Khalil Hachicha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Khalil Hachicha has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Olivier Romain
ETIS Lab, CY CERGY PARIS UNIVERSITY, CERGY PONTOISE, France
3 shared publications - Abdelaziz Benallegue
Laboratoire d'Ingénierie des Systémes de Versailles, 10-12, avenue de l'Europe, 78140 Vélizy - FRANCE
1 shared publication - Abdelhafid El Hadri
Universit Paris-Saclay, UVSQ, LISV, Vlizy-Villacoublay, France
1 shared publication - Andrea Pinna
CNRS, LIP6, Sorbonne Université, Paris, France
1 shared publication - Ayoub Mamri
Universit Paris-Saclay, UVSQ, LISV, Vlizy-Villacoublay, France
1 shared publication - Bertrand Granado
Université Pierre et Marie Curie
1 shared publication
Latest Publications
- Open Access
Feature-PLPD-Aided Visual–Inertial Odometry for Low-Cost Embedded Systems
Visual–Inertial Odometry (VIO) has become a key technology for motion estimation in robotics and autonomous systems. However, deploying accurate VIO pipelines on embedded platforms remains challenging due to the trade-off between estimation accuracy, real-time performance, and energy consumption. This paper presents a hardware-aware Feature-PLPD VIO framework that integrates a point-and-line visual front-end with a loosely coupled Error-State Extended Kalman Filter (ESEKF) back-end. The proposed approach follows Algorithm Architecture Adequacy (A3) principles to preserve estimation robustness while limiting computational and memory requirements. To investigate its scalability across the considered resource constraints, two end-to-end embedded implementations are developed: a performance-oriented stereo VIO system on a GPU-based platform using GPU-aware software design, and a frugality-oriented low-cost RGB-D-assisted monocular VIO system on an FPGA-based architecture using hardware–software co-design with depth scale correction. The stereo GPU-based implementation is evaluated offline in both outdoor and indoor environments and is additionally validated through real-time on-the-fly deployment on a Scout Mini robot, whereas the FPGA-based implementation is evaluated offline using the indoor VICON dataset. Experimental results demonstrate meter-level trajectory accuracy and real-time performance under strict resource constraints. Averaged over four KITTI sequences, the proposed ESEKF-based fusion reduces the translation and rotation ATE by approximately 25% and 18%, respectively, compared with the corresponding VO-only configuration, while a 10% reduction in translation ATE is achieved in the indoor VICON environment, resulting in a normalized ATE of over the m trajectory. Both embedded implementations sustain around 20 fps, and the architectural evaluation highlights complementary accuracy–runtime–energy trade-offs between the GPU- and FPGA-based solutions. These results demonstrate the feasibility of scaling the proposed embedded VIO framework toward resource- and energy-constrained robotic applications under the investigated experimental and hardware configurations.Open AccessFeature-PLPD-Aided Visual–Inertial Odometry for Low-Cost Embedded Systems
Visual–Inertial Odometry (VIO) has become a key technology for motion estimation in robotics and autonomous systems. However, deploying accurate VIO pipelines on embedded platforms remains challenging due to the trade-off between estimation accuracy, real-time performance, and energy consumption. This paper presents a hardware-aware Feature-PLPD VIO framework that integrates a point-and-line visual front-end with a loosely coupled Error-State Extended Kalman Filter (ESEKF) back-end. The proposed approach follows Algorithm Architecture Adequacy (A3) principles to preserve estimation robustness while limiting computational and memory requirements. To investigate its scalability across the considered resource constraints, two end-to-end embedded implementations are developed: a performance-oriented stereo VIO system on a GPU-based platform using GPU-aware software design, and a frugality-oriented low-cost RGB-D-assisted monocular VIO system on an FPGA-based architecture using hardware–software co-design with depth scale correction. The stereo GPU-based implementation is evaluated offline in both outdoor and indoor environments and is additionally validated through real-time on-the-fly deployment on a Scout Mini robot, whereas the FPGA-based implementation is evaluated offline using the indoor VICON dataset. Experimental results demonstrate meter-level trajectory accuracy and real-time performance under strict resource constraints. Averaged over four