António André Chivanga Barros
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
António André Chivanga Barros has a total of 128 co-authors. Here are the top co-authors by number of shared publications:
- Henry França Meier
Regional University of Blumenau, Brazil
9 shared publications - Vinicyus Rodolfo Wiggers
Department of Chemical Engineering, University of Blumenau (FURB), Blumenau 89030 000, Brazil
7 shared publications - Dirceu Noriler
School of Chemical Engineering, Unicamp, Campinas, SP, Brazil
5 shared publications - Alberto Wisniewski
Petroleum and Energy from Biomass Research Group (PEB), Department of Chemistry, Federal University of Sergipe, Jardim Rosa Elze, São Cristóvão, SE 49107-230, Brazil
3 shared publications - Cíntia Soares
Federal University of Santa Catarina (UFSC)
3 shared publications - Feliciano José Ricardo Cangue
TotalEnergies, Surface and Coatings Technology, Luanda, Angola
3 shared publications
Latest Publications
- Open Access
- 10 July 2026
- Published by Elsevier in SSRN Electronic Journal
Assessment of Hydrocarbon Contamination in Angolan Coastal Soils: Diagnosis, Spatial Distribution, and Environmental Implications
Angola, one of the leading oil-producing countries in Sub-Saharan Africa, faces significant environmental challenges associated with decades of hydrocarbon exploration and production along its coastline. Coastal soils in the provinces of Cabinda, Zaire, Bengo, Luanda, Kuanza Sul, Benguela, and Namibe are exposed to contamination by total petroleum hydrocarbons (TPHs), including polycyclic aromatic hydrocarbons (PAHs) and BTEX compounds (benzene, toluene, ethylbenzene, and xylenes), which pose risks to ecosystems and human health due to their persistence, mobility, and toxicity. This study presents a critical assessment of hydrocarbon contamination in Angolan coastal soils, focusing on contaminant distribution, environmental impacts, and associated risks. The methodological approach combined a systematic literature review with soil sampling, laboratory characterization, hydrogeological analysis, and geospatial assessment. Analytical techniques included gas chromatography with flame ionization detection (GC–FID), gas chromatography–mass spectrometry (GC–MS), X-ray fluorescence (XRF), X-ray diffraction (XRD), and measurements of pH, electrical conductivity, and total dissolved solids. Spatial analysis was conducted using ArcGIS Pro and Google Earth. The results revealed severe contamination, with TPH concentrations frequently exceeding 50,000 mg kg⁻¹ near oil production and transportation facilities, far above international guideline values. BTEX compounds, particularly benzene, were identified as the dominant contaminants. High mobility of volatile hydrocarbon fractions in sandy soils increased the risk of contaminant migration and groundwater pollution. Elevated concentrations of nickel, vanadium, lead, and arsenic were also detected, indicating additional contamination sources associated with petroleum activities. Contaminant distribution was strongly influenced by local hydrogeological and geomorphological conditions, while alterations in soil physicochemical properties confirmed the environmental impact of hydrocarbon pollution. An integrated remediation framework combining environmental monitoring, phytoremediation, and assisted bioremediation is proposed to support the restoration and sustainable management of contaminated coastal ecosystems in Angola.
