Cláudio Moreira Júnior
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cláudio Moreira Júnior has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Sérgio Eduardo de Paiva Gonçalves
Universidade Estadual Paulista, Brasil
2 shared publications - Victoria Garcia De Carvalho
Instituto de Ciência e Tecnologia, Universidade Estadual Paulista “Júlio de Mesquita Filho”. São José dos Campos, SP, Brazil
2 shared publications - Amanda Rossato
Instituto de Ciência e Tecnologia, Universidade Estadual Paulista “Júlio de Mesquita Filho”. São José dos Campos, SP, Brazil
1 shared publication Bruno Amaral Haddad
DDS, Department of Restorative Dentistry, Institute of Science and Technology of São José dos Campos, Sao Paulo State University (Unesp), São Paulo, Brazil
1 shared publicationGuilherme De Siqueira Anzolini Saavedra
1 shared publication- Guilherme de Siqueira Ferreira Anzaloni Saavedra
Universidade Estadual Paulista, Brazil
1 shared publication
Latest Publications
- Open Access
- 4 November 2026
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 29, e5284
Prosthodontic reintervention in a young patient with esthetic disharmony and periodontal injury: a clinical report with a 36-month follow-up
Objective: the present study aims to report a clinical case of prosthetic reintervention, discussing the clinical factors involved in decision-making and illustrating a rehabilitation protocol with a long-term follow-up (36 months). Case report: A 25-year-old female patient presented to the dental clinic of a higher education institution with complaints of esthetic dissatisfaction when smiling and bleeding around the teeth when cleaning. On intraoral examination, a thick and irregular periodontium was observed, in addition to the presence of deficient veneers in shape, size and adaptation on teeth #11 and #21. Probing revealed prosthetic maladaptation at the gingival margin and abundant bleeding. The planning involved the removal of the veneers, recovery of periodontal health with supra- and subgingival scaling, study of the shape of the new facets and cementation, where rubber dam was performed from the immediate sealing of the dentin to the cementation of the ceramic crowns. Conclusion: Despite periodontal limitations, the restorative procedures were able to act on injuries and promote health to the tissues, where after 36 months, a correct integration between the periodontal tissue and the restorative material is perceived, presenting favorable biomimicry. Attention to the signs of restorative failures is paramount for therapeutic decisions involving dental and periodontal health.
- 4 November 2026
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 29, e5284
Open AccessProsthodontic reintervention in a young patient with esthetic disharmony and periodontal injury: a clinical report with a 36-month follow-up
Objective: the present study aims to report a clinical case of prosthetic reintervention, discussing the clinical factors involved in decision-making and illustrating a rehabilitation protocol with a long-term follow-up (36 months). Case report: A 25-year-old female patient presented to the dental clinic of a higher education institution with complaints of esthetic dissatisfaction when smiling and bleeding around the teeth when cleaning. On intraoral examination, a thick and irregular periodontium was observed, in addition to the presence of deficient veneers in shape, size and adaptation on teeth #11 and #21. Probing revealed prosthetic maladaptation at the gingival margin and abundant bleeding. The planning involved the removal of the veneers, recovery of periodontal health with supra- and subgingival scaling, study of the shape of the new facets and cementation, where rubber dam was performed from the immediate sealing of the dentin to the cementation of the ceramic crowns. Conclusion: Despite periodontal limitations, the restorative procedures were able to act on injuries and promote health to the tissues, where after 36 months, a correct integration between the periodontal tissue and the restorative material is perceived, presenting favorable biomimicry. Attention to the signs of restorative failures is paramount for therapeutic decisions involving dental and periodontal health.
