ZZZiyue Zhao

Ziyue Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ziyue Zhao has a total of 79 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A High-Accuracy, Hybrid Scalable Model for MIM Capacitors Over Wide Temperature for MMIC Applications

    by Zeng Li, Ziyue Zhao, Wei Zhao, Yang Lu, Chupeng Yi, Xin Liu, Ting Feng, Yilin Chen, Jiejie Zhu, Xiaohua Ma

    Conventional Process Design Kits for Monolithic Microwave Integrated Circuits (MMICs) often lack capacitor models that are robust across wide temperature and frequency ranges, posing a significant challenge to the design reliability and first-pass success. To address this, a novel π-type equivalent circuit with grounding inductors is developed, yielding S-parameter fitting errors under 2% while also explaining the device’s thermal resonant drift. Building on this, a hybrid scalable model synergizing a physics-guided core with neural network compensation is proposed. This methodology demonstrates exceptional accuracy, achieving parameter-fitting R-squared values above 0.999. More importantly, the final model’s S-parameter predictions maintain an R-squared greater than 0.98 against measured data across the entire temperature and geometry space. This work provides a highly accurate, scalable MIM capacitor model essential for robust circuit design under harsh operating conditions and offers a generalizable hybrid methodology applicable to other passive components, enhancing the predictive power of modern PDKs.

  • Modulation of Carbon-Doped Buffer on the DC and Small-Signal Characteristics of AlGaN/GaN HEMTs on Si

    by Yifan Chen, Jiejie Zhu, Mengdi Li, Yichong Ding, Lingjie Qin, Wei Zhao, Yuchen Qian, Yiwei Wang, Wanshuo Liao, Ziyue Zhao, et al.

  • ANN-Assisted Compact Model of GaN HEMTs Across Wide Temperature Ranges

    by Wei Zhao, Ziyue Zhao, Ting Feng, Yang Lu, Yilin Chen, Xuan Su, Zexiang Li, Chong Wang, Chupeng Yi, Xin Liu, et al.

    A temperature-dependent compact model for gallium nitride high-electron-mobility transistors (GaN HEMTs) based on artificial neural networks (ANNs) is presented. The model incorporates a novel analytically invertible transformation function to preprocess drain current and intrinsic capacitances, enabling accurate modeling across a wide dynamic range while maintaining a lightweight ANN architecture. Ambient temperature ( ${T}_{\text {amb}}\text {)}$ is explicitly incorporated as an input to capture the scaling of current and capacitances under different thermal conditions. The large-signal model is implemented in Verilog-A and validated using a 0.25- $\mu $ m SiC-based GaN HEMT with a $6\times 75~\mu $ m gate width. Measurements including dc-IV and small-signal S-parameter data at ${T}_{\text {amb}}$ from $25~^{\circ }$ C to $150~^{\circ }$ C are well reproduced. More importantly, large-signal load-pull experiments at 3.6 GHz confirm that the model reliably predicts output power, gain, and power-added efficiency (PAE) under different ${T}_{\text {amb}}$ conditions. These results demonstrate the effectiveness of the proposed ANN-based compact model in addressing the temperature-dependent nonlinear behavior of GaN HEMTs for circuit design applications.

  • Top Cited Papers

    High RF Performance Enhancement-Mode Thin-Barrier AlGaN/GaN HEMTs on Si Substrate for Low-Voltage Applications

    by Mengdi Li, Jiejie Zhu, Lingjie Qin, Yuxi Zhou, Bowen Zhang, Mingchen Zhang, Quanxu Su, Ziyue Zhao, Qing Zhu, Huimei Ma, et al.

    In this work, high-performance enhancement-mode (E-mode) AlGaN/GaN high electron mobility transistors (HEMTs) on Si substrate for low-voltage RF applications were demonstrated. The thin-barrier AlGaN (7 nm) and CF4-based gate recess etching were adopted to realize a positive threshold voltage of 0.13 V. Attributing to the SiN strain layer grown by low-pressure chemical vapor deposition (LPCVD), the sheet resistance of the thin-barrier AlGaN/GaN heterostructure was reduced from 410 to 280 Ω/sq. Hence, the fabricated E-mode thin-barrier AlGaN/GaN HEMTs with regrown ohmic contacts and a small source-drain distance of 850 nm exhibit a high maximum output current of ~1.4 A/mm, a low ON-resistance of 0.5 Ω⋅mm, and a low knee voltage of 1.3 V. Pulsed I–V measurement shows that a low current collapse at 20 V drain quiescent condition of 2.1% was achieved. The continuous wave power measurement of the E-mode devices at 3.6 GHz shows a very large peak power added efficiency (PAE) over 65% with drain voltage Vds from 6 to 12 V (peak PAE of 67.21% at Vds = 6 V), a high maximum output power density (3.18 W/mm at 12 V), and a linear gain (17.4 dB at 6 V and 21.09 dB at 12 V). These excellent results show that the transistor maintains a constant high PAE and linearly increased gain and output power over the drain voltage variation range, which has great potential and advantages for low-voltage applications.


