AGAkkala Arun Goud

Akkala Arun Goud

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Akkala Arun Goud has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Asymmetric Underlapped FinFETs for Near- and Super-Threshold Logic at Sub-10nm Technology Nodes

    by A. Arun Goud, Rangharajan Venkatesan, Anand Raghunathan, Kaushik Roy

    Extending double-gate FinFET scaling to sub-10nm technology regime requires device-engineering techniques for countering the rise of direct source to drain tunneling (DSDT), edge direct tunneling (EDT) and short channel effects (SCE) that degrade FinFET I-V characteristics. Symmetric underlap is effective for eliminating EDT, diminishing DSDT, and lowering the fringe component of gate capacitance. However, excessive symmetric underlap also lowers the on-current, which is mainly due to thermionic emission. In this work, it is demonstrated that at sub-10nm node, asymmetric underlapped FinFETs with slightly longer underlap toward drain side than source side are superior to symmetric underlapped FinFETs due to further improvement in Ion/Ioffand reduction in gate-to-drain capacitance. Using quantum mechanical device simulations, FinFETs with various degrees of underlap have been analyzed for improvement in I-V characteristics. A FinFET model for circuit simulations has been constructed that captures the major sub-10nm leakage components, namely, thermionic emission, DSDT, EDT, direct gate oxide tunneling and its associated components. By simulating a 10-stage NAND circuit and a LEON3 processor with interconnect parasitics using these devices, it is shown that asymmetric underlap instead of symmetric underlap in sub-10nm FinFETs can offer lower energy consumption with improved performance for near-threshold logic and higher energy-efficiency for super-threshold logic operation.


  • Source-Underlapped GaSb–InAs TFETs With Applications to Gain Cell Embedded DRAMs

    by Ankit Sharma, Arun Goud Akkala, Jaydeep P. Kulkarni, Kaushik Roy

    In this paper, a detailed evaluation of sub-10-nm n-/p-type GaSb-InAs double-gate tunneling FETs (TFETs) is presented. Source underlapping is shown to achieve lower subthreshold swing (SS) in both nand p-type GaSb-InAs TFETs and is verified with the analytical treatment. The impact of parameter variations on the performance of underlapped TFETs is investigated through atomistic, 2-D ballistic simulations using self-consistently coupled nonequilibrium Green's function-Poisson approach. Variations in underlap length, underlap doping, fin thickness, and temperature are comprehensively studied. It is shown that the underlap length of 6 nm is optimal for achieving low SS and it is found that the underlapped TFETs can maintain sub-60-mV/decade SS even when 3-nm fin thickness is relaxed by 40%. We also study the potential of TFETs in ultralow-power and high-density dynamic memories. A novel 4T gain cell embedded Dynamic Random Access Memory (e-DRAM) is proposed, which utilizes the low-leakage current of the source-underlapped TFETs to improve the data-retention time to 25 μs at V DD = 0.35 V, thereby enabling the prospects of e-DRAM at nanoscale gate lengths operating at ultralow supply voltages.


  • Asymmetric Underlapped Sub-10-nm n-FinFETs for High-Speed and Low-Leakage 6T SRAMs

    by Arun Goud Akkala, Rangharajan Venkatesan, Anand Raghunathan, Kaushik Roy

    A 6T SRAM design at a sub-10-nm node calls for carefully designed transistors so that new leakage mechanisms, such as direct source-to-drain tunneling (DSDT) and short channel effects that lead to I ON /I OFF degradation, are kept under control. In this paper, we explore asymmetric underlap for mitigating DSDT, thermionic leakage, and for improving I ON /I OFF of double-gate FinFETs. We demonstrate that for 6T SRAMs, asymmetric underlapped n-FinFETs are superior to symmetric underlap/overlap in improving access time and leakage power. We model the atomistic nature of sub-10-nm FinFET channels, quantum confinement, subband nonparabolicity, and anisotropy latent at such length scales using quantum physics-based simulators instead of the conventional semiclassical, drift-diffusion-based Technology Computer Aided Design tools. Using a device/circuit/system-level codesign approach consisting of NEMO5 quantum mechanical device simulations, HSPICE circuit simulations of a 6T SRAM bit cell, and a system-level analysis of a 8-kB L1 and 4-MB L2 cache, we show that the adoption of optimized asymmetric underlapped n-FinFETs can offer up to 6.5% improvement in L1 cache access times and a 2.3-mW reduction in L2 cache leakage power, while delivering noise margins close to symmetric underlapped n-FinFET-based caches.


