SWSookyun Wang

Sookyun Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sookyun Wang has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical Modeling on Pore‐Scale Dynamics of Immiscible Air–Water Drainage in a Heterogeneous Micromodel

    by Sookyun Wang, Seon-Ok Kim, Minhee Lee

    Immiscible displacement of water by air in a heterogeneous two‐dimensional porous medium was numerically investigated using the phase‐field method coupled with the Navier–Stokes equations. The pore geometry was reconstructed from a Berea sandstone image, and a series of numerical simulations was performed using the COMSOL Multiphysics platform. Simulation results showed that the drainage process unfolded in four distinct stages according to changes in pore‐scale invasion behavior, air saturation, and capillary pressure. Air mainly invaded through larger and better connected pores, showing that the displacement process was strongly affected by viscous fingering under the given flow conditions ( C a = 8.47 × 10 −4 ; M = 0.018). After the first breakthrough, the invasion rate became lower because the flow was concentrated along the main preferential pathway. Later, another rapid invasion occurred when pressure increased behind a narrow constriction and allowed air to enter a previously unswept upper region, which led to the second breakthrough. Residual water remained in dead‐end pores and in regions surrounded by narrow throats. Variation in injection pressure showed different connectivity regimes, including no breakthrough, single‐pathway breakthrough, and dual‐pathway breakthrough. However, once the dual‐breakthrough condition was reached, further increase in injection pressure gave only a small increase in the final air saturation. In addition, increasing the contact angle from strongly water‐wet to near‐neutral wetting reduced the time interval between the two breakthroughs, increased the equilibrium air saturation, and decreased the macroscopic capillary pressure. These results indicate that injection pressure and wettability together strongly influence breakthrough behavior, flow connectivity, and residual trapping, and that sequential capillary entry conditions play an important role in the transition between different displacement regimes in heterogeneous porous media.

  • Open Access

    Image-based Estimation of Saturation During Air-water Immiscible Displacement in Pore Structures Using Deep Learning Techniques

    by Seon-Ok Kim, Jeongseo Lee, Sookyun Wang

    Seon-ok Kim, Jeongseo Lee, Sookyun Wang. Econ. Environ. Geol. 2025;58:561-71. https://doi.org/10.9719/EEG.2025.58.5.561

  • Open Access

    Modeling Immiscible Fluid Flow: Insights into Air Displacement of Water in Microscale Porous Media

    by Sookyun Wang, Minhee Lee, Seon-Ok Kim

    This study presents a comprehensive analysis of immiscible displacement phenomena, focusing on the displacement of water by air in an artificial porous medium. The research combines experimental approaches using transparent micromodels and numerical simulations conducted with COMSOL Multiphysics, offering an in-depth understanding of the physical processes governing immiscible fluid displacement in porous structures. At the core of the study is the experimental observation of air injection into a water-saturated artificial porous medium. These experiments were meticulously designed to mirror realistic subsurface conditions and provided a clear visual insight into the immiscible displacement process. The transparent micromodels employed in these experiments were instrumental in visualizing the interaction between air and water phases, capturing the intricate development of preferential pathways as air displaces water within the medium. Complementing the experimental observations, numerical analyses using COMSOL Multiphysics provided a theoretical framework to validate and expand upon the experimental results. These simulations were crucial in quantifying the dynamics of immiscible displacement under varied conditions, offering a detailed perspective on the interplay between air and water phases within the porous medium. The synergy between experimental and numerical approaches allowed for a holistic understanding of the displacement mechanics, ensuring both visual and quantitative insights. A significant aspect of this research was investigating the impact of injection pressure and wettability on the displacement process. Both parameters are known to critically influence the behavior of immiscible fluids in porous media. The study meticulously compared the effects of varying these parameters in both experimental and numerical settings. This comparison offered valuable insights into how changes in injection pressure and surface wettability affect the formation and evolution of preferential pathways, as well as the overall efficiency of the displacement process. One of the key findings of this study is the remarkable similarity in displacement patterns observed in both experimental micromodels and numerical simulations. This consistency not only validates the numerical model used but also underscores the reliability of the experimental approach in replicating real-world conditions. The observed displacement patterns shed light on the complex dynamics governing immiscible fluid flow in porous media, highlighting the interplay of factors such as capillary forces, fluid viscosity, and medium heterogeneity.

