Yakshita Malhotra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yakshita Malhotra has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Zetian Mi
Department of Electrical Engineering and Computer Science University of Michigan Ann Arbor Michigan USA
10 shared publications - Yuanpeng Wu
Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, USA
7 shared publications - Yixin Xiao
Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, USA
6 shared publications - Ayush Pandey
University of Michigan
4 shared publications Yifu Guo
4 shared publicationsJiangnan Liu
Department of Electrical Engineering and Computer Science, University of Michigan, 1301 Beal Avenue, Ann Arbor, Michigan 48109, United States
3 shared publications
Latest Publications
- 18 June 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (13) , 23712-23721
Vertically integrated gate-all-around nano-LED with enhanced radiative efficiency
The continued drive toward device miniaturization and monolithic integration has created an urgent need for nanoscale light sources with high efficiency and controllable carrier dynamics. Here, we report a gate-all-around (GAA) nanoscale light-emitting diode (nano-LED), in which a conformal gate electrode surrounds both the n-GaN region and the InGaN/GaN multiple-quantum-wells (MQWs) active region. By simply electrically modulating the surface potential, the GAA structure suppresses surface carrier recombination and confines radiative recombination to the undamaged central bulk region, overcoming a primary efficiency bottleneck in submicron III-nitride emitters. Moreover, the proposed GAA nano-LED exhibits transistor-like current modulation, with positive gate bias enhancing carrier injection and negative bias suppressing it, enabling full on-off switching of electroluminescence. Importantly, negative gate bias reduces surface recombination and non-radiative leakage, resulting in a nearly fourfold enhancement of peak quantum yield. Hence, this work demonstrates, for the first time to the best of our knowledge, a vertically integrated GAA field effect transistor-LED platform at the nanoscale and establishes a promising route for achieving high-efficiency nanowire LEDs and large-scale three-dimensional optoelectronic integration.
- 18 June 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (13) , 23712-23721
Vertically integrated gate-all-around nano-LED with enhanced radiative efficiency
The continued drive toward device miniaturization and monolithic integration has created an urgent need for nanoscale light sources with high efficiency and controllable carrier dynamics. Here, we report a gate-all-around (GAA) nanoscale light-emitting diode (nano-LED), in which a conformal gate electrode surrounds both the n-GaN region and the InGaN/GaN multiple-quantum-wells (MQWs) active region. By simply electrically modulating the surface potential, the GAA structure suppresses surface carrier recombination and confines radiative recombination to the undamaged central bulk region, overcoming a primary efficiency bottleneck in submicron III-nitride emitters. Moreover, the proposed GAA nano-LED exhibits transistor-like current modulation, with positive gate bias enhancing carrier injection and negative bias suppressing it, enabling full on-off switching of electroluminescence. Importantly, negative gate bias reduces surface recombination and non-radiative leakage, resulting in a nearly fourfold enhancement of peak quantum yield. Hence, this work demonstrates, for the first time to the best of our knowledge, a vertically integrated GAA field effect transistor-LED platform at the nanoscale and establishes a promising route for achieving high-efficiency nanowire LEDs and large-scale three-dimensional optoelectronic integration.
- Top Cited PapersOpen Access
- 28 February 2026
- Published by Springer Nature in Light: Science & Applications
- Vol. 15 (1) , 133
High efficiency, high color purity red micro-light-emitting diodes
InGaN-based micro-light-emitting diodes (micro-LEDs) are emerging to revolutionize the display and lighting technologies, particularly for their excellent robustness, high brightness, high efficiency and small pixel size. Despite the success of blue LEDs, long-wavelength emission, particularly the red emission, has been a challenge for InGaN-based micro-LEDs. Overcoming the low quantum efficiency, color instability, and broad emission in the red wavelength regime are among the most urgent and critical problems that inhibit the commercial implementation of micro-LED technology. In this work, we utilize a nanowire photonic crystal (PhC) structure to reform the radiation behavior of red-emitting InGaN micro-LEDs. Through detailed optimization on the PhC design and device fabrication, we demonstrate red-emitting micro-LEDs with a peak wavelength at 617 nm and a full-width-at-half-maximum (FWHM) of 5 nm, which is about one order of magnitude narrower than previous reported values and is paramount for achieving high color purity. The chromaticity property is highly stable with varying injection currents due to the coupling of emission to photonic band edge mode. A high external quantum efficiency of over 10% was measured from micro-LEDs with a size of 1 µm 2 . This work provides a vital strategy for high-performance red-emitting micro-LEDs and a potential pathway for full-color micro-LED technology by using all III-nitride semiconductors.
