Chiara Molinari
Research Subjects
Chiara Molinari has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Chiara Zanelli
9 shared publicationsGuia Guarini
7 shared publications- Michele Dondi
CNR-ISTEC Istituto di Scienza e Tecnologia dei Materiali Ceramici, Faenza, Italy
7 shared publications Sonia Conte
6 shared publicationsMichele Dondi
4 shared publications- Sonia Conte
CNR-ISSMC, Institute of Science, Technology and Sustainability for the Development of Ceramic Materials, via Granarolo 64, I-48018 Faenza, Italy
3 shared publications
Latest Publications
- Open Access
- 22 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (15) , 27643-27652
Viscosity of aluminosilicate melts and glasses: Rapid measurement by hot stage microscopy
- 22 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (15) , 27643-27652
Open AccessViscosity of aluminosilicate melts and glasses: Rapid measurement by hot stage microscopy
- Open Access
- 15 July 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (25) , 43796-43805
Zeolites as ceramic raw materials: chabazite-rich tuff as potential substitute for feldspars in porcelain stoneware tiles production
- 15 July 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (25) , 43796-43805
Open AccessZeolites as ceramic raw materials: chabazite-rich tuff as potential substitute for feldspars in porcelain stoneware tiles production
- Open Access
- 11 September 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (22) , 46157-46165
Compositional diversity of vitrified silicate ceramics: Delimiting the chemical perimeter of industrial bodies
- 11 September 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (22) , 46157-46165
Open AccessCompositional diversity of vitrified silicate ceramics: Delimiting the chemical perimeter of industrial bodies
- Open Access
- 5 August 2024
- Published by Elsevier in Open Ceramics
- Vol. 19
Residues from beneficiation of granite in porcelain stoneware: Effects on technological properties
- 5 August 2024
- Published by Elsevier in Open Ceramics
- Vol. 19
Open AccessResidues from beneficiation of granite in porcelain stoneware: Effects on technological properties
- Open Access
- 23 April 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (14) , 25228-25240
Effect of milling and compaction on sintering of porcelain stoneware tiles
- 23 April 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (14) , 25228-25240
Open AccessEffect of milling and compaction on sintering of porcelain stoneware tiles
- Open Access
Porcelain versus Porcelain Stoneware: So Close, So Different. Sintering Kinetics, Phase Evolution, and Vitrification Paths
Five porcelain and porcelain stoneware bodies were investigated to compare sintering mechanisms and kinetics, phase and microstructure evolution, and high temperature stability. All batches were designed with the same raw materials and processing conditions, and characterized by optical dilatometry, XRF, XRPD-Rietveld, FEG-SEM and technological properties. Porcelain and porcelain stoneware behave distinctly during sintering, with the convolution of completely different phase evolution and melt composition/structure. The firing behavior of porcelain is essentially controlled by microstructural features. Changes in mullitization create conditions for a relatively fast densification rate at lower temperature (depolymerized melt, lower solid load) then to contrast deformations at high temperature (enhanced effective viscosity by increasing solid load, mullite aspect ratio, and melt polymerization). In porcelain stoneware, the sintering behavior is basically governed by physical and chemical properties of the melt, which depend on the stability of quartz and mullite at high temperature. A buffering effect ensures adequate effective viscosity to counteract deformation, either by preserving a sufficient skeleton or by increasing melt viscosity if quartz is melted. When a large amount of soda–lime glass is used, no buffering effect occurs with melting of feldspars, as both solid load and melt viscosity decrease. In this batch, the persistence of a feldspathic skeleton plays a key role to control pyroplasticity.
Open AccessPorcelain versus Porcelain Stoneware: So Close, So Different. Sintering Kinetics, Phase Evolution, and Vitrification Paths
Five porcelain and porcelain stoneware bodies were investigated to compare sintering mechanisms and kinetics, phase and microstructure evolution, and high temperature stability. All batches were designed with the same raw materials and processing conditions, and characterized by optical dilatometry, XRF, XRPD-Rietveld, FEG-SEM and technological properties. Porcelain and porcelain stoneware behave distinctly during sintering, with the convolution of completely different phase evolution and melt composition/structure. The firing behavior of porcelain is essentially controlled by microstructural features. Changes in mullitization create conditions for a relatively fast densification rate at lower temperature (depolymerized melt, lower solid load) then to contrast deformations at high temperature (enhanced effective viscosity by increasing solid load, mullite aspect ratio, and melt polymerization). In porcelain stoneware, the sintering behavior is basically governed by physical and chemical properties of the melt, which depend on the stability of quartz and mullite at high temperature. A buffering effect ensures adequate effective viscosity to counteract deformation, either by preserving a sufficient skeleton or by increasing melt viscosity if quartz is melted. When a large amount of soda–lime glass is used, no buffering effect occurs with melting of feldspars, as both solid load and melt viscosity decrease. In this batch, the persistence of a feldspathic skeleton plays a key role to control pyroplasticity.
- 1 January 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 332
Use of screen glass and polishing sludge in waste-based expanded aggregates for resource-saving lightweight concrete
- 1 January 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 332
Use of screen glass and polishing sludge in waste-based expanded aggregates for resource-saving lightweight concrete
- Open Access
- 1 June 2021
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 14
Effect of scale-up on the properties of PCM-impregnated tiles containing glass scraps
- 1 June 2021
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 14
Open AccessEffect of scale-up on the properties of PCM-impregnated tiles containing glass scraps
- 1 December 2019
- Vol. 88 (3) , 235-257
Deposits, composition and technological behavior of fluxes for ceramic tiles
- 1 December 2019
- Vol. 88 (3) , 235-257
Deposits, composition and technological behavior of fluxes for ceramic tiles
- Open Access
- 1 September 2019
- Published by Elsevier in Boletín de la Sociedad Española de Cerámica y Vidrio
- Vol. 58 (5) , 199-210
Recycling of residual boron muds into ceramic tiles
- 1 September 2019
- Published by Elsevier in Boletín de la Sociedad Española de Cerámica y Vidrio
- Vol. 58 (5) , 199-210
Open AccessRecycling of residual boron muds into ceramic tiles