Peng Wei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Peng Wei has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
Xueping Sun
The Institute for Advanced Studies Wuhan University Wuhan Hubei China
7 shared publications- Jiantao Han
State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering
5 shared publications Chun Fang
State Key Laboratory of Material Processing and Die & Mould Technology School of Materials Science and Engineering Huazhong University of Science and Technology Wuhan Hubei 430074 P. R. China
4 shared publicationsFan Wu
School of Materials Science and Engineering Jiangsu Province Engineering Research Center of Intelligent Manufacturing Technology for the New Energy Vehicle Power Battery Changzhou University Changzhou China
4 shared publicationsShanshan Lv
School of Materials Science and Engineering Jiangsu Province Engineering Research Center of Intelligent Manufacturing Technology for the New Energy Vehicle Power Battery Changzhou University Changzhou China
4 shared publicationsYue Xu
State Key Laboratory of Material Processing and Die & Mould Technology School of Materials Science and Engineering Huazhong University of Science and Technology Wuhan Hubei 430074 P. R. China
4 shared publications
Latest Publications
- 24 August 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (9)
Research Progress of Prussian Blue Analogues and Analysis of Their Commercialization Limitations
The concept of sodium‐ion batteries (SIBs) has become a viable choice over the use of lithium‐ion batteries because of the large, available, and economical sodium resources. The three major cathode families for SIBs include layered transition‐metal oxides, polyanionic compounds, and Prussian blue analogues (PBAs), among which PBAs are widely studied because of their open framework, abundant redox sites, and low cost. Nevertheless, their practical electrochemical performance is often lower than theoretical expectations because inherent [Fe(CN) 6 ] vacancies and excess crystal water are introduced during synthesis. These structural flaws negatively impact Na + diffusion, structural reversibility, and cycling stability. This review is a systematic analysis of how vacancies and crystal water affect PBA performance, and summarizes the recent developments in crystal chemistry mechanisms, synthetic methods as well as multi‐scale modification, advanced characterization, and theoretical simulations. The advantages and disadvantages of existing modification technologies are appraised and the main research gaps in quantifying defects, unified modeling, full‐cell configuration, and industrial application are pointed out. Moreover, several future research plans are given, including machine‐learning‐based material optimization, high‐entropy PBA design, and integration with all‐solid‐state batteries.
- 24 August 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (9)
Research Progress of Prussian Blue Analogues and Analysis of Their Commercialization Limitations
The concept of sodium‐ion batteries (SIBs) has become a viable choice over the use of lithium‐ion batteries because of the large, available, and economical sodium resources. The three major cathode families for SIBs include layered transition‐metal oxides, polyanionic compounds, and Prussian blue analogues (PBAs), among which PBAs are widely studied because of their open framework, abundant redox sites, and low cost. Nevertheless, their practical electrochemical performance is often lower than theoretical expectations because inherent [Fe(CN) 6 ] vacancies and excess crystal water are introduced during synthesis. These structural flaws negatively impact Na + diffusion, structural reversibility, and cycling stability. This review is a systematic analysis of how vacancies and crystal water affect PBA performance, and summarizes the recent developments in crystal chemistry mechanisms, synthetic methods as well as multi‐scale modification, advanced characterization, and theoretical simulations. The advantages and disadvantages of existing modification technologies are appraised and the main research gaps in quantifying defects, unified modeling, full‐cell configuration, and industrial application are pointed out. Moreover, several future research plans are given, including machine‐learning‐based material optimization, high‐entropy PBA design, and integration with all‐solid‐state batteries.