- 1 December 2025
- Published by VM Comunicações in ImplantNews Reabilitação Oral
- Vol. 10 (6)
Estratégias digitais para restaurações indiretas em ambientes de trabalho desafiadores – relato de caso
O objetivo deste trabalho é apresentar um relato de caso descrevendo o uso de tecnologias digitais na realização de restaurações indiretas em ambientes de trabalho desafiadores, sem acesso a tais ferramentas. No relato é abordado o procedimento realizado em uma paciente de 43 anos, residente da comunidade de Itira, interior da cidade de Araçuaí, no Vale do Jequitinhonha, Minas Gerais, Brazil. O caso envolveu a restauração de uma cavidade classe II MO no dente 16 em resina composta e a confecção de uma coroa de cerâmica fresada para o dente 14. Nas etapas transoperatórias, foi utilizada a estratégia do adesivo auto condicionante (Clearfil SE Bond, Kuraray Noritake) com ataque ácido seletivo no esmalte e o cimento dual (Variolink Esthetic DC,Ivoclar Vivadent, cor Neutra), permitindo a fixação das restaurações. Para a restauração direta, foi utilizada uma resina composta (Z350 XT A2B (3M), e o pilar da coroa confeccionado em EverX Flow e EverX Posterior (GC Brazil). A coroa foi fresada a partir do bloco de cerâmica vítrea reforçada por leucita (IPS Empress CAD LT A2, Ivoclar Vivadent), e a fotopolimerização realizada (Grand Valo, Ultradent). A utilização do fluxo digital, que envolveu escaneamento intraoral, planejamento virtual e fresagem da coroa, foi fundamental para superar as dificuldades impostas pelo ambiente de trabalho. A abordagem digital não só proporcionou precisão e estética, mas também otimizou o processo, mostrando-se uma solução eficaz para restaurações indiretas em áreas remotas. Palavras-chave: CAD/CAM, reabilitação bucal, coroa dentária, cerâmica.
- 1 December 2025
- Published by VM Comunicações in ImplantNews Reabilitação Oral
- Vol. 10 (6)
Estratégias digitais para restaurações indiretas em ambientes de trabalho desafiadores – relato de caso
O objetivo deste trabalho é apresentar um relato de caso descrevendo o uso de tecnologias digitais na realização de restaurações indiretas em ambientes de trabalho desafiadores, sem acesso a tais ferramentas. No relato é abordado o procedimento realizado em uma paciente de 43 anos, residente da comunidade de Itira, interior da cidade de Araçuaí, no Vale do Jequitinhonha, Minas Gerais, Brazil. O caso envolveu a restauração de uma cavidade classe II MO no dente 16 em resina composta e a confecção de uma coroa de cerâmica fresada para o dente 14. Nas etapas transoperatórias, foi utilizada a estratégia do adesivo auto condicionante (Clearfil SE Bond, Kuraray Noritake) com ataque ácido seletivo no esmalte e o cimento dual (Variolink Esthetic DC,Ivoclar Vivadent, cor Neutra), permitindo a fixação das restaurações. Para a restauração direta, foi utilizada uma resina composta (Z350 XT A2B (3M), e o pilar da coroa confeccionado em EverX Flow e EverX Posterior (GC Brazil). A coroa foi fresada a partir do bloco de cerâmica vítrea reforçada por leucita (IPS Empress CAD LT A2, Ivoclar Vivadent), e a fotopolimerização realizada (Grand Valo, Ultradent). A utilização do fluxo digital, que envolveu escaneamento intraoral, planejamento virtual e fresagem da coroa, foi fundamental para superar as dificuldades impostas pelo ambiente de trabalho. A abordagem digital não só proporcionou precisão e estética, mas também otimizou o processo, mostrando-se uma solução eficaz para restaurações indiretas em áreas remotas. Palavras-chave: CAD/CAM, reabilitação bucal, coroa dentária, cerâmica.
- Open Access
- 1 October 2021
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 24 (4)
Full digital workflow in fixed adhesive dental prosthesis: Description of a clinical technique
Digital dentistry has gained space in several dental specialties. It is possible to achieve excellent results with the digital workflow, which combines the efficiency of the restorative material with a greater marginal adaptation. This study aimed to report a clinical case through the digital workflow, with a faster and clinically acceptable prosthetic resolution. In this clinical case report, digital workflow allowed a faster and clinically acceptable prosthetic resolution. A 45-year-old female patient reported cementation failure of the prosthetic crown on tooth 14. As it was a vital tooth, the tooth received a total crown preparation. In the same clinical session, the patient's mouth was scanned then a capture software obtained a virtual model. After, the design software planned a digital "diagnostic wax-up", so a leucitic ceramic was chosen for the rehabilitation. The ceramic block was milled and receive stain and glaze, dispensing the prosthesis laboratory. Then, the adhesive cementation was performed with a dual-polymerized resin cement. The final crown had ideal adaptation, with no need for interproximal and occlusal adjustments, with an excellent marginal fit. Within the limitations of this study, this case report showed that the digital workflow allowed a favorable result in a shorter working time, which brought back function and aesthetics, without the need for interproximal and occlusal adjustments. Keywords Prosthodontics; Cosmetic dentistry; CAD-CAM.
