Zuoye Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zuoye Liu has a total of 129 co-authors. Here are the top co-authors by number of shared publications:
Bitao Hu
18 shared publicationsShaohua Sun
Frontiers Science Center for Rare Isotopes, State Key Laboratory of Chemistry for NBC Hazards Protection, School of Nuclear Science and Technology
13 shared publications- Bitao Hu
School of Nuclear Science and Technology, Lanzhou University, 730000, China
9 shared publications - Pengji Ding
Lanzhou University
7 shared publications Shujia Wu
Frontiers Science Center for Rare Isotopes, State Key Laboratory of Chemistry for NBC Hazards Protection, School of Nuclear Science and Technology
6 shared publicationsQuanjun Wang
School of Nuclear Science and Technology, Lanzhou University, Lanzhou, China
5 shared publications
Latest Publications
- 14 September 2026
- Published by American Physical Society (APS) in Physical Review A
- Vol. 114 (3) , 033108
Asymmetric ultrafast coherent dynamics of fine-structure resonances in Rb driven by chirped light fields
Ultrafast chirped pulses provide a powerful route to controlling coherent dynamics in multilevel atomic systems. In the strong field regime, however, the physical origin of spectral asymmetry is obscured by the combined effects of pulse chirp, timing linkage, and branch dependent couplings. Here we investigate the asymmetric coherent dynamics of fine structure resonances in rubidium driven by chirped femtosecond pulses. By combining femtosecond transient absorption measurements, transient-grating frequency-resolved optical gating (TG-FROG) pulse characterization, and an analytical three level model based on the Magnus expansion, we examine how chirped excitation reshapes the absorption response of the Rb D1 $(5{p}^{2}{P}_{1/2})$ and D2 $(5{p}^{2}{P}_{3/2})$ transitions. The measurements show that the observed spectral asymmetry depends not only on the sign of the chirp, but also on the group delay variation imposed by the compressor geometry. The asymmetry persists even after the timing linkage is compensated, which shows that it does not arise solely from the pump probe timing shift. Further analysis indicates that chirp acts mainly by modulating the phases of the relevant quantum pathways. This reshapes pathway interference and governs the asymmetric partition of the excited state population. These results establish an analytical framework for chirp based control of resonant responses in multilevel atomic systems and highlight the role of phase control in ultrafast quantum state manipulation.- 14 September 2026
- Published by American Physical Society (APS) in Physical Review A
- Vol. 114 (3) , 033108
Asymmetric ultrafast coherent dynamics of fine-structure resonances in Rb driven by chirped light fields
Ultrafast chirped pulses provide a powerful route to controlling coherent dynamics in multilevel atomic systems. In the strong field regime, however, the physical origin of spectral asymmetry is obscured by the combined effects of pulse chirp, timing linkage, and branch dependent couplings. Here we investigate the asymmetric coherent dynamics of fine structure resonances in rubidium driven by chirped femtosecond pulses. By combining femtosecond transient absorption measurements, transient-grating frequency-resolved optical gating (TG-FROG) pulse characterization, and an analytical three level model based on the Magnus expansion, we examine how chirped excitation reshapes the absorption response of the Rb D1 $(5{p}^{2}{P}_{1/2})$ and D2 $(5{p}^{2}{P}_{3/2})$ transitions. The measurements show that the observed spectral asymmetry depends not only on the sign of the chirp, but also on the group delay variation imposed by the compressor geometry. The asymmetry persists even after the timing linkage is compensated, which shows that it does not arise solely from the pump probe timing shift. Further analysis indicates that chirp acts mainly by modulating the phases of the relevant quantum pathways. This reshapes pathway interference and governs the asymmetric partition of the excited state population. These results establish an analytical framework for chirp based control of resonant responses in multilevel atomic systems and highlight the role of phase control in ultrafast quantum state manipulation.- 11 August 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (33) , 24167-24177