  • Open Access

    Behavior of Heavy Metals Studies on the Hydrothermal Alteration Characteristics of Bentonite; Use as Medicinal Mineral

    by Seon-Ok Kim, Sookyun Wang

    Seon-ok Kim, Sookyun Wang. Econ. Environ. Geol. 2023;56:229-38. https://doi.org/10.9719/EEG.2023.56.3.229


  • Open Access

    The effects of fluid characteristics in immiscible two-phase flow on migration and residual phenomena in heterogeneous pore networks

    by Sookyun Wang, Minhee Lee, Seon-Ok Kim

    Geological CO2 sequestration (GCS) is one of the most promising technologies for mitigating greenhouse-gas emission into the atmosphere. In GCS operations, residual trapping is the most favorable form of trapping mechanism because of its storage security and capacity. This novel storage option for CO2 involves injecting supercritical CO2 (scCO2) into porous formations saturated with pore fluid such as brine and initiate CO2 flooding with immiscible displacement. Despite of significant effects on macroscopic migration and distribution of injected CO2, however, only a limited information is available on the effects of immiscible two-phase flow on dynamic phenomena in microscopic scCO2-brine-glass pore systems. In this study, the effects of hydrodynamic characteristics of two immiscible fluids - carbon dioxide in supercritical phase and porewater - and their interfaces on their migration and distribution patterns in heterogeneous pore networks are investigated. For the purpose, a series of injection experiments were performed using 2D transparent micromodels. The immiscible two-phase flow with displacement and residual phenomena during drainage processes in heterogeneous pore networks were visually observed using a high-resolution microscope and a camera, and the temporal and spatial changes in distribution and saturation of the two immiscible fluids were quantitatively estimated at the pore-scale using image processing. To compare with experimental results and to analyze the phenomena quantitatively, a series of numerical simulations are also carried out. A 2D phase field model is established in the COMSOL Multiphysics platform and is applied to simulate the two-phase flow and immiscible displacement phenomena during drainage processes in pore networks with varying major model parameters such as injection mass flow rates, contact angles, viscosity ratios etc. The experimental observations are used to validate the accuracy of the numerical model. The results from experimental observations and numerical simulations are in good agreement in migration and distribution patterns and can provide important fundamental information on hydrodynamic characteristics of immiscible two-phase flow at pore-scale in porous networks for geological CO2 sequestration.

  • Open Access

    Stabilization of As and Heavy Metal-Contaminated Soils by Two Mine Drainage-Treated Sludges

    by Hyunji Tak, Seonhee Kim, Kyeongtae Kim, Sookyun Wang, Minhee Lee

    This study explored and analyzed the potential of the practical use of acid mine drainage-treated sludge (AMDS) as a new soil stabilizer for arsenic (As) and heavy metals. Various analyses, toxicity evaluations, and extraction batch experiments were performed to investigate the characteristics of the AMDS as a soil stabilizer and to identify the main mechanisms to fix As and heavy metals on the AMDS in soil. Two types of AMDS, copper metal mine drainage-treated sludge (MMDS) and coal mine drainage-treated sludge (CMDS) and four contaminated soils with different pollution scenarios were used in the experiments. ‘Soil A’ and ‘Soil D’ were mainly contaminated with Cd, Pb and Zn. ‘Soil B’ and ‘Soil C’ were contaminated with As. Results from XRD, XRF, SEM-EDS, TG-DTA, and BET analyses suggested that AMDS is mainly composed of Fe- and Ca- bearing minerals such as CaCO3, Ca(OH)2 and amorphous Fe-oxide (hydroxide), which have a large surface area and high adsorption capacity for As and heavy metals. From batch extraction experiments, the Pb stabilization efficiency of both of the AMDSs in soil A, which has a high Pb and Zn content, was higher than 90%. The high heavy metal stabilization efficiency comes directly from the electrostatic attraction between metal cations and the negatively charged AMDS surface and/or from the co-precipitation of metal oxide (hydroxide) and CaCO3, which occurs comprehensively on the AMDS surface. In the case of Zn, the stabilization efficiency in soil A was somewhat low due to the adsorption competition with Pb, but the Zn stabilization efficiency of the CMDS in soil A was higher than 80% (70% or higher for the MMDS). For soil D, the Zn stabilization efficiency of two AMDSs was higher than 85% because of the lower concentration of other heavy metals in soil D, compared to in soil A. The As stabilization efficiency of the AMDSs in soil contaminated with As (soil B and soil C) was higher than 85%, (mostly > 95%). The overall stabilization efficiency of two AMDSs for heavy metals and As were higher than 75% and 85% (mostly > 90%), respectively, regardless of soil type. We concluded that this high As stabilization efficiency was due to the formation of a new complex by ligand exchange between the Fe- (oxide) hydroxide and the arsenate and also to the cation bridge effect between the AMDS surface and the arsenate as well as the co-precipitation.


