Seunghwan Jo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Seunghwan Jo has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Jung Inn Sohn
Division of Physics and Semiconductor Science Dongguk University‐Seoul Seoul 04620 Korea
14 shared publications Jung Inn Sohn
Department of Physics Dongguk University Seoul 04620 Republic of Korea
11 shared publicationsKeon Beom Lee
Division of Physics and Semiconductor Science Dongguk University‐Seoul Seoul 04620 Republic of Korea
11 shared publicationsKi Hoon Shin
Department of Physics Dongguk University Seoul 04620 Republic of Korea
10 shared publicationsHyeonggeun Choi
Division of Physics and Semiconductor Science, Dongguk University-Seoul, Seoul 04620, Republic of Korea
7 shared publicationsJohn Hong
School of Materials Science and Engineering Kookmin University Seoul 02707 Republic of Korea
7 shared publications
Latest Publications
Stabilizing Lattice Oxygen Evolution with Oxophilic Ce and Active Ni Oxide Composite Electrocatalysts for Efficient Anion Exchange Membrane Water Electrolyzers
In transition metal oxide (TMO) based oxygen evolution reactions (OER) electrocatalysts, the lattice oxygen‐mediated mechanism (LOM) has emerged as a more efficient pathway for OER compared to the traditional adsorbate evolution mechanism (AEM). LOM activation critically depends on covalency of transition metals (TMs) with high‐valence states. In this study, we leverage the high electron affinity and strong oxophilicity of cerium (Ce) to fine‐tune the TM‐O bonding state of NiO through a one‐step electrodeposition method. Ce and Ni co‐electrodeposition forms a CeO 2 /NiO heterostructure that shifts from AEM to LOM via enhanced covalency between high‐ valence Ni and lattice oxygen and promotes electron transfer from NiO to CeO 2 . This CeO 2 /NiO heterostructure achieves a low overpotential of 160 mV and a Tafel slope of 32.68 mV dec ⁻1 at 10 mA cm ⁻2 . Additionally, it exhibits a low cell voltage of 1.84 V and only a 1.19% voltage increase over 100 h at a high current density of 1 A cm ⁻2 in an anion exchange membrane water electrolyzer. These results represent the role of oxophilic Ce and CeO 2 in stabilizing the Ni oxidation states, thereby ensuring superior LOM‐driven OER performance.
Stabilizing Lattice Oxygen Evolution with Oxophilic Ce and Active Ni Oxide Composite Electrocatalysts for Efficient Anion Exchange Membrane Water Electrolyzers
In transition metal oxide (TMO) based oxygen evolution reactions (OER) electrocatalysts, the lattice oxygen‐mediated mechanism (LOM) has emerged as a more efficient pathway for OER compared to the traditional adsorbate evolution mechanism (AEM). LOM activation critically depends on covalency of transition metals (TMs) with high‐valence states. In this study, we leverage the high electron affinity and strong oxophilicity of cerium (Ce) to fine‐tune the TM‐O bonding state of NiO through a one‐step electrodeposition method. Ce and Ni co‐electrodeposition forms a CeO 2 /NiO heterostructure that shifts from AEM to LOM via enhanced covalency between high‐ valence Ni and lattice oxygen and promotes electron transfer from NiO to CeO 2 . This CeO 2 /NiO heterostructure achieves a low overpotential of 160 mV and a Tafel slope of 32.68 mV dec ⁻1 at 10 mA cm ⁻2 . Additionally, it exhibits a low cell voltage of 1.84 V and only a 1.19% voltage increase over 100 h at a high current density of 1 A cm ⁻2 in an anion exchange membrane water electrolyzer. These results represent the role of oxophilic Ce and CeO 2 in stabilizing the Ni oxidation states, thereby ensuring superior LOM‐driven OER performance.