KITTI sequences, the proposed ESEKF-based fusion reduces the translation and rotation ATE by approximately 25% and 18%, respectively, compared with the corresponding VO-only configuration, while a 10% reduction in translation ATE is achieved in the indoor VICON environment, resulting in a normalized ATE of over the m trajectory. Both embedded implementations sustain around 20 fps, and the architectural evaluation highlights complementary accuracy–runtime–energy trade-offs between the GPU- and FPGA-based solutions. These results demonstrate the feasibility of scaling the proposed embedded VIO framework toward resource- and energy-constrained robotic applications under the investigated experimental and hardware configurations. - Open Access
- 26 September 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Embedded Computing Systems
- Vol. 24 (1) , 1-26
ZIP-CNN: Design Space Exploration for CNN Implementation within a MCU
Embedded systems based on Microcontroller Units (MCUs) often gather significant quantities of data and solve various issues. Convolutional Neural Networks (CNNs) have proven their effectiveness in solving computer vision and natural language processing tasks. However, implementing CNNs within MCUs is challenging due to their high inference costs, which varies widely depending on hardware targets and CNN topologies. Despite state-of-the-art advancements, no efficient design space exploration solutions handle the wide variety of implementation solutions. In this article, we introduce the ZIP-CNN design space exploration methodology, which facilitates CNN implementation within MCUs. We developed a model that quantitatively estimates the latency, energy consumption, and memory space required to run a CNN within an MCU. This model accounts for algorithmic reductions such as knowledge distillation, pruning, or quantization and applies to any CNN topology. To demonstrate the efficiency of our methodology, we investigated LeNet5, ResNet8, and ResNet26 within three different MCUs. We made materials and supplementary results available in a GitHub repository: https://github.com/ThGbay/ZIP-CNN . The proposed method was empirically verified on three hardware targets running at 14 different operating frequencies. The three CNN topologies investigated were implemented in their default configuration in FP32, and also reduced with INT8 quantization, pruning at five different rates and with knowledge distillation. The estimates of our model are very reliable with an error of 3.29% to 15.23% for latency, 3.12% to 10.34% for energy consumption, and 1.95% to 6.31% for memory space. These results are based on on-device measurements.
- 26 September 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Embedded Computing Systems
- Vol. 24 (1) , 1-26
Open AccessZIP-CNN: Design Space Exploration for CNN Implementation within a MCU
Embedded systems based on Microcontroller Units (MCUs) often gather significant quantities of data and solve various issues. Convolutional Neural Networks (CNNs) have proven their effectiveness in solving computer vision and natural language processing tasks. However, implementing CNNs within MCUs is challenging due to their high inference costs, which varies widely depending on hardware targets and CNN topologies. Despite state-of-the-art advancements, no efficient design space exploration solutions handle the wide variety of implementation solutions. In this article, we introduce the ZIP-CNN design space exploration methodology, which facilitates CNN implementation within MCUs. We developed a model that quantitatively estimates the latency, energy consumption, and memory space required to run a CNN within an MCU. This model accounts for algorithmic reductions such as knowledge distillation, pruning, or quantization and applies to any CNN topology. To demonstrate the efficiency of our methodology, we investigated LeNet5, ResNet8, and ResNet26 within three different MCUs. We made materials and supplementary results available in a GitHub repository: https://github.com/ThGbay/ZIP-CNN . The proposed method was empirically verified on three hardware targets running at 14 different operating frequencies. The three CNN topologies investigated were implemented in their default configuration in FP32, and also reduced with INT8 quantization, pruning at five different rates and with knowledge distillation. The estimates of our model are very reliable with an error of 3.29% to 15.23% for latency, 3.12% to 10.34% for energy consumption, and 1.95% to 6.31% for memory space. These results are based on on-device measurements.
