Augusto Antonio Gomez-Capera
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Augusto Antonio Gomez-Capera has a total of 91 co-authors. Here are the top co-authors by number of shared publications:
- Andrea Rovida
Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Milano, Italy
8 shared publications - Mario Locati
Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Milano, Via Alfonso Corti 12, 20133 Milano, Italy
5 shared publications - Andrea Antonucci
Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Milano, Italy
4 shared publications - Giovanni Lanzano
Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Milano, Italy
4 shared publications - Carlo Meletti
Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Pisa, Pisa 56125, Italy
3 shared publications - Carlos Alberto Vargas
Universidad Nacional de Colombia
3 shared publications
Latest Publications
- Open Access
- 1 May 2026
- Published by Sociedad Geologica Mexicana in Boletín de la Sociedad Geológica Mexicana
- Vol. 2 (78)
Macroseismic and seismotectonic analysis of the Mw 6.1 August 17, 2023 earthquake in the central region of Colombia
This study conducts a complementary analysis of instrumental and macroseismic data regarding the August 17, 2023, earthquake in the central region of Colombia. This event is part of a historical earthquake sequence in the region, with an intensity higher than VII EMS‑98, which has caused considerable material damage in the area. This earthquake had a magnitude of 6.1 Mw. The application of the attenuation model calibrated in magnitude Mw and the BW97 method allows for precise modeling of the location and magnitude from macroseismic data within an acceptable margin of uncertainty for both magnitudes (Mw±0.2) and location (±13 km). Using valid empirical regressions, we determine the parameters of the seismic focus size: horizontal extension L = 9.62 km, vertical extension lz = 15.76 km, rupture area A = 97.3 km2 , and deformed volume V = 1533.45 km3. Within the first five days, at least 90 aftershocks were located by the Red Sismológica Nacional de Colombia (RSNC), supporting the source-area geometry inferred in this study. With these parameters and applying Kostrov’s model to the seismic flow of the rock mass, it was found that the maximum compressional strain rate is ε̇yy=1.22 x 10-6 yr-1, which is produced at an average velocity of 11.7 in the E-W direction.
- 1 May 2026
- Published by Sociedad Geologica Mexicana in Boletín de la Sociedad Geológica Mexicana
- Vol. 2 (78)
Open AccessMacroseismic and seismotectonic analysis of the Mw 6.1 August 17, 2023 earthquake in the central region of Colombia
This study conducts a complementary analysis of instrumental and macroseismic data regarding the August 17, 2023, earthquake in the central region of Colombia. This event is part of a historical earthquake sequence in the region, with an intensity higher than VII EMS‑98, which has caused considerable material damage in the area. This earthquake had a magnitude of 6.1 Mw. The application of the attenuation model calibrated in magnitude Mw and the BW97 method allows for precise modeling of the location and magnitude from macroseismic data within an acceptable margin of uncertainty for both magnitudes (Mw±0.2) and location (±13 km). Using valid empirical regressions, we determine the parameters of the seismic focus size: horizontal extension L = 9.62 km, vertical extension lz = 15.76 km, rupture area A = 97.3 km2 , and deformed volume V = 1533.45 km3. Within the first five days, at least 90 aftershocks were located by the Red Sismológica Nacional de Colombia (RSNC), supporting the source-area geometry inferred in this study. With these parameters and applying Kostrov’s model to the seismic flow of the rock mass, it was found that the maximum compressional strain rate is ε̇yy=1.22 x 10-6 yr-1, which is produced at an average velocity of 11.7 in the E-W direction.
- Open Access
- 7 January 2025
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 23 (2) , 831
Correction To: Evaluating the performance of intensity prediction equations for the Italian area
- 7 January 2025
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 23 (2) , 831
Open AccessCorrection To: Evaluating the performance of intensity prediction equations for the Italian area
- Open Access
- 21 November 2024
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 23 (2) , 807-829
Evaluating the performance of intensity prediction equations for the Italian area
In this study, we evaluate the performance of five recent Intensity Prediction Equations (IPEs) valid for Italy comparing their predictions with intensities documented at Italian localities. We build four different testing datasets using the data contained in the most recent versions of the Italian Parametric Earthquake Catalogue CPTI15 and Macroseismic Database DBMI15 and we estimate the residuals between observed and predicted intensity values for all the selected IPEs. The results are then analyzed using a measure-oriented approach to score each model according to the goodness of model prediction and a diagnostic-oriented approach to investigate the trend of the residuals as a function of the different variables. The results indicate the capability of all the tested IPEs to reproduce the average decay of macroseismic intensity in Italy although with a general underestimation of high-intensity values. In addition, an in-depth investigation of the spatial and temporal patterns of the event residual term, computed using the best predictive model, is carried out. Lastly, we provide some hints for the selection of calibration datasets for the development of future intensity attenuation models.
