Janet M. Denbeigh

Biological effectiveness in ion therapy varies with radiation quality and biological context, yet cancer cell response data acquired under well-characterized physical conditions remain limited. We investigated clonogenic survival and relative biological effectiveness (RBE) in PANC-1 and BxPC-3 pancreatic ductal adenocarcinoma (PDAC) cells irradiated at four positions along pristine 180.1 MeV proton and 352.4 MeV/u carbon ion Bragg curves, with 4 cm spread-out Bragg peak (SOBP) irradiation included as a clinically relevant comparison. Cell plane positioning and dose were verified in a water-tank system using an Advanced Markus ionization chamber, and Monte Carlo simulations using TOPAS provided dose-averaged linear energy transfer (LET _D ) and microdosimetric quantities. RBE was calculated relative to 200 kVp X-rays using the linear-quadratic survival model. Across the sampled pristine beam positions, spanning LET _D values of approximately 1-9 keV/µm for protons and 12-163 keV/µm for carbon ions, RBE increased with LET _D . Proton RBE ₁₀ exceeded the conventional clinical value of 1.1 at distal positions, whereas carbon ion RBE ₁₀ increased from 2.3 to 5.2 in PANC-1 and from 1.3 to 3.7 in BxPC-3, with larger differences between cell lines observed near the Bragg peak. SOBP measurements showed different biological responses across field conditions despite comparable LET _D . These physically characterized survival data provide PDAC-relevant benchmarks for evaluating whether RBE models reproduce biological responses across pristine and SOBP irradiation conditions, supporting the future integration of radiation-quality– dependent effects into ion planning.

Background Chronic injuries to the scapholunate ligament (SLIL) alter carpal kinematics and may progress to early degenerative osteoarthritis. To date, there is no consensus for the best method for SLIL reconstruction. This study aims to assess the use of growth factors (bone morphogenetic protein [BMP]2 and growth and differentiation factor 5 [GDF5]) for compartmentalized regeneration of bone and ligament in this multiphasic scaffold in a rabbit knee model. Case Description A total of 100 µg of BMP2 and 30 µg of GDF5 were encapsulated into a heparinized gelatin–hyaluronic acid hydrogel and loaded into the appropriate compartment of the multiphasic scaffold. The multiphasic scaffold was implanted to replace the native rabbit medial collateral ligament (n = 16). The rabbits were randomly assigned to two different treatment groups. The first group was immobilized postoperatively with the knee pinned in flexion with K-wires for 4 weeks (n = 8) prior to sacrifice. The second group was immobilized for 4 weeks, had the K-wires removed followed by a further 4 weeks of mobilization prior to sample harvesting. Literature Review Heterotopic ossification as early as 4 weeks was noted on gross dissection and confirmed by microcomputed tomography and histological staining. This analysis revealed formation of a bony bridge located within and over the ligament compartment in the intra-articular region. Biomechanical testing showed increased ultimate force of the ligament compartment at 4 weeks postimplantation consistent with the presence of bone formation and higher numbers of scaffold failures at the bone–tendon junction. This study has demonstrated that the addition of BMP2 and GDF5 in the bone–ligament–bone (BLB) scaffold resulted in heterotopic bone formation and failure of the ligament compartment. Clinical Relevance The implantation of a three-dimensional-printed BLB scaffold alone demonstrated superior biomechanical and histological results, and further investigation is needed as a possible clinical reconstruction for the SLIL. ^* These authors contributed equally. Received: 29 August 2022 Accepted: 27 December 2022 Article published online: 28 February 2023 © 2023. Thieme. All rights reserved. Thieme Medical Publishers, Inc. 333 Seventh Avenue, 18th Floor, New York, NY 10001, USA