- 1 October 2021
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 24 (4)
Open AccessFull digital workflow in fixed adhesive dental prosthesis: Description of a clinical technique
Digital dentistry has gained space in several dental specialties. It is possible to achieve excellent results with the digital workflow, which combines the efficiency of the restorative material with a greater marginal adaptation. This study aimed to report a clinical case through the digital workflow, with a faster and clinically acceptable prosthetic resolution. In this clinical case report, digital workflow allowed a faster and clinically acceptable prosthetic resolution. A 45-year-old female patient reported cementation failure of the prosthetic crown on tooth 14. As it was a vital tooth, the tooth received a total crown preparation. In the same clinical session, the patient's mouth was scanned then a capture software obtained a virtual model. After, the design software planned a digital "diagnostic wax-up", so a leucitic ceramic was chosen for the rehabilitation. The ceramic block was milled and receive stain and glaze, dispensing the prosthesis laboratory. Then, the adhesive cementation was performed with a dual-polymerized resin cement. The final crown had ideal adaptation, with no need for interproximal and occlusal adjustments, with an excellent marginal fit. Within the limitations of this study, this case report showed that the digital workflow allowed a favorable result in a shorter working time, which brought back function and aesthetics, without the need for interproximal and occlusal adjustments. Keywords Prosthodontics; Cosmetic dentistry; CAD-CAM.
- Open Access
- 30 September 2020
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 23 (4) , 7p
Overdenture on dental remaining in oncological patients: Case report
Head and neck cancer occupy the seventh place among the most common neoplasms in the world, with an annual incidence of approximately 640,000 new cases. Radiotherapy treatment has been highlighted, because there is greater tissue preservation, possibility of regression of the disease, decreased tumor volume, prevention of possible tumor recurrences and metastases, and even total cancer cure, but patients undergoing radiotherapy are at high risk of osteoradionecrosis if they perform surgical interventions in the region, such as dental implants and dental extraction, making prosthetic rehabilitation of partially edentulous patients after treating oral cancer something complex and often omitted; although it is a crucial factor in restoring oral function. Thus, the aim of the present study was to describe the planning, treatment and follow-up of a twelve-month prosthetic approach to rehabilitate the lower arch shape and function of a partially edentulous patient undergoing head and neck radiotherapy with a full denture mucus supported and tooth retained. After twelve months of follow-up, it was possible to evidence the functional and aesthetic clinical success, with preserved occlusal pattern, soft and bone tissue around[ and dental roots. KEYWORDS Radiotherapy; Head and Neck Neoplasms; Overdentures; Oral Rehabilitation.
- 30 September 2020
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 23 (4) , 7p
Open AccessOverdenture on dental remaining in oncological patients: Case report
Head and neck cancer occupy the seventh place among the most common neoplasms in the world, with an annual incidence of approximately 640,000 new cases. Radiotherapy treatment has been highlighted, because there is greater tissue preservation, possibility of regression of the disease, decreased tumor volume, prevention of possible tumor recurrences and metastases, and even total cancer cure, but patients undergoing radiotherapy are at high risk of osteoradionecrosis if they perform surgical interventions in the region, such as dental implants and dental extraction, making prosthetic rehabilitation of partially edentulous patients after treating oral cancer something complex and often omitted; although it is a crucial factor in restoring oral function. Thus, the aim of the present study was to describe the planning, treatment and follow-up of a twelve-month prosthetic approach to rehabilitate the lower arch shape and function of a partially edentulous patient undergoing head and neck radiotherapy with a full denture mucus supported and tooth retained. After twelve months of follow-up, it was possible to evidence the functional and aesthetic clinical success, with preserved occlusal pattern, soft and bone tissue around[ and dental roots. KEYWORDS Radiotherapy; Head and Neck Neoplasms; Overdentures; Oral Rehabilitation.