- 10 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAssessment of Hydrocarbon Contamination in Angolan Coastal Soils: Diagnosis, Spatial Distribution, and Environmental Implications
Angola, one of the leading oil-producing countries in Sub-Saharan Africa, faces significant environmental challenges associated with decades of hydrocarbon exploration and production along its coastline. Coastal soils in the provinces of Cabinda, Zaire, Bengo, Luanda, Kuanza Sul, Benguela, and Namibe are exposed to contamination by total petroleum hydrocarbons (TPHs), including polycyclic aromatic hydrocarbons (PAHs) and BTEX compounds (benzene, toluene, ethylbenzene, and xylenes), which pose risks to ecosystems and human health due to their persistence, mobility, and toxicity. This study presents a critical assessment of hydrocarbon contamination in Angolan coastal soils, focusing on contaminant distribution, environmental impacts, and associated risks. The methodological approach combined a systematic literature review with soil sampling, laboratory characterization, hydrogeological analysis, and geospatial assessment. Analytical techniques included gas chromatography with flame ionization detection (GC–FID), gas chromatography–mass spectrometry (GC–MS), X-ray fluorescence (XRF), X-ray diffraction (XRD), and measurements of pH, electrical conductivity, and total dissolved solids. Spatial analysis was conducted using ArcGIS Pro and Google Earth. The results revealed severe contamination, with TPH concentrations frequently exceeding 50,000 mg kg⁻¹ near oil production and transportation facilities, far above international guideline values. BTEX compounds, particularly benzene, were identified as the dominant contaminants. High mobility of volatile hydrocarbon fractions in sandy soils increased the risk of contaminant migration and groundwater pollution. Elevated concentrations of nickel, vanadium, lead, and arsenic were also detected, indicating additional contamination sources associated with petroleum activities. Contaminant distribution was strongly influenced by local hydrogeological and geomorphological conditions, while alterations in soil physicochemical properties confirmed the environmental impact of hydrocarbon pollution. An integrated remediation framework combining environmental monitoring, phytoremediation, and assisted bioremediation is proposed to support the restoration and sustainable management of contaminated coastal ecosystems in Angola.
- Open Access
- 30 June 2026
- Published by Elsevier in SSRN Electronic Journal
Kinetic Analysis of Microalgae Cultivation for the Optimization of Biofuel Production Processes
Biofuel production through CO₂ biofixation by microalgae presents high potential due to the simultaneous generation of biomass and lipids. In this study, cultures of Chlorella sp. were carried out in Erlenmeyer flasks (500 mL) and photobioreactors (1.5 L and 2.0 L), and morphological, kinetic, productivity, and CO₂ removal parameters were evaluated. Cells were spherical and green, with an average diameter of 7.5 µm. The spectrophotometric method used for biomass quantification showed high precision (R² > 0.99). In Erlenmeyer cultures, µmax of 0.25 day⁻¹, doubling time of 3 days, Cmax of 2.78 g/L, and CO₂ removal of 14.9 mg were obtained. In photobioreactors, results were superior: Cmax between 8.49 and 10.80 g/L, maximum productivity up to 1.47 g·L⁻¹·day⁻¹, and removal of up to 25 g of CO₂ per cycle. Lipid content ranged from 21.4% to 35.7%, increasing as cell density increased. Overall, Chlorella sp. demonstrated consistent growth, with µmax between 0.084 and 0.25 day⁻¹, doubling times of 3–8 days, Cmax of 2.78–10.80 g/L, CO₂ removal from 14.9 mg to 25 g per cycle and maximum lipid yield of 35.7%. Results confirm the species' potential as a biotechnological platform for CO₂ biofixation and sustainable biofuel production.
- 30 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessKinetic Analysis of Microalgae Cultivation for the Optimization of Biofuel Production Processes
Biofuel production through CO₂ biofixation by microalgae presents high potential due to the simultaneous generation of biomass and lipids. In this study, cultures of Chlorella sp. were carried out in Erlenmeyer flasks (500 mL) and photobioreactors (1.5 L and 2.0 L), and morphological, kinetic, productivity, and CO₂ removal parameters were evaluated. Cells were spherical and green, with an average diameter of 7.5 µm. The spectrophotometric method used for biomass quantification showed high precision (R² > 0.99). In Erlenmeyer cultures, µmax of 0.25 day⁻¹, doubling time of 3 days, Cmax of 2.78 g/L, and CO₂ removal of 14.9 mg were obtained. In photobioreactors, results were superior: Cmax between 8.49 and 10.80 g/L, maximum productivity up to 1.47 g·L⁻¹·day⁻¹, and removal of up to 25 g of CO₂ per cycle. Lipid content ranged from 21.4% to 35.7%, increasing as cell density increased. Overall, Chlorella sp. demonstrated consistent growth, with µmax between 0.084 and 0.25 day⁻¹, doubling times of 3–8 days, Cmax of 2.78–10.80 g/L, CO₂ removal from 14.9 mg to 25 g per cycle and maximum lipid yield of 35.7%. Results confirm the species' potential as a biotechnological platform for CO₂ biofixation and sustainable biofuel production.