High-throughput microRNA sequencing was performed during differentiation of MC3T3-E1 osteoblasts to develop working hypotheses for specific microRNAs that control osteogenesis. The expression data show that miR-101a, which targets the mRNAs for the epigenetic enzyme Ezh2 and many other proteins, is highly upregulated during osteoblast differentiation and robustly expressed in mouse calvaria. Transient elevation of miR-101a suppresses Ezh2 levels, reduces tri-methylation of lysine 27 in histone 3 (H3K27me3; a heterochromatic mark catalyzed by Ezh2), and accelerates mineralization of MC3T3-E1 osteoblasts. We also examined skeletal phenotypes of an inducible miR-101a transgene under direct control of doxycycline administration. Experimental controls and mir-101a over-expressing mice were exposed to doxycycline in utero and postnatally (up to 8 weeks of age) to maximize penetrance of skeletal phenotypes. Male mice that over-express miR-101a have increased total body weight and longer femora. MicroCT analysis indicate that these mice have increased trabecular bone volume fraction, trabecular number and trabecular thickness with reduced trabecular spacing as compared to controls. Histomorphometric analysis demonstrates a significant reduction in osteoid volume to bone volume and osteoid surface to bone surface. Remarkably, while female mice also exhibit a significant increase in bone length, no significant changes were noted by microCT (trabecular bone parameters) and histomorphometry (osteoid parameters). Hence, miR-101a upregulation during osteoblast maturation and the concomitant reduction in Ezh2 mediated H3K27me3 levels may contribute to the enhanced trabecular bone parameters in male mice. However, the sex-specific effect of miR-101a indicates that more intricate epigenetic mechanisms mediate physiological control of bone formation and homeostasis.

Metal orthopedic implants are largely biocompatible and generally achieve long-term structural fixation. However, some orthopedic implants may loosen over time even in the absence of infection. In vivo fixation failure is multifactorial, but the fundamental biological defect is cellular dysfunction at the host-implant interface. Strategies to reduce the risk of short- and long-term loosening include surface modifications, implant metal alloy type, and adjuvant substances such as polymethylmethacrylate cement. Surface modifications (e.g., increased surface rugosity) can increase osseointegration and biological ingrowth of orthopedic implants. However, the localized responses of cells to implant surface modifications need to be better characterized. As an in vitro model for investigating cellular responses to metallic orthopedic implants, we cultured mesenchymal stromal/stem cells (MSCs) on clinical-grade titanium disks (Ti6Al4V) that differed in surface roughness as high (porous-structured), medium (grit-blasted), and low (bead-blasted). Topological characterization of clinically relevant Ti materials combined with differential mRNA expression analyses (RNA-seq and RT-qPCR) revealed alterations to the biological phenotype of cells cultured on titanium structures that favor early ECM production and observable responses to oxidative stress and heavy metal stress. These results provide a descriptive model for the interpretation of cellular responses at the interface between native host tissues and 3-D printed modular orthopedic implants, and will guide future studies aimed at increasing the long-term retention of such materials after TJA.

High concentrations of bone morphogenetic protein 2 (BMP2) in bone regeneration cause adverse events (e.g, heterotopic bone formation and acute inflammation). This study examines novel epigenetic strategies (i.e., EZH2 inhibition) for augmenting osteogenesis, thereby aiming to reduce the required BMP2 dose in vivo for bone regeneration and minimize these adverse effects. Human bone marrow-derived mesenchymal stem cells (BMSCs) were grown on three-dimensional (3D)-printed medical-grade polycaprolactone scaffolds and incubated in osteogenic media containing 50 ng/mL BMP2 and/or 5 μM GSK126 (EZH2 inhibitor) for 6 days ( n = 3 per group and timepoint). Constructs were harvested for realtime quantitative polymerase chain reaction analysis at Day 10 and immunofluorescence (IF) microscopy at Day 21. After pretreating for 6 days and maintaining in osteogenic media for 4 days, BMSC-seeded scaffolds were also implanted in an immunocompromised subcutaneous murine model ( n = 39; 3/group/donor and 3 control scaffolds) for histological analysis at 8 weeks. Pretreatment of BMSCs with BMP2 and BMP2/GSK126 costimulated expression of osteoblast-related genes (e.g., IBSP , SP7 , RUNX2 , and DLX5 ), as well as protein accumulation (e.g., collagen type 1/ COL1A1 and osteocalcin/ BGLAP ) based on IF staining. While in vivo implantation for 8 weeks did not result in bone formation, increased angiogenesis was observed in BMP2 and BMP2/GSK126 groups. This study finds that BMP2 and GSK126 costimulate osteogenic differentiation of MSCs on 3D scaffolds in vitro and may contribute to enhanced vascularization when implanted in vivo to support bone formation. Thus, epigenetic priming with EZH2 inhibitors may have translational potential in bone healing by permitting a reduction of BMP2 dosing in vivo to mitigate its side effects. Impact statement: While autografts are still the gold standard for bone reconstruction, tissue availability and donor morbidity are significant limitations. Previous attempts to use high concentrations of bone morphogenetic protein 2 (BMP2) have been shown to cause adverse events such as excessive bone formation and acute inflammation. Overall, the utilization of EZH2 inhibitors to modulate gene expression in favor of bone healing has been demonstrated in vitro in a tissue engineering strategy. Our study will pave the way to developing tissue engineering strategies involving GSK126 as an adjuvant to increase the effects of BMP2 for stimulating cells of interest on a three-dimensional scaffold for bone regeneration.

