Xiaochuan Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Xiaochuan Huang has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
- Qilin Li
Department of Civil and Environmental Engineering, Rice University, Houston, USA
7 shared publications - Kuichang Zuo
Peking University
5 shared publications - Pedro J. J. Alvarez
Rice University
3 shared publications Ze He
3 shared publications- Jun Lou
Department of Materials Science and Nanoengineering Rice University Houston Texas USA
2 shared publications - Menachem Elimelech
Department of Civil and Environmental Engineering, Rice University, Houston, TX 77005, USA
2 shared publications
Latest Publications
- Open Access
- 29 September 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
A rationally designed scalable thin film nanocomposite cation exchange membrane for precise lithium extraction
Precise separation of ions of the same polarity and similar valence and size remains a critical need in resource recovery from waste streams. Here, we report the rational design and scalable fabrication of a thin film nanocomposite (TFN) cation exchange membrane to achieve precise selectivity for lithium over competing cations. The precise selectivity is realized by an ultrathin polyamide (PA) layer incorporated with amine functionalized β-monoclinic lithium titanium oxide (N-LTO) nanoparticles using a scalable interfacial polymerization process that allows high N-LTO loading while minimizing interfacial defects. The TFN membrane demonstrates superior Li+ permeability, with Li+/Ca2+ and Li+/Na+ selectivity reaching 173.90 and 13.58, respectively. The Li+/Na+ selectivity is attributed to the Li+-exclusive transport pathway in the layered structure of the N-LTO, while size exclusion by the highly cross-linked N-LTO-PA also contrubutes to the Li+/Ca2+ selectivity. Molecular dynamics simulation shows that the electrical field drives Li+ dehydration and accelerates the migration of the dehydrated Li+ while Na+ is blocked due to its larger size than the Li+ cavity. The high Li+ selectivity and permeability enable energy-efficient, precise, and chemical-free lithium extraction using the electrodialysis process. The TFN membrane architecture also allows simple and scalable fabrication of a multi-functional polymer-inorganic nanocomposite membrane.
- 29 September 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Open AccessA rationally designed scalable thin film nanocomposite cation exchange membrane for precise lithium extraction
Precise separation of ions of the same polarity and similar valence and size remains a critical need in resource recovery from waste streams. Here, we report the rational design and scalable fabrication of a thin film nanocomposite (TFN) cation exchange membrane to achieve precise selectivity for lithium over competing cations. The precise selectivity is realized by an ultrathin polyamide (PA) layer incorporated with amine functionalized β-monoclinic lithium titanium oxide (N-LTO) nanoparticles using a scalable interfacial polymerization process that allows high N-LTO loading while minimizing interfacial defects. The TFN membrane demonstrates superior Li+ permeability, with Li+/Ca2+ and Li+/Na+ selectivity reaching 173.90 and 13.58, respectively. The Li+/Na+ selectivity is attributed to the Li+-exclusive transport pathway in the layered structure of the N-LTO, while size exclusion by the highly cross-linked N-LTO-PA also contrubutes to the Li+/Ca2+ selectivity. Molecular dynamics simulation shows that the electrical field drives Li+ dehydration and accelerates the migration of the dehydrated Li+ while Na+ is blocked due to its larger size than the Li+ cavity. The high Li+ selectivity and permeability enable energy-efficient, precise, and chemical-free lithium extraction using the electrodialysis process. The TFN membrane architecture also allows simple and scalable fabrication of a multi-functional polymer-inorganic nanocomposite membrane.