- Open Access
- 31 January 2020
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 23 (1) , 7
Analysis of adhesive bond strength under simulated pulpal pressure on different dentin thicknesses
Objective: Evaluate the microtensile bond strength (µTBS) in different dentin thicknesses, under simulated pulpal pressure (SPP), submitted to an adhesive technique using laser irradiation. Material and methods: Forty sound human molars were sectioned and randomly divided into two groups (n=20): Group 1 – 1 mm of dentin thickness; Group 2 – 2 mm of dentin thickness. Each group was divided into two subgroups (n=10): Subgroup A – Absence of SPP; Subgroup P – Presence of SPP (15 cm H2O). The samples were sequentially treated with: 37% phosphoric acid, adhesive system (Adper Single Bond 2), Nd:YAG laser irradiation (60 s, 1064 nm, 10 Hz) using 60 and 100 mJ/pulse energy parameters and photopolymerization (10 s). A composite resin block (Filtek Z350) was built up onto the irradiated area. After 30 days stored in water, the samples were sectioned and submitted to microtensile test (10 kgf load cell, 0.5mm/min). Data were analyzed by three-way ANOVA and Tukey tests. Results: Three-way ANOVA revealed no significant differences for SPP (p=0.0821) and for dentin thickness p= 0.9405) on bond strength. The laser energy parameters (p=0.001) indicated that 100 mJ showed greater µTBS means compared to the group irradiated with 60 mJ. Dentin thickness did not affect on µTBS. The presence of SPP reduced the mean µTBS values. Conclusions: Simulated pulpal pressure did not affect the µTBS using 60 mJ of laser energy parameter. At 100 mJ, the presence of SPP negatively influenced the bond strength, regardless of dentin thickness. KEYWORDS Bond strength; Dentin; Intrapulpal pressure; Nd:YAG laser.
- 31 January 2020
- Published by Editora Cubo in Brazilian Dental Science
- Vol. 23 (1) , 7
Open AccessAnalysis of adhesive bond strength under simulated pulpal pressure on different dentin thicknesses
Objective: Evaluate the microtensile bond strength (µTBS) in different dentin thicknesses, under simulated pulpal pressure (SPP), submitted to an adhesive technique using laser irradiation. Material and methods: Forty sound human molars were sectioned and randomly divided into two groups (n=20): Group 1 – 1 mm of dentin thickness; Group 2 – 2 mm of dentin thickness. Each group was divided into two subgroups (n=10): Subgroup A – Absence of SPP; Subgroup P – Presence of SPP (15 cm H2O). The samples were sequentially treated with: 37% phosphoric acid, adhesive system (Adper Single Bond 2), Nd:YAG laser irradiation (60 s, 1064 nm, 10 Hz) using 60 and 100 mJ/pulse energy parameters and photopolymerization (10 s). A composite resin block (Filtek Z350) was built up onto the irradiated area. After 30 days stored in water, the samples were sectioned and submitted to microtensile test (10 kgf load cell, 0.5mm/min). Data were analyzed by three-way ANOVA and Tukey tests. Results: Three-way ANOVA revealed no significant differences for SPP (p=0.0821) and for dentin thickness p= 0.9405) on bond strength. The laser energy parameters (p=0.001) indicated that 100 mJ showed greater µTBS means compared to the group irradiated with 60 mJ. Dentin thickness did not affect on µTBS. The presence of SPP reduced the mean µTBS values. Conclusions: Simulated pulpal pressure did not affect the µTBS using 60 mJ of laser energy parameter. At 100 mJ, the presence of SPP negatively influenced the bond strength, regardless of dentin thickness. KEYWORDS Bond strength; Dentin; Intrapulpal pressure; Nd:YAG laser.