PZPuchen Zhu

Puchen Zhu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Puchen Zhu has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Topology Optimization for a Rigid‐Compliant Hybrid Constant Force Gripper

    by Shuhao Xia, Puchen Zhu, Wenkai Lai, Qiye Zhou, Yilun Tong, Xin Ma

    Grippers are essential components in robotic systems, particularly for tasks involving object grasping and manipulation. A constant force gripper provides the advantage of generating a nearly constant output force over a range of input loads without relying on sensors or control, which significantly reduces cost and system complexity. In this article, a topology optimization model is proposed for the design of a constant force gripper, which can simultaneously optimize both rigid links and material distribution. The combination of rigid links and deformable material is expected to reduce the low preload stroke, enabling the gripper to reach the constant force stroke rapidly and thereby improving operational efficiency. To develop the topology optimization model, rigid links and material distribution are represented by state and density variables, respectively, with the constant force behavior as the objective function. To implement a numerically efficient gradient‐based algorithm, the sensitivity of the objective function with respect to the densities of all elements and the states of all links is derived. The experimental result shows the preload stroke of the gripper is 2.2 mm, and the constant force stroke reaches 6.4 mm. The preload stroke of the gripper is reduced by 85.33% compared with the fully compliant constant force gripper.

  • A Dexterity and Exploration Enhanced Quadruped Robot With a Multi-Functional Retractable Variable Stiffness Manipulator

    by Xuchen Wang, Yiying Liang, Shengzhi Wang, Jing Shu, Wenkai Lai, Zhanpeng Huang, Puchen Zhu, Jiajun An, Jianshu Zhou, Xin Ma

    Navigating complex environments—ranging from confined spaces to open areas blocked by obstacles or out of reach of traditional robotic arms—remains a major challenge for conventional robotic systems. These challenges include limited dexterity, adaptability, and accessibility. To address these issues, this article proposed a dexterity and exploration enhanced quadruped robot (DEEQR), which was designed with a quadruped base and a multifunctional retractable variable stiffness manipulator (MRVSM). The MRVSM features a compact active-passive composite continuum mechanism with a 12.8 mm diameter, a high-stiffness telescopic mechanism, and a 2.5 mm diameter working channel that supports interchangeable tools such as a 2-DOF grasper or other miniaturized tools. This design enables precise manipulation and exploration in narrow and obstructed environments. Experiments demonstrated that DEEQR can traverse uneven terrain, navigate confined gaps, and perform complex tasks such as a bomb disposal operation inside a backpack with a 5 cm diameter entrance. The robot also successfully explored and delivered water in blocked spaces beyond the direct reach of the quadruped base. These results highlight DEEQR's strong potential for anti-terrorism applications and search and rescue missions in challenging environments.


  • Design, Optimization, and Experimental Validation of a Handheld Nonconstant-Curvature Hybrid-Structure Robotic Instrument for Maxillary Sinus Surgery

    by Xuchen Wang, Xin Ma, Puchen Zhu, Wee Shen Ng, Huayu Zhang, Xianfeng Xia, Russell H. Taylor, Kwok Wai Samuel Au

    Current robotic flexible medical tools employed in maxillary sinus surgery have shown certain limitations in dexterity and stiffness, resulting in large surgical incisions and potential unintended damage to patients. This article presents a novel four-degree-of-freedom handheld nonconstant-curvature hybrid-structure robotic instrument (HNHRI), which is 3.5 mm in diameter and has significant improvement in both dexterity and stiffness. To enhance dexterity and stiffness, a hybrid-structure instrument with multiple layers and nonconstant curvatures is proposed. A compact and lightweight actuation system is designed to fulfill the requirements of handheld surgical device. A flexible section curvature optimization framework is introduced to enhance reachability and dexterity. Through bench-top experiments and simulation surgery, its performance is validated. The flexible section curvature optimization framework increases the reachability to target region to 100% and achieves an average dexterity index of 48% within the maxillary sinus. Compared to current robotic flexible instruments, bending and torsional stiffness are improved by 197% and 150%, respectively. Utilizing the HNHRI in maxillary sinus surgery offers notable enhancement in both dexterity and stiffness, which has the potential to substantially improve the efficacy and safety of the procedures. These advancements might reduce surgical incisions and minimize surgery-related damage, thereby improving the clinical outcomes for patients.


  • A Minimal Set of Parameters-Based Depth-Dependent Distortion Model and Its Calibration Method for Stereo Vision Systems

    by Xin Ma, Puchen Zhu, Xiao Li, Xiaoyin Zheng, Jianshu Zhou, Xuchen Wang, Kwok Wai Samuel Au

    Depth position highly affects lens distortion, especially in close-range photography, which limits the measurement accuracy of existing stereo vision systems. Moreover, traditional depth-dependent distortion models and their calibration methods have remained complicated. In this work, we propose a minimal set of parameters based depth-dependent distortion model (MDM), which considers the radial and decentering distortions of the lens to improve the accuracy of stereo vision systems and simplify their calibration process. In addition, we present an easy and flexible calibration method for the MDM of stereo vision systems with a commonly used planar pattern, which requires cameras to observe the planar pattern in different orientations. The proposed technique is easy to use and flexible compared with classical calibration techniques for depth-dependent distortion models in which the lens must be perpendicular to the planar pattern. The experimental validation of the MDM and its calibration method showed that the MDM improved the calibration accuracy by 56.55% and 74.15% compared with the Li’s distortion model and traditional Brown’s distortion model. Besides, an iteration-based reconstruction method is proposed to iteratively estimate the depth information in the MDM during three-dimensional reconstruction. The results showed that the accuracy of the iteration-based reconstruction method was improved by 9.08% compared with that of the non-iteration reconstruction method.


