DGDaqin Guan

Daqin Guan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daqin Guan has a total of 153 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bidirectional Sulfur Redox Regulation Enabling Ultra‐Stable High‐Sulfur‐Loading All‐Solid‐State Lithium‐Sulfur Batteries

    by Hanwen Liu, Leqi Zhao, Yu‐Cheng Huang, Daqin Guan, Yijun Zhong, Xiaomin Xu, Zongping Shao

    All‐solid‐state lithium‐sulfur batteries are promising for high‐energy storage but are limited by sluggish sulfur redox and poor cycling stability. Herein, we design a new amorphous‐crystalline Li 6.05 P 0.95 Nb 0.05 S 5 Cl 0.8 I 0.2 electrolyte that reconstructs interfacial Li + transport and enables bidirectional regulation of sulfur redox. The amorphous structure improves solid‐solid contact and creates additional continuous Li + pathways around sulfur, while the crystal framework maintains fast Li + ion‐conducting channels. During the discharge, we further uncover an Nb reduction mechanism in which Nb 4+ is reduced to Nb 3+ , generating Li‐rich sites that promote Li 2 S nucleation and sulfur reduction. During the charge, I − is oxidized to I 2 , which acts as the redox mediator for Li 2 S oxidation, while I 3 − formation helps stabilize unconsumed I 2 . This bidirectional regulation enables 84.2% sulfur utilization at a high sulfur loading of 6 mg cm − 2 and retains 736 mAh g − 1 with 93.1% capacity retention after 1500 cycles at 0.5 C. These findings provide a mechanistic strategy for high‐sulfur‐loading all‐solid‐state Li‐S batteries.

  • Open Access

    Bidirectional Sulfur Redox Regulation Enabling Ultra‐Stable High‐Sulfur‐Loading All‐Solid‐State Lithium‐Sulfur Batteries

    by Hanwen Liu, Leqi Zhao, Yu‐Cheng Huang, Daqin Guan, Yijun Zhong, Xiaomin Xu, Zongping Shao

    All‐solid‐state lithium‐sulfur batteries are promising for high‐energy storage but are limited by sluggish sulfur redox and poor cycling stability. Herein, we design a new amorphous‐crystalline Li 6.05 P 0.95 Nb 0.05 S 5 Cl 0.8 I 0.2 electrolyte that reconstructs interfacial Li + transport and enables bidirectional regulation of sulfur redox. The amorphous structure improves solid‐solid contact and creates additional continuous Li + pathways around sulfur, while the crystal framework maintains fast Li + ion‐conducting channels. During the discharge, we further uncover an Nb reduction mechanism in which Nb 4+ is reduced to Nb 3+ , generating Li‐rich sites that promote Li 2 S nucleation and sulfur reduction. During the charge, I − is oxidized to I 2 , which acts as the redox mediator for Li 2 S oxidation, while I 3 − formation helps stabilize unconsumed I 2 . This bidirectional regulation enables 84.2% sulfur utilization at a high sulfur loading of 6 mg cm − 2 and retains 736 mAh g − 1 with 93.1% capacity retention after 1500 cycles at 0.5 C. These findings provide a mechanistic strategy for high‐sulfur‐loading all‐solid‐state Li‐S batteries.

  • Open Access

    Coupled spin-coordination self-adaptation drives efficient nitrate to ammonia conversion

    by Chun-Kuo Peng, Yu-Ru Lin, Hsiang-Chun Yu, Shih-Ching Huang, Yu-Chang Lin, Daqin Guan, Xiaomin Xu, Yingtang Zhou, Yung-Jung Hsu, San-Yuan Chen, et al.