- 21 November 2024
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 23 (2) , 807-829
Open AccessEvaluating the performance of intensity prediction equations for the Italian area
In this study, we evaluate the performance of five recent Intensity Prediction Equations (IPEs) valid for Italy comparing their predictions with intensities documented at Italian localities. We build four different testing datasets using the data contained in the most recent versions of the Italian Parametric Earthquake Catalogue CPTI15 and Macroseismic Database DBMI15 and we estimate the residuals between observed and predicted intensity values for all the selected IPEs. The results are then analyzed using a measure-oriented approach to score each model according to the goodness of model prediction and a diagnostic-oriented approach to investigate the trend of the residuals as a function of the different variables. The results indicate the capability of all the tested IPEs to reproduce the average decay of macroseismic intensity in Italy although with a general underestimation of high-intensity values. In addition, an in-depth investigation of the spatial and temporal patterns of the event residual term, computed using the best predictive model, is carried out. Lastly, we provide some hints for the selection of calibration datasets for the development of future intensity attenuation models.
- 18 November 2024
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 96 (3) , 2092-2094
Erratum to Studying Past Earthquakes with Modern Techniques: Ground-Motion Simulations for the 11 January 1693 Noto Earthquake in Italy
- 18 November 2024
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 96 (3) , 2092-2094
Erratum to Studying Past Earthquakes with Modern Techniques: Ground-Motion Simulations for the 11 January 1693 Noto Earthquake in Italy
- 13 September 2024
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 95 (6) , 3387-3405
Studying Past Earthquakes with Modern Techniques: Ground-Motion Simulations for the 11 January 1693 Noto Earthquake in Italy
The 1693 Noto earthquake, which struck on 11 January, is one of the Italy’s largest and most devastating earthquakes. According to the Italian Parametric Earthquake Catalogue, it reached a maximum intensity of 11 on the Mercalli–Cancani–Sieberg scale and had an estimated magnitude of M 7.3. Nevertheless, its precise location and source definition remain subjects to debate due to the complexity of the seismic sequence and lack of geological evidence. A series of potential seismic sources differing in location, dimension, and kinematics have been proposed in the literature based on seismotectonic data and interpretations. The goal of this work is to perform a retrospective experiment to verify which of the proposed seismic sources have a better fit with the observed intensity data. To do so, novel simulation techniques are used to study this historical earthquake. We generated ground-motion scenarios for each proposed source model through a stochastic finite-fault simulation approach. Then, the simulated ground-motion parameters were converted to intensities using two different ground-motion intensity conversion equations for Italy. Finally, we compared these converted intensities with the observed intensity data in terms of normalized root mean square errors and converted intensities from ground-motion models. Our results generally show good consistency between converted intensities from the simulated and predicted ground motions, whereas the observed intensities fit better to converted ones from the peak ground velocity rather than peak ground acceleration. Our analysis reveals that the source model reproducing the best of the macroseismic data of the Noto earthquake is the Canicattì–Villasmundo fault system with a magnitude of 7.1.