  • P-channel Tunneling Field Effect Transistor (TFET): Sub-10nm technology enablement by GaSb-InAs with doped source underlap

    by Ankit Sharma, A. Arun Goud, Kaushik Roy

    Summary form only given. This work proposes sub-10nm p-TFET showing sub-60 mv/dec SS for several orders of current. An 8-T SRAM cell evaluation indicates that TFETs can perform like FinFETs near-threshold voltages while consuming 100x lower standby power.


  • Asymmetric Underlapped FinFET Based Robust SRAM Design at 7nm Node

    by A. Arun Goud, Rangharajan Venkatesan, Anand Raghunathan, Kaushik Roy


  • GaSb-InAs n-TFET With Doped Source Underlap Exhibiting Low Subthreshold Swing at Sub-10-nm Gate-Lengths

    by Ankit Sharma, Akkala Arun Goud, Kaushik Roy

    In this letter, a sub-10-nm n-type GaSb-InAs heterojuction tunnel field-effect transistor (Het-j TFET), having n + -doped underlap layer of InAs between source and channel is proposed, which exhibits low subthreshold swing (SS) over a large range of currents. The proposed device is compared with conventional p-i-n GaSb-InAs Het-j TFET having the same physical gate length of 9 nm. Using ballistic tight binding-based Non-Equilibrium Green's Function (NEGF)-Poisson quantum simulations, we present I D - V GS curves and band diagrams for both the devices and provide analytical justification for the observed improvement in the SS. We also study the variations in device characteristics due to the length and doping of the underlap layer in the proposed device. It is observed that an underlap length of 6 nm is optimal to achieve a low SS in the proposed device.


  • Atomistic tight-binding based evaluation of impact of gate underlap on source to drain tunneling in 5 nm gate length Si FinFETs

    by A. Arun Goud, Sumeet Kumar Gupta, Sri Harsha Choday, Kaushik Roy

    The excellent control over short channel effects achievable using FinFETs have made them an attractive choice for realizing low-power and robust logic circuits and SRAMs in ultra-scaled technologies [1]. For deeply scaled gate lengths of the order of 5nm, increased direct source to drain tunneling (DSDT) is expected to contribute significantly to the off-state leakage current [2]. Gate underlap has been previously investigated as an effective way to reduce the thermionic component of leakage current since it increases the effective channel length. A variant of this, the asymmetric drain underlap was found to not only mitigate the leakage problem but also allowed for independent optimization of 6T SRAM read and write noise margins [3]. In this work, the impact of gate underlap on DSDT component of the off-state leakage current has been studied by using atomistic sp3d5s* tight binding based quantum ballistic coupled Poisson-NEGF transport simulations.


  • Design space exploration of FinFETs in sub-10nm technologies for energy-efficient near-threshold circuits

    by Sumeet Kumar Gupta, Woo-Suhl Cho, A. Arun Goud, Karthik Yogendra, Kaushik Roy

    Near-threshold (near-VTH) operation of circuits by scaling the supply voltage (VDD) leads to maximum energy efficiency of the digital systems [1]. However, since the device characteristics are different in super-threshold (super-VTH) and near-VTH regions, devices optimized for standard VDD operation may be sub-optimal for low VDD operation [2]. Hence, there is a need to perform circuit-aware device design for near-VTH transistors. In this paper, we explore the design space of transistors in deeply scaled technologies (nominal gate length of 5nm) for nearVTH operation. We choose FinFETs for our study due to their excellent short channel characteristics. A detailed analysis of device circuit interactions is carried out using our simulation framework based on tight-binding bandstructure calculations, quantum ballistic models for devices and circuit simulations in HSPICE. We show the dependence of energy dissipation in near-VTH circuits on different device parameters. Based on our analysis, we discuss the design methodology for near-VTH devices.