Jasper Deckers
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jasper Deckers has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Wouter Maes
Hasselt University, Institute for Materials Research (imo-imomec), Design & Synthesis of Organic Semiconductors (DSOS), Martelarenlaan 42, B-3500 Hasselt, Belgium
10 shared publications - Tom Cardeynaels
Hasselt University, Institute for Materials Research (IMO-IMOMEC), Design & Synthesis of Organic Semiconductors (DSOS), Agoralaan 1, 3590 Diepenbeek, Belgium
8 shared publications - Benoît Champagne
Theoretical Chemistry Laboratory Unit of Theoretical and Structural Physical Chemistry NISM (Namur Institute of Structured Matter) University of Namur (UNamur) B‐500 Namur Belgium
7 shared publications - Dirk Vanderzande
Hybrid Materials Design, Institute for Materials Research (imo-imomec), Hasselt University, Martelarenlaan 42, B-3500 Hasselt, Belgium
5 shared publications - Andrew Danos
Durham University
3 shared publications - Andrew P. Monkman
Department of Physics Durham University Durham UK
3 shared publications
Latest Publications
- Open Access
- 11 March 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (28)
Toward Sustainability in All‐Printed Accumulation Mode Organic Electrochemical Transistors
This study reports on the first all‐printed vertically stacked organic electrochemical transistors (OECTs) operating in accumulation mode; the devices, relying on poly([4,4′‐bis(2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)‐2,2′‐bithiophen‐5,5′‐diyl]‐alt‐[thieno[3,2‐b]thiophene‐2,5‐diyl]) (pgBTTT) as the active channel material, are fabricated via a combination of screen and inkjet printing technologies. The resulting OECTs (W/L ≈5) demonstrate good switching performance; gm, norm ≈13 mS cm−1, µC* ≈21 F cm−1 V−1 s−1, ON–OFF ratio > 104 and good cycling stability upon continuous operation for 2 h. The inkjet printing process of pgBTTT is established by first solubilizing the polymer in dihydrolevoglucosenone (Cyrene), a non‐toxic, cellulose‐derived, and biodegradable solvent. The resulting ink formulations exhibit good jettability, thereby providing reproducible and stable p‐type accumulation mode all‐printed OECTs with high performance. Besides the environmental and safety benefits of this solvent, this study also demonstrates the assessment of how the solvent affects the performance of spin‐coated OECTs, which justifies the choice of Cyrene as an alternative to commonly used harmful solvents such as chloroform, also from a device perspective. Hence, this approach shows a new possibility of obtaining more sustainable printed electronic devices, which will eventually result in all‐printed OECT‐based logic circuits operating in complementary mode.
- 11 March 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (28)
Open AccessToward Sustainability in All‐Printed Accumulation Mode Organic Electrochemical Transistors
This study reports on the first all‐printed vertically stacked organic electrochemical transistors (OECTs) operating in accumulation mode; the devices, relying on poly([4,4′‐bis(2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)‐2,2′‐bithiophen‐5,5′‐diyl]‐alt‐[thieno[3,2‐b]thiophene‐2,5‐diyl]) (pgBTTT) as the active channel material, are fabricated via a combination of screen and inkjet printing technologies. The resulting OECTs (W/L ≈5) demonstrate good switching performance; gm, norm ≈13 mS cm−1, µC* ≈21 F cm−1 V−1 s−1, ON–OFF ratio > 104 and good cycling stability upon continuous operation for 2 h. The inkjet printing process of pgBTTT is established by first solubilizing the polymer in dihydrolevoglucosenone (Cyrene), a non‐toxic, cellulose‐derived, and biodegradable solvent. The resulting ink formulations exhibit good jettability, thereby providing reproducible and stable p‐type accumulation mode all‐printed OECTs with high performance. Besides the environmental and safety benefits of this solvent, this study also demonstrates the assessment of how the solvent affects the performance of spin‐coated OECTs, which justifies the choice of Cyrene as an alternative to commonly used harmful solvents such as chloroform, also from a device perspective. Hence, this approach shows a new possibility of obtaining more sustainable printed electronic devices, which will eventually result in all‐printed OECT‐based logic circuits operating in complementary mode.
- Open Access
- 18 October 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (43) , 29842-29849
Intramolecular locking and coumarin insertion: a stepwise approach for TADF design
Starting from the known emitter Qx-Ph-DMAC, stepwise modification by coumarin integration and locking of the acceptor affords closer alignment of excited states, leading to improvements in TADF performance and emission efficiency in DBChromQx-DMAC.