- 13 September 2024
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 95 (6) , 3387-3405
Studying Past Earthquakes with Modern Techniques: Ground-Motion Simulations for the 11 January 1693 Noto Earthquake in Italy
The 1693 Noto earthquake, which struck on 11 January, is one of the Italy’s largest and most devastating earthquakes. According to the Italian Parametric Earthquake Catalogue, it reached a maximum intensity of 11 on the Mercalli–Cancani–Sieberg scale and had an estimated magnitude of M 7.3. Nevertheless, its precise location and source definition remain subjects to debate due to the complexity of the seismic sequence and lack of geological evidence. A series of potential seismic sources differing in location, dimension, and kinematics have been proposed in the literature based on seismotectonic data and interpretations. The goal of this work is to perform a retrospective experiment to verify which of the proposed seismic sources have a better fit with the observed intensity data. To do so, novel simulation techniques are used to study this historical earthquake. We generated ground-motion scenarios for each proposed source model through a stochastic finite-fault simulation approach. Then, the simulated ground-motion parameters were converted to intensities using two different ground-motion intensity conversion equations for Italy. Finally, we compared these converted intensities with the observed intensity data in terms of normalized root mean square errors and converted intensities from ground-motion models. Our results generally show good consistency between converted intensities from the simulated and predicted ground motions, whereas the observed intensities fit better to converted ones from the peak ground velocity rather than peak ground acceleration. Our analysis reveals that the source model reproducing the best of the macroseismic data of the Noto earthquake is the Canicattì–Villasmundo fault system with a magnitude of 7.1.
- Open Access
- 29 November 2023
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 22 (3) , 795-843
Macroseismic intensity attenuation models calibrated in Mw for Italy
This study aims at developing new macroseismic intensity attenuation models valid for Italy by exploiting the most updated macroseismic dataset and earthquakes catalogue, as well as the information obtained from a critical analysis of the most recent models in the literature. Several different attenuation models have been calibrated as a function of the moment magnitude (Mw) and epicentral distance from 16,260 intensity data points, that are related to 119 earthquakes occurred after 1900. According to trends and residuals analysis, the preferred calibrated intensity attenuation function is a Log-Linear model for epicentral distance (Repiin km) and a linear model forMwas: $$I\left( {MCS} \right) = {1}.{81} - {2}.{61}LogR - 0.00{39}R + {1}.{42}Mw$$ with pseudo hypocentral distance $$R = \sqrt {R_{epi}^{2} + \left( {9.87} \right)^{2} }$$ ; the estimated standard deviation isσ = 0.75. Also noteworthy is another model for macroseismic intensity attenuation that proved to be as good as the best model and shows higher sensitivity to physical parameters, such as focal depth and magnitude, especially in the epicentral area. Performance of all calibrated models was also checked on an independent set of 15 post-1900 Italian earthquakes. One of the results of the present work is the opportunity to define earthquake scenarios (e.g. probabilistic seismic hazard maps) in terms of Macroseismic Intensity and its related standard deviation, avoiding the uncertainties due to the conversion of various ground shaking parameters into intensity values.- 29 November 2023
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 22 (3) , 795-843
Open AccessMacroseismic intensity attenuation models calibrated in Mw for Italy
This study aims at developing new macroseismic intensity attenuation models valid for Italy by exploiting the most updated macroseismic dataset and earthquakes catalogue, as well as the information obtained from a critical analysis of the most recent models in the literature. Several different attenuation models have been calibrated as a function of the moment magnitude (Mw) and epicentral distance from 16,260 intensity data points, that are related to 119 earthquakes occurred after 1900. According to trends and residuals analysis, the preferred calibrated intensity attenuation function is a Log-Linear model for epicentral distance (Repiin km) and a linear model forMwas: $$I\left( {MCS} \right) = {1}.{81} - {2}.{61}LogR - 0.00{39}R + {1}.{42}Mw$$ with pseudo hypocentral distance $$R = \sqrt {R_{epi}^{2} + \left( {9.87} \right)^{2} }$$ ; the estimated standard deviation isσ = 0.75. Also noteworthy is another model for macroseismic intensity attenuation that proved to be as good as the best model and shows higher sensitivity to physical parameters, such as focal depth and magnitude, especially in the epicentral area. Performance of all calibrated models was also checked on an independent set of 15 post-1900 Italian earthquakes. One of the results of the present work is the opportunity to define earthquake scenarios (e.g. probabilistic seismic hazard maps) in terms of Macroseismic Intensity and its related standard deviation, avoiding the uncertainties due to the conversion of various ground shaking parameters into intensity values. - Open Access
- 2 May 2023
- Published by Springer Nature in Research Square
Macroseismic intensity attenuation models calibrated in Mw for Italy
This study aims at developing new macroseismic intensity attenuation models valid for Italy by exploiting the most updated macroseismic dataset and earthquakes catalogue, as well as the information obtained from a critical analysis of the most recent models in the literature. Several different attenuation models have been calibrated as a function of the moment magnitude (Mw) and epicentral distance from 16.260 intensity data points, that are related to 119 earthquakes occurred after 1900. According to trends and residuals analysis, the preferred calibrated intensity (I) attenuation function is a Log-Linear model for epicentral distance (r in km) and a linear model for Mw as: I = 1.81 - 2.61 LogR - 0.0039R + 1.42Mw with R=(r2+(9.87)2)0.5; the estimated standard deviation is σ=0.75. Also noteworthy is an unusual multiplicative model for macroseismic intensity attenuation which performs as well as the best model and shows higher sensitivity to physical parameters, such as focal depth and magnitude, especially in the epicentral area. Performance of all calibrated models was also checked on an independent set of 15 post-1900 Italian earthquakes.
