Siqi Hu
Research Subjects
Siqi Hu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Le Mi
Key Laboratory of Space Laser Communication and Detection Technology, Shanghai Institute of Optics and Fine Mechanics, 390 Qinghe Road, Jiading District, Shanghai, China
3 shared publicationsHuijie Liu
Shanghai Engineering Center for Microsatellites
2 shared publications- Tianhua Zhou
Shanghai Institute of Optics and Fine Mechanics
2 shared publications Weibiao Chen
Chinese Academy of Sciences, Shanghai Institute of Optics and Fine Mechanics, Key Laboratory of Space Laser Communication and Detection Technology, Jiading District, Shanghai, China
2 shared publicationsCaixia Cao
Innovation Academy for Microsatellites of CAS
1 shared publication- Errui Ma
Shanghai Satellite Network Research Institute Co., Ltd., Shanghai, China
1 shared publication
Latest Publications
- Open Access
- 27 December 2024
- Published by Association for Computing Machinery (ACM)
- p. 198-203
Inter-Satellite Laser Communication Tracking System Based on Digitally-Driven Stepping Motors
With the increasing deployment of large low Earth orbit (LEO) satellite constellations, inter-satellite laser (ISL) communication has emerged as a key technology to enhance satellite network efficiency. However, the traditional process for establishing ISL links on-orbit involves significant manual adjustments, resulting in inefficiencies. This paper proposes a digital twin technology for an inter-satellite laser communication tracking system that utilizes digitally-driven stepping motors for enhanced precision and efficiency in laser link establishment. Simscape is used to create an integrated model, combining acquisition control programs, drive circuits, and stepping motors, enabling accurate simulation of dynamic system behavior. This method accurately simulates the dynamic performance of the tracking system, offering valuable simulation support for efficient laser link establishment in orbit, improving test efficiency, and accelerating the deployment of LEO constellations.
- 27 December 2024
- Published by Association for Computing Machinery (ACM)
- p. 198-203
Open AccessInter-Satellite Laser Communication Tracking System Based on Digitally-Driven Stepping Motors
With the increasing deployment of large low Earth orbit (LEO) satellite constellations, inter-satellite laser (ISL) communication has emerged as a key technology to enhance satellite network efficiency. However, the traditional process for establishing ISL links on-orbit involves significant manual adjustments, resulting in inefficiencies. This paper proposes a digital twin technology for an inter-satellite laser communication tracking system that utilizes digitally-driven stepping motors for enhanced precision and efficiency in laser link establishment. Simscape is used to create an integrated model, combining acquisition control programs, drive circuits, and stepping motors, enabling accurate simulation of dynamic system behavior. This method accurately simulates the dynamic performance of the tracking system, offering valuable simulation support for efficient laser link establishment in orbit, improving test efficiency, and accelerating the deployment of LEO constellations.
- 6 September 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (19) , 34362-34377
Multi-parameter influenced acquisition model with an in-orbit jitter for inter-satellite laser communication of the LCES system
With the development of large low earth orbit (LEO) communication constellations, the efficiency of laser inter-satellite link (ISL) establishing become the bottleneck for subsequent large-scale launch and rapid networking applications of LEO communication constellations. Hence, we establish the pointing jitter error structure of LEO communication experiment satellites (LCES) system. The error structure can be used to trace the source of errors and evaluate the in-orbit jitter. And we derive an analytical expression of the acquisition probability density function (PDF) which comprehensively considering the influence of the scanning region, the pointing jitter error, the overlap factor and the in-orbit jitter error. The multi-parameter influenced acquisition model is validated by Monte Carlo (MC) simulations and semi-physical tests. The results reveals that the multi-parameter influenced acquisition model can be used to guide the in-orbit ISL establishing.