- 10 February 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (28)
A Hierarchically Designed Janus Polymer Electrolyte for High‐Performance Lithium‐Metal Batteries
Practical implementations of solid polymer electrolytes (SPEs) in solid‐state lithium‐metal batteries (SSLMBs) are inhibited by the limited lithium‐ion (Li+) transport and poor‐quality interface between SPEs and both electrodes. SPEs exhibit lower ionic conductivity than other electrolytes and are oxidized and decomposed by oxide‐based cathode materials in high‐voltage windows. SSLMBs are also long‐term destabilized by parasitic side reactions at the electrode–electrolyte interfaces and Li dendrite formations. This study proposes a selectively designed Janus‐structured polymer electrolyte (JPE), which is more physically and chemically compatible with the electrodes than other SPEs. The proposed JPE includes a cathode‐facing composite polymer electrolyte (C‐CPE) containing succinonitrile and Li7La3Zr2O12, and an anode‐facing composite polymer electrolyte (A‐CPE) incorporating fluoroethylene carbonate (FEC). The C‐CPE layer provides additional Li+ paths and increases the antioxidant properties, improving the high‐voltage tolerance of the SSLMB, while the A‐CPE layer alleviates side reactions with the Li metal anode and improves the stability against protruding dendrites. Full cells of Li|JPE|Ni0.8Co0.15Al0.05O2 and Li|JPE|LiCoO2 remain stable over 1600 cycles at 1 C, demonstrating the potential of the JPE structures for SSLMBs. Moreover, symmetric Li||Li cells assembled with the JPE cycle over 2500 h at 0.1 mA cm−2 and 1000 h at 0.5 mA cm−2.
- 10 February 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (28)
A Hierarchically Designed Janus Polymer Electrolyte for High‐Performance Lithium‐Metal Batteries
Practical implementations of solid polymer electrolytes (SPEs) in solid‐state lithium‐metal batteries (SSLMBs) are inhibited by the limited lithium‐ion (Li+) transport and poor‐quality interface between SPEs and both electrodes. SPEs exhibit lower ionic conductivity than other electrolytes and are oxidized and decomposed by oxide‐based cathode materials in high‐voltage windows. SSLMBs are also long‐term destabilized by parasitic side reactions at the electrode–electrolyte interfaces and Li dendrite formations. This study proposes a selectively designed Janus‐structured polymer electrolyte (JPE), which is more physically and chemically compatible with the electrodes than other SPEs. The proposed JPE includes a cathode‐facing composite polymer electrolyte (C‐CPE) containing succinonitrile and Li7La3Zr2O12, and an anode‐facing composite polymer electrolyte (A‐CPE) incorporating fluoroethylene carbonate (FEC). The C‐CPE layer provides additional Li+ paths and increases the antioxidant properties, improving the high‐voltage tolerance of the SSLMB, while the A‐CPE layer alleviates side reactions with the Li metal anode and improves the stability against protruding dendrites. Full cells of Li|JPE|Ni0.8Co0.15Al0.05O2 and Li|JPE|LiCoO2 remain stable over 1600 cycles at 1 C, demonstrating the potential of the JPE structures for SSLMBs. Moreover, symmetric Li||Li cells assembled with the JPE cycle over 2500 h at 0.1 mA cm−2 and 1000 h at 0.5 mA cm−2.
High‐Entropy Oxychalcogenide for Hydrogen Spillover Enhanced Hydrogen Evolution Reaction in Proton and Anion Exchange Membrane Water Electrolyzers
The hydrogen spillover phenomenon provides an expeditious reaction pathway via hydrogen transfer from a strong H adsorption site to a weak H adsorption site, enabling a cost‐efficient hydrogen evolution reaction (HER) analogous to platinum with moderate H adsorption energy. Here, a high‐entropy oxychalcogenide (HEOC) comprising Co, Ni, Mo, W, O, Se, and Te is prepared by a two‐step electrochemical deposition for hydrogen spillover‐enhanced HER in acidic and alkaline water electrolysis. The anodic–cathodic reversal current enables the co‐deposition of cations and aliovalent anions, facilitating a glass structure with multiple active sites for hydrogen spillover. The HEOC exhibits low overpotentials of 52 and 57 mV to obtain a current density of 10 mA cm −2 in acidic and alkaline media, respectively, and long‐term stability for 500 h. The electrochemical and analytical approaches elucidate the hydrogen transfer toward Mo/W−O sites in both acid and alkaline HERs. Meanwhile, the other sites act as hydrogen adsorption or water dissociation‐derived hydroxide adsorption sites, showing accommodable behavior in acidic and alkaline media. The HEOC exhibits a practically high current of 1 A cm −2 at cell voltages of 1.78 and 1.89 V and long‐term stability for 100 h in proton and anion exchange membrane water electrolyzers, respectively.