Diffusion Model-Driven Spectral Noise Modeling and Generative Reconstruction Strategy
Modern spectroscopic techniques struggle with quantitative accuracy in complex environments due to unavoidable noise and matrix interference. While machine learning (ML) can improve performance, its reliance on massive data sets contradicts the few-shot reality of industrial applications, where limited data exacerbates noise-induced overfitting. To address this challenge, this paper proposes the universal spectral noise modeling and generative reconstruction (SNMGR) strategy. This strategy builds upon diffusion probabilistic models to effectively suppress strong interference effects in few-shot scenarios through the deep integration of noise interference modeling and generative reconstruction. To verify the effectiveness of SNMGR, this study conducts experiments using the quantitative analysis of lithium ore via femtosecond LIBS as a typical case. The research constructs the generative model based solely on 7 calibration samples totaling 210 spectra and systematically compares the quantitative performance of five mainstream ML models with distinct architectures on 3 unknown test samples. The results indicate that the integration with SNMGR enables the quantitative prediction accuracy of all five models to achieve significant and consistent improvements over their baseline counterparts. Taking the CNN-SNMGR model as an example, its predictive mean absolute error drops substantially from 1.801 ppk to 0.611 ppk representing a decrease of 66.06%, while the root-mean-square error decreases from 2.226 ppk to 0.778 ppk representing a decrease of 65.05%. This study demonstrates that SNMGR provides a viable solution for spectral interference correction under resource-constrained conditions. Furthermore, its universality in coupling with various ML models opens a new pathway for the large-scale implementation of spectral quantitative technologies in complex industrial environments.
- 11 August 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (33) , 24167-24177
Diffusion Model-Driven Spectral Noise Modeling and Generative Reconstruction Strategy
Modern spectroscopic techniques struggle with quantitative accuracy in complex environments due to unavoidable noise and matrix interference. While machine learning (ML) can improve performance, its reliance on massive data sets contradicts the few-shot reality of industrial applications, where limited data exacerbates noise-induced overfitting. To address this challenge, this paper proposes the universal spectral noise modeling and generative reconstruction (SNMGR) strategy. This strategy builds upon diffusion probabilistic models to effectively suppress strong interference effects in few-shot scenarios through the deep integration of noise interference modeling and generative reconstruction. To verify the effectiveness of SNMGR, this study conducts experiments using the quantitative analysis of lithium ore via femtosecond LIBS as a typical case. The research constructs the generative model based solely on 7 calibration samples totaling 210 spectra and systematically compares the quantitative performance of five mainstream ML models with distinct architectures on 3 unknown test samples. The results indicate that the integration with SNMGR enables the quantitative prediction accuracy of all five models to achieve significant and consistent improvements over their baseline counterparts. Taking the CNN-SNMGR model as an example, its predictive mean absolute error drops substantially from 1.801 ppk to 0.611 ppk representing a decrease of 66.06%, while the root-mean-square error decreases from 2.226 ppk to 0.778 ppk representing a decrease of 65.05%. This study demonstrates that SNMGR provides a viable solution for spectral interference correction under resource-constrained conditions. Furthermore, its universality in coupling with various ML models opens a new pathway for the large-scale implementation of spectral quantitative technologies in complex industrial environments.
