AOAntti. E. K. Ojala

Antti. E. K. Ojala

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Antti. E. K. Ojala has a total of 134 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sediment Characteristics and Architecture of Triangular‐Shaped Murtoos: A Test of Murtoo Formation Hypotheses

    by A. E. K. Ojala, S. Soini, J. Mäkinen, J. Hovikoski, P. Sarala, A. Hepburn, K. Kajuutti, E. Ahokangas, J. Kautto

    Murtoos and murtooized terrains are new types of subglacial landforms found in the Fennoscandian Ice Sheet (FIS) and Cordilleran Ice Sheet (CIS) regions. LiDAR‐based morphometric analyses have revealed substantial morphometric diversity among murtoos and murtoo‐related landforms, while sedimentological excavations have documented a wide range of architectural elements and lithological characteristics. Most importantly, murtoos are predominately composed of silt/clay‐poor, sandy and gravelly diamictons interbedded with sorted patches of sandy and gravelly sediments. There are two prevailing hypotheses, both suggesting that murtoo formation is related to subglacial flooding episodes during deglaciation. In the FIS region, murtoo genesis has been suggested to be dominated by sediment‐concentrated flows and flooding‐induced sediment transport and liquefaction, and murtoos are considered as depositional landforms. In the CIS region, murtooized terrains are suggested to be formed by subglacial compressional deformation (glaciotectonism), as a consequence of glacial dynamic reorganization and ice flow. In the present study, we analyse and compare the sediment composition and architecture of two morphometrically similar triangular‐shaped murtoos in the FIS region in Finland, located in two different settings. The results demonstrate that murtoo internal structures vary considerably, and these variations cannot be inferred from morphometric characteristics alone. Murtoos may contain different sediment types depending on their depositional environment. They may include a high proportion of sandy to gravelly glaciofluvial sediments with upper‐flow regime (UFR) and lower‐flow regime (LFR) bedforms within their main interior, or they may consist predominately of crudely stratified sandy to gravelly diamicton deposited by subglacial slurries and forming the main sediment type of the murtoo body. The results also indicate that murtoo composition and sediment architecture are dependent on the magnitude of subglacial flooding, which largely relates to their spatial association with subglacial meltwater corridors (SMC). Neither one of the presently studied murtoos exhibits significant features of glaciotectonism, reported from the CIS region. Consequently, murtoos and murtooized terrains may represent equifinal subglacial landforms, and their interpretation requires a combination of regional geomorphological mapping and sedimentological analysis.

  • Open Access

    Making palaeoclimatology research policy‐relevant: Insights and experience from the DECADAL Project

    by Celia Martin‐Puertas, Laura Boyall, Alice M. Milner, Ashley M. Abrook, Amen Al‐Yaari, Alice Carter‐Champion, Daisy Fallows, Katy Flowers, Paul Lincoln, Simon Blockley, et al.

    Quaternary palaeoclimatology uniquely provides insights and new evidence about climate variability trends and extremes prior to the instrumental record; yet, its knowledge is rarely integrated into governmental decision‐making. This opinion piece shares lessons and experience from the UKRI‐funded DECADAL project, which bridges palaeoclimate science and policy through co‐production with UK climate services and policy institutions. The views expressed represent a joint perspective of the academic and non‐academic actors involved in the project, highlighting the challenges that we faced and the solutions that we adopted. We found that an iterative collaboration through aligning research questions, outputs and formats with user needs builds trust, increases relevance and creates pathways for long‐term policy uptake. DECADAL demonstrates that engaging with relevant policy and other end‐user groups does not compromise scientific excellence; rather, it drives methodological innovation and rigour, fosters creativity and produces high‐impact, original publications that also have relevance beyond an academic audience. We argue that embedding policy engagement should be viewed as a collective community endeavour rather than the effort of an individual or research team. By embracing co‐production, palaeo‐scientists can strengthen the societal value of their research, open new avenues for innovation and collaboration, and collectively shape climate‐informed decision‐making.