High‐Entropy Oxychalcogenide for Hydrogen Spillover Enhanced Hydrogen Evolution Reaction in Proton and Anion Exchange Membrane Water Electrolyzers
The hydrogen spillover phenomenon provides an expeditious reaction pathway via hydrogen transfer from a strong H adsorption site to a weak H adsorption site, enabling a cost‐efficient hydrogen evolution reaction (HER) analogous to platinum with moderate H adsorption energy. Here, a high‐entropy oxychalcogenide (HEOC) comprising Co, Ni, Mo, W, O, Se, and Te is prepared by a two‐step electrochemical deposition for hydrogen spillover‐enhanced HER in acidic and alkaline water electrolysis. The anodic–cathodic reversal current enables the co‐deposition of cations and aliovalent anions, facilitating a glass structure with multiple active sites for hydrogen spillover. The HEOC exhibits low overpotentials of 52 and 57 mV to obtain a current density of 10 mA cm −2 in acidic and alkaline media, respectively, and long‐term stability for 500 h. The electrochemical and analytical approaches elucidate the hydrogen transfer toward Mo/W−O sites in both acid and alkaline HERs. Meanwhile, the other sites act as hydrogen adsorption or water dissociation‐derived hydroxide adsorption sites, showing accommodable behavior in acidic and alkaline media. The HEOC exhibits a practically high current of 1 A cm −2 at cell voltages of 1.78 and 1.89 V and long‐term stability for 100 h in proton and anion exchange membrane water electrolyzers, respectively.
- Open Access
- 15 January 2025
- Published by Wiley in Energy & Environmental Materials
- Vol. 8 (4)
Novel Anchored Branched Polymer Coating Layers for Enhanced Redox Kinetics in Aqueous Zinc‐Ion Batteries
The fundamental issues associated with Zn anodes prevent the commercialization of aqueous Zn ion batteries. To address this, a simple dip‐coating method was used to coordinate a thin layer of branched polyethyleneimine (b‐PEI) polymer onto the electrode surface. This process increases hydrophilicity and reduces interfacial resistance between the electrode and aqueous electrolyte. Consequently, electrolyte leaching from the hydrophilic polymer coating layer is prevented, charge distribution is uniform, and stable electrochemical performance is maintained over extended periods. In symmetric cell testing, the b‐PEI@Zn anode exhibits a lifespan of over 1400 h (3 mA cm−2, 1 mAh cm−2). Furthermore, full‐cell tests, the b‐PEI@Zn anode demonstrates higher capacity (+26.05%) and improved stability (95.4%) compared to the bare Zn anode (0.5 A g−1). This study presents a practical surface modification strategy for Zn anodes and underscores the potential of innovative polymer‐based electrode coatings for aqueous battery applications.
