Daniel Besnea
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel Besnea has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
E Moraru
Politehnica University of Bucharest, Department of Mechatronics and Precision Mechanics, Splaiul Independentei Street No.313, Romania
5 shared publicationsC Rizescu
Politehnica University of Bucharest, Splaiul Independentei Street No.313, Romania
4 shared publications- Ciprian Ion Rizescu
National Science and Technology University POLITEHNICA Bucharest
4 shared publications - Dana Rizescu
University Politehnica of Bucharest
4 shared publications Edgar Moraru
University Politehnica of Bucharest, Department of Mechatronics and Precision Mechanics, Splaiul Independentei Street No. 313, Romania
4 shared publicationsElena Dinu
University Politehnica of Bucharest
4 shared publications
Latest Publications
- 28 September 2026
- Published by Editura Academiei Române in Romanian Journal of Information Science and Technology
- Vol. 29 (4) , 313-324
Design and Development of 3D-Printed Models for Limb Joint Motion Simulation
This paper details the design, fabrication, and evaluation of three innovative mechatronic systems for simulating lower limb joint motion, with a focus on the hip, knee, and ankle, using 3D printing and advanced control techniques. Fabricated using CATIA V5 designs and Fused Deposition Modelling (FDM) technology, the models incorporate distinct actuation strategies: a rack-and-pinion mechanism, a streamlined planetary gear system, and an anatomically inspired pulley-cable system. In addition, comprehensive modelling and simulation of an exoskeleton mechanism were performed to establish critical functional parameters. Electronic control is realized via ATmega328p microcontroller coupled with DRV8825 drivers. The proposed electronic system offers improved reliability, customization and minimizes the wiring required in the mechatronic structure. The integration of simulation results, rigorous mechanical design, and precise electronic control demonstrates significant potential for applications in rehabilitation, training, and biomechanical research.
- 28 September 2026
- Published by Editura Academiei Române in Romanian Journal of Information Science and Technology
- Vol. 29 (4) , 313-324
Design and Development of 3D-Printed Models for Limb Joint Motion Simulation
This paper details the design, fabrication, and evaluation of three innovative mechatronic systems for simulating lower limb joint motion, with a focus on the hip, knee, and ankle, using 3D printing and advanced control techniques. Fabricated using CATIA V5 designs and Fused Deposition Modelling (FDM) technology, the models incorporate distinct actuation strategies: a rack-and-pinion mechanism, a streamlined planetary gear system, and an anatomically inspired pulley-cable system. In addition, comprehensive modelling and simulation of an exoskeleton mechanism were performed to establish critical functional parameters. Electronic control is realized via ATmega328p microcontroller coupled with DRV8825 drivers. The proposed electronic system offers improved reliability, customization and minimizes the wiring required in the mechatronic structure. The integration of simulation results, rigorous mechanical design, and precise electronic control demonstrates significant potential for applications in rehabilitation, training, and biomechanical research.
- Open Access
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 997 (1) , 012036
Constructive and functional particularities of 3D printers with applications in the food industry
The paper presents the construction and operation of a 3D printer that uses the principle of food raw material extrusion with possible applications in the food industry. The emergence of these additive technologies has led to the obtaining of complex customized three-dimensional products starting from a 3D CAD model. Among the advantages of this technology with applications in the food industry can be listed: obtaining personalized food products with innovative forms especially in the confectionery and pastry area; obtaining food products that have in the component known raw materials (allergies, intolerance), forms, colour, strictly controlled nutritional value; the possibility of integrating this technology in long-term space missions by creating foods of different shapes and compositions. Also, older people can be helped to deal with the problems of chewing and swallowing. The disadvantages of 3D printing technology with applications in the food industry are related to food safety, because strict hygiene conditions and working temperature control must be ensured. Also, the future development of this technology can lead to the saving of large quantities of food raw materials.
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 997 (1) , 012036
Open AccessConstructive and functional particularities of 3D printers with applications in the food industry
The paper presents the construction and operation of a 3D printer that uses the principle of food raw material extrusion with possible applications in the food industry. The emergence of these additive technologies has led to the obtaining of complex customized three-dimensional products starting from a 3D CAD model. Among the advantages of this technology with applications in the food industry can be listed: obtaining personalized food products with innovative forms especially in the confectionery and pastry area; obtaining food products that have in the component known raw materials (allergies, intolerance), forms, colour, strictly controlled nutritional value; the possibility of integrating this technology in long-term space missions by creating foods of different shapes and compositions. Also, older people can be helped to deal with the problems of chewing and swallowing. The disadvantages of 3D printing technology with applications in the food industry are related to food safety, because strict hygiene conditions and working temperature control must be ensured. Also, the future development of this technology can lead to the saving of large quantities of food raw materials.
- Open Access
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 997 (1) , 012037
Experimental stand for studying the stretch behaviour of woven plastic nets used in the food industry
Mesh bags are the most modern way of packing, storing and transport used for packing vegetables and a variety of fruits. Mesh bags provide freshness, mechanical ventilation and offers a clear image of the content. Determination of elongation is one of the tests by which the nets used in the food industry must be done before their distribution. The mesh bags are made from recyclable materials, available in different colours and can be inserted into foil strips that provide ample space for images and product information. The products being analysed are polyethylene woven nets for packing vegetables (potatoes, onions, peppers, cabbage, carrots, cucumbers, etc.), fruits (apples, pears, oranges, lemons, nuts, etc.) in a diversified dimensional and coloristic form representing the cheapest and most accessible method of packaging. The authors had concerns in the field developing a series of stands with applications in the food industry.