- 7 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (19) , 19810-19826
Time-Space-Medium Collaboratively Modulated LIBS Combined with Matrix Dilution: From Self-Absorption to Isotope Discrimination of Lithium
In response to the urgent need to address global climate change and achieve deep decarbonization of energy systems, clean energy technologies are undergoing transformative advancement. Within this context, a remote, in situ, and rapid technology for high-precision isotopic analysis of lithium is critical for nuclear energy systems due to their critical role in ensuring the safe operation of nuclear fission systems and in situ breeding of fusion fuel, yet conventional Laser-Induced Breakdown Spectroscopy (LIBS) suffers from severe self-absorption and dense plasma broadening that obscure the minute isotopic shifts (∼15 pm). To overcome this longstanding challenge, we propose a time-space-medium collaboratively modulated LIBS (TSMM-LIBS) approach combined with a matrix dilution strategy to actively regulate the plasma environment and thoroughly suppress self-reversal. A novel self-reversal indicator (SRI) was defined to quantify the degree of self-reversal, and a wing-side recovery algorithm coupled with the Beer-Lambert law was utilized to successfully invert highly distorted absorption dips into effective emission peaks. As a major breakthrough, the lithium doublet structure and its isotopic shifts (670.776 nm for 7Li D2, 670.791 nm for 7Li D1 and 6Li D2, and 670.807 nm for 6Li D1) were simultaneously resolved for the first time in LIBS. The synergistic modulation significantly compressed the spectral full width at half-maximum (fwhm) to 25.65 pm and Stark broadening (ωStark) to 3.87 pm, achieving sub-Doppler resolution and approaches the intrinsic emission quality of a hollow cathode lamp (HCL). Furthermore, an Effective Concentration Model with Self-Absorption Correction (ECM-SAC) was established based on the Lomakin-Schaefer formula and quantum mechanical transition probabilities. Cross-validation demonstrated exceptional quantitative accuracy across wide isotopic abundance gradients for both Li2TiO3 solid ceramics and lithium solution samples. The optimal spectral intensity ratio (670.776/670.807 nm) yielded a root-mean-square error of cross-validation (RMSECV) of 0.041 and a remarkably high ratio of performance to deviation (RPD) of 6.561. This work establishes a rapid, in situ, and high-precision analytical framework for lithium isotope discrimination, holding substantial promise for nuclear material cycle management and monitoring of tritium breeding material in fusion reactors.
- 7 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (19) , 19810-19826
Time-Space-Medium Collaboratively Modulated LIBS Combined with Matrix Dilution: From Self-Absorption to Isotope Discrimination of Lithium
In response to the urgent need to address global climate change and achieve deep decarbonization of energy systems, clean energy technologies are undergoing transformative advancement. Within this context, a remote, in situ, and rapid technology for high-precision isotopic analysis of lithium is critical for nuclear energy systems due to their critical role in ensuring the safe operation of nuclear fission systems and in situ breeding of fusion fuel, yet conventional Laser-Induced Breakdown Spectroscopy (LIBS) suffers from severe self-absorption and dense plasma broadening that obscure the minute isotopic shifts (∼15 pm). To overcome this longstanding challenge, we propose a time-space-medium collaboratively modulated LIBS (TSMM-LIBS) approach combined with a matrix dilution strategy to actively regulate the plasma environment and thoroughly suppress self-reversal. A novel self-reversal indicator (SRI) was defined to quantify the degree of self-reversal, and a wing-side recovery algorithm coupled with the Beer-Lambert law was utilized to successfully invert highly distorted absorption dips into effective emission peaks. As a major breakthrough, the lithium doublet structure and its isotopic shifts (670.776 nm for 7Li D2, 670.791 nm for 7Li D1 and 6Li D2, and 670.807 nm for 6Li D1) were simultaneously resolved for the first time in LIBS. The synergistic modulation significantly compressed the spectral full width at half-maximum (fwhm) to 25.65 pm and Stark broadening (ωStark) to 3.87 pm, achieving sub-Doppler resolution and approaches the intrinsic emission quality of a hollow cathode lamp (HCL). Furthermore, an Effective Concentration Model with Self-Absorption Correction (ECM-SAC) was established based on the Lomakin-Schaefer formula and quantum mechanical transition probabilities. Cross-validation demonstrated exceptional quantitative accuracy across wide isotopic abundance gradients for both Li2TiO3 solid ceramics and lithium solution samples. The optimal spectral intensity ratio (670.776/670.807 nm) yielded a root-mean-square error of cross-validation (RMSECV) of 0.041 and a remarkably high ratio of performance to deviation (RPD) of 6.561. This work establishes a rapid, in situ, and high-precision analytical framework for lithium isotope discrimination, holding substantial promise for nuclear material cycle management and monitoring of tritium breeding material in fusion reactors.