- 28 February 2026
- Published by Springer Nature in Light: Science & Applications
- Vol. 15 (1) , 133
Top Cited PapersOpen AccessHigh efficiency, high color purity red micro-light-emitting diodes
InGaN-based micro-light-emitting diodes (micro-LEDs) are emerging to revolutionize the display and lighting technologies, particularly for their excellent robustness, high brightness, high efficiency and small pixel size. Despite the success of blue LEDs, long-wavelength emission, particularly the red emission, has been a challenge for InGaN-based micro-LEDs. Overcoming the low quantum efficiency, color instability, and broad emission in the red wavelength regime are among the most urgent and critical problems that inhibit the commercial implementation of micro-LED technology. In this work, we utilize a nanowire photonic crystal (PhC) structure to reform the radiation behavior of red-emitting InGaN micro-LEDs. Through detailed optimization on the PhC design and device fabrication, we demonstrate red-emitting micro-LEDs with a peak wavelength at 617 nm and a full-width-at-half-maximum (FWHM) of 5 nm, which is about one order of magnitude narrower than previous reported values and is paramount for achieving high color purity. The chromaticity property is highly stable with varying injection currents due to the coupling of emission to photonic band edge mode. A high external quantum efficiency of over 10% was measured from micro-LEDs with a size of 1 µm 2 . This work provides a vital strategy for high-performance red-emitting micro-LEDs and a potential pathway for full-color micro-LED technology by using all III-nitride semiconductors.
- Top Cited Papers
- 30 January 2026
- Published by Springer Nature in Nature Energy
- Vol. 11 (4) , 571-580
Excitonic quantum superlattices for efficient photocatalytic water splitting
- 30 January 2026
- Published by Springer Nature in Nature Energy
- Vol. 11 (4) , 571-580
Top Cited PapersExcitonic quantum superlattices for efficient photocatalytic water splitting
- 25 August 2025
- Published by American Chemical Society (ACS) in ACS Photonics
Toward High Wall-Plug Efficiency in Nanowire-Based Red Micro-LEDs
- 25 August 2025
- Published by American Chemical Society (ACS) in ACS Photonics
Toward High Wall-Plug Efficiency in Nanowire-Based Red Micro-LEDs
- 28 July 2025
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 12 (8) , 4182-4188
Carrier Dynamics in Multiple Quantum Wells in InGaN/GaN Nanowire Heterostructures
- 28 July 2025
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 12 (8) , 4182-4188
Carrier Dynamics in Multiple Quantum Wells in InGaN/GaN Nanowire Heterostructures
- Open Access
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (1) , 1-8
Design Principles and Performance Limitation of InGaN Nanowire Photonic Crystal Micro-LEDs
While micro-LEDs are crucial for ultrahigh resolution micro-displays, the efficiency of currently reported micro-LEDs degrades dramatically with decreasing size. Recently, the bottom-up nanowire approach has shown promise to break the efficiency bottleneck of this size effect. In this article, we investigated the design of nanowire photonic crystal structure for micro-LED applications and revealed its correlation with the Purcell effect. Key performance characteristics including efficiency, emission directionality, and spectral linewidth are thoroughly studied. For an LED structure with low internal quantum efficiency (IQE) of 10% due to high non-radiative recombination, an enhancement of ∼30% is found viable by using a properly designed photonic crystal. High emission directionality and a narrow spectral linewidth (∼ 5 nm) can be obtained with 60% of the light being emitted within a 20° acceptance angle.