- 1 December 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 997 (1) , 012037
Open AccessExperimental stand for studying the stretch behaviour of woven plastic nets used in the food industry
Mesh bags are the most modern way of packing, storing and transport used for packing vegetables and a variety of fruits. Mesh bags provide freshness, mechanical ventilation and offers a clear image of the content. Determination of elongation is one of the tests by which the nets used in the food industry must be done before their distribution. The mesh bags are made from recyclable materials, available in different colours and can be inserted into foil strips that provide ample space for images and product information. The products being analysed are polyethylene woven nets for packing vegetables (potatoes, onions, peppers, cabbage, carrots, cucumbers, etc.), fruits (apples, pears, oranges, lemons, nuts, etc.) in a diversified dimensional and coloristic form representing the cheapest and most accessible method of packaging. The authors had concerns in the field developing a series of stands with applications in the food industry.
- 18 July 2020
- Published by Springer Nature
- p. 139-148
Device for Injection Molding Realized by Additive Technologies
- 18 July 2020
- Published by Springer Nature
- p. 139-148
Device for Injection Molding Realized by Additive Technologies
- Open Access
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 564 (1) , 012029
Theoretical and numerical researches on the electrochemical polishing of dental prostheses realized by selective laser melting
The paper presents and describes an electrochemical finishing process - anodic polishing, which substantially improves the quality of dental prostheses realized by selective laser melting, obtaining prosthetic restorations with distinguished mechanical properties. The authors developed a theoretical model of electrochemical polishing, which was validated by a numerical simulation, obtaining very close results between the two models. After this analysis, it is possible to choose the proper polishing regime and the appropriate process parameters in order to obtain predetermined finishes for dental prostheses realized by selective laser melting.
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 564 (1) , 012029
Open AccessTheoretical and numerical researches on the electrochemical polishing of dental prostheses realized by selective laser melting
The paper presents and describes an electrochemical finishing process - anodic polishing, which substantially improves the quality of dental prostheses realized by selective laser melting, obtaining prosthetic restorations with distinguished mechanical properties. The authors developed a theoretical model of electrochemical polishing, which was validated by a numerical simulation, obtaining very close results between the two models. After this analysis, it is possible to choose the proper polishing regime and the appropriate process parameters in order to obtain predetermined finishes for dental prostheses realized by selective laser melting.
- Open Access
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 564 (1) , 012016
Using of additive technologies in fabrication of casting models
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 564 (1) , 012016
Open AccessUsing of additive technologies in fabrication of casting models
- Open Access
- 21 August 2019
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 290, 08001
Comparative study regarding the wear of gearwheels manufactured through additive technologies
The article presents the results of the experimental research on the wear of gearwheels manufactured by an additive technology. It was realized eight gearwheels with the same module and number of teeth by means fused deposition modelling technology from different materials, including PLA, ABS, CarbonFil, nylon. In order to determine the teeth wear, pitting, thinning of teeth at the base in a gear that requires a continuous and constant operation, a demonstration set-up was designed and realized to highlight the mechanical loads of the eight gearwheels made by additive technologies.
- 21 August 2019
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 290, 08001
Open AccessComparative study regarding the wear of gearwheels manufactured through additive technologies
The article presents the results of the experimental research on the wear of gearwheels manufactured by an additive technology. It was realized eight gearwheels with the same module and number of teeth by means fused deposition modelling technology from different materials, including PLA, ABS, CarbonFil, nylon. In order to determine the teeth wear, pitting, thinning of teeth at the base in a gear that requires a continuous and constant operation, a demonstration set-up was designed and realized to highlight the mechanical loads of the eight gearwheels made by additive technologies.
- 20 July 2019
- Published by Springer Nature
- p. 118-123
Constructive Solution for Multi-filament 3D Printing
- 20 July 2019
- Published by Springer Nature
- p. 118-123
Constructive Solution for Multi-filament 3D Printing
- Open Access
- 29 November 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 444 (4) , 042017
Study and realization of prosthetic dental models by additive technologies
- 29 November 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 444 (4) , 042017
Open AccessStudy and realization of prosthetic dental models by additive technologies
- Open Access
- 29 November 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 444 (4) , 042008
Study of deflection behavior of 3D printed leaf springs
The authors developed a research for studying the behaviour of 3D printed machine elements such as: clutches, springs, bellows, screws, nuts, gears, differential and planetary mechanisms. There are different applications where metallic springs cannot be used: corrosive, explosive, magnetic field, electromagnetic radiation, nuclear techniques and other applications or environments that require light spring masses.
- 29 November 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 444 (4) , 042008
Open AccessStudy of deflection behavior of 3D printed leaf springs
The authors developed a research for studying the behaviour of 3D printed machine elements such as: clutches, springs, bellows, screws, nuts, gears, differential and planetary mechanisms. There are different applications where metallic springs cannot be used: corrosive, explosive, magnetic field, electromagnetic radiation, nuclear techniques and other applications or environments that require light spring masses.