- 20 April 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (28) , e73081
Active Sodium Occupancy Ratio‐A Guiding Descriptor for Predicting Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 Sodium Storage Performance
Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 (NFPP) has recently attracted extensive attention as a highly promising cathode material for sodium‐ion batteries. However, the intrinsic relationship between its local structure and electrochemical properties remains poorly understood, which is crucial for developing high‐performance NFPP. Herein, we propose and validate the Na1/Na4 occupancy ratio as a key descriptor for directly predicting electrochemical performance of NFPP. By precisely controlling the Na/Fe stoichiometric, a low Na1/Na4 occupancy ratio can be obtained, which activates dormant Na1 sites and reduces the Na + migration barrier, thereby optimizing ion‐diffusion pathways. NFPP prepared following this principle exhibits outstanding performance at Na1/Na4 ratio of 0.90, achieving a high specific capacity of 80.1 mAh g −1 at an ultra‐high rate of 50 C and retaining 85.7% of its initial capacity after 20 000 cycles. This work reveals a close correlation between the Na1/Na4 occupancy ratio and the electrochemical performance of NFPP, providing clear design guidelines for developing advanced NFPP cathodes.
- 20 April 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (28) , e73081
Active Sodium Occupancy Ratio‐A Guiding Descriptor for Predicting Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 Sodium Storage Performance
Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 (NFPP) has recently attracted extensive attention as a highly promising cathode material for sodium‐ion batteries. However, the intrinsic relationship between its local structure and electrochemical properties remains poorly understood, which is crucial for developing high‐performance NFPP. Herein, we propose and validate the Na1/Na4 occupancy ratio as a key descriptor for directly predicting electrochemical performance of NFPP. By precisely controlling the Na/Fe stoichiometric, a low Na1/Na4 occupancy ratio can be obtained, which activates dormant Na1 sites and reduces the Na + migration barrier, thereby optimizing ion‐diffusion pathways. NFPP prepared following this principle exhibits outstanding performance at Na1/Na4 ratio of 0.90, achieving a high specific capacity of 80.1 mAh g −1 at an ultra‐high rate of 50 C and retaining 85.7% of its initial capacity after 20 000 cycles. This work reveals a close correlation between the Na1/Na4 occupancy ratio and the electrochemical performance of NFPP, providing clear design guidelines for developing advanced NFPP cathodes.
- Open Access
- 2 March 2026
- Published by Wiley in Carbon Neutralization
- Vol. 5 (2)
Mitigating Jahn–Teller Distortion in LiMn 0.4 Fe 0.6 PO 4 via Hafnium Doping for Enhanced High‐Voltage Cycling Stability
Lithium manganese iron phosphate (LiMn 0.4 Fe 0.6 PO 4 , LMFP) offers a significant improvement in operating voltage and energy density compared to Li (lithium) iron phosphate (LiFePO 4 , LFP), garnering considerable research attention in recent years. However, LMFP suffers from low electronic conductivity and sluggish ion diffusion kinetics, resulting in poor performance under high current densities. Furthermore, the Jahn–Teller effect associated with Mn 3+ in LMFP leads to Mn (manganese) dissolution during electrochemical reactions, which compromises structural stability and leads to suboptimal long‐term cycling stability. In this study, a simple ball milling‐sintering method was employed to successfully incorporate Hf 4+ (Hafnium) into the transition metal sites of LMFP. The higher bond energy of Hf–O compared to Mn–O enables the construction of a stable Mn–O framework through Hf doping, thereby stabilizing the lattice structure, reducing Mn dissolution, and significantly enhancing the long‐term cycling performance of the material. Furthermore, Hf 4+ doping improves the redox reaction kinetics of the material, increasing both the lithium‐ion diffusion rate and electronic conductivity. Among the tested materials, LMFP‐3%Hf exhibited the most outstanding cycling stability (with a capacity retention rate of 89.7% after 400 cycles at 1C) and rate capability (delivering a discharge specific capacity of 70 mAh g −1 at 10C).