- Open Access
High-Accuracy and Efficient Classification of Uranium Slag by Origin and Category via LIBS Integrated with Hybrid Machine Learning
Accurate classification of uranium slag origin and category is essential for nuclear environmental monitoring and safety. This study presents a hybrid framework combining laser-induced breakdown spectroscopy (LIBS), four preprocessing methods, and five machine learning algorithms for rapid uranium slag classification. A total of nine sample categories were collected from three mining areas, with categories defined by their U concentration levels within each origin. Standard normal variate (SNV), Savitzky–Golay smoothing (SG), and their combinations (SNV-SG, SG-SNV) were applied to evaluate preprocessing effects. To address ultra-high-dimensional spectral data (49,242 points per spectrum), principal component analysis (PCA) and random forest (RF) were employed for feature engineering, integrated with support vector machine (SVM), linear discriminant analysis (LDA), and K-nearest neighbors (KNN) classifiers. Hyperparameter optimization via five-fold cross-validation and Bayesian optimization enhanced accuracy and efficiency. RF-based hybrid models consistently outperformed PCA-based counterparts. Remarkably, the RF-LDA model with SNV-SG preprocessing achieved 100% classification accuracy across all test sets with a processing time of only 10.46 s, demonstrating exceptional discriminative power and computational efficiency. These findings establish that combining RF feature selection with advanced machine learning offers a robust solution for LIBS-based nuclear material classification, with significant implications for both nuclear safety and resource management.
Open AccessHigh-Accuracy and Efficient Classification of Uranium Slag by Origin and Category via LIBS Integrated with Hybrid Machine Learning
Accurate classification of uranium slag origin and category is essential for nuclear environmental monitoring and safety. This study presents a hybrid framework combining laser-induced breakdown spectroscopy (LIBS), four preprocessing methods, and five machine learning algorithms for rapid uranium slag classification. A total of nine sample categories were collected from three mining areas, with categories defined by their U concentration levels within each origin. Standard normal variate (SNV), Savitzky–Golay smoothing (SG), and their combinations (SNV-SG, SG-SNV) were applied to evaluate preprocessing effects. To address ultra-high-dimensional spectral data (49,242 points per spectrum), principal component analysis (PCA) and random forest (RF) were employed for feature engineering, integrated with support vector machine (SVM), linear discriminant analysis (LDA), and K-nearest neighbors (KNN) classifiers. Hyperparameter optimization via five-fold cross-validation and Bayesian optimization enhanced accuracy and efficiency. RF-based hybrid models consistently outperformed PCA-based counterparts. Remarkably, the RF-LDA model with SNV-SG preprocessing achieved 100% classification accuracy across all test sets with a processing time of only 10.46 s, demonstrating exceptional discriminative power and computational efficiency. These findings establish that combining RF feature selection with advanced machine learning offers a robust solution for LIBS-based nuclear material classification, with significant implications for both nuclear safety and resource management.
- 5 March 2026
- Published by Elsevier in Physics Letters A
- Vol. 581
An extensional study of charge resonance enhanced ionization of polyatomic molecule in strong laser fields: CH3Cl
- 5 March 2026
- Published by Elsevier in Physics Letters A
- Vol. 581
An extensional study of charge resonance enhanced ionization of polyatomic molecule in strong laser fields: CH3Cl
- 13 February 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (4) , 6513-6527
Spatiotemporal dynamics of femtosecond laser-induced thermal grating scattering of a continuous-wave laser
Laser-induced grating scattering (LIGS) is a robust optical technique for measuring thermodynamic parameters, such as temperature, pressure, and thermal diffusivity, in gaseous and liquid media. While conventional LIGS research primarily focuses on temporally-resolved signal extraction, the spatial dynamics of the signal beam are rarely studied due to its inherent weak brightness. The recent advent of femtosecond LIGS (fs-LIGS) generates a strong, visibly bright signal, providing what we believe to be a novel opportunity to explore these spatial dynamics. In this work, we systematically investigated the influence of pump pulse energy, medium temperature, and relative pump polarization on the spatiotemporal dynamics of the fs-LIGS signal. Our key findings show that both increasing pump laser energy and medium temperature induce a consistent spatial shift of the fs-LIGS signal away from the probe beam, driven by self-focusing effects. Furthermore, while the signal oscillation frequency remains stable with increasing pump energies, high-temperature gradients were found to overestimate thermometry results. Besides, the variation in relative pump polarization, although causing signal intensity fluctuation, does not affect the spatial dynamics or oscillation frequency, thus preserving thermometry accuracy. Based on a simplified analytical model, the above experimental observations were qualitatively explained. These results offer new insights into the interplay between nonlinear optical effects and signal formation, with direct implications for optimizing diagnostic precision in the fs-LIGS technique practice.