    Electrochemical nitrate reduction reaction (NO 3 RR) is a promising approach for sustainable ammonia production and nitrogen pollution mitigation, but its efficiency is often limited by sluggish nitrate hydrogenation. The spin state and coordination environment of the active metal play crucial roles in selectivity and reaction kinetics, yet designing electronically adaptive active sites for the complex multielectron NO 3 RR process remains challenging. Here, we report an Fe-N 3 (PO X ) single-atom catalyst that breaks the local symmetry to induce a switch-like adaptive coordination and dynamical tuning of the Fe spin state, enabling high activity at low overpotentials, with an ammonia yield rate of 21.96 g mg Fe −1 h −1 and a Faradaic efficiency of 89.8% at −0.56 V versus the reversible hydrogen electrode (RHE). In situ spectroscopy confirms coordination reorganization and an increase in the Fe spin state, accompanied by accelerated consumption of asymmetric nitrate species. The resulting higher spin state character enhances back-donation into nitrate-derived intermediates and accelerates hydrogenation. This study demonstrates a viable strategy to manipulate spin states at the single-atom level, providing mechanistic insight for optimizing ammonia production on Fe-based catalysts.

  • Nano‐Particulate Surface Pinning of CeO 2 Enables Durable High‐Voltage Lithium‐Ion Batteries

    by Zezhou Lin, Zhihang Xu, Yiran Ying, Gao Chen, Xi Gong, Daqin Guan, Yanhao Ren, Honglei Zhang, Xiao Sun, Zhaowen Bai, et al.

    Elevating the cut‐off voltage of LiCoO 2 (LCO) cathode in lithium‐ion batteries (LIBs) enhances capacity but increases structural instability. While surface coatings are used to mitigate structural degradation at high voltages, conventional full coverage coatings often fail to withstand the cyclic mechanical stress, resulting in crack formation and performance decay. Here, a multifunctional CeO 2 nanoparticle (NP) pinning structure is designed as a surface coating on LCO (LCO@CeO 2 ) to enable stable operation at a high cut‐off voltage of 4.6 V (vs Li/Li + ). This surface pinning architecture balances structural integrity with minimal inactive material usage. The CeO 2 NPs are strategically anchored to the LCO surface, creating a pinning structure that accommodates volume changes and suppresses fracture formation in the cathode. Moreover, the CeO 2 ‐mediated fast Li + transport pathways are established, improving high‐rate capability. The interspersed CeO 2 NPs also act as oxygen reservoirs, stabilizing reversible (O 2 ) 3− species during high‐voltage oxygen anionic redox reactions. Consequently, the optimized LCO@CeO 2 cathode achieves a capacity retention of 85.3% after 500 cycles at 1C and a high‐rate capacity of 124.8 mAh g −1 at 10C. This CeO 2 NP pinning structure offers a novel practical strategy for designing durable high‐voltage layered cathodes.


  • Open Access

    Interfacial oxide wedging for mechanical-robust electrode in high-temperature ceramic cells

    by Yuan Zhang, Zhipeng Liu, Junbiao Li, Kuiwu Lin, Daqin Guan, Yufei Song, Guangming Yang, Wei Zhou, Jingjie Ge, Minhua Shao, et al.

    Delamination and cracking of air electrodes are two mechanical causes to the degradation of high-temperature electrochemical ceramic cells. While compositing negative thermal expansion (NTE) materials can tackle delamination by lowering the thermal expansion coefficient (TEC) of air electrode, it can exacerbate cracking due to large thermal stress between particles of NTE and positive thermal expansion perovskites (PTE). Here, we introduce interfacial oxides to “wedge” the NTE-PTE interface, thereby resisting cracking inside the bulk of the air electrode through reactive calcination at near-melting temperatures. This concept is demonstrated by compositing negative thermal expansive HfW2O8 with Ba0.5Sr0.5Co0.8Fe0.2O3–δ (perovskite), forming Co3O4, Fe3O4, BaHfO3 and Sr3WO6 as wedging phases. Enhanced bulk modulus (by 102%), hardness (by 138%), and mitigated TEC (reduced by 35%) are simultaneously achieved, which enhances the durability of the air electrode over 40 rigorous thermal cycles between 600 °C and 300 °C, and even with no decay after two years of exposure to ambient air. This method offers an effective strategy for developing mechanical-robust electrodes of high-temperature electrochemical cells.


  • Self-Optimized Interfacial Co–O–Ru Motifs of Hollow Nanotube Composites Trigger Interfacial Lattice Oxygen Participation and Diffusion

    by Haijuan Zhang, Hengyue Xu, Jie Chen, Daqin Guan, Zhiwei Hu, Xiaomin Xu, Zezhou Lin, Hainan Sun, Xiao Sun, Jiayi Tang, et al.