- 2 May 2023
- Published by Springer Nature in Research Square
Open AccessMacroseismic intensity attenuation models calibrated in Mw for Italy
This study aims at developing new macroseismic intensity attenuation models valid for Italy by exploiting the most updated macroseismic dataset and earthquakes catalogue, as well as the information obtained from a critical analysis of the most recent models in the literature. Several different attenuation models have been calibrated as a function of the moment magnitude (Mw) and epicentral distance from 16.260 intensity data points, that are related to 119 earthquakes occurred after 1900. According to trends and residuals analysis, the preferred calibrated intensity (I) attenuation function is a Log-Linear model for epicentral distance (r in km) and a linear model for Mw as: I = 1.81 - 2.61 LogR - 0.0039R + 1.42Mw with R=(r2+(9.87)2)0.5; the estimated standard deviation is σ=0.75. Also noteworthy is an unusual multiplicative model for macroseismic intensity attenuation which performs as well as the best model and shows higher sensitivity to physical parameters, such as focal depth and magnitude, especially in the epicentral area. Performance of all calibrated models was also checked on an independent set of 15 post-1900 Italian earthquakes.
- Open Access
- 22 February 2023
- Published by McGill University Library and Archives in Seismica
- Vol. 2 (3)
About the “predecessors” of the 2023 February earthquakes, Turkey
In the frame of a comprehensive investigation of historical earthquakes of Anatolia, we propose a re-appraisal of four major earthquakes/sequences occurred after 1000 AD (1114/1115, 1269, 1513/1514 and 1544), which could be considered as predecessors of the earthquakes of February 6, 2023. The main purpose is to provide reliable parameter values for the investigated earthquakes. Our investigation consisted of: retrieving and analysing the main primary historical sources; identifying the localities mentioned and assessing macroseismic intensity; determining earthquake parameters (location, magnitude and – where possible – the source azimuth) with the repeatable and transparent “Boxer” method, after properly calibrating the relevant coefficient by considering recent earthquakes of the Anatolian region. Our investigations show that the 1114 earthquake can be considered as a predecessor of the main 2023 earthquake, although the latter ruptured a larger area; the earthquake of 1544 may be a predecessor of the second event of 2023, February; and that the background of the 1513/1514 earthquake is so poor that a lot of care is required while handling the currently available parameters. In conclusion, we also compare our results with the findings of paleoseismological investigation and discuss how they contribute to understanding the rupture history of the East Anatolian Fault.
- 22 February 2023
- Published by McGill University Library and Archives in Seismica
- Vol. 2 (3)
Open AccessAbout the “predecessors” of the 2023 February earthquakes, Turkey
In the frame of a comprehensive investigation of historical earthquakes of Anatolia, we propose a re-appraisal of four major earthquakes/sequences occurred after 1000 AD (1114/1115, 1269, 1513/1514 and 1544), which could be considered as predecessors of the earthquakes of February 6, 2023. The main purpose is to provide reliable parameter values for the investigated earthquakes. Our investigation consisted of: retrieving and analysing the main primary historical sources; identifying the localities mentioned and assessing macroseismic intensity; determining earthquake parameters (location, magnitude and – where possible – the source azimuth) with the repeatable and transparent “Boxer” method, after properly calibrating the relevant coefficient by considering recent earthquakes of the Anatolian region. Our investigations show that the 1114 earthquake can be considered as a predecessor of the main 2023 earthquake, although the latter ruptured a larger area; the earthquake of 1544 may be a predecessor of the second event of 2023, February; and that the background of the 1513/1514 earthquake is so poor that a lot of care is required while handling the currently available parameters. In conclusion, we also compare our results with the findings of paleoseismological investigation and discuss how they contribute to understanding the rupture history of the East Anatolian Fault.