- 18 October 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (43) , 29842-29849
Open AccessIntramolecular locking and coumarin insertion: a stepwise approach for TADF design
Starting from the known emitter Qx-Ph-DMAC, stepwise modification by coumarin integration and locking of the acceptor affords closer alignment of excited states, leading to improvements in TADF performance and emission efficiency in DBChromQx-DMAC.
- 3 October 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. PC12211, PC122110B
Next-generation polymeric semiconductors for organic electrochemical transistors (Conference Presentation)
At this moment, we are still far away from understanding many neurologic diseases. However, the emergence of different bioelectronic technologies opens the pathway to fathom them once and for all. Organic electrochemical transistors (OECTs) can assist here, thanks to their superior recording of neurological signals. Moreover, their flexible nature allows application in non-invasive scalp electrode devices. Nevertheless, the field of OECTs is still in its infancy, and clear, rational design criteria are lacking. Hence, dedicated backbone and side-chain engineering could enlighten the structure-performance relationships for next-generation conjugated polymers that are able to transport both ions and electrons in future OECTs.
- 3 October 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. PC12211, PC122110B
Next-generation polymeric semiconductors for organic electrochemical transistors (Conference Presentation)
At this moment, we are still far away from understanding many neurologic diseases. However, the emergence of different bioelectronic technologies opens the pathway to fathom them once and for all. Organic electrochemical transistors (OECTs) can assist here, thanks to their superior recording of neurological signals. Moreover, their flexible nature allows application in non-invasive scalp electrode devices. Nevertheless, the field of OECTs is still in its infancy, and clear, rational design criteria are lacking. Hence, dedicated backbone and side-chain engineering could enlighten the structure-performance relationships for next-generation conjugated polymers that are able to transport both ions and electrons in future OECTs.
- 6 June 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (24) , 9344-9355
Balancing fluorescence and singlet oxygen formation in push–pull type near-infrared BODIPY photosensitizers
Rational, computationally guided, molecular design affords push–pull BODIPY photosensitizers with balanced brightness and phototoxicity for image-guided photodynamic therapy.
- 6 June 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (24) , 9344-9355
Balancing fluorescence and singlet oxygen formation in push–pull type near-infrared BODIPY photosensitizers
Rational, computationally guided, molecular design affords push–pull BODIPY photosensitizers with balanced brightness and phototoxicity for image-guided photodynamic therapy.
- Open Access
- 25 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (15) , 5840-5848
Dominant dimer emission provides colour stability for red thermally activated delayed fluorescence emitter
Colour purity and stability in multi-donor thermally activated delayed fluorescence (TADF) emitters has significant implications for commercial organic light-emitting diode (OLED) design. The formation of emissive dimer states in the well-known 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) chromophore at elevated dopant concentrations has recently been confirmed both experimentally and via theoretical calculations, indicating that multi-donor emitters such as 4CzIPN might suffer from a lack of colour stability due to the presence of multiple emissive states. This poses a serious issue for OLED manufacturers. In this work, dithieno[3,2-b:2′,3′-d]pyrrole (DTP) is applied as an alternative donor unit in a TADF emitter for the first time. In combination with isophthalonitrile (IPN), the 4CzIPN analogue termed 4DTPIPN is obtained. The strong electron donating nature of the DTP moiety gives rise to a red shift of the emission with respect to that of 4CzIPN. We identify that 4DTPIPN has a very stable emission spectrum throughout all solid-state thin film concentrations and host materials. Rather interestingly, this colour stability is obtained via the formation of dimer/aggregate species that are present even at 0.01 wt% concentration. Unfortunately, the higher colour stability is paired with a low photoluminescence quantum yield, making 4DTPIPN unviable for device applications. Nonetheless, this work shows the importance of dimer contributions, even at dilute doping concentrations. This molecule and study provide important understanding of the aggregation behaviour of small-molecule emitters necessary for the successful application of doped and, especially, non-doped OLED architectures.