    Lattice oxygen participation mechanism (LOM) can break the conventional adsorption scaling limitations to boost electrocatalysis performance and has been utilized to design promising single-phase oxides that generally show favorable bulk oxygen-ion diffusion capability. In pure-phase materials, bulk oxygen vacancies could act as oxygen-ion diffusion channels, implying rich bulk oxygen vacancies at the interfaces of hybrid-phase composites may further boost LOM. Here, by designing hybrid Co2.5Ru0.5Ox hollow nanotubes with rich two-phase interfaces, we report a phenomenon of interfacial LOM. Such hollow nanotubes (∼10 nm wall thickness), composed of spinel Co3O4-x-rutile RuO2-x interfaces, exhibiting a low overpotential of 430 mV and a long-term stability of 1000 h at 500 mA cm-2 for oxygen-evolving reaction (OER) in near-industrial alkaline solutions (6 M KOH). The constructed anion exchange membrane electrolyzer requires only 1.82 V to achieve a 1 A cm-2. Interfacial Co/Ru atomic interactions trigger Co-O-Ru motifs to undergo self-optimization during OER through oxidizing Co/Ru ions and narrowing bond length to create short synergetic active sites, while interfacial oxygen vacancies act as ion-diffusion pathways. Combined mechanism experiments and computations unravel the exceptional interfacial LOM processes. Additionally, the hollow nanotube structure promotes OH- adsorption, serving as a beneficial driving force for interfacial LOM.


  • Optimizing the Ru Catalyst–Support Interaction via Tunnel Size of MnO2 Support for Enhanced Acidic Water Oxidation

    by Sixuan She, Changsheng Chen, Ke Fan, Gao Chen, Yanping Zhu, Daqin Guan, Yu-Cheng Huang, Hsiao-Chien Chen, Zezhou Lin, Hon Fai Wong, et al.

    Metal-support interaction (MSI) has profound impacts on the catalytic performance of heterogeneous catalysts. Rational modulation of MSI will give rise to unusually high activity and stability. Here, we demonstrate that the MSI strength can be effectively tuned by the tunnel size of MnO2 supports to help address the two fundamental challenges in Ru-based acidic oxygen evolution reaction (OER): the sluggish kinetics and the instability of Ru sites. Through crystallographic engineering from α-MnO2 to β-MnO2 polymorphs, we found that the reduced tunnel size of MnO2 increases planar oxygen (Opla) concentration and promotes the formation of strong Ru-Opla-Mn bonds, thereby enhancing the Ru/MnO2 interactions. However, an excessively small tunnel size in β-MnO2 leads to surface amorphization and elongated Ru-Opla-Mn bonds after Ru incorporation, thus reversely weakening the Ru/MnO2 interactions. Our work manifests distinct volcano-shaped dependencies for both MSI strength and OER activity as a function of the tunnel size of MnO2 supports. The optimized Ru-γ-MnO2 catalyst, featuring an intermediate tunnel size and the strongest MSI, achieves an exceptional mass activity (1743 A g-1 at 1.5 V) while maintaining a high stability. Our results suggest that strong Ru-Opla-Mn interactions promote the formation of the OOH* intermediate through high Ru-O covalency and stabilize reactive Ru species against dissolution through double-exchange charge transfer from low-valence Mn sites. These findings offer valuable insights into the modulation of MSI via structural design of support for the optimization of other supported catalysts.


  • Operando Studies Redirect Spatiotemporal Restructuration of Model Coordinated Oxides in Electrochemical Oxidation

    by Daqin Guan, Hengyue Xu, Yu‐Cheng Huang, Chao Jing, Yoshihiro Tsujimoto, Xiaomin Xu, Zezhou Lin, Jiayi Tang, Zehua Wang, Xiao Sun, et al.