- 7 January 2026
- Published by Brazilian Journals in STUDIES IN ENGINEERING AND EXACT SCIENCES
- Vol. 7 (1) , e23155
Green hydrogen in Angola: a strategic platform for industrialisation and economic sovereignty
The global energy transition has profoundly reshaped the world’s geoeconomic landscape, driven by climate regulation, geopolitical pressures, and increasing industrial competitiveness requirements. Green hydrogen is emerging as a central energy vector, with the potential to account for up to 22 percent of final global energy consumption by 2050. Angola is in a unique strategic position to harness this transformation, due to its abundant low-cost renewable energy potential, critical mineral resources, Atlantic location, and the opportunity to develop a new industrial base. This article analyses the structural role of green hydrogen in Angola’s industrialisation, examines the country’s competitive factors, describes priority projects currently under development, and discusses the expected economic impacts. Based on the literature review and strategic assessment, green hydrogen can become the core of a modern industrial policy capable of driving economic growth, strengthening value chains, creating skilled jobs, and consolidating national economic sovereignty. It can thus be concluded that Angola possesses the objective conditions to establish itself as an African and Atlantic leader in the energy transition, provided a robust regulatory framework and targeted industrial policies are implemented swiftly.
- 7 January 2026
- Published by Brazilian Journals in STUDIES IN ENGINEERING AND EXACT SCIENCES
- Vol. 7 (1) , e23155
Green hydrogen in Angola: a strategic platform for industrialisation and economic sovereignty
The global energy transition has profoundly reshaped the world’s geoeconomic landscape, driven by climate regulation, geopolitical pressures, and increasing industrial competitiveness requirements. Green hydrogen is emerging as a central energy vector, with the potential to account for up to 22 percent of final global energy consumption by 2050. Angola is in a unique strategic position to harness this transformation, due to its abundant low-cost renewable energy potential, critical mineral resources, Atlantic location, and the opportunity to develop a new industrial base. This article analyses the structural role of green hydrogen in Angola’s industrialisation, examines the country’s competitive factors, describes priority projects currently under development, and discusses the expected economic impacts. Based on the literature review and strategic assessment, green hydrogen can become the core of a modern industrial policy capable of driving economic growth, strengthening value chains, creating skilled jobs, and consolidating national economic sovereignty. It can thus be concluded that Angola possesses the objective conditions to establish itself as an African and Atlantic leader in the energy transition, provided a robust regulatory framework and targeted industrial policies are implemented swiftly.
- 19 November 2025
- Published by Springer Nature in Brazilian Journal of Chemical Engineering
- Vol. 43 (3) , 1-18
Analysis of biodiesel production process using circular economy principles: a review
- 19 November 2025
- Published by Springer Nature in Brazilian Journal of Chemical Engineering
- Vol. 43 (3) , 1-18
Analysis of biodiesel production process using circular economy principles: a review
- Open Access
- 29 September 2025
- Published by Lepidus Tecnologia in Brazilian Journal of Science
- Vol. 4 (10) , 51-60
Analysis of flow characteristics in circular pipes
Determining the fluid flow regime is critical for optimizing oil production processes. To address this need, we evaluated a method for characterizing flow by calculating the Reynolds number. Experiments were conducted using a closed-loop piping system equipped with a flow meter and a visualization chamber. The flow rate was systematically increased, and all tests were performed in triplicate to ensure accuracy and reliability. The results showed that the experimental setup effectively distinguished laminar, transitional, and turbulent flows in both single-phase and multiphase systems, with transitions visually confirmed by observing streamlines. This study presents a validated and practical approach for accurately determining flow regimes, offering direct benefits for the design and operation of industrial flow systems.