- 25 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (15) , 5840-5848
Open AccessDominant dimer emission provides colour stability for red thermally activated delayed fluorescence emitter
Colour purity and stability in multi-donor thermally activated delayed fluorescence (TADF) emitters has significant implications for commercial organic light-emitting diode (OLED) design. The formation of emissive dimer states in the well-known 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) chromophore at elevated dopant concentrations has recently been confirmed both experimentally and via theoretical calculations, indicating that multi-donor emitters such as 4CzIPN might suffer from a lack of colour stability due to the presence of multiple emissive states. This poses a serious issue for OLED manufacturers. In this work, dithieno[3,2-b:2′,3′-d]pyrrole (DTP) is applied as an alternative donor unit in a TADF emitter for the first time. In combination with isophthalonitrile (IPN), the 4CzIPN analogue termed 4DTPIPN is obtained. The strong electron donating nature of the DTP moiety gives rise to a red shift of the emission with respect to that of 4CzIPN. We identify that 4DTPIPN has a very stable emission spectrum throughout all solid-state thin film concentrations and host materials. Rather interestingly, this colour stability is obtained via the formation of dimer/aggregate species that are present even at 0.01 wt% concentration. Unfortunately, the higher colour stability is paired with a low photoluminescence quantum yield, making 4DTPIPN unviable for device applications. Nonetheless, this work shows the importance of dimer contributions, even at dilute doping concentrations. This molecule and study provide important understanding of the aggregation behaviour of small-molecule emitters necessary for the successful application of doped and, especially, non-doped OLED architectures.
- 5 January 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (12) , 4775-4784
Bridge control of photophysical properties in benzothiazole-phenoxazine emitters – from thermally activated delayed fluorescence to room temperature phosphorescence
Three phenoxazine-π-bridge-benzothiazole dyes are investigated by a joint experimental-computational approach. Depending on the linker, TADF or RTP (also in solution) is observed.
- 5 January 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (12) , 4775-4784
Bridge control of photophysical properties in benzothiazole-phenoxazine emitters – from thermally activated delayed fluorescence to room temperature phosphorescence
Three phenoxazine-π-bridge-benzothiazole dyes are investigated by a joint experimental-computational approach. Depending on the linker, TADF or RTP (also in solution) is observed.
- 25 May 2021
- Published by Wiley in Chemphyschem
- Vol. 22 (14) , 1488-1496
Heavy‐Atom‐Free Bay‐Substituted Perylene Diimide Donor‐Acceptor Photosensitizers
Perylene diimide (PDI) dyes are extensively investigated because of their favorable photophysical characteristics for a wide range of organic material applications. Fine‐tuning of the optoelectronic properties is readily achieved by functionalization of the electron‐deficient PDI scaffold. Here, we present four new donor‐acceptor type dyads, wherein the electron donor units – benzo[1,2‐b : 4,5‐b’]dithiophene, 9,9‐dimethyl‐9,10‐dihydroacridine, dithieno[3,2‐b : 2’,3’‐d]pyrrole, and triphenylamine‐are attached to the bay‐positions of the PDI acceptor. Intersystem crossing occurs for these systems upon photoexcitation, without the aid of heavy atoms, resulting in singlet oxygen quantum yields up to 80 % in toluene solution. Furthermore, this feature is retained when the system is directly irradiated with energy corresponding to the intramolecular charge‐transfer absorption band (at 639 nm). Geometrical optimization and (time‐dependent) density functional theory calculations afford more insights into the requirements for intersystem crossing such as spin‐orbit coupling, dihedral angles, the involvement of charge‐transfer states, and energy level alignment.
- 25 May 2021
- Published by Wiley in Chemphyschem
- Vol. 22 (14) , 1488-1496
Heavy‐Atom‐Free Bay‐Substituted Perylene Diimide Donor‐Acceptor Photosensitizers
Perylene diimide (PDI) dyes are extensively investigated because of their favorable photophysical characteristics for a wide range of organic material applications. Fine‐tuning of the optoelectronic properties is readily achieved by functionalization of the electron‐deficient PDI scaffold. Here, we present four new donor‐acceptor type dyads, wherein the electron donor units – benzo[1,2‐b : 4,5‐b’]dithiophene, 9,9‐dimethyl‐9,10‐dihydroacridine, dithieno[3,2‐b : 2’,3’‐d]pyrrole, and triphenylamine‐are attached to the bay‐positions of the PDI acceptor. Intersystem crossing occurs for these systems upon photoexcitation, without the aid of heavy atoms, resulting in singlet oxygen quantum yields up to 80 % in toluene solution. Furthermore, this feature is retained when the system is directly irradiated with energy corresponding to the intramolecular charge‐transfer absorption band (at 639 nm). Geometrical optimization and (time‐dependent) density functional theory calculations afford more insights into the requirements for intersystem crossing such as spin‐orbit coupling, dihedral angles, the involvement of charge‐transfer states, and energy level alignment.