  • Open Access

    Recognizing bedrock deformation zones through integrated 3D modelling of bedrock topography and sedimentary deposits, Turku, SW Finland

    by Kati M. Ahlqvist, Pietari Skyttä, Noora Anttila, Antti E.K. Ojala, Eemi Ruuska

    Urban development along the Baltic Sea coast requires high-resolution subsurface information to support effective planning and construction. This study presents a 3D geological model of the subsurface in the City of Turku, SW Finland, based on selected geotechnical investigations, Quaternary superficial deposit maps and LiDAR data. The model comprises three components essential for engineering geological assessments: a digital elevation model of the bedrock surface, the distribution and thickness of coarse grained glacial sediments, and the overlying fine-grained clay deposits. A major part of the analysis focuses on the bedrock surface, which shows a complex and heterogeneous topography shaped by several sets of deformation zones. These structures form linear valley-like depressions that strongly influence the geometry of sedimentary basins and the thickness patterns of both coarse- and fine-grained deposits. The integrated model reveals previously undescribed deformation‑zone geometries, including a continuous NE–SW‑trending system and subsidiary structures, providing new insights into the brittle architecture of the Turku bedrock. The result show how bedrock-controlled depressions have guided sediment accumulation and produced characteristic basin-fills relevant for engineering evaluations. In addition to characterizing the deformation zone framework, the 3D model provides region-wide outputs, including bedrock elevation variations, sediment thickness patterns and the spatial distribution of superficial deposits. These results demonstrate that existing geotechnical investigations, when carefully selected, can effectively support high-resolution subsurface modelling in dense urban environments. When data coverage is limited, additional geotechnical investigations and geophysical surveys are recommended to improve model reliability.


  • Open Access

    Unlocking varve details: high-resolution sampling via freeze-melt technique

    by Antti E. K. Ojala, François Lapointe, Emilia Kosonen

    Sediment archives, and especially annually laminated sediments, can provide valuable records of past climate and environmental change. However, the extraction of high-resolution sub-millimetre (seasonal to annual) and uncontaminated discrete subsamples from fresh sediment cores has proven difficult, time-consuming and labour-intensive. Obtaining such samples is essential for determining the relationship between measurable sediment proxies and specific climate variables, as well as for the quantification of paleoproxies. In this technical note we present a freeze-melt technique for a high-resolution subsampling of sediment sequences. This method is based on freezing and melting of fresh sediments to obtain very thin discrete subsamples. We provide details of the method and application examples using two case studies ( 10 Be, 137 Cs) with clastic-biogenic varves from lakes Nautajärvi and Ristijärvi in Finland. We discuss the potential advantages of the method, as well as risks and limitations that need to be considered.

  • Open Access

    The Role of Summer Temperature on Aquatic Insect Diversity at Multi‐Decadal Scales Within the Holocene

    by Ashley M. Abrook, Peter G. Langdon, Gordon N. Inglis, Achim Brauer, Paul Lincoln, Roseanna Mayfield, Antti E. K. Ojala, Celia Martin‐Puertas

    Future anthropogenic warming is suggested to have major impacts on global biodiversity, with freshwater ecosystems particularly under threat. Understanding the role of temperature in impacting freshwater biodiversity is therefore of paramount importance. Previous research suggested that temperature has a limited influence on freshwater diversity across the Holocene. However, this is mostly based on data resolved at centennial to millennial scales, and it is therefore unknown whether freshwater diversity responds similarly over shorter (decadal/multi‐decadal) timescales. We present aquatic insect (Chironomidae) summer temperature reconstructions and key diversity metrics (α‐diversity, β‐diversity, and network skewness) from three annually laminated lacustrine records from Europe (Diss Mere, UK; Nautajärvi, Finland; and Meerfelder Maar, Germany) across the Holocene, including multi‐decadal resolutions within the Holocene Thermal Maximum (HTM) to test this. Our results reveal three major findings with both spatial and temporal elements: (1) At regional (European) scales, using all available data, there is a significant decline in all three diversity metrics with increased summer temperature; (2) at local multi‐decadal scales across the HTM, in the absence of additional major land‐use and eutrophication drivers, summer temperature has only a minor control on aquatic insect diversity (with the exception of a proposed cooling between 6.2 and 5.9 ka BP); and (3) at local low‐frequency timescales, we find a similar relationship, albeit with warm temperatures appearing to promote assemblage stability. As such, temperature and diversity relationships are complex and non‐linear through time and space. We argue that understanding variability in aquatic insect diversity across different temporal and spatial scales is important to consider when assessing the potential for future biodiversity changes under warming climatic regimes in the coming decades.