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (1) , 1-8
Open AccessDesign Principles and Performance Limitation of InGaN Nanowire Photonic Crystal Micro-LEDs
While micro-LEDs are crucial for ultrahigh resolution micro-displays, the efficiency of currently reported micro-LEDs degrades dramatically with decreasing size. Recently, the bottom-up nanowire approach has shown promise to break the efficiency bottleneck of this size effect. In this article, we investigated the design of nanowire photonic crystal structure for micro-LED applications and revealed its correlation with the Purcell effect. Key performance characteristics including efficiency, emission directionality, and spectral linewidth are thoroughly studied. For an LED structure with low internal quantum efficiency (IQE) of 10% due to high non-radiative recombination, an enhancement of ∼30% is found viable by using a properly designed photonic crystal. High emission directionality and a narrow spectral linewidth (∼ 5 nm) can be obtained with 60% of the light being emitted within a 20° acceptance angle.
- 7 October 2024
- Published by American Chemical Society (ACS) in Nano Letters
Spectrally Pure, High Operational Dynamic Range, Deep Red Micro-LEDs
III-nitride-based micro-light-emitting diodes (micro-LEDs) are currently under rapid development for next-generation high-resolution and high-brightness displays and augmented/virtual reality (AR/VR) technologies. However, it remains elusive to achieve red-emitting III-nitride micro-LEDs with a microscale size, high efficiency, and high spectral stability, posing significant impediments to the development of full-color micro-LEDs. In this work, through detailed strain engineering and control of charge carrier transport, we achieved pure red emission (≥620 nm) micro-LEDs over 2 orders of magnitude of injection current variation. We show both theoretically and experimentally that the combination of a short-period InGaN/GaN superlattice and a thick n-type GaN interlayer can not only relieve the quantum-confined Stark effect in the active region but also suppress parasitic emission from the superlattice. The optimized deep red micro-LEDs with a device lateral dimension of ∼1 μm feature a maximal external quantum efficiency of over 3% emitting at ∼660 nm.
- 7 October 2024
- Published by American Chemical Society (ACS) in Nano Letters
Spectrally Pure, High Operational Dynamic Range, Deep Red Micro-LEDs
III-nitride-based micro-light-emitting diodes (micro-LEDs) are currently under rapid development for next-generation high-resolution and high-brightness displays and augmented/virtual reality (AR/VR) technologies. However, it remains elusive to achieve red-emitting III-nitride micro-LEDs with a microscale size, high efficiency, and high spectral stability, posing significant impediments to the development of full-color micro-LEDs. In this work, through detailed strain engineering and control of charge carrier transport, we achieved pure red emission (≥620 nm) micro-LEDs over 2 orders of magnitude of injection current variation. We show both theoretically and experimentally that the combination of a short-period InGaN/GaN superlattice and a thick n-type GaN interlayer can not only relieve the quantum-confined Stark effect in the active region but also suppress parasitic emission from the superlattice. The optimized deep red micro-LEDs with a device lateral dimension of ∼1 μm feature a maximal external quantum efficiency of over 3% emitting at ∼660 nm.
- 10 April 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (15) , 151103
A red-emitting micrometer scale LED with external quantum efficiency >8%
Significant efforts are being put into the development of efficient micrometer-scale light emitting diodes (LEDs) for future display technologies due to their marked benefits over existing displays. To date, however, the efficiency of microLED devices remains significantly lower than that of conventional broad-area devices. The deterioration in device performance with smaller device size has been linked to the plasma damage induced on mesa sidewalls during device fabrication. Here, we studied bottom-up red-emitting nanowire LEDs with different Mg doping levels in the p-GaN layer. The resulting sub-micron LED devices show a distinct improvement in efficiency with increasing Mg dopant incorporation. Through optimization of the doping, we measured an external quantum efficiency of ∼8.3% and a wall-plug efficiency of ∼4.6%, at a current density of ∼1 A/cm2, for a red-emitting sub-micrometer scale LED operating at >630 nm. This study highlights the importance of p-doping in microLEDs for attaining high efficiency performance in nanostructure-based devices.