- 13 February 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (4) , 6513-6527
Spatiotemporal dynamics of femtosecond laser-induced thermal grating scattering of a continuous-wave laser
Laser-induced grating scattering (LIGS) is a robust optical technique for measuring thermodynamic parameters, such as temperature, pressure, and thermal diffusivity, in gaseous and liquid media. While conventional LIGS research primarily focuses on temporally-resolved signal extraction, the spatial dynamics of the signal beam are rarely studied due to its inherent weak brightness. The recent advent of femtosecond LIGS (fs-LIGS) generates a strong, visibly bright signal, providing what we believe to be a novel opportunity to explore these spatial dynamics. In this work, we systematically investigated the influence of pump pulse energy, medium temperature, and relative pump polarization on the spatiotemporal dynamics of the fs-LIGS signal. Our key findings show that both increasing pump laser energy and medium temperature induce a consistent spatial shift of the fs-LIGS signal away from the probe beam, driven by self-focusing effects. Furthermore, while the signal oscillation frequency remains stable with increasing pump energies, high-temperature gradients were found to overestimate thermometry results. Besides, the variation in relative pump polarization, although causing signal intensity fluctuation, does not affect the spatial dynamics or oscillation frequency, thus preserving thermometry accuracy. Based on a simplified analytical model, the above experimental observations were qualitatively explained. These results offer new insights into the interplay between nonlinear optical effects and signal formation, with direct implications for optimizing diagnostic precision in the fs-LIGS technique practice.
- 22 November 2025
- Published by Springer Nature in Applied Physics B
- Vol. 131 (12) , 237
Spectral enhancement of narrowband XUV pulses at variable frequencies in helium
- 22 November 2025
- Published by Springer Nature in Applied Physics B
- Vol. 131 (12) , 237
Spectral enhancement of narrowband XUV pulses at variable frequencies in helium
- 16 October 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (43) , 24031-24039
Achieving Low-Energy fs-LIBS with a Microwave Plasma Torch: A Feasible Method for the Development of a Portable fs-LIBS Measurement System
This study introduces an MPT-fs-LIBS system, combining femtosecond laser-induced breakdown spectroscopy (fs-LIBS) with a microwave plasma torch (MPT), to enhance the fs-LIBS performance under low laser pulse energy. By using femtosecond laser pulses and MPT-generated plasma, the system reduces the Cu/Zn alloys' breakdown threshold to 1 μJ and enhances the plasma emission intensity and stability. The spectral signals of Cu/Zn alloys measured via 30 μJ MPT-fs-LIBS exceed those from 1.5 mJ fs-LIBS, indicating reliable elemental detection at lower laser energies. Time-resolved spectra show that MPT enhances plasma behavior by extending its lifetime and raising electron temperature. The 30 μJ MPT-fs-LIBS creates smaller ablation craters than 1.5 mJ fs-LIBS, enabling near-nondestructive testing of industrial materials. The system demonstrates an excellent analytical performance for Al alloys. At the same laser energy, MPT-fs-LIBS has higher intensities for emission lines of Mg II 279.55 nm, Cu I 324.75 nm, Mn I 403.11 nm, and Cr I 425.42 nm than fs-LIBS. Compared to 1.5 mJ fs-LIBS, 1.5 mJ MPT-fs-LIBS reduces trace metals' (e.g., Mg) limit of detection (LOD) by 130 times, while 30 μJ MPT-fs-LIBS lowers it by 17 times. Glass sample tests suggest the method's wide applicability, with 30 μJ MPT-fs-LIBS outperforming 1.5 mJ fs-LIBS. The compact MPT-fs-LIBS avoids complex optical setups and specialized vacuum sample chambers. This method provides a practical way to integrate compact femtosecond fiber lasers with MPT, enabling portable devices for real-time multielement analysis while minimizing sample damage.