- 2 March 2026
- Published by Wiley in Carbon Neutralization
- Vol. 5 (2)
Open AccessMitigating Jahn–Teller Distortion in LiMn 0.4 Fe 0.6 PO 4 via Hafnium Doping for Enhanced High‐Voltage Cycling Stability
Lithium manganese iron phosphate (LiMn 0.4 Fe 0.6 PO 4 , LMFP) offers a significant improvement in operating voltage and energy density compared to Li (lithium) iron phosphate (LiFePO 4 , LFP), garnering considerable research attention in recent years. However, LMFP suffers from low electronic conductivity and sluggish ion diffusion kinetics, resulting in poor performance under high current densities. Furthermore, the Jahn–Teller effect associated with Mn 3+ in LMFP leads to Mn (manganese) dissolution during electrochemical reactions, which compromises structural stability and leads to suboptimal long‐term cycling stability. In this study, a simple ball milling‐sintering method was employed to successfully incorporate Hf 4+ (Hafnium) into the transition metal sites of LMFP. The higher bond energy of Hf–O compared to Mn–O enables the construction of a stable Mn–O framework through Hf doping, thereby stabilizing the lattice structure, reducing Mn dissolution, and significantly enhancing the long‐term cycling performance of the material. Furthermore, Hf 4+ doping improves the redox reaction kinetics of the material, increasing both the lithium‐ion diffusion rate and electronic conductivity. Among the tested materials, LMFP‐3%Hf exhibited the most outstanding cycling stability (with a capacity retention rate of 89.7% after 400 cycles at 1C) and rate capability (delivering a discharge specific capacity of 70 mAh g −1 at 10C).
- 24 February 2026
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 8 (4) , 1224-1232
Unlocking Fast-Charging and Durable Sodium-Ion Full Batteries via Entropy-Driven Coordination Regulation of Na 4 Fe 3 (PO 4 ) 2 P 2 O 7
- 24 February 2026
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 8 (4) , 1224-1232
Unlocking Fast-Charging and Durable Sodium-Ion Full Batteries via Entropy-Driven Coordination Regulation of Na 4 Fe 3 (PO 4 ) 2 P 2 O 7
- 12 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (51) , 69458-69467
High-Entropy-Driven Moderate Lattice Distortion Improves Ionic Conductivity and High-Voltage Stability of Halide Solid-State Electrolytes
Developing advanced halide solid-state electrolytes (SSEs) with both high ionic conductivity and high-voltage stability is crucial for high-energy all-solid-state batteries (ASSBs). However, conventional strategies such as simple cation substitution or anion engineering for achieving these properties simultaneously often require compromising one for the other. Herein, a high-entropy strategy is employed to design and synthesize Li3-4xIn1-6xFexYxZr2xHf2xCl6 (0 ≤ x ≤ 0.05) through multication substitution in Li3InCl6 (LIC). Li2.92In0.88Fe0.02Y0.02Zr0.04Hf0.04Cl6 (HE-LIC) featuring moderate lattice distortion achieves the highest ionic conductivity of 1.136 mS cm-1 at 25 °C and improved high-voltage stability. Based on theoretical calculations and experimental findings, the tailored distortion elongates Li1-Cl bonds (2.6616 vs 2.6531 Å in LIC) to facilitate Li+ conduction, while confining Cl- distribution to inhibit oxidation. ASSBs with HE-LIC and LiCoO2 cathode deliver a discharge capacity of 151.13 mAh g-1 and 81.17% capacity retention after 100 cycles at 0.5 C under 4.5 V. Even at 4.6 V, a discharge capacity of 165.98 mAh g-1 with 80.63% retention after 50 cycles at 0.5 C is achieved. These findings demonstrate the potential of high-entropy-driven moderate lattice distortion for advanced SSEs in high-voltage ASSBs.
- 12 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (51) , 69458-69467
High-Entropy-Driven Moderate Lattice Distortion Improves Ionic Conductivity and High-Voltage Stability of Halide Solid-State Electrolytes
Developing advanced halide solid-state electrolytes (SSEs) with both high ionic conductivity and high-voltage stability is crucial for high-energy all-solid-state batteries (ASSBs). However, conventional strategies such as simple cation substitution or anion engineering for achieving these properties simultaneously often require compromising one for the other. Herein, a high-entropy strategy is employed to design and synthesize Li3-4xIn1-6xFexYxZr2xHf2xCl6 (0 ≤ x ≤ 0.05) through multication substitution in Li3InCl6 (LIC). Li2.92In0.88Fe0.02Y0.02Zr0.04Hf0.04Cl6 (HE-LIC) featuring moderate lattice distortion achieves the highest ionic conductivity of 1.136 mS cm-1 at 25 °C and improved high-voltage stability. Based on theoretical calculations and experimental findings, the tailored distortion elongates Li1-Cl bonds (2.6616 vs 2.6531 Å in LIC) to facilitate Li+ conduction, while confining Cl- distribution to inhibit oxidation. ASSBs with HE-LIC and LiCoO2 cathode deliver a discharge capacity of 151.13 mAh g-1 and 81.17% capacity retention after 100 cycles at 0.5 C under 4.5 V. Even at 4.6 V, a discharge capacity of 165.98 mAh g-1 with 80.63% retention after 50 cycles at 0.5 C is achieved. These findings demonstrate the potential of high-entropy-driven moderate lattice distortion for advanced SSEs in high-voltage ASSBs.