- 6 September 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (19) , 34362-34377
Multi-parameter influenced acquisition model with an in-orbit jitter for inter-satellite laser communication of the LCES system
With the development of large low earth orbit (LEO) communication constellations, the efficiency of laser inter-satellite link (ISL) establishing become the bottleneck for subsequent large-scale launch and rapid networking applications of LEO communication constellations. Hence, we establish the pointing jitter error structure of LEO communication experiment satellites (LCES) system. The error structure can be used to trace the source of errors and evaluate the in-orbit jitter. And we derive an analytical expression of the acquisition probability density function (PDF) which comprehensively considering the influence of the scanning region, the pointing jitter error, the overlap factor and the in-orbit jitter error. The multi-parameter influenced acquisition model is validated by Monte Carlo (MC) simulations and semi-physical tests. The results reveals that the multi-parameter influenced acquisition model can be used to guide the in-orbit ISL establishing.
- Open Access
- 3 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 12 (4) , 1-10
The Link Attenuation Model Based on Monte Carlo Simulation for Laser Transmission in Fog Channel
Free space optical (FSO) systems were usually designed according to the link budget analysis. However, the previous link attenuation estimations for fog channel were not precise. The link budget would be distorted, and resulting in the robustness degeneration of FSO system. Therefore, it is necessary to establish an accurate link attenuation model of fog channel. The previous models were mainly adopted by the Beer-Lambert law, or by classical Monte Carlo simulation combined with the fog drop size distribution. Unfortunately, the estimation deviation was eventually not fall within the acceptable range for FSO link budget analysis. We established a link attenuation model based on Monte Carlo simulation and Kim formula. Our model took the influence of multiple scattering and receiving parameters into consideration, and without the measurement of the fog drop size distribution and scattering cross-sections. The fog experiment was set up to verify the analysis results. And the experiment results revealed that the estimation deviation RMSE (root mean square error) $<\!1$ , which validated the accuracy of link attenuation model. The link attenuation model can be used to strengthen the link budget analysis of FSO system and guide the parameter design of future FSO communication system under fog channel.
- 3 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 12 (4) , 1-10
Open AccessThe Link Attenuation Model Based on Monte Carlo Simulation for Laser Transmission in Fog Channel
Free space optical (FSO) systems were usually designed according to the link budget analysis. However, the previous link attenuation estimations for fog channel were not precise. The link budget would be distorted, and resulting in the robustness degeneration of FSO system. Therefore, it is necessary to establish an accurate link attenuation model of fog channel. The previous models were mainly adopted by the Beer-Lambert law, or by classical Monte Carlo simulation combined with the fog drop size distribution. Unfortunately, the estimation deviation was eventually not fall within the acceptable range for FSO link budget analysis. We established a link attenuation model based on Monte Carlo simulation and Kim formula. Our model took the influence of multiple scattering and receiving parameters into consideration, and without the measurement of the fog drop size distribution and scattering cross-sections. The fog experiment was set up to verify the analysis results. And the experiment results revealed that the estimation deviation RMSE (root mean square error) $<\!1$ , which validated the accuracy of link attenuation model. The link attenuation model can be used to strengthen the link budget analysis of FSO system and guide the parameter design of future FSO communication system under fog channel.
- 7 August 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (17) , 21685-21699
3588 attenuation lengths and 332 bits/photon underwater optical wireless communication based on photon-counting receiver with 256-PPM
We designed a photon-counting receiver system for long-distance underwater wireless laser communication at different code rate Reed-Solomon (RS) and low-density parity check (LDPC) codes. The symbol error rate (SER) performance of the LDPC and RS codes with different signal-to-noise ratios was analyzed. The effects of the background noise, pulse stretching, and frame synchronization were considered in our receiver system. A water tank experiment confirmed that the 1/2-code-rate RS (255,127) is an excellent coding strategy for communication distances in the range of 90–130 m in Jerlov II water. We constructed a communication link with a SER of 6.31 × 10−4 in a distance of 120-m distance in Jerlov II water for RS (255,127) with 256-pulse-position modulation (PPM) at bandwidth of 13.7 MHz. The maximum link loss was −136.8 dB at λ = 532 nm. The attenuation lengths Natt were 35.88, which were equal at link distances up to 249.2 m in clear ocean water (Jerlov IB water type). The photon counting receiver system can achieve a receiving performance of 3.32 bits/photon. To the best of our knowledge, this is the longest communication attenuation length ever reported under 1 mJ single pulse energy for a narrow field-of-view photon-counting receiver system.