- 16 October 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (43) , 24031-24039
Achieving Low-Energy fs-LIBS with a Microwave Plasma Torch: A Feasible Method for the Development of a Portable fs-LIBS Measurement System
This study introduces an MPT-fs-LIBS system, combining femtosecond laser-induced breakdown spectroscopy (fs-LIBS) with a microwave plasma torch (MPT), to enhance the fs-LIBS performance under low laser pulse energy. By using femtosecond laser pulses and MPT-generated plasma, the system reduces the Cu/Zn alloys' breakdown threshold to 1 μJ and enhances the plasma emission intensity and stability. The spectral signals of Cu/Zn alloys measured via 30 μJ MPT-fs-LIBS exceed those from 1.5 mJ fs-LIBS, indicating reliable elemental detection at lower laser energies. Time-resolved spectra show that MPT enhances plasma behavior by extending its lifetime and raising electron temperature. The 30 μJ MPT-fs-LIBS creates smaller ablation craters than 1.5 mJ fs-LIBS, enabling near-nondestructive testing of industrial materials. The system demonstrates an excellent analytical performance for Al alloys. At the same laser energy, MPT-fs-LIBS has higher intensities for emission lines of Mg II 279.55 nm, Cu I 324.75 nm, Mn I 403.11 nm, and Cr I 425.42 nm than fs-LIBS. Compared to 1.5 mJ fs-LIBS, 1.5 mJ MPT-fs-LIBS reduces trace metals' (e.g., Mg) limit of detection (LOD) by 130 times, while 30 μJ MPT-fs-LIBS lowers it by 17 times. Glass sample tests suggest the method's wide applicability, with 30 μJ MPT-fs-LIBS outperforming 1.5 mJ fs-LIBS. The compact MPT-fs-LIBS avoids complex optical setups and specialized vacuum sample chambers. This method provides a practical way to integrate compact femtosecond fiber lasers with MPT, enabling portable devices for real-time multielement analysis while minimizing sample damage.
- 17 June 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (23)
An investigation of the dynamics of the ionization/dissociation in SF6 with femtosecond pulses
We systematically investigated the ionization and dissociation of SF6 in strong laser fields. The dependence of ion yield on laser intensity and the kinetic energy distributions and angular distributions of fragment ions were also measured. The observed sequence of fragment ions is consistent with the predictions of strong-field ionization theory. The kinetic energy distributions of the Fq+ (q = 1–3) fragment ions are presented. Using a point charge model, we propose that the structure-symmetric dissociation (SSD) explains the origin of the kinetic energy of Fq+ ions. Furthermore, we identify the relevant channels and the kinetic energies of the Fq+ fragment ions produced by these channels. These results are in excellent agreement with the experimental data. The angular distributions of the Fq+ and Sq+ (q = 3, 5) ions are all anisotropic and isotropic, respectively. This is the result of the SSD process of the parent ion. However, the anisotropic component in the angular distribution of SFn+ (n = 1–4), SFn2+ (n = 2, 4), and Sq+ (q = 1, 2) suggests that the molecular structure has undergone deformation by the presence of the laser field. A comparison of the time-of-flight (TOF) spectra of fragment ions under linearly polarized and circularly polarized laser fields reveals that the SF6 molecule exhibits negligible dynamic alignment in the laser field, with geometric alignment being the dominant mechanism. Furthermore, the rescattering process plays a significant role in the production of SFn2+ (n = 2, 4) ions. The dynamics of the ionization/dissociation mechanism are discussed in the context of the TOF mass spectra, kinetic energies, and angular distributions recorded for SF6.