- 29 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 132, 32-39
N-doped carbon nanosheets packaged ultra-small FeCoP toward efficient water splitting
- 29 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 132, 32-39
N-doped carbon nanosheets packaged ultra-small FeCoP toward efficient water splitting
- 2 April 2024
- Published by Elsevier in Chinese Chemical Letters
- Vol. 36 (4)
Research progress of high-entropy cathode materials for sodium-ion batteries
- 2 April 2024
- Published by Elsevier in Chinese Chemical Letters
- Vol. 36 (4)
Research progress of high-entropy cathode materials for sodium-ion batteries
- 1 March 2024
- Published by OOO Zhurnal Voprosy Istorii in Ooo "zhurnal "voprosy Istorii"
- Vol. 2024 (3) , 202-211
Institutional conditions of the development of Chinese entrepreneurship in the Russian Far East in the 1990s
- 1 March 2024
- Published by OOO Zhurnal Voprosy Istorii in Ooo "zhurnal "voprosy Istorii"
- Vol. 2024 (3) , 202-211
Institutional conditions of the development of Chinese entrepreneurship in the Russian Far East in the 1990s
- 6 September 2023
- Published by Scientific Journal Publishers Ltd in Social Behavior and Personality: an international journal
- Vol. 51 (9) , 1-13
The trickle-down effect of leader mindfulness on employee creative deviance behavior: A moderated mediation model
Applying social learning theory and the trickle-down effect, in this study we built a cross-level research model to explore how high-level leader mindfulness stimulates employee creative deviance behavior via the mediating effect of middle-level leader mindfulness. Using data obtained from 345 employees and 81 of their leaders in manufacturing research and development enterprises in China, our results showed that high-level leader mindfulness had a significantly positive effect on middle-level leader mindfulness. Middle-level leader mindfulness, in turn, positively affected employee creative deviance behavior and mediated the relationship between high-level leader mindfulness and employee creative deviance behavior. Further, leader???member exchange positively moderated the relationship between high-level leader mindfulness and middle-level leader mindfulness, and also moderated the indirect effect of high-level leader mindfulness on employee creative deviance through middlelevel leader mindfulness. The study findings will help organizations to understand how leader mindfulness affects employees??? creative deviance behavior and also provide practical enlightenment for enterprise innovation management.
- 6 September 2023
- Published by Scientific Journal Publishers Ltd in Social Behavior and Personality: an international journal
- Vol. 51 (9) , 1-13
The trickle-down effect of leader mindfulness on employee creative deviance behavior: A moderated mediation model
Applying social learning theory and the trickle-down effect, in this study we built a cross-level research model to explore how high-level leader mindfulness stimulates employee creative deviance behavior via the mediating effect of middle-level leader mindfulness. Using data obtained from 345 employees and 81 of their leaders in manufacturing research and development enterprises in China, our results showed that high-level leader mindfulness had a significantly positive effect on middle-level leader mindfulness. Middle-level leader mindfulness, in turn, positively affected employee creative deviance behavior and mediated the relationship between high-level leader mindfulness and employee creative deviance behavior. Further, leader???member exchange positively moderated the relationship between high-level leader mindfulness and middle-level leader mindfulness, and also moderated the indirect effect of high-level leader mindfulness on employee creative deviance through middlelevel leader mindfulness. The study findings will help organizations to understand how leader mindfulness affects employees??? creative deviance behavior and also provide practical enlightenment for enterprise innovation management.