- Open Access
- 25 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 5, 14638-14646
Fast and Parallel AAC Decoder Architecture for a Digital Radio Mondiale 30 Receiver
An embedded real-time indexing engine for live radio stations requires a high-speed parallel advanced audio coding (AAC) decoder architecture to decode hundreds of compressed audio streams broadcast in the digital radio mondiale band. Several AAC hardware core units must be integrated into a single chip and synchronized with a global controller to achieve such high performance. This paper proposes a new parallel AAC decoder architecture to address this challenge. The proposed architecture includes multiple AAC decoder core units, each of which achieves a speed-up by a factor of 2 compared with the existing AAC decoder core units while using optimal logic resources. The proposed architecture overcomes several challenges faced by existing architectures. The Huffman decoder module decodes one word per clock cycle regardless of word length, and a smaller lookup table size is achieved for the inverse quantization module. The inverse modified discrete cosine transform architecture is fully pipelined, and the resource sharing technique is used to reduce the logic area. An initial prototype is implemented on an FPGA platform.
- 25 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 5, 14638-14646
Open AccessFast and Parallel AAC Decoder Architecture for a Digital Radio Mondiale 30 Receiver
An embedded real-time indexing engine for live radio stations requires a high-speed parallel advanced audio coding (AAC) decoder architecture to decode hundreds of compressed audio streams broadcast in the digital radio mondiale band. Several AAC hardware core units must be integrated into a single chip and synchronized with a global controller to achieve such high performance. This paper proposes a new parallel AAC decoder architecture to address this challenge. The proposed architecture includes multiple AAC decoder core units, each of which achieves a speed-up by a factor of 2 compared with the existing AAC decoder core units while using optimal logic resources. The proposed architecture overcomes several challenges faced by existing architectures. The Huffman decoder module decodes one word per clock cycle regardless of word length, and a smaller lookup table size is achieved for the inverse quantization module. The inverse modified discrete cosine transform architecture is fully pipelined, and the resource sharing technique is used to reduce the logic area. An initial prototype is implemented on an FPGA platform.
- 21 October 2008
- Published by Springer Nature in Journal of Real-Time Image Processing
- Vol. 4 (1) , 55-65
Accelerating the multiple reference frames compensation in the H.264 video coder
- 21 October 2008
- Published by Springer Nature in Journal of Real-Time Image Processing
- Vol. 4 (1) , 55-65
Accelerating the multiple reference frames compensation in the H.264 video coder
- 1 July 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 4 (21635137) , 2792-2797
Implementation of MPEG4/Markov Video Coder on M.E.R.I.T.E Platform
This paper describes the development and the implementation of an MPEG4/Markov encoder on embedded ALTERA RISC processor Nios 32. The MPEG4/Markov is an original encoder developed in our laboratory allowing to reach better performances than those realized with a classical MPEG4 video encoder. The purpose of this implementation is to validate the platform MERITE. It is architecture of a versatile platform for wireless sensor networks. This platform acquires environmental data and detects important variations in order to trigger some alarm. When some alarm is triggered on, data of the environment are compressed and sent on a wireless network
- 1 July 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 4 (21635137) , 2792-2797
Implementation of MPEG4/Markov Video Coder on M.E.R.I.T.E Platform
This paper describes the development and the implementation of an MPEG4/Markov encoder on embedded ALTERA RISC processor Nios 32. The MPEG4/Markov is an original encoder developed in our laboratory allowing to reach better performances than those realized with a classical MPEG4 video encoder. The purpose of this implementation is to validate the platform MERITE. It is architecture of a versatile platform for wireless sensor networks. This platform acquires environmental data and detects important variations in order to trigger some alarm. When some alarm is triggered on, data of the environment are compressed and sent on a wireless network