, the influence mechanism of nitrogen phase on surface roughness was illuminated. A self-developed cryogenic machine tool with conveying liquid nitrogen through the spindle and tool was specially used to carry out milling experiments. The results indicated that the nitrogen phase had a most significant effect on surface roughness, followed by the pressure while the effect of flowrate was lowest. A lower volume fraction of gas, a higher pressure, and a proper flowrate could produce a lower surface roughness. An optimal combination of jet parameters was ultimately selected as the liquid nitrogen with 45 l/h of flowrate and 0.6 MPa of pressure to obtain the minimum surface roughness at 0.076 μm.
- 17 December 2020
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 143 (5) , 1-35
Optimization of Jet Parameters for Minimizing Surface Roughness in Cryogenic Milling of Ti-6Al-4V
Cryogenic machining of titanium alloys using the internal cooling method is being identified as an alternative effective process to current practice of machining materials with poor thermal conductivity. The choice of jet parameters is particularly important for improving their machining quality and saving the production cost simultaneously. This research aimed to minimize the surface roughness by optimizing the comprehensive jet parameters in cryogenic milling Ti-6Al-4V. By comparing the cooling capability of liquid nitrogen and gaseous nitrogen, the influence mechanism of nitrogen phase on surface roughness was illuminated. A self-developed cryogenic machine tool with conveying liquid nitrogen through the spindle and tool was specially used to carry out milling experiments. The results indicated that the nitrogen phase had a most significant effect on surface roughness, followed by the pressure while the effect of flowrate was lowest. A lower volume fraction of gas, a higher pressure, and a proper flowrate could produce a lower surface roughness. An optimal combination of jet parameters was ultimately selected as the liquid nitrogen with 45 l/h of flowrate and 0.6 MPa of pressure to obtain the minimum surface roughness at 0.076 μm.
- 24 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 17 (9) , 6023-6033
A New Multitask Learning Method for Tool Wear Condition and Part Surface Quality Prediction
Deep learning has been gradually used in the field of machining condition monitoring. However, at present only single-task prediction can be performed, which results in increased experimental costs, wasted datasets, and repetitive work. In this article, a new multitask learning method based on a deep belief network (DBN) is proposed, which can be used to predict the tool wear condition and part surface quality. The single-task data transmission of the last few hidden layers of the DBN network is improved to multitask parallel data transmission so that the improved DBN can realize multitask learning. The loss function of the multitask learning model is defined as the weighted sum of all single-task loss functions. According to the loss of different tasks in the iteration process, the weight of corresponding tasks can be adjusted automatically. Furthermore, the multitask deep learning method can realize information sharing, suppress overfitting, improve prediction accuracy, and require less computing time. Combined with the abovementioned improvements, a multitask model for tool wear and part surface quality was developed. Experimental verification was performed on a KVC850M three-axis vertical machining center. The results show that the accuracy of the proposed multitask prediction model is 99% for the tool wear prediction and 92.86% for part surface quality prediction.
- 24 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 17 (9) , 6023-6033
A New Multitask Learning Method for Tool Wear Condition and Part Surface Quality Prediction
Deep learning has been gradually used in the field of machining condition monitoring. However, at present only single-task prediction can be performed, which results in increased experimental costs, wasted datasets, and repetitive work. In this article, a new multitask learning method based on a deep belief network (DBN) is proposed, which can be used to predict the tool wear condition and part surface quality. The single-task data transmission of the last few hidden layers of the DBN network is improved to multitask parallel data transmission so that the improved DBN can realize multitask learning. The loss function of the multitask learning model is defined as the weighted sum of all single-task loss functions. According to the loss of different tasks in the iteration process, the weight of corresponding tasks can be adjusted automatically. Furthermore, the multitask deep learning method can realize information sharing, suppress overfitting, improve prediction accuracy, and require less computing time. Combined with the abovementioned improvements, a multitask model for tool wear and part surface quality was developed. Experimental verification was performed on a KVC850M three-axis vertical machining center. The results show that the accuracy of the proposed multitask prediction model is 99% for the tool wear prediction and 92.86% for part surface quality prediction.