- 17 June 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (23)
An investigation of the dynamics of the ionization/dissociation in SF6 with femtosecond pulses
We systematically investigated the ionization and dissociation of SF6 in strong laser fields. The dependence of ion yield on laser intensity and the kinetic energy distributions and angular distributions of fragment ions were also measured. The observed sequence of fragment ions is consistent with the predictions of strong-field ionization theory. The kinetic energy distributions of the Fq+ (q = 1–3) fragment ions are presented. Using a point charge model, we propose that the structure-symmetric dissociation (SSD) explains the origin of the kinetic energy of Fq+ ions. Furthermore, we identify the relevant channels and the kinetic energies of the Fq+ fragment ions produced by these channels. These results are in excellent agreement with the experimental data. The angular distributions of the Fq+ and Sq+ (q = 3, 5) ions are all anisotropic and isotropic, respectively. This is the result of the SSD process of the parent ion. However, the anisotropic component in the angular distribution of SFn+ (n = 1–4), SFn2+ (n = 2, 4), and Sq+ (q = 1, 2) suggests that the molecular structure has undergone deformation by the presence of the laser field. A comparison of the time-of-flight (TOF) spectra of fragment ions under linearly polarized and circularly polarized laser fields reveals that the SF6 molecule exhibits negligible dynamic alignment in the laser field, with geometric alignment being the dominant mechanism. Furthermore, the rescattering process plays a significant role in the production of SFn2+ (n = 2, 4) ions. The dynamics of the ionization/dissociation mechanism are discussed in the context of the TOF mass spectra, kinetic energies, and angular distributions recorded for SF6.
- 28 May 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (11) , 23740-23754
Simultaneous measurement of temperature and pressure using deep-learning-assisted femtosecond laser-induced scattering technique
Femtosecond laser-induced grating scattering (fs-LIGS) technique has emerged as a robust diagnostic technique for combustion flow field characterization, particularly in temperature and pressure measurements. This study investigates four deep learning architectures for the simultaneous prediction of gas-phase temperature and pressure from raw fs-LIGS signals, including fully connected neural networks (FCNN), convolutional neural networks (CNN), bidirectional long short-term memory networks (BiLSTM), and a hybrid CNN-BiLSTM model. All architectures demonstrated exceptional predictive accuracy, achieving mean percentage errors ranging from −3.94% to 0.32% for temperature estimation and −0.26% to 1.09% for pressure estimation. The detailed comparison of the four models suggests that the LSTM structures have better adaptability for the measurements of temperature and pressure. In contrast the, CNN-BiLSTM model demonstrated superior overall performance in terms of predictive accuracy, cross-validation robustness, convergence rate, memory requirements, etc. Successful integration of these deep learning approaches with an fs-LIGS system would establish a novel framework for real-time, multi-parameter combustion diagnostics.
- 28 May 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (11) , 23740-23754
Simultaneous measurement of temperature and pressure using deep-learning-assisted femtosecond laser-induced scattering technique
Femtosecond laser-induced grating scattering (fs-LIGS) technique has emerged as a robust diagnostic technique for combustion flow field characterization, particularly in temperature and pressure measurements. This study investigates four deep learning architectures for the simultaneous prediction of gas-phase temperature and pressure from raw fs-LIGS signals, including fully connected neural networks (FCNN), convolutional neural networks (CNN), bidirectional long short-term memory networks (BiLSTM), and a hybrid CNN-BiLSTM model. All architectures demonstrated exceptional predictive accuracy, achieving mean percentage errors ranging from −3.94% to 0.32% for temperature estimation and −0.26% to 1.09% for pressure estimation. The detailed comparison of the four models suggests that the LSTM structures have better adaptability for the measurements of temperature and pressure. In contrast the, CNN-BiLSTM model demonstrated superior overall performance in terms of predictive accuracy, cross-validation robustness, convergence rate, memory requirements, etc. Successful integration of these deep learning approaches with an fs-LIGS system would establish a novel framework for real-time, multi-parameter combustion diagnostics.