  • Data-Driven Remote Center of Cyclic Motion (RC$^{2}$M) Control for Redundant Robots With Rod-Shaped End-Effector

    by Mei Liu, Kun Liu, Puchen Zhu, Guoqian Zhang, Xin Ma, Mingsheng Shang

    Remote center of motion (RCM) has become a rising research direction in the field of robotics. It means that a robot with a rod-shaped end-effector operates through a tiny hole on the surface. Thereinto, a key issue is the deviation of the RCM point's position, apart from the operating accuracy. In addition, considering that an RCM robotic system generally consists of a commercial robot and a specialized rod-shaped end-effector, there exist some errors in the structural information related to the attached end-effector. In this article, a remote center of cyclic motion scheme with a data-driven technology is proposed to control robots, of which end-effectors' structural parameters are inaccurate. Meanwhile, a recurrent neural network is proposed to figure out the scheme's solution, with the relevant theoretical analysis given. Furthermore, simulative and physical experiments on a FRANKA Panda robot with a rod-shaped end-effector are conducted to validate the control scheme's effectiveness distinctly.


  • Design and Experimental Validation of a Novel Hybrid Continuum Robot With Enhanced Dexterity and Manipulability in Confined Space

    by Xin Ma, Xuchen Wang, Zihao Zhang, Puchen Zhu, Shing Shin Cheng, Kwok Wai Samuel Au

    Existing continuum robots still lack the necessary dexterity and manipulability to inspect and operate in confined space with multiple obstacles. In this article, we propose a novel hybrid continuum robot (HCR) with enhanced dexterity and manipulability. The proposed nine-degree-of-freedom robot can fit in confined space with multiple obstacles by changing the length of its inner hybrid-structure section and outer flexible section. A rotatable inner hybrid-structure section and an additional distal wrist enable rotation motion and sharp bending at the distal end of the HCR, which enhances its dexterity and manipulability. Besides, we develop a detachable, lightweight (2.5 kg), and compact (41 cm×15 cm×6 cm) actuation system for the HCR. It can be easily integrated with existing commercial robot arms to adjust the pose of the HCR's base, which further enlarges its workspace. In order to demonstrate the HCR's obstacle avoidance capability in confined space, a path-planning method is proposed. Simulation results show the dexterity and manipulability of the HCR enhanced by 98% and 3804 times compared with an existing concentric flexible robot in a confined space with one obstacle. Experiments validate the feasibility of the HCR and its path-planning method.


  • Open Access

    Adaptive Backstepping Sliding Mode Control of Trajectory Tracking for Robotic Manipulators

    by Zhu Dachang, Du Baolin, Zhu Puchen, Wenqiang Wu

    To achieve precise trajectory tracking of robotic manipulators in complex environment, the precise dynamic model, parameters identification, nonlinear characteristics, and disturbances are the factors that should be solved. Although parameters identification and adaptive estimate method were proposed for robotic control in many literature studies, the essential factors, such as coupling and friction, are rarely mentioned as it is difficult to build the precise dynamic model of the robotic manipulator. An adaptive backstepping sliding mode control is proposed to solve the precise trajectory tracking under external disturbances with complex environment, and the dynamic response characteristics of a two-link robotic manipulator are described in this paper. First, the Lagrange kinetic method is used to derive the precise dynamic model which includes the nonlinear factor with friction and coupling. Moreover, the dynamic model of two-link robotic manipulator is built. Second, the estimate function for the nonlinear part is selected, and backstepping algorithm is used for analyzing the stabilities of the sliding mode controller by using Lyapunov theory. Furthermore, the convergence of the proposed controller is verified subject to the external disturbance. At last, numerical simulation results are reported to demonstrate the effectiveness of the proposed method.


  • Open Access

    Constant Force PID Control for Robotic Manipulator Based on Fuzzy Neural Network Algorithm

    by Zhu Dachang, Du Baolin, Zhu Puchen, Chen Shouyan

    The increased demand for robotic manipulator has driven the development of industrial manufacturing. In particular, the trajectory tracking and contact constant force control of the robotic manipulator for the working environment under contact condition has become popular because of its high precision and quality operation. However, the two factors are opposite, that is to say, to maintain constant force control, it is necessary to make limited adjustment to the trajectory. It is difficult for the traditional PID controller because of the complexity parameters and nonlinear characteristics. In order to overcome this issue, a PID controller based on fuzzy neural network algorithm is developed in this paper for tracking the trajectory and contact constant force simultaneously. Firstly, the kinetic and potential energy is calculated, and the Lagrange function is constructed for a two-link robotic manipulator. Furthermore, a precise dynamic model is built for analyzing. Secondly, fuzzy neural network algorithm is proposed, and two kinds of turning parameters are derived for trajectory tracking and contact constant force control. Finally, numerical simulation results are reported to demonstrate the effectiveness of the proposed method.