- 29 September 2025
- Published by Lepidus Tecnologia in Brazilian Journal of Science
- Vol. 4 (10) , 51-60
Open AccessAnalysis of flow characteristics in circular pipes
Determining the fluid flow regime is critical for optimizing oil production processes. To address this need, we evaluated a method for characterizing flow by calculating the Reynolds number. Experiments were conducted using a closed-loop piping system equipped with a flow meter and a visualization chamber. The flow rate was systematically increased, and all tests were performed in triplicate to ensure accuracy and reliability. The results showed that the experimental setup effectively distinguished laminar, transitional, and turbulent flows in both single-phase and multiphase systems, with transitions visually confirmed by observing streamlines. This study presents a validated and practical approach for accurately determining flow regimes, offering direct benefits for the design and operation of industrial flow systems.
- Open Access
- 2 July 2025
- Published by Brazilian Journals in STUDIES IN MULTIDISCIPLINARY REVIEW
- Vol. 6 (2) , e20543
Assessment of the quality and safety of fast food sold on the streets of the Benfica Urban District, Angola
Food is a fundamental necessity for any society, as it directly influences the population's quality of life and is associated with the maintenance, prevention, and recovery of health. This study aims to assess the microbiological quality and safety of the main fast foods sold in public areas of the Urban District of Benfica. To achieve this, an initial survey was conducted with 50 food handlers, and samples of hamburgers, cabrité, and magoga—identified as the primary street-vended fast foods—were collected and subjected to microbiological analyses to determine the levels of Total Coliforms, Fecal Coliforms, E. coli, and Salmonella, under the Angolan standard NA 31:2013 – Microbiological Standards for Food, Sanitary Requirements. The data obtained showed that 85% of food handlers failed to comply with critical food processing parameters, including the use of gloves and masks, possession of a health certificate, knowledge of cross-contamination, periodic medical examinations, and the simultaneous handling of food and money. The results of microbiological analyses indicated that, regarding Total Coliform levels, sample H01 presented 7.0×10⁴ CFU/g, sample M03 had 250 CFU/g, and sample C02 showed no microbial growth. Regarding Fecal Coliform levels, sample M03 had 240 CFU/g, while samples H01 and C02 exhibited no microbial growth. The analysis conducted to identify E. coli and Salmonella demonstrated the absence of these microorganisms in all samples.
- 2 July 2025
- Published by Brazilian Journals in STUDIES IN MULTIDISCIPLINARY REVIEW
- Vol. 6 (2) , e20543
Open AccessAssessment of the quality and safety of fast food sold on the streets of the Benfica Urban District, Angola
Food is a fundamental necessity for any society, as it directly influences the population's quality of life and is associated with the maintenance, prevention, and recovery of health. This study aims to assess the microbiological quality and safety of the main fast foods sold in public areas of the Urban District of Benfica. To achieve this, an initial survey was conducted with 50 food handlers, and samples of hamburgers, cabrité, and magoga—identified as the primary street-vended fast foods—were collected and subjected to microbiological analyses to determine the levels of Total Coliforms, Fecal Coliforms, E. coli, and Salmonella, under the Angolan standard NA 31:2013 – Microbiological Standards for Food, Sanitary Requirements. The data obtained showed that 85% of food handlers failed to comply with critical food processing parameters, including the use of gloves and masks, possession of a health certificate, knowledge of cross-contamination, periodic medical examinations, and the simultaneous handling of food and money. The results of microbiological analyses indicated that, regarding Total Coliform levels, sample H01 presented 7.0×10⁴ CFU/g, sample M03 had 250 CFU/g, and sample C02 showed no microbial growth. Regarding Fecal Coliform levels, sample M03 had 240 CFU/g, while samples H01 and C02 exhibited no microbial growth. The analysis conducted to identify E. coli and Salmonella demonstrated the absence of these microorganisms in all samples.