- Top Cited Papers
- 23 July 2024
- Published by Springer Nature in Nature Reviews Earth & Environment
- Vol. 5 (8) , 572-587
Trends, risks and opportunities in environmental nanotechnology
- 23 July 2024
- Published by Springer Nature in Nature Reviews Earth & Environment
- Vol. 5 (8) , 572-587
Top Cited PapersTrends, risks and opportunities in environmental nanotechnology
- 1 February 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 483
Surface hydrophobicity of boron nitride promotes PFOA photocatalytic degradation
- 1 February 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 483
Surface hydrophobicity of boron nitride promotes PFOA photocatalytic degradation
- Open Access
- 4 August 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-10
Ultrahigh resistance of hexagonal boron nitride to mineral scale formation
Formation of mineral scale on a material surface has profound impact on a wide range of natural processes as well as industrial applications. However, how specific material surface characteristics affect the mineral-surface interactions and subsequent mineral scale formation is not well understood. Here we report the superior resistance of hexagonal boron nitride (hBN) to mineral scale formation compared to not only common metal and polymer surfaces but also the highly scaling-resistant graphene, making hBN possibly the most scaling resistant material reported to date. Experimental and simulation results reveal that this ultrahigh scaling-resistance is attributed to the combination of hBN’s atomically-smooth surface, in-plane atomic energy corrugation due to the polar boron-nitrogen bond, and the close match between its interatomic spacing and the size of water molecules. The latter two properties lead to strong polar interactions with water and hence the formation of a dense hydration layer, which strongly hinders the approach of mineral ions and crystals, decreasing both surface heterogeneous nucleation and crystal attachment.
- 4 August 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-10
Open AccessUltrahigh resistance of hexagonal boron nitride to mineral scale formation
Formation of mineral scale on a material surface has profound impact on a wide range of natural processes as well as industrial applications. However, how specific material surface characteristics affect the mineral-surface interactions and subsequent mineral scale formation is not well understood. Here we report the superior resistance of hexagonal boron nitride (hBN) to mineral scale formation compared to not only common metal and polymer surfaces but also the highly scaling-resistant graphene, making hBN possibly the most scaling resistant material reported to date. Experimental and simulation results reveal that this ultrahigh scaling-resistance is attributed to the combination of hBN’s atomically-smooth surface, in-plane atomic energy corrugation due to the polar boron-nitrogen bond, and the close match between its interatomic spacing and the size of water molecules. The latter two properties lead to strong polar interactions with water and hence the formation of a dense hydration layer, which strongly hinders the approach of mineral ions and crystals, decreasing both surface heterogeneous nucleation and crystal attachment.
- 1 February 2021
- Published by Elsevier in Journal of Membrane Science
- Vol. 620
Wetting-resistant photothermal nanocomposite membranes for direct solar membrane distillation
- 1 February 2021
- Published by Elsevier in Journal of Membrane Science
- Vol. 620
Wetting-resistant photothermal nanocomposite membranes for direct solar membrane distillation
- Open Access
Bi-Polymer Electrospun Nanofibers Embedding Ag3PO4/P25 Composite for Efficient Photocatalytic Degradation and Anti-Microbial Activity
Using a bi-polymer system comprising of transparent poly(methyl methacrylate) (PMMA) and poly(vinyl pyrrolidone) (PVP), a visible light active Ag3PO4/P25 composite was immobilized into the mats of polymeric electrospun nanofibers. After nanofibers synthesis, sacrificial PVP was removed, leaving behind rough surface nanofibers with easy access to Ag3PO4/P25 composite. The remarkable photocatalytic efficiency was attained using a PMMA and Ag3PO4/P25 weight ratio of 1:0.6. Methyl orange (MO) was used to visualize pollutant removal and exhibited stable removal kinetics up to five consecutive cycles under simulated daylight. Also, these polymeric nanofibers (NFs) revealed an important role in the destruction of microorganisms (E. coli), signifying their potential in water purification. A thin film fibrous mat was also used in a small bench scale plug flow reactor (PFR) for polishing of synthetic secondary effluent and the effects of inorganic salts were studied upon photocatalytic degradation in terms of total organic carbon (TOC) and turbidity removal. Lower flow rate (5 mL/h) resulted in maximum TOC and turbidity removal rates of 86% and 50%, respectively. Accordingly, effective Ag3PO4/P25 immobilization into an ideal support material and selectivity towards target pollutants could both enhance the efficiency of photocatalytic process under solar radiations without massive energy input.