Scapholunate interosseous ligament tears are a common wrist injury in young and active patients that can lead to suboptimal outcomes after repair. This research aims to assess a multiphasic scaffold using 3D‐printing for reconstruction of the dorsal scapholunate interosseous ligament. The scaffold was surgically implanted in vivo in the position of the native rabbit medial collateral ligament. Two branches of treatment were implemented in the study. In the first group, the rabbits (n = 8) had the knee joint fixed in flexion for 4 weeks using 1.4 mm K‐wires prior to sample harvesting. The second group (n = 8) had the rabbit knee joint immobilized for 4 weeks prior to K‐wire removal and mobilization for an additional 4 weeks prior to sample harvesting. Overall, samples were harvested at 4 weeks post‐surgery (immobilized group) and eight weeks post‐surgery (mobilized group). Mechanical tensile testing (n = 5/group) and histology (n = 3/group) of the constructs were conducted. Tissue integration and maturation were observed resulting in increased mechanical strength of the operated joint at 8 weeks (P < .05). Bone and ligament tissues were regenerated in their respective compartments with structural and mechanical properties approaching those reported for the human dorsal SLIL ligament. Clinical Significance: This proof of concept study has demonstrated that the synthetic multiphasic scaffold was capable of regenerating both bone and ligament while also withstanding the physiological load once implanted in the rabbit knee. The artificial scaffold may provide an alternative to current techniques for reconstruction of scapholunate instability or other ligament injuries in the hand and wrist.

Background: Injuries in the musculoskeletal system, such as tendon and ligament ruptures, are challenging to manage and often require surgical reconstructions with limited long-term success. Thus, characterizations of these tissues are urgently needed to better understand cellular mechanisms that regulate tissue homeostasis and healing. Explant culturing systems allow for ex vivo analysis of tissues in an environment that mimics the native microenvironment in vivo.Methods: Collaborative efforts within our institution facilitated the establishment of a novel explant culturing system. Tissue specimens cultured in single wells, with individual applied loading and/or biological environment, allowed characterization of tissue cultured under a variety of biological loading conditions. Quantitative PCR analysis for selected gene markers was our primary outcome.Results: Data were stratified for analysis by either culture environment or loading condition. Our gene expression results show that specimens clustered by culture condition may differ in molecular markers related to ECM production (e.g., Col1a1, Adamts4) and/or organization (e.g., Tnc, Dnc). In contrast, loading condition did significantly alter the median gene expression levels of tissues in comparison to unloaded control samples, although gene expression values related to ECM degradation (e.g., Mmp1, Mmp10) were altered in tendons cultured under tension in the device.Conclusion: Our study demonstrates promising utility of a novel explant culturing system for further characterization of musculoskeletal tissues such as native tendons and ligaments, as well as pathologic fibrotic tissues resulting from arthrofibrosis or Dupuytren’s disease.