KUKohtaro Ujiie

Kohtaro Ujiie

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kohtaro Ujiie has a total of 200 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Earthquakes in wet rocks: competition between thermal pressurization, damage, and frictional melting?

    by Giovanni Toffol, Åke Fagereng, Joaquin Julve Lillo, Duncan D. Muir, Kohtaro Ujiie


  • Open Access

    Tracing fluid sources, their influence, and mechanical consequences in the Inuyama accretionary complex, Japan

    by Rebecca V M Robertson, Giovanni Toffol, Ake Fagereng, Kohtaro Ujiie, Joaquin Julve

    Vein stable isotope geochemistry and minerology provide a powerful record of fluid sources in subduction-zone fault systems, with implications for fault mechanics and seismic behaviour. We investigate fluid sources along out-of-sequence thrusts within an exceptionally well-preserved exhumed analogue of the shallow seismogenic zone: the Inuyama Sequence from the Jurassic Accretionary Complex in central Japan. The sequence comprises a coherent ocean-floor stratigraphy of siliceous claystone, ribbon chert, siliceous mudstone and clastic units, repeated by thrust imbrication.Vein and host rock stable isotope data reveal the presence of two distinct vein sets, implying two distinct fluids, within the thrust sheets. One fluid is a cool pore water (𝛿18O = - 4 to 0 ‰), that precipitated quartz (21.2 to 25.7 ‰), calcite (20.6 to 21.1 ‰), and rhodochrosite (25.2 ‰) veins at ∼40 to100 ˚C throughout the exposed thrust sheets. This is consistent with a seawater-derived pore fluid in the shallow accretionary prism. In contrast, some quartz (2.1 ‰) and calcite (-0.4 to 6.2 ‰) vein clusters require a different and warmer fluid (𝛿18O = - 11 to - 8 ‰) possibly of meteoric origin. These isotopically lighter veins are restricted to discrete shear zones with well-developed scaly fabric and are generally focused along the margins of mechanically competent blocks. Notably, these discrete shear zones have far higher carbon contents than the host rocks, be that through pressure solution or direct carbon precipitation. The isotopically lighter calcite and quartz veins record significantly higher temperatures (∼170 to 220 ˚C), confirmed with chlorite geothermometry, and are in line with Raman and vitrinite reflectance temperature estimates for peak conditions for the area (Kameda et al., 2012; Ujiie et al., 2021).The occurrence of isotopically light fluids at temperatures of 170-220˚C, corresponding to depths of ~ 8.5 to11 km given a relatively cool accretionary geotherm (20 ˚C/km), requires either (1) deep and lateral ingress of meteoric waters into the inner wedge as accreted sediments approached the coast, (2) late-stage vein precipitation during exhumation and fault reactivation, or (3) kinetic isotope effects associated with rapid precipitation during fault dilation that drives 𝛿18O lower than those predicted for equilibrium precipitation. Importantly, the hot and isotopically light fluids show a strong spatial relationship with highly concentrated black carbonaceous material that appears to control strain localisation at thrust sheet contacts. Consequently, these fluid-driven mechanical changes may have created carbon-rich asperities of very low frictional strength, encouraging local aseismic creep and stress build up at asperity boundaries.

  • Open Access

    Geostatistical characterisation of internal deformation of the Japan Trench frontal prism using seismic and logging-while-drilling data (Site C0019)

    by Jonathan Ford, Yasuyuki Nakamura, Maria-Jose Jurado, Kaitlin Schaible, Uisdean Nicholson, Mai-Linh Doan, Pei Pei, Yohei Hamada, Ayumu Miyakawa, Marianne Conin, et al.