    Tetrahedral, pyramidal, and octahedral metal‐oxygen coordinated ligands are fundamental components in all metal‐oxide structures. Understanding the impacts of their spatiotemporal behaviors during electrochemical oxidation is crucial for diverse applications, yet remains unsolved due to challenges in designing model oxides and conducting operando characterizations. Herein, combining a suite of advanced operando characterizations and systematic computations, a link between oxygen‐evolving performance and operational structural properties is established on model oxides. Compared with tetrahedral and octahedral structures, pyramidal structure is more susceptible to OH− attack due to its pristine unsaturated and asymmetric features and constant single‐electron occupancy on the active z2 orbital during reaction, leading to surface‐to‐bulk restructuration into active amorphous high‐valence CoOOHx with edge‐sharing configurations. This is accompanied by ion leaching to create nanoscale space, following a leaching tendency of Sr2+ > Ba2+ > La3+ > Y3+. Operando soft X‐ray absorption spectroscopy demonstrates a harder non‐uniform dehydrogenation process over time (Co3+OOH → Co3+/4+OOHx → Co4+OO) because of the enhanced CoO covalency with higher energy barriers. Lattice oxygen participates in active CoOOHx formation but sacrifices stability. To address this activity‐stability trade‐off, an ion‐tuning strategy is proposed to simultaneously enhance both activity and stability in electrode and device.


  • Deciphering the Nitrogen Activation Mechanisms on Group VIII Single Atoms at MoS2

    by Hengyue Xu, Fupeng Zhang, LiuRu Fang, Yiqi Xu, Zhi-Wu Yu, Lan Ma, Daqin Guan, Zongping Shao

    The activation of nitrogen (N2) is vital for sustainable ammonia production and nitrogen fixation technologies. This study employs density functional theory (DFT) to investigate the nitrogen activation and reduction capabilities of Group VIII single-atom catalysts anchored on MoS2. Among these, osmium anchored on MoS2 (Os@MoS2) emerged as the most promising catalyst, exhibiting the highest N2 activation and the lowest nitrogen reduction reaction (NRR) overpotential (0.624 V). A pronounced "electron drift" effect was observed for Os@MoS2, leading to significant charge redistribution that weakens the N ≡ N triple bond, facilitating its activation. The N-N dissociation energy barrier at the *N-NH2 intermediate was calculated to be only 0.82 eV, confirming Os@MoS2's superior catalytic efficiency. Detailed analyses, including electrostatic potential maps, electron localization functions, spin density, and charge transfer, revealed the pivotal role of orbital interactions in driving N2 activation. Interestingly, the trends in adsorbed N2 bond energies and NRR overpotentials showed a consistent diagonal pattern across the Group VIII catalysts, emphasizing the importance of electronic and geometric factors. This work offers valuable insights into nitrogen activation mechanisms and provides a framework for designing efficient catalysts, highlighting Os@MoS2's potential in sustainable ammonia synthesis.


  • Top Cited Papers
    Open Access

    Synergistic dual-phase air electrode enables high and durable performance of reversible proton ceramic electrochemical cells

    by Zuoqing Liu, Yuesheng Bai, Hainan Sun, Daqin Guan, Wenhuai Li, Wei-Hsiang Huang, Chih-Wen Pao, Zhiwei Hu, Guangming Yang, Yinlong Zhu, et al.

    Reversible proton ceramic electrochemical cells are promising solid-state ion devices for efficient power generation and energy storage, but necessitate effective air electrodes to accelerate the commercial application. Here, we construct a triple-conducting hybrid electrode through a stoichiometry tuning strategy, composed of a cubic phase Ba0.5Sr0.5Co0.8Fe0.2O3−δ and a hexagonal phase Ba4Sr4(Co0.8Fe0.2)4O16−δ. Unlike the common method of creating self-assembled hybrids by breaking through material tolerance limits, the strategy of adjusting the stoichiometric ratio of the A-site/B-site not only achieves strong interactions between hybrid phases, but also can efficiently modifies the phase contents. When operate as an air electrode for reversible proton ceramic electrochemical cell, the hybrid electrode with unique dual-phase synergy shows excellent electrochemical performance with a current density of 3.73 A cm−2 @ 1.3 V in electrolysis mode and a peak power density of 1.99 W cm−2 in fuel cell mode at 650 °C.