MVMykhailo Volianskyi

Mykhailo Volianskyi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mykhailo Volianskyi has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Substantiating the rational parameters and operation modes for the hemp seed centrifugal dehuller

    by Viktor Sheichenko, Dmytro Petrachenko, Serhii Koropchenko, Ivan Rogovskii, Oleksandr Gorbenko, Mykhailo Volianskyi, Denys Sheichenko

    The object of research is technological processes, seeds of industrial hemp, and working bodies of the dehuller. A centrifugal-type device for crushing hemp seeds with a closed sector-type working body has been designed. Owing to this, the task related to seed dehulling was solved with a high level of efficiency in separating the seed coat from the kernel. The rational parameters for the dehuller have been substantiated: the diameter of the impeller is 162 mm, the gap between the impeller and the seed repelling panel is 80 mm, the frequency of rotation of the impeller is 2000 min–1. It was established that with the specified parameters and moisture content of the seeds within the limits of conditional (12.0–13.0 %), it is advisable to carry out dehulling process without preliminary separation of the seeds into fractions by width. It was established that an increase in seed size leads to a corresponding increase in the weight share of seed kernels. About 58.2 % of the main mass of seeds is the average fraction with a width of 2.5 to 3.0 mm. It was found that reducing the diameter of the impeller (from 236 mm to 162 mm) at a seed moisture content of 8.8 % improved the efficiency of dehulling. At a rotation frequency of the impeller of 2000 min–1, the highest total number of intact and destroyed kernels (23.23–29.33 %) was achieved for the two studied moistures. With an increase in seed moisture content from 8.8 % to 12.0 %, the number of dehulled kernels in the hempseed cake increased. It was noted that for seeds with a moisture content of 8.8 %, an increase in the gap led to a decrease in the dehulling efficiency for each of the three investigated seed fractions. The total number of dehulled kernels under such conditions decreased by 2.4–6.8 % and amounted to 16.4–26.9 %. For seeds with a moisture content of 12.0 %, an increase in the gap, on the contrary, increased the dehulling efficiency for each of the three investigated seed fractions. The total number of dehulled kernels for seeds of marked moisture increased within the range of 1.4–3.6 % and amounted to 27.4–31.0 % Об’єктом дослідження є технологічні процеси, насіння промислових конопель, робочі органи обрушувача. Розроблено пристрій відцентрового типу для обрушування насіння конопель із робочим органом закритого секторального типу. Завдяки цьому вирішено проблему обрушування насіння із високим рівнем ефективності відділення насіннєвої оболонки від ядра. Обгрунтовано раціональні параметри обрушувача: діаметр робочого колеса 162 мм, зазор між робочим колесом та відбивною декою 80 мм, частота обертання робочого колеса 2000 хв.-1. Встановлено, що за зазначених параметрів та вологості насіння в межах кондиційної (12,0–13,0 %) процес обрушування доцільно проводити без попереднього розділення насіння на фракції за шириною. Встановлено, що збільшення розмірів насіння призводить до відповідного зростання частки ваги насіннєвих ядер. Близько 58,2 % в основній масі насіння складає середня фракція шириною від 2,5 до 3,0 мм. Встановлено, що зменшення діаметру робочого колеса (від 236 мм до 162 мм) за вологості насіння 8,8 % підвищувало ефективність обрушування. За частоти обертання робочого колеса 2000 хв.-1 досягнуто найбільшу сумарну кількість цілих та зруйнованих ядер (23,23–29,33 %) для двох досліджуваних вологостей. Зі збільшенням вологості насіння від 8,8 % до 12,0 % кількість обрушених ядер в рушанці збільшувалося. Відзначено, що для насіння вологістю 8,8 % збільшення зазору призводило до зменшення ефективності обрушування для кожної з трьох досліджуваних фракцій насіння. Сумарна кількість обрушених ядер за таких умов зменшувалася в межах 2,4–6,8 % та складала 16,4–26,9 %. Для насіння вологістю 12,0 % збільшення зазору, навпаки, підвищувало ефективність обрушування для кожної з трьох досліджуваних фракцій насіння. Сумарна кількість обрушених ядер для насіння відміченої вологості збільшувалася в межах 1,4–3,6 % та складала 27,4–31,0 %


  • Open Access

    Comprehensive assessment of technical condition of vehicles during operation based on Harrington’s desirability function

    by Viktor Aulin, Ivan Rogovskii, Oleh Lyashuk, Liudmyla Titova, Andrii Hrynkiv, Dmytro Mironov, Mykhailo Volianskyi, Roman Rogatynskyi, Oleksiy Solomka, Serhii Lysenko

    The object of research is the process of changing the technical condition of vehicles during their operation. The study solved the problem of comprehensive evaluation of change in the technical condition based on Harrington’s desirability function. The essence of the results is as follows. A scale of desirability was built and a set of criteria for assessing the technical condition of vehicles was clarified. A general desirability index is proposed as a convolution of partial Harrington desirability functions. When solving the investigated problem, the characteristics and properties of the partial and generalized Harrington’s desirability function and their graphical representation were taken into account. Using an example of the technical condition of the chassis and braking system of vehicles, a set of controlled parameters was formed. Based on the values of the controlled parameters, the regression equation of the partial Harrington desirability functions was obtained. The value of the weighting coefficients of each of the criteria was determined and the generalized desirability function was calculated. As a result of the study, it was established that if the generalized criterion of desirability is D0.63 – in a good condition and cannot be the cause of a traffic accident. An applied aspect of the results is the implementation of the technique of comprehensive assessment of the technical condition of the vehicle. This causes an increase in the productivity of the expert (specialist), will shorten the period of the auto technical examination, and improve its quality. The results could be used by insurance companies and investigators, investigators and judges when considering traffic accidents


  • Substantiation of vehicle parameters for in-line fruit harvesting technology

    by V. M. Martyshko, National University of Life and Environmental Sciences of Ukraine, M. S. Volyanskij

    Збалансований розвиток всіх ланок АПК – необхідна умова забезпечення країни продовольством, зокрема плодоовочевою сировиною. В даний час слабкий розвиток переробних галузей АПК, виробничої інфраструктури комплексу призводять до значних втрат продукції сільського господарства. Так, втрати зібраних плодів і овочів становлять 40-45%. Потреба в транспортних засобах для садівництва і овочівництва, задовольняється лише на 55-60%. Одним з найбільш істотних і складних завдань є зменшення ушкоджень і втрат сільськогосподарської продукції, де відповідальна роль відводиться транспортним засобам. Як показав аналіз, в процесі збирання яблук більше 15-20 % продукції не доходить до споживача. Для внутрішньогосподарського перевезення плодів використовують ящики або контейнери. Плоди зерняткових культур перевозять безтарним способом (в кузовах автомобілів і тракторних причепах). Використання транспортних засобів загального призначення не відповідають агротехнічним вимогам до перевезення плодів, а спеціальні транспортні засоби для перевезення плодів безтарним способом відсутні. Викладено доцільність використання для потокової технології збирання плодів спеціальних контейнерів-накопичувачів, обґрунтовані основні їх параметри, в томі числі оптимальна вантажопідйомність.