  • Open Access

    Migration and Residual Trapping of Immiscible Fluids during Cyclic Injection: Pore-Scale Observation and Quantitative Analysis

    by Haejin Ahn, Seon-Ok Kim, Minhee Lee, Sookyun Wang

    Geological CO2 sequestration (GCS) is one of the most promising technologies for mitigating greenhouse gas emission into the atmosphere. In GCS operations, residual trapping is the most favorable form of a trapping mechanism because of its storage security and capacity. In this study, the effects of cyclic injection of CO2-water on the immiscible displacement and residual trapping in pore networks were examined. For the purpose, a series of injection experiments with five sets of drainage-imbibition cycles were performed using 2D transparent micromodels and a pair of proxy fluids, n-hexane, and deionized water. The multiphase flow and immiscible displacement phenomena during drainage and imbibition processes in pore networks were visually observed, and the temporal and spatial changes in distribution and saturation of the two immiscible fluids were quantitatively estimated at the pore scale using image analysis techniques. The results showed that the mobile region of invading fluids decreased asymptotically as the randomly diverged flow paths gradually converged into less ramified ones over multiple cycles. Such decrease was accompanied by a gradual increase of the immobile region, which consists of tiny blobs and clusters of immiscible fluids. The immobile region expanded as streams previously formed by the insertion of one fluid dispersed into numerous isolated, small-scale blobs as the other fluid was newly injected. These processes repeated until the immobile region approached the main flow channels. The observations and analyses in this study implied that the application of cyclic injection in GCS operations may be used to store large-scale CO2 volume in small-scale dispersed forms, which may significantly improve the effectiveness and security of geological CO2 sequestration.


  • Open Access

    Accelerated Carbonation of Recycled Aggregates Using the Pressurized Supercritical Carbon Dioxide Sparging Process

    by Jinyoung Park, Jinkyun Lee, Chul-Woo Chung, Sookyun Wang, Minhee Lee

    The carbonation of recycled aggregate was accelerated by sparging with supercritical carbon dioxide (scCO2) to reduce the amount of time needed for carbonation, which is necessary for the pH neutralization of recycled aggregate. To accelerate the carbonation process, pressurized scCO2 was sparged into two different types of recycled aggregates immersed in water for 1 h, followed by standstill for 2 h (in total, a 3 h treatment process). The reduction of the pH of the treated aggregates due to carbonation was investigated using batch extraction experiments. A continuous column extraction experiment for the scCO2-sparged recycled aggregate was also performed to identify the effect of pH reduction under the condition of non-equilibrium reaction. From XRD, SEM/EDS, and TG/DTA analyses, much of the portlandite in the recycled aggregates was consumed. In its place, calcite was created as a secondary mineral during only 3 h of treatment (1 h scCO2 sparging and 2 h stationing), indicating satisfactory carbonation of the aggregate. The results of the batch extraction experiments for both of the two recycled aggregate types also showed that the average pH of scCO2-sparged aggregate decreased from 12.0 to 2-sparged aggregate also remained as 2 sparging process is sufficient to carbonate waste concrete aggregate and to create an alternative construction material resource.


  • Open Access

    Estimates of scCO2 Storage and Sealing Capacity of the Janggi Basin in Korea Based on Laboratory Scale Experiments

    by Jinyoung Park, Minjune Yang, Seyoon Kim, Minhee Lee, Sookyun Wang

    Laboratory experiments were performed to measure the supercritical CO2 (scCO2) storage ratio (%) of conglomerate and sandstone in the Janggi Basin, which are classified as rock in Korea that are available for CO2 storage. The scCO2 storage capacity was evaluated by direct measurement of the amount of scCO2 replacing the pore water in each reservoir rock core. The scCO2 sealing capacity of the cap rock (i.e., tuff and mudstone) was also compared by measuring the scCO2 capillary entry pressure (Δp) into the rock core. The measured average scCO2 storage ratio of the conglomerate and the sandstone were 30.7% and 13.1%, respectively, suggesting that the scCO2 storage capacity was greater than 360,000 metric tons. The scCO2 capillary entry pressure for the tuff ranged from 15 to 20 bar and for the mudstone it was higher than 150 bar, suggesting that the mudstone layers had enough sealing capacity from the aspect of hydromechanics. From XRF analyses, before and after 90 d of the scCO2-water-cap rock reaction, the mudstone and the tuff were investigated to assure their geochemical stability as the cap rock. From the study, the Janggi Basin was considered an optimal CO2 storage site based on both its high scCO2 storage ratio and high capillary entry pressure.