- 7 August 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (17) , 21685-21699
3588 attenuation lengths and 332 bits/photon underwater optical wireless communication based on photon-counting receiver with 256-PPM
We designed a photon-counting receiver system for long-distance underwater wireless laser communication at different code rate Reed-Solomon (RS) and low-density parity check (LDPC) codes. The symbol error rate (SER) performance of the LDPC and RS codes with different signal-to-noise ratios was analyzed. The effects of the background noise, pulse stretching, and frame synchronization were considered in our receiver system. A water tank experiment confirmed that the 1/2-code-rate RS (255,127) is an excellent coding strategy for communication distances in the range of 90–130 m in Jerlov II water. We constructed a communication link with a SER of 6.31 × 10−4 in a distance of 120-m distance in Jerlov II water for RS (255,127) with 256-pulse-position modulation (PPM) at bandwidth of 13.7 MHz. The maximum link loss was −136.8 dB at λ = 532 nm. The attenuation lengths Natt were 35.88, which were equal at link distances up to 249.2 m in clear ocean water (Jerlov IB water type). The photon counting receiver system can achieve a receiving performance of 3.32 bits/photon. To the best of our knowledge, this is the longest communication attenuation length ever reported under 1 mJ single pulse energy for a narrow field-of-view photon-counting receiver system.
- 1 July 2017
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 56 (7) , 076101
Viterbi equalization for long-distance, high-speed underwater laser communication
In long-distance, high-speed underwater laser communication, because of the strong absorption and scattering processes, the laser pulse is stretched with the increase in communication distance and the decrease in water clarity. The maximum communication bandwidth is limited by laser-pulse stretching. Improving the communication rate increases the intersymbol interference (ISI). To reduce the effect of ISI, the Viterbi equalization (VE) algorithm is used to estimate the maximum-likelihood receiving sequence. The Monte Carlo method is used to simulate the stretching of the received laser pulse and the maximum communication rate at a wavelength of 532 nm in Jerlov IB and Jerlov II water channels with communication distances of 80, 100, and 130 m, respectively. The high-data rate communication performance for the VE and hard-decision algorithms is compared. The simulation results show that the VE algorithm can be used to reduce the ISI by selecting the minimum error path. The trade-off between the high-data rate communication performance and minor bit-error rate performance loss makes VE a promising option for applications in long-distance, high-speed underwater laser communication systems.
- 1 July 2017
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 56 (7) , 076101
Viterbi equalization for long-distance, high-speed underwater laser communication
In long-distance, high-speed underwater laser communication, because of the strong absorption and scattering processes, the laser pulse is stretched with the increase in communication distance and the decrease in water clarity. The maximum communication bandwidth is limited by laser-pulse stretching. Improving the communication rate increases the intersymbol interference (ISI). To reduce the effect of ISI, the Viterbi equalization (VE) algorithm is used to estimate the maximum-likelihood receiving sequence. The Monte Carlo method is used to simulate the stretching of the received laser pulse and the maximum communication rate at a wavelength of 532 nm in Jerlov IB and Jerlov II water channels with communication distances of 80, 100, and 130 m, respectively. The high-data rate communication performance for the VE and hard-decision algorithms is compared. The simulation results show that the VE algorithm can be used to reduce the ISI by selecting the minimum error path. The trade-off between the high-data rate communication performance and minor bit-error rate performance loss makes VE a promising option for applications in long-distance, high-speed underwater laser communication systems.
- 1 January 2017
- Published by Optica Publishing Group
- p. Su2A.20
The Down-link Propagation Modeling for Underwater Laser Communication
A down-link propagation model was set based on Monte Carlo simulation, and the comprehensive influence of sea wave, water channel and receiver system has been considered. The down-link propagation model has been validated by practical received results.
- 1 January 2017
- Published by Optica Publishing Group
- p. Su2A.20
The Down-link Propagation Modeling for Underwater Laser Communication
A down-link propagation model was set based on Monte Carlo simulation, and the comprehensive influence of sea wave, water channel and receiver system has been considered. The down-link propagation model has been validated by practical received results.