  • Open Access

    De Geer moraine internal architecture based on sedimentological and geophysical investigations and implications for ice‐marginal reconstructions

    by Gwyneth E. Rivers, Robert D. Storrar, Antti E. K. Ojala, Joni Mäkinen, Camilla Holmroos, Naomi Holmes

    De Geer moraines (DGMs) may act as valuable ice margin indicators; however, to date, their variable mode of formation has presented challenges for this utility. Morphometric investigations provide useful insights into formation processes, which can be developed using sedimentological and geophysical methods. Here we present sedimentological and ground penetrating radar (GPR) data of DGMs located in southwest Finland. Individual lithofacies were identified and interpreted using sediment architectural elements. These were correlated with neighbouring GPR radargrams and extrapolated across the wider study area. Generally, internal architecture presents a multi‐phase structure with lower units representing subglacial traction till and ice margin infill deposits, truncated by a larger prominent push unit, which is then successively deformed via the overriding of active ice. Significantly, there are notable differences between proximal and distal structures, with proximal sides characterized by silts, clays, and diamicton with laminae, stratification and thrust planes, and distal sides characterized by poorly consolidated diamicton and proglacial water current reworkings. Internal architecture of both prominent and intermediate ridges is very similar, reflecting similar formation processes, however, slight differences also reflect inter‐seasonal variations. Based on our findings, we present an integrated conceptual model for the genesis of DGMs whereby inter‐seasonal ridge forming processes occur within a sub‐aqueous ice‐marginal environment. Our model highlights that DGMs can be subcategorized as: (i) sediment deposition at an unstable margin during summer calving, and/or (ii) sediment pushing at a stabilized margin during a winter re‐advance. We do not find evidence of crevasse filling as a mechanism for DGM formation. We propose a landform assemblage classification whereby ‘De Geer terrain’ is used to describe series of parallel ridges arranged in a typical washboard‐like configuration. This classification identifies all DGMs derived within a sub‐aqueous ice‐marginal environment, whilst also capturing the equifinal characteristics between individual landforms.


  • Open Access

    Statistical approach to identify variables predicting sulphide clay occurrence in southern Finland

    by Maarit Saresma, Monica Löfman, Emilia Kosonen, Antti E. K. Ojala, Leena Korkiala-Tanttu

    Acid sulphate soil and sulphide-bearing sediments cause various challenges in construction projects and land use planning, as well as harmful environmental effects. Fine-grained sulphide sediments were mainly formed in coastal areas during the Litorina Sea water phase at approximately 7000 BP in the capital region of Finland, but not all these sediments contain sulphide clay. In this study, environmental and material property variables related to the depositional conditions of sulphide clay were selected for statistical analyses to find their association with the occurrence of sulphide. The datasets consisted of sulphide investigations by the City of Espoo, the City of Helsinki, and the Geological Survey of Finland. Statistically significant associations were found in the study area between the occurrence of sulphide and enumerative variables (i.e., sediment organic content, total clay depth, topographic class in the Litorina Sea phase, and water depth) in the Litorina Sea phase. Locations where sulphide clay is especially likely to occur consist of organic-rich (≥ 2%) thick clay (≥ 15 m) deposits in a topographically narrow depression with deep Litorina water (≥ 30 m), or where there is a moderate depth clay (3–5 m) in a local depression with shallow Litorina water (10–20 m). The best individual predictor for sulphide clay occurrence in the study area was found to be the sediment organic content, and, together with sediment water content, these variables very accurately predicted the occurrence of sulphide clay. In addition, clay depth is a very good predictor and, together with the topographic class narrow depression and the Litorina water depth or current elevation, can be used to predict sulphide occurrence.