- 15 January 2025
- Published by Wiley in Energy & Environmental Materials
- Vol. 8 (4)
Open AccessNovel Anchored Branched Polymer Coating Layers for Enhanced Redox Kinetics in Aqueous Zinc‐Ion Batteries
The fundamental issues associated with Zn anodes prevent the commercialization of aqueous Zn ion batteries. To address this, a simple dip‐coating method was used to coordinate a thin layer of branched polyethyleneimine (b‐PEI) polymer onto the electrode surface. This process increases hydrophilicity and reduces interfacial resistance between the electrode and aqueous electrolyte. Consequently, electrolyte leaching from the hydrophilic polymer coating layer is prevented, charge distribution is uniform, and stable electrochemical performance is maintained over extended periods. In symmetric cell testing, the b‐PEI@Zn anode exhibits a lifespan of over 1400 h (3 mA cm−2, 1 mAh cm−2). Furthermore, full‐cell tests, the b‐PEI@Zn anode demonstrates higher capacity (+26.05%) and improved stability (95.4%) compared to the bare Zn anode (0.5 A g−1). This study presents a practical surface modification strategy for Zn anodes and underscores the potential of innovative polymer‐based electrode coatings for aqueous battery applications.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (24) , 4931
High Entropy Stabilized Porous Metallic Glass Nanosheet for Proton Exchange Membrane Water Electrolysis
Acid-stable oxygen evolution electrocatalyst is paramount for practical proton exchange membrane water electrolysis. Owing to the sluggish diffusion kinetics, the nonprecious high entropy materials that comprise more than five principle elements are considered promising candidates to alternate the noble metals by overcoming oxidative elution in acidic media. Herein, nonprecious high entropy material consisting of Co, Fe, Ni, Mo, and W has been prepared by electrochemical deposition and following Te-mediated glassification for acidic oxygen evolution electrocatalyst. The hybrid approach of electrochemical deposition combined with glassification enables porous nanosheet morphology with expanded surface area and increased valence states of metal cations, outperforming the non-glassified high entropy material (CoFeNiMoW). The glassified CoFeNiMoWTe exhibits a lower cell voltage of 1.81 mV than the CoFeNiMoW (1.87 V) and a low voltage increase of 30 mV for 100 h at the current density of 1 A cm-2 in the proton exchange membrane water electrolyzer.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (24) , 4931
High Entropy Stabilized Porous Metallic Glass Nanosheet for Proton Exchange Membrane Water Electrolysis
Acid-stable oxygen evolution electrocatalyst is paramount for practical proton exchange membrane water electrolysis. Owing to the sluggish diffusion kinetics, the nonprecious high entropy materials that comprise more than five principle elements are considered promising candidates to alternate the noble metals by overcoming oxidative elution in acidic media. Herein, nonprecious high entropy material consisting of Co, Fe, Ni, Mo, and W has been prepared by electrochemical deposition and following Te-mediated glassification for acidic oxygen evolution electrocatalyst. The hybrid approach of electrochemical deposition combined with glassification enables porous nanosheet morphology with expanded surface area and increased valence states of metal cations, outperforming the non-glassified high entropy material (CoFeNiMoW). The glassified CoFeNiMoWTe exhibits a lower cell voltage of 1.81 mV than the CoFeNiMoW (1.87 V) and a low voltage increase of 30 mV for 100 h at the current density of 1 A cm-2 in the proton exchange membrane water electrolyzer.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (24) , 4918
Lattice Oxygen-Catalyzed Bismuth-Cerium Oxyhydroxide Anode for Anion Exchange Membrane Water Electrolyzers
The lattice oxygen involvement in the oxygen evolution reaction provides an efficient reaction pathway. However, the structural and electrochemical stabilities are crucial to activate lattice oxygen while minimizing material deformations and ion elution. Herein, a heterostructure Bi/BiCeOOH containing abundant under-coordinated oxygen atoms is prepared by an electrochemical deposition method. The reduction potential difference between Bi and Ce generates partially reduced Bi nanoparticles and surrounding under-coordinated oxygen atoms in BiCeOOH. The lattice oxygen is activated and stabilized when the metal–oxygen covalency increases, and the oxophilic Ce maintains the Bi nanoparticles with surrounding under-coordinated oxygen atoms by preventing over-oxidation of Bi during the oxygen evolution reaction. Bi/BiCeOOH-based anion exchange membrane water electrolyzer exhibits a low cell voltage of 1.79 V and long-term stability with only a 2.2% voltage increase for 100 h at a high practical current density of 1.0 A cm−2.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (24) , 4918
Lattice Oxygen-Catalyzed Bismuth-Cerium Oxyhydroxide Anode for Anion Exchange Membrane Water Electrolyzers
The lattice oxygen involvement in the oxygen evolution reaction provides an efficient reaction pathway. However, the structural and electrochemical stabilities are crucial to activate lattice oxygen while minimizing material deformations and ion elution. Herein, a heterostructure Bi/BiCeOOH containing abundant under-coordinated oxygen atoms is prepared by an electrochemical deposition method. The reduction potential difference between Bi and Ce generates partially reduced Bi nanoparticles and surrounding under-coordinated oxygen atoms in BiCeOOH. The lattice oxygen is activated and stabilized when the metal–oxygen covalency increases, and the oxophilic Ce maintains the Bi nanoparticles with surrounding under-coordinated oxygen atoms by preventing over-oxidation of Bi during the oxygen evolution reaction. Bi/BiCeOOH-based anion exchange membrane water electrolyzer exhibits a low cell voltage of 1.79 V and long-term stability with only a 2.2% voltage increase for 100 h at a high practical current density of 1.0 A cm−2.