- Open Access
- 2 July 2025
- Published by Brazilian Journals in STUDIES IN MULTIDISCIPLINARY REVIEW
- Vol. 6 (2) , e20544
Telephone recharge card lifecycle management
The use of the Odoo platform for the study of Product Lifecycle Management (PLM) provides a detailed overview of the stages involved. The analysis of the life cycle of UNITEL's prepaid cards encompasses the various stages the product undergoes in the market, the duration of which varies according to factors related to innovation, demand, and competitiveness. The product is introduced to the market with investments aimed at promoting consumer awareness. As acceptance grows, the product enters a growth phase, gaining greater market share and increasing profitability. Upon reaching maturity, the product experiences sales stability, with the consolidation of standardization. With technological advancements and shifts in consumer behavior, the decline phase begins, marked by a reduction in demand. Customer segmentation is a critical factor in defining the target audience and maximizing the company’s profitability, supported by more effective marketing and distribution strategies. The use of the Odoo tool enables the identification of operational bottlenecks and optimization opportunities within the lifecycle of UNITEL cards, factors that contribute to process efficiency and the reduction of environmental impacts. The analysis of the lifecycle of UNITEL's prepaid cards, combined with technological support, enables an understanding of the factors influencing market retention and facilitates the development of more sustainable and efficient management strategies. The digitization of recharges serves as an alternative to reduce the reliance on physical recharges, owing to its convenience and speed, even when considering the challenges posed by the lack of telecommunications infrastructure.
- 2 July 2025
- Published by Brazilian Journals in STUDIES IN MULTIDISCIPLINARY REVIEW
- Vol. 6 (2) , e20544
Open AccessTelephone recharge card lifecycle management
The use of the Odoo platform for the study of Product Lifecycle Management (PLM) provides a detailed overview of the stages involved. The analysis of the life cycle of UNITEL's prepaid cards encompasses the various stages the product undergoes in the market, the duration of which varies according to factors related to innovation, demand, and competitiveness. The product is introduced to the market with investments aimed at promoting consumer awareness. As acceptance grows, the product enters a growth phase, gaining greater market share and increasing profitability. Upon reaching maturity, the product experiences sales stability, with the consolidation of standardization. With technological advancements and shifts in consumer behavior, the decline phase begins, marked by a reduction in demand. Customer segmentation is a critical factor in defining the target audience and maximizing the company’s profitability, supported by more effective marketing and distribution strategies. The use of the Odoo tool enables the identification of operational bottlenecks and optimization opportunities within the lifecycle of UNITEL cards, factors that contribute to process efficiency and the reduction of environmental impacts. The analysis of the lifecycle of UNITEL's prepaid cards, combined with technological support, enables an understanding of the factors influencing market retention and facilitates the development of more sustainable and efficient management strategies. The digitization of recharges serves as an alternative to reduce the reliance on physical recharges, owing to its convenience and speed, even when considering the challenges posed by the lack of telecommunications infrastructure.