  • Class-F–1 GaN Power Amplifier Integrated Active Antenna With Increased Efficiency for Wireless Power Transmission Applications

    by Wen-Liang Liu, Jing-Ya Deng, Chu-Peng Yi, Zi-Yue Zhao, Ting Feng, Xin Liu, Yang Lu, Xiao-Hua Ma, Yue Hao

    This article introduces a novel power amplifier integrated active antenna (PAIAA) with increased efficiency that integrates a Class- $F {^{-}1 }$ Gallium Nitride (GaN) power amplifier (PA) and a stub-loaded wide slot antenna (SLSA) for wireless power transmission (WPT) applications. Unlike conventional PA integrated active antennas in which antennas and PAs are separately matched to 50 ohms, the input impedance of the SLSA is meticulously engineered to match the fundamental impedance and modulate harmonic impedances of the GaN transistor by optimizing the dimensions of the SLSA's stubs. This approach eliminates the output matching network (OMN), the PA's harmonic modulation network (HMN), and the antenna's input matching network (IMN), which typically incur unavoidable insertion loss but are essential for conventional Class- $F {^{-}1 }$ PAs and antennas. Consequently, it enhances the power-added efficiency (PAE) within the 3.3–3.8-GHz range and reduces the overall size of the PA integrated active antenna. Thanks to the extended design freedom offered by SLSA, precise impedance values can be achieved across a broader frequency range, resulting in increased efficiency across a larger spectrum. In addition, an innovative insertion loss measurement method for impedance matching network with a non-50- $\Omega $ port is introduced to accurately measure the Class- $F {^{-}1 }$ PA's PAE incorporated in the proposed PAIAA. The measured PAIAA demonstrates a peak PAE of 70.1%, surpassing the performances of reported integrated active antennas. The measured effective isotropic radiated power (EIRP) of the proposed PAIAA is 44.52 dBm. A conventional PA-antenna design, where an antenna and a Class- $F {^{-}1 }$ PA are separately matched to $50~\Omega $ and simply cascaded, is also designed and measured as a contrast, whose measured peak PAE and EIRP of the conventional design are only 61.5% and 43.9 dBm, respectively. The proposed PAIAA, with its increased efficiency, can be practically utilized for WPT applications in the Internet of Things (IoT), where efficiency performance is critical.


  • Evaluation of Power and Linearity at 30 GHz in AlGaN/GaN HEMT Fabricated by Integrating Transistors With Multiple Threshold Voltages

    by Pengfei Wang, Minhan Mi, Sirui An, Xiang Du, Yuwei Zhou, Can Gong, Yilin Chen, Qing Zhu, Meng Zhang, Jiuding Zhou, et al.

    In this work, using the multiple threshold voltages (multi- $\textit{V}_{\text{Ths}}\text{)}$ coupling technology introduces an innovative approach to leverage AlGaN/GaN-based high-electron-mobility transistor (AlGaN/GaN HEMT) for high linearity millimeter-wave (mm-W) applications. As a result of optimizing the etching depth of the recessed trench ( $\textit{H}_\textit{R}$ ), the fabricated composite HEMT demonstrated a remarkably flat transconductance ( $\textit{G}_\textit{m}$ ) plateau, and well-maintained profile of small-signal characteristics as a function of gate voltage. As a consequence, at a biased drain voltage of 10 V and a frequency of 30 GHz, the composite HEMT achieved the highest ratio of output third-order intercept point (OIP3) to DC power consumption ( $\textit{P}_{\text{DC}}\text{)}$ , denoted as (OIP3/ $\textit{P}_{\text{DC}}\text{)}$ , measuring $\sim$ 9.3 dB. Simultaneously optimizing the bias conditions, the devices showcased a remarkable combination of high one-tone saturated output power density reaching 6.5 W/mm and two-tone OIP3/ $\textit{P}_{\text{DC}}$ of $\sim$ 6.1 dB, achieved at a biased drain voltage of 25 V. The experimental results provide compelling evidence of the attractiveness of the multi- $\textit{V}_{\text{Ths}}$ coupling technique for millimeter wave RF transmitters.


  • Influence of Transverse Geometry of Sidewall Gates on Characteristics of AlGaN/GaN Fin-HEMTs

    by Yilin Chen, Qing Zhu, Meng Zhang, Minhan Mi, Jiejie Zhu, Siyin Guo, Yuwei Zhou, Pengfei Wang, Can Gong, Ziyue Zhao, et al.