- Open Access
- 23 August 2022
- Published by Springer Nature in Mediterranean Geoscience Reviews
- Vol. 4 (4) , 555-568
Exploiting the legacy of N.N. Ambraseys: known and unknown earthquakes in the Anatolian area
N.N. Ambraseys left us a wealth of papers and volumes on a number of topics; many of them concern the historical earthquake investigation. One of the last works is the 2009 volume (Ambraseys in Earthquakes in the Eastern Mediterranean and the Middle East: a multidisciplinary study of 2000 years of seismicity, Cambridge, Cambridge, UK, 2009), where he summarizes the results of more than thirty years of investigation through archives and libraries, covering earthquakes of a large area, from Albania to Caucasus. For each earthquake, a short summary of the main effects is supplied, together with the list of the sources used. Such information is intended as material for assessing location and size of the earthquakes, task that the author accomplished only in a very preliminary way for a few earthquakes, only. In addition to exhaustive descriptions of the most known earthquakes and the relevant historical sources, the volume contains information on a large number of earthquakes, so far unknown to the current earthquake catalogues. This paper intends to represent a homage to his immense work, partially showing the potential of his volume. We briefly present here some case histories, including the preliminary location and size of the earthquakes – known and unknown—around Anatolia. We add some examples of how he was able to prove that some alleged earthquakes are actually to be considered as fake or very doubtful. We also present the damage information supplied for some known and unknown earthquakes, and how they can be used for assessing location and size of them.
- 23 August 2022
- Published by Springer Nature in Mediterranean Geoscience Reviews
- Vol. 4 (4) , 555-568
Open AccessExploiting the legacy of N.N. Ambraseys: known and unknown earthquakes in the Anatolian area
N.N. Ambraseys left us a wealth of papers and volumes on a number of topics; many of them concern the historical earthquake investigation. One of the last works is the 2009 volume (Ambraseys in Earthquakes in the Eastern Mediterranean and the Middle East: a multidisciplinary study of 2000 years of seismicity, Cambridge, Cambridge, UK, 2009), where he summarizes the results of more than thirty years of investigation through archives and libraries, covering earthquakes of a large area, from Albania to Caucasus. For each earthquake, a short summary of the main effects is supplied, together with the list of the sources used. Such information is intended as material for assessing location and size of the earthquakes, task that the author accomplished only in a very preliminary way for a few earthquakes, only. In addition to exhaustive descriptions of the most known earthquakes and the relevant historical sources, the volume contains information on a large number of earthquakes, so far unknown to the current earthquake catalogues. This paper intends to represent a homage to his immense work, partially showing the potential of his volume. We briefly present here some case histories, including the preliminary location and size of the earthquakes – known and unknown—around Anatolia. We add some examples of how he was able to prove that some alleged earthquakes are actually to be considered as fake or very doubtful. We also present the damage information supplied for some known and unknown earthquakes, and how they can be used for assessing location and size of them.
- Open Access
- 25 January 2022
- Published by Universidad Industrial de Santander in Boletín de Geología
- Vol. 44 (1) , 111-134
Sismicidad y sismotectónica para el sector norte del ámbito del Sistema de Fallas de Algeciras, Cordillera Oriental, Colombia
Boletín de Geología es una publicación cuatrimestral de circulación internacional dedicada a estudios originales y de alta calidad en el campo de las Geociencias.
- 25 January 2022
- Published by Universidad Industrial de Santander in Boletín de Geología
- Vol. 44 (1) , 111-134
Open AccessSismicidad y sismotectónica para el sector norte del ámbito del Sistema de Fallas de Algeciras, Cordillera Oriental, Colombia
Boletín de Geología es una publicación cuatrimestral de circulación internacional dedicada a estudios originales y de alta calidad en el campo de las Geociencias.