- Open Access
- 1 June 2025
- Published by Lepidus Tecnologia in Brazilian Journal of Science
- Vol. 4 (6) , 11-30
Using blockchain technology for transparency in mining: a strategy to reduce corruption and increase accountability
The application of blockchain technology and the implementation of synthetic diamond production represent innovative strategies to transform the mineral resources sector in Angola, with a specific focus on the province of Lunda Sul, where the Catoca mine is located. Blockchain technology aims to improve the governance model and promote greater transparency and traceability in mining operations, a factor that contributes to the mitigation of corrupt practices and the strengthening of corporate responsibility. In addition, the production of synthetic diamonds emerges as a sustainable alternative, capable of reducing the environmental impact associated with traditional mining, and at the same time increasing the competitiveness of the sector in the global market. To support this work, an exploratory and explanatory methodology was adopted, including interviews with key stakeholders, such as two mining companies and the Department of Mines at the Faculty of Engineering of Agostinho Neto University. The referenced interviews enabled a detailed analysis of the current challenges of the sector and the opportunities related to the integration of disruptive technologies, such as blockchain technology, and sustainable practices, such as diamond synthesis. Therefore, the combination of such approaches can transform the Angolan mineral sector, aligning it with contemporary demands for transparency, sustainability, and operational efficiency.
- 1 June 2025
- Published by Lepidus Tecnologia in Brazilian Journal of Science
- Vol. 4 (6) , 11-30
Open AccessUsing blockchain technology for transparency in mining: a strategy to reduce corruption and increase accountability
The application of blockchain technology and the implementation of synthetic diamond production represent innovative strategies to transform the mineral resources sector in Angola, with a specific focus on the province of Lunda Sul, where the Catoca mine is located. Blockchain technology aims to improve the governance model and promote greater transparency and traceability in mining operations, a factor that contributes to the mitigation of corrupt practices and the strengthening of corporate responsibility. In addition, the production of synthetic diamonds emerges as a sustainable alternative, capable of reducing the environmental impact associated with traditional mining, and at the same time increasing the competitiveness of the sector in the global market. To support this work, an exploratory and explanatory methodology was adopted, including interviews with key stakeholders, such as two mining companies and the Department of Mines at the Faculty of Engineering of Agostinho Neto University. The referenced interviews enabled a detailed analysis of the current challenges of the sector and the opportunities related to the integration of disruptive technologies, such as blockchain technology, and sustainable practices, such as diamond synthesis. Therefore, the combination of such approaches can transform the Angolan mineral sector, aligning it with contemporary demands for transparency, sustainability, and operational efficiency.
- Open Access
- 28 February 2025
- Published by Cogsust Kft. in Cognitive Sustainability
- Vol. 4 (1)
Polymerization of purified residual glycerol from biodiesel production
In the face of climate change and the increasing frequency of climate-related disasters, there is a growing emphasis on renewable fuel sources to mitigate greenhouse gas emissions. Biodiesel, produced from crude or residual vegetable oils and animal fats, represents a significant biofuel option. Its production process involves transesterifying triglycerides with short-chain alcohols, resulting in biodiesel and low-purity glycerol as byproducts. This study explores the polymerization of residual glycerol as a sustainable strategy to enhance its value, particularly in light of the rising biodiesel production rates, which generate approximately 10% residual glycerol. The research focuses on synthesizing polymers from glycerol and highlights its potential as a method to repurpose a byproduct of biodiesel production. Experimental tests were conducted in a batch reactor, utilizing glycerol and adipic acid polycondensation in ratios of 1:0.75, 1:1, 1:1.5, and 1:2 to produce adipic polyglycerol. The reactions were carried out at 160 ºC with stirring at 60 RPM, using dibutyl phthalate as a catalyst, and monitored for water accumulation. Both partially purified and commercially bi-distilled glycerol were employed in the experiments. Infrared spectrophotometry analysis revealed significant molecular transformations in the polymers synthesized under varying reaction conditions. These findings provide promising prospects for utilizing this material in the production of polymers with the potential to serve as robust alternatives to petroleum-based plastics. This study concludes that residual glycerol from biodiesel production can be effectively utilized as a raw material for polymer synthesis, offering considerable potential to replace fossil-based polymers and significantly reduce environmental impact.