- 29 October 2024
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 11 (24) , 8789-8796
A highly active and durable NiMoCuCo catalyst with moderated hydroxide adsorption energy for efficient hydrogen evolution reaction
A charge valence state and surface-electronegativity-modulated NiMoCuCo composite is proposed as an active and durable alkaline hydrogen evolution reaction electrocatalyst with moderated hydroxide adsorption energy.
- 29 October 2024
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 11 (24) , 8789-8796
A highly active and durable NiMoCuCo catalyst with moderated hydroxide adsorption energy for efficient hydrogen evolution reaction
A charge valence state and surface-electronegativity-modulated NiMoCuCo composite is proposed as an active and durable alkaline hydrogen evolution reaction electrocatalyst with moderated hydroxide adsorption energy.
- 8 April 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (27) , e2314211
Stabilization of Lattice Oxygen Evolution Reactions in Oxophilic Ce‐Mediated Bi/BiCeO1.8H Electrocatalysts for Efficient Anion Exchange Membrane Water Electrolyzers
The lattice oxygen mechanism (LOM) offers an efficient reaction pathway for oxygen evolution reactions (OERs) in energy storage and conversion systems. Owing to the involvement of active lattice oxygen enhancing electrochemical activity, addressing the structural and electrochemical stabilities of LOM materials is crucial. Herein, a heterostructure (Bi/BiCeO1.8H) containing abundant under‐coordinated oxygen atoms having oxygen nonbonding states is synthesized by a simple electrochemical deposition method. Given the difference in reduction potentials between Bi and Ce, partially reduced Bi nanoparticles and surrounding under‐coordinated oxygen atoms are generated in BiCeO1.8H. It is found that the lattice oxygen can be activated as a reactant of the OER when the valence state of Bi increases to Bi5+, leading to increased metal–oxygen covalency and that the oxophilic Ce3+/4+ redox couple can maintain the Bi nanoparticles and surrounding under‐coordinated oxygen atoms by preventing over‐oxidation of Bi. The anion exchange membrane water electrolyzer with Bi/BiCeO1.8H exhibits a low cell voltage of 1.79 V even at a high practical current density of 1.0 A cm−2. Furthermore, the cell performance remains significantly stable over 100 h with only a 2.2% increase in the initial cell voltage, demonstrating sustainable lattice oxygen redox.
- 8 April 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (27) , e2314211
Stabilization of Lattice Oxygen Evolution Reactions in Oxophilic Ce‐Mediated Bi/BiCeO1.8H Electrocatalysts for Efficient Anion Exchange Membrane Water Electrolyzers
The lattice oxygen mechanism (LOM) offers an efficient reaction pathway for oxygen evolution reactions (OERs) in energy storage and conversion systems. Owing to the involvement of active lattice oxygen enhancing electrochemical activity, addressing the structural and electrochemical stabilities of LOM materials is crucial. Herein, a heterostructure (Bi/BiCeO1.8H) containing abundant under‐coordinated oxygen atoms having oxygen nonbonding states is synthesized by a simple electrochemical deposition method. Given the difference in reduction potentials between Bi and Ce, partially reduced Bi nanoparticles and surrounding under‐coordinated oxygen atoms are generated in BiCeO1.8H. It is found that the lattice oxygen can be activated as a reactant of the OER when the valence state of Bi increases to Bi5+, leading to increased metal–oxygen covalency and that the oxophilic Ce3+/4+ redox couple can maintain the Bi nanoparticles and surrounding under‐coordinated oxygen atoms by preventing over‐oxidation of Bi. The anion exchange membrane water electrolyzer with Bi/BiCeO1.8H exhibits a low cell voltage of 1.79 V even at a high practical current density of 1.0 A cm−2. Furthermore, the cell performance remains significantly stable over 100 h with only a 2.2% increase in the initial cell voltage, demonstrating sustainable lattice oxygen redox.