Open AccessBi-Polymer Electrospun Nanofibers Embedding Ag3PO4/P25 Composite for Efficient Photocatalytic Degradation and Anti-Microbial Activity
Using a bi-polymer system comprising of transparent poly(methyl methacrylate) (PMMA) and poly(vinyl pyrrolidone) (PVP), a visible light active Ag3PO4/P25 composite was immobilized into the mats of polymeric electrospun nanofibers. After nanofibers synthesis, sacrificial PVP was removed, leaving behind rough surface nanofibers with easy access to Ag3PO4/P25 composite. The remarkable photocatalytic efficiency was attained using a PMMA and Ag3PO4/P25 weight ratio of 1:0.6. Methyl orange (MO) was used to visualize pollutant removal and exhibited stable removal kinetics up to five consecutive cycles under simulated daylight. Also, these polymeric nanofibers (NFs) revealed an important role in the destruction of microorganisms (E. coli), signifying their potential in water purification. A thin film fibrous mat was also used in a small bench scale plug flow reactor (PFR) for polishing of synthetic secondary effluent and the effects of inorganic salts were studied upon photocatalytic degradation in terms of total organic carbon (TOC) and turbidity removal. Lower flow rate (5 mL/h) resulted in maximum TOC and turbidity removal rates of 86% and 50%, respectively. Accordingly, effective Ag3PO4/P25 immobilization into an ideal support material and selectivity towards target pollutants could both enhance the efficiency of photocatalytic process under solar radiations without massive energy input.
- Open Access
- 18 August 2017
- Published by MDPI AG in Applied Sciences
- Vol. 7 (8) , 852
Silver Nanoparticles-Loaded Exfoliated Graphite and Its Anti-Bacterial Performance
One antibacterial material was prepared from exfoliated graphite (EG) decorated with silver nanoparticles (AgNPs). The EG was prepared by the graphite intercalated compound process, AgNPs were prepared by chemical reduction of AgNO3 in the presence of NaBH4. The AgNPs-loaded EG (Ag-EG) composite was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), nitrogen adsorption, mercury intrusion porosimetry, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The antibacterial effect of the Ag-EG was evaluated by using the zone of inhibition method. The loaded AgNPs were highly dispersed on EG sheets and most of them have a size less than 10 nm. The Ag loading slightly increased the surface area of EG. It is shown that the Ag-EG had antibacterial activity and anti-adhesion properties against Pseudomonas aeruginosa and Staphylococcus aureus. It suggests that Ag-EG composites could be used in a variety of industrial applications that require an antibacterial effect.
- 18 August 2017
- Published by MDPI AG in Applied Sciences
- Vol. 7 (8) , 852
Open AccessSilver Nanoparticles-Loaded Exfoliated Graphite and Its Anti-Bacterial Performance
One antibacterial material was prepared from exfoliated graphite (EG) decorated with silver nanoparticles (AgNPs). The EG was prepared by the graphite intercalated compound process, AgNPs were prepared by chemical reduction of AgNO3 in the presence of NaBH4. The AgNPs-loaded EG (Ag-EG) composite was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), nitrogen adsorption, mercury intrusion porosimetry, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The antibacterial effect of the Ag-EG was evaluated by using the zone of inhibition method. The loaded AgNPs were highly dispersed on EG sheets and most of them have a size less than 10 nm. The Ag loading slightly increased the surface area of EG. It is shown that the Ag-EG had antibacterial activity and anti-adhesion properties against Pseudomonas aeruginosa and Staphylococcus aureus. It suggests that Ag-EG composites could be used in a variety of industrial applications that require an antibacterial effect.
- 1 June 2016
- Published by Elsevier in Separation and Purification Technology
- Vol. 166, 230-239
A thin-film nanocomposite nanofiltration membrane prepared on a support with in situ embedded zeolite nanoparticles
- 1 June 2016
- Published by Elsevier in Separation and Purification Technology
- Vol. 166, 230-239
A thin-film nanocomposite nanofiltration membrane prepared on a support with in situ embedded zeolite nanoparticles