  • Open Access

    High-resolution ∼55 ka paleomagnetic record of Biển Hồ maar lake sediment from Vietnam in relation to detailed 14C and 137Cs geochronologies

    by Antti E.K. Ojala, Hướng Nguyễn-Văn, Ingmar Unkel, Dương Nguyễn-Thùy, Thái Nguyễn-Đình, Quốc Đỗ-Trọng, Chunqing Sun, Peter E. Sauer, Arndt Schimmelmann


  • Open Access

    Subglacial evolution from distributed to channelized drainage: Evidence from the Lake Murtoo area in SW Finland

    by Antti E. K. Ojala, Joni Mäkinen, Kari Kajuutti, Elina Ahokangas, Jukka‐Pekka Palmu

    During the last millennia of the Weichselian glaciation (c. 11 700–14 000 cal BP) and the first millennium of the Holocene interglacial (c. 10 500–11 700 cal BP), melting of the ice sheet and subsequent subglacial drainage resulted in the formation of murtoos and murtoo‐related landforms in the Fennoscandian Ice Sheet area in Finland and Sweden. Murtoos are composed of clay‐poor diamictons produced by sediment‐concentrated creep and material sorting in a subglacial environment under effective pressure close to zero, and potentially represent a transition form from non‐channelized to channelized subglacial drainage networks. Here, we explore the geomorphology and substratum characteristics of the Lake Murtoo area, one of the locations where murtoos were initially found and described in SW Finland. Our interpretation suggests an interconnected development from inefficient distributed or semi‐distributed cavities (murtoos) to efficient channelized drainage (esker) via erosional escarpments, all displayed in the same region. In addition, our excavation into a murtoo‐related erosional escarpment (MRE) revealed subglacial erosional channels alongside MREs that were filled with fine‐grained finely laminated sediments. We suggest that these channel fill sediments were deposited subglacially, because they are covered by flow till and show spatial and lithological characteristics that deviate significantly from the proglacial basin fill clay (varve) sediments in the area. The appearance of rhythmically laminated silt and clay sediments indicates sedimentation in a suspension‐load‐dominated environment in shallow subglacial channels with relatively low (but repetitiously changing) water flow velocities, possibly reflecting disconnected spill‐over routes of subglacial drainage in small tributaries that were only periodically used due to water pressure changes in the up‐ice direction.


  • Open Access

    Traces of sunlight in the organic matter biogeochemistry of two shallow subarctic lakes

    by Marttiina V. Rantala, Carsten Meyer-Jacob, E. Henriikka Kivilä, Tomi P. Luoto, Antti. E. K. Ojala, John P. Smol, Liisa Nevalainen

    Global environmental change alters the production, terrestrial export, and photodegradation of organic carbon in northern lakes. Sedimentary biogeochemical records can provide a unique means to understand the nature of these changes over long time scales, where observational data fall short. We deployed in situ experiments on two shallow subarctic lakes with contrasting light regimes; a clear tundra lake and a dark woodland lake, to first investigate the photochemical transformation of carbon and nitrogen elemental (C/N ratio) and isotope (δ13C, δ15N) composition in lake water particulate organic matter (POM) for downcore inferences. We then explored elemental, isotopic, and spectral (inferred lake water total organic carbon [TOC] and sediment chlorophyll a [CHLa]) fingerprints in the lake sediments to trace changes in aquatic production, terrestrial inputs and photodegradation before and after profound human impacts on the global carbon cycle prompted by industrialization. POM pool in both lakes displayed tentative evidence of UV photoreactivity, reflected as increasing δ13C and decreasing C/N values. Through time, the tundra lake sediments traced subtle shifts in primary production, while the woodland lake carried signals of changing terrestrial contributions, indicating shifts in terrestrial carbon export but possibly also photodegradation rates. Under global human impact, both lakes irrespective of their distinct carbon regimes displayed evidence of increased productivity but no conspicuous signs of increased terrestrial influence. Overall, sediment biogeochemistry can integrate a wealth of information on carbon regulation in northern lakes, while our results also point to the importance of considering the entire spectrum of photobiogeochemical fingerprints in sedimentary studies.