- 6 July 2020
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 22 (28) , 16387-16399
Finding the optimal exchange–correlation functional to describe the excited state properties of push–pull organic dyes designed for thermally activated delayed fluorescence
To gauge the suitability of an organic dye for thermally activated delayed fluorescence (TADF), its excited state properties are often calculated using density functional theory. For this purpose, the choice of the exchange–correlation (XC) functional is crucial as it heavily influences the quality of the obtained results. In this work, 19 different XC functionals with various amounts of Hartree–Fock (HF) exchange and/or long-range correction parameters are benchmarked versus resolution-of-the-identity second-order coupled cluster (riCC2) calculations for a set of 10 prototype intramolecular donor–acceptor compounds. For the time-dependent density functional theory (TD-DFT) calculations, LC-BLYP(ω = 0.20) and M06-2X are the better performing XC functionals when looking at singlet and triplet excitation energies, respectively. For the singlet–triplet energy gap, LC-BLYP(ω = 0.17), LC-ωPBE(ω = 0.17) and a hybrid LC-BLYP(ω = 0.20)/M06-2X method give the smallest mean average errors (MAEs). Using the Tamm–Dancoff approximation (TD-DFT/TDA), the MAEs are further reduced for the triplet vertical excitation energies and the singlet–triplet energy gaps.
- 6 July 2020
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 22 (28) , 16387-16399
Finding the optimal exchange–correlation functional to describe the excited state properties of push–pull organic dyes designed for thermally activated delayed fluorescence
To gauge the suitability of an organic dye for thermally activated delayed fluorescence (TADF), its excited state properties are often calculated using density functional theory. For this purpose, the choice of the exchange–correlation (XC) functional is crucial as it heavily influences the quality of the obtained results. In this work, 19 different XC functionals with various amounts of Hartree–Fock (HF) exchange and/or long-range correction parameters are benchmarked versus resolution-of-the-identity second-order coupled cluster (riCC2) calculations for a set of 10 prototype intramolecular donor–acceptor compounds. For the time-dependent density functional theory (TD-DFT) calculations, LC-BLYP(ω = 0.20) and M06-2X are the better performing XC functionals when looking at singlet and triplet excitation energies, respectively. For the singlet–triplet energy gap, LC-BLYP(ω = 0.17), LC-ωPBE(ω = 0.17) and a hybrid LC-BLYP(ω = 0.20)/M06-2X method give the smallest mean average errors (MAEs). Using the Tamm–Dancoff approximation (TD-DFT/TDA), the MAEs are further reduced for the triplet vertical excitation energies and the singlet–triplet energy gaps.
- 25 June 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (66) , 15212-15225
Near‐Infrared BODIPY‐Acridine Dyads Acting as Heavy‐Atom‐Free Dual‐Functioning Photosensitizers
Boron dipyrromethene (BODIPY) dyes represent a particular class within the broad array of potential photosensitizers. Their highly fluorescent nature opens the door for theragnostic applications, combining imaging and therapy using a single, easily synthesized chromophore. However, near‐infrared absorption is strongly desired for photodynamic therapy to enhance tissue penetration. Furthermore, singlet oxygen should preferentially be generated without the incorporation of heavy atoms, as these often require additional synthetic efforts and/or afford dark cytotoxicity. Solutions for both problems are known, but have never been successfully combined in one simple BODIPY material. Here, we present a series of compact BODIPY‐acridine dyads, active in the phototherapeutic window and showing balanced brightness and phototoxic power. Although the donor–acceptor design was envisioned to introduce a charge transfer state to assist in intersystem crossing, quantum‐chemical calculations refute this. Further photophysical investigations suggest the presence of exciplex states and their involvement in singlet oxygen formation.
- 25 June 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 26 (66) , 15212-15225
Near‐Infrared BODIPY‐Acridine Dyads Acting as Heavy‐Atom‐Free Dual‐Functioning Photosensitizers
Boron dipyrromethene (BODIPY) dyes represent a particular class within the broad array of potential photosensitizers. Their highly fluorescent nature opens the door for theragnostic applications, combining imaging and therapy using a single, easily synthesized chromophore. However, near‐infrared absorption is strongly desired for photodynamic therapy to enhance tissue penetration. Furthermore, singlet oxygen should preferentially be generated without the incorporation of heavy atoms, as these often require additional synthetic efforts and/or afford dark cytotoxicity. Solutions for both problems are known, but have never been successfully combined in one simple BODIPY material. Here, we present a series of compact BODIPY‐acridine dyads, active in the phototherapeutic window and showing balanced brightness and phototoxic power. Although the donor–acceptor design was envisioned to introduce a charge transfer state to assist in intersystem crossing, quantum‐chemical calculations refute this. Further photophysical investigations suggest the presence of exciplex states and their involvement in singlet oxygen formation.