- 28 February 2025
- Published by Cogsust Kft. in Cognitive Sustainability
- Vol. 4 (1)
Open AccessPolymerization of purified residual glycerol from biodiesel production
In the face of climate change and the increasing frequency of climate-related disasters, there is a growing emphasis on renewable fuel sources to mitigate greenhouse gas emissions. Biodiesel, produced from crude or residual vegetable oils and animal fats, represents a significant biofuel option. Its production process involves transesterifying triglycerides with short-chain alcohols, resulting in biodiesel and low-purity glycerol as byproducts. This study explores the polymerization of residual glycerol as a sustainable strategy to enhance its value, particularly in light of the rising biodiesel production rates, which generate approximately 10% residual glycerol. The research focuses on synthesizing polymers from glycerol and highlights its potential as a method to repurpose a byproduct of biodiesel production. Experimental tests were conducted in a batch reactor, utilizing glycerol and adipic acid polycondensation in ratios of 1:0.75, 1:1, 1:1.5, and 1:2 to produce adipic polyglycerol. The reactions were carried out at 160 ºC with stirring at 60 RPM, using dibutyl phthalate as a catalyst, and monitored for water accumulation. Both partially purified and commercially bi-distilled glycerol were employed in the experiments. Infrared spectrophotometry analysis revealed significant molecular transformations in the polymers synthesized under varying reaction conditions. These findings provide promising prospects for utilizing this material in the production of polymers with the potential to serve as robust alternatives to petroleum-based plastics. This study concludes that residual glycerol from biodiesel production can be effectively utilized as a raw material for polymer synthesis, offering considerable potential to replace fossil-based polymers and significantly reduce environmental impact.
- Open Access
- 8 January 2025
- Published by Brazilian Journals in STUDIES IN MULTIDISCIPLINARY REVIEW
- Vol. 6 (1) , e13889
Barriers to implementing reverse logistics in companies: a systematic literature review
Reverse logistics provides a valuable perspective on productive processes, economic efficiency, social well-being, and environmental sustainability. Its implementation is essential at both macro and micro levels, influencing government policies and regulations as well as individual businesses. Despite the clear benefits of reverse logistics, several barriers impede its execution. This article aims to analyze the obstacles identified in the literature regarding reverse logistics implementation. Specifically, it explores the countries represented in the reviewed articles, the business sectors involved, the most frequently cited barriers, and the variations in barriers between countries with high and low incidence rates. The research employed a systematic literature review and qualitative analysis of a sample of articles. Key barriers identified include a shortage of qualified personnel, insufficient governmental policies and legislation, and limited financial incentives and investment. Notably, the majority of publications come from emerging countries, with Brazil and India leading in volume. The construction sector, recognized as a significant source of waste, also exhibits the highest number of barriers. This study offers a comprehensive overview of the challenges in implementing reverse logistics, enhancing understanding of how to overcome these obstacles.
- 8 January 2025
- Published by Brazilian Journals in STUDIES IN MULTIDISCIPLINARY REVIEW
- Vol. 6 (1) , e13889
Open AccessBarriers to implementing reverse logistics in companies: a systematic literature review
Reverse logistics provides a valuable perspective on productive processes, economic efficiency, social well-being, and environmental sustainability. Its implementation is essential at both macro and micro levels, influencing government policies and regulations as well as individual businesses. Despite the clear benefits of reverse logistics, several barriers impede its execution. This article aims to analyze the obstacles identified in the literature regarding reverse logistics implementation. Specifically, it explores the countries represented in the reviewed articles, the business sectors involved, the most frequently cited barriers, and the variations in barriers between countries with high and low incidence rates. The research employed a systematic literature review and qualitative analysis of a sample of articles. Key barriers identified include a shortage of qualified personnel, insufficient governmental policies and legislation, and limited financial incentives and investment. Notably, the majority of publications come from emerging countries, with Brazil and India leading in volume. The construction sector, recognized as a significant source of waste, also exhibits the highest number of barriers. This study offers a comprehensive overview of the challenges in implementing reverse logistics, enhancing understanding of how to overcome these obstacles.