    This article investigates the influence of transverse geometry of sidewall gates on characteristics of AlGaN/GaN Fin-high-electron-mobility transistors (HEMTs) with rectangular HEMTs (RG-HEMTs), divergent HEMTs (DG-HEMTs), and convergent HEMTs (CG-HEMTs) sidewall gate structure. The subthreshold characteristics of the three types of devices have been compared. The pinch-off voltage of the DG-HEMTs and CG-HEMTs exhibits a slightly positive shift compared to RG-HEMTs, indicating that the pinch-off voltage depended on the smallest nanochannel width in Fin-HEMTs. What’s more, the DG-HEMT exhibits a pronounced depletion effect on channel electrons, and an enhanced gate control capability, improving the threshold voltage stability and suppressing the short-channel effects. At the source side in the channel under the gate, a high electron barrier was been observed in the DG-HEMTs, effectively blocking the injection of carriers from the source into the channel as the drain voltage increased. Additionally, at the corner from the assess region to the channel, the DG-HEMTs displayed the fastest potential rise. The effective electron transport has been enhanced in the channel, making it possible to reach an enhanced electron velocity along most of the channel length, leading to a reduced knee voltage. This conclusion has been validated through simulations of Fin-HEMTs with different channel widths. Furthermore, the DG-HEMT delivers improved DE and PAE at V $_{\text{DC}}$ $=$ 9 V.


  • Influence of Upper Channel Thickness on InAlN/GaN/InAlN/GaN Double Channel HEMT

    by Yilin Chen, Siyin Guo, Meng Zhang, Qing Zhu, Ziyue Zhao, Xiaohua Ma

    HEMTs featuring a double heterostructure (DC-HEMTs) hold considerable promise for diverse applications, owing to their exceptional output characteristics. In this work, the influence of upper channel thickness on carrier distribution and the DC and RF characteristics of the DC-HEMTs was investigated. As the upper channel thickness decreases gradually, the 2-DEG density in the upper channel decreases, while it increases in the lower channel. These result in corresponding variations in transconductance peaks, f T , and f max . Furthermore, the varying effects of drain voltage on carrier concentration in both the upper and lower channels, introduce a novel dimension to the understanding of DC-HEMT characteristics. The observed trends offer crucial considerations for optimizing the design and performance of DC-HEMTs across various applications.

  • Investigation of multi-fingers drain field plate in dual-threshold coupling AlGaN/GaN high electron mobility transistors for optimizing linearity at high electrical fields in the Ka band

    by Pengfei Wang, Minhan Mi, Yilin Chen, Sirui An, Yuwei Zhou, Jiuding Zhou, Ziyue Zhao, Qing Zhu, Xiang Du, Can Gong, et al.

    GaN high electron mobility transistors were fabricated and investigated in detail to improve their linearity at high operating voltage. The scheme of dual-threshold (DT) coupling was adopted to mitigate the transconductance (G m) nonlinearity and a multi-fingers drain field plate (MF-DFP) was employed to alleviate the high electric field. The proposed GaN HEMT, integrating the DT technique (DT HEMT) and MF-DFP structure (DT HEMT W/ MF-DFP), yielded a G m plateau of ∼5.5 V and a ∼8 dB improvement in the calculated output third-order intercept point(OIP3) than that of DT HEMT. The load-pull measurements at 30 GHz delivered a peak power-added efficiency (PAE) of 52.5 % at V ds = 10 V, and saturation output power density (P out) of 5.5 W mm−1 at V ds = 20 V. In comparison with the DT HEMT, the DT HEMT W/ MF-DFP obtained a flatter gain profile, with ∼1.5 dB improvement in gain compression at V ds = 20 V.


  • Tri-Gate Normally-Off AlN/GaN HEMTs With 2.36 W/mm of Power Density and 67.5% Power-Added-Efficiency at V d = 12 V

    by Jingshu Guo, Jiejie Zhu, Siyu Liu, Kai Cheng, Qing Zhu, Pengfei Wang, Kai Liu, Ziyue Zhao, Lingjie Qin, Yuxi Zhou, et al.

    In this letter, we present high-performance tri-gate normally-off HEMTs RF power devices using MOCVD-grown thin barrier SiN/AlN/GaN heterostructures. The normally-off devices exhibit alloyed Ohmic contact resistance of about $0.35 \Omega \cdot $ mm, low threshold-voltage of 0.2 V, very high output current of 1.61 A/mm, and high peak power added efficiency (PAE) of 67.5% with drain voltage ${(}{V}_{\text {d}}{)}$ of 12 V and frequency at 3.6 GHz. Owing to the high breakdown voltage of 159 V when gate bias at −4 V, the normally-off device shows a maximum output power of 5.96 W/mm at ${V}_{\text {d}}$ = 28 V with a peak PAE of over 50% and gain of over 20 dB. The SiN/AlN/GaN epi-structures and tri-gate normally-off HEMTs demonstrated in this work show promising potential for both low-voltage and high-voltage applications.