- 10 April 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (15) , 151103
A red-emitting micrometer scale LED with external quantum efficiency >8%
Significant efforts are being put into the development of efficient micrometer-scale light emitting diodes (LEDs) for future display technologies due to their marked benefits over existing displays. To date, however, the efficiency of microLED devices remains significantly lower than that of conventional broad-area devices. The deterioration in device performance with smaller device size has been linked to the plasma damage induced on mesa sidewalls during device fabrication. Here, we studied bottom-up red-emitting nanowire LEDs with different Mg doping levels in the p-GaN layer. The resulting sub-micron LED devices show a distinct improvement in efficiency with increasing Mg dopant incorporation. Through optimization of the doping, we measured an external quantum efficiency of ∼8.3% and a wall-plug efficiency of ∼4.6%, at a current density of ∼1 A/cm2, for a red-emitting sub-micrometer scale LED operating at >630 nm. This study highlights the importance of p-doping in microLEDs for attaining high efficiency performance in nanostructure-based devices.
- 4 October 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 119 (14) , 141110
High efficiency InGaN nanowire tunnel junction green micro-LEDs
We report on the study of InGaN nanowire green light emitting diodes (LEDs) with lateral dimensions varying from ∼1 to 10 μm. For a device with an areal size ∼3 × 3 μm2, a maximum external quantum efficiency ∼5.5% was directly measured on wafer without any packaging. The efficiency peaks at ∼3.4 A/cm2 and exhibits ∼30% drop at an injection current density ∼28 A/cm2. Detailed analysis further suggests that a maximum external quantum efficiency in the range of 30%–90% can potentially be achieved for InGaN nanowire micro-LEDs by optimizing the light extraction efficiency, reducing point defect formation, and controlling electron overflow. This study offers a viable path for achieving ultrahigh efficiency micro-LEDs operating in the visible.
- 4 October 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 119 (14) , 141110
High efficiency InGaN nanowire tunnel junction green micro-LEDs
We report on the study of InGaN nanowire green light emitting diodes (LEDs) with lateral dimensions varying from ∼1 to 10 μm. For a device with an areal size ∼3 × 3 μm2, a maximum external quantum efficiency ∼5.5% was directly measured on wafer without any packaging. The efficiency peaks at ∼3.4 A/cm2 and exhibits ∼30% drop at an injection current density ∼28 A/cm2. Detailed analysis further suggests that a maximum external quantum efficiency in the range of 30%–90% can potentially be achieved for InGaN nanowire micro-LEDs by optimizing the light extraction efficiency, reducing point defect formation, and controlling electron overflow. This study offers a viable path for achieving ultrahigh efficiency micro-LEDs operating in the visible.
- 6 July 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (1) , 011104
Micrometer scale InGaN green light emitting diodes with ultra-stable operation
We report on the demonstration of InGaN photonic nanocrystal light emitting diodes (LEDs), which operate in the green wavelength (∼548 nm). The devices are designed to operate at the Γ point of the photonic band structure and exhibit a spectral linewidth ∼4 nm, which is nearly five to ten times narrower than that of conventional InGaN quantum well LEDs in this wavelength range. Significantly, the device performance, in terms of the emission peak and spectral linewidth, is nearly invariant with injection current, suggesting the insusceptibility to quantum-confined Stark effect commonly seen in InGaN quantum wells. The external quantum efficiency is characterized by a sharp rise with increasing current and reaches a maximum at ∼5 A/cm2, which is comparable to conventional blue quantum well LEDs. A relatively small (∼30%) efficiency droop was measured at an injection current density over 200 A/cm2 at room temperature without any active cooling.
- 6 July 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (1) , 011104
Micrometer scale InGaN green light emitting diodes with ultra-stable operation
We report on the demonstration of InGaN photonic nanocrystal light emitting diodes (LEDs), which operate in the green wavelength (∼548 nm). The devices are designed to operate at the Γ point of the photonic band structure and exhibit a spectral linewidth ∼4 nm, which is nearly five to ten times narrower than that of conventional InGaN quantum well LEDs in this wavelength range. Significantly, the device performance, in terms of the emission peak and spectral linewidth, is nearly invariant with injection current, suggesting the insusceptibility to quantum-confined Stark effect commonly seen in InGaN quantum wells. The external quantum efficiency is characterized by a sharp rise with increasing current and reaches a maximum at ∼5 A/cm2, which is comparable to conventional blue quantum well LEDs. A relatively small (∼30%) efficiency droop was measured at an injection current density over 200 A/cm2 at room temperature without any active cooling.