    Understanding how deformation is distributed within accretionary prisms is essential to constrain their structural evolution, internal organisation and seismo-tsunamigenic potential. Researchers would typically use seismic images to characterise large-scale subsurface structure, but accretionary prisms often appear internally chaotic-to-transparent in such data, lacking coherent reflectors. This is likely due to strong lateral heterogeneity and stratal disruption around the scale of the seismic resolution, resulting from intense deformation of accreted sediments and remobilised mass transport deposits.IODP Expedition 405 “JTRACK” (October-December 2024) drilled the frontal prism of the Japan Trench subduction zone at Site C0019, targeting the decollement that hosted extremely large slip (>50 m) to the trench during the 2011 Mw 9.1 Tohoku-Oki earthquake. The expedition involved continuous coring and logging-while-drilling (LWD) through the prism, resulting in an improved time-depth tie with regional 2-D seismic profiles. At this site the seismic images show a highly chaotic internal prism, which introduces large uncertainties in structural interpretation and inhibits the upscaling and lateral extrapolation of borehole-scale observations from Site C0019.Here we present an approach to characterise this heterogeneous internal structure by inverting for scale-independent geostatistical parameters (vertical and lateral correlation lengths, dip) from the combined seismic image and LWD sonic velocity data. We use a Bayesian Markov Chain Monte Carlo approach that gives spatially varying, probabilistic estimates of the geostatistical parameters. The lateral correlation length, specifically, can be used as a proxy for the degree of stratal disruption/deformation, as shorter correlation lengths reflect more intense deformation. While the aspect ratio of the correlation lengths is generally well-constrained for seismic data, the estimate of vertical correlation length from the borehole logs is necessary to resolve the other individual geostatistical parameters away from the borehole.Initial results reveal that the degree of deformation varies significantly within the frontal prism, with the lateral correlation length varying between around 10-50 m. The degree of deformation appears to be compartmentalised by steeply dipping structures that could correspond to fault zones also observed in cores from C0019. These distinct changes in lateral correlation length correspond to lithological units interpreted from core observations. They also coincide with significant changes in vertical correlation length from the sonic log, anisotropy of seismic velocity from core samples and bedding orientation from borehole images. The results demonstrate that seismically-derived geostatistical parameters can delineate internal compartmentalisation of the frontal prism, providing a framework for tectonic and mass transport deposit interpretation and for the extrapolation of core-scale observations. Future work will extend this analysis using parallel profiles along the Japan Trench axis, allowing for mapping of frontal prism internal deformation in three dimensions away from existing drill sites.

  • Open Access

    Accretionary complex heterogeneity controls the faulting style of upper plate thrusts

    by Giovanni Toffol, Rebecca V M Robertson, Åke Fagereng, Kohtaro Ujiie, Joaquin Julve Lillo

    A relevant portion of seismic activity in subduction zones takes place along splay faults and other subsidiary structures of the subduction interface that cut across the upper plate accretionary complex. The heterogeneous lithology of accretionary complexes, reflecting the stratigraphy of the incoming ocean plate, exerts a first-order control on the seismic behaviour. Thus, investigating accretionary complexes exhumed from the seismogenic zone is relevant to understand upper plate seismicity.The Inuyama Sequence, part of the Jurassic Accretionary Complex of central Japan, is the ideal natural laboratory to investigate the lithological control on faulting style and seismic/aseismic behaviour in the shallow, sediment-dominated portion of an accretionary prism. It consists of a coherent chert-clastic complex with ocean-floor stratigraphy (in ascending order: siliceous claystone unit, ribbon chert unit, siliceous mudstone unit, and a clastic unit composed of lower mudstone, sandstone and upper mudstone) repeated six times by out-of-sequence thrusts that delimit the thrusts sheets [1].Here we focus on three of the out-of-sequence thrusts (T1, T2, T3 in ascending structural order) that are well exposed along the Kiso River: T1 separates siliceous mudstones of sheet 1 from black and grey cherts of sheet 2; T2 separates upper mudstones of sheet 2 from siliceous claystones and cherts of sheet 3; T3 separates upper mudstones of sheet 3 from siliceous mudstones and cherts of sheet 4 whose stratigraphic topping direction is overturned compared to the other sheets.Fault zones are 10–50 metres in thickness and mostly accommodate strain in the weaker clay-rich lithologies (siliceous mudstones and siliceous claystones), typically localizing deformation along carbonaceous-material-rich layers. A pervasive foliation in the siliceous mudstones of T1 and 50–100 cm thick slip zones with scaly fabric in siliceous claystones and siliceous mudstone suggest predominant deformation by aseismic creep. The stiffer cherts are also involved in the fault zones. In T1, the hanging-wall derived brecciated cherts host a mm-thick pseudotachylyte fault vein recording earthquake slip [2]. In T3 a localized fault core in the hanging-wall cherts is rich in quartz clasts with pervasive 2-5 µm spaced deformation lamellae, recording high stress pulses.Chlorite geothermometry applied on syn-kinematic chlorite and chlorite-quartz veins abundant in the fault rocks provide temperatures in the range 170–210 °C, in line with peak condition estimates for the area, confirming that the investigated structures were developed during accretion. Lower chlorite temperatures, down to 100°C, have also been measured in a scaly fabric fault zone, suggesting later reactivations of the fault at colder (shallower) conditions during exhumation.These preliminary results highlight the importance of the heterogeneous stratigraphy of accretionary complexes in controlling faulting style: while weak mudstones accommodated most of slip by aseismic creep, the stiffer cherts hosted occasional high-stress pulses associated with seismic ruptures. Further questions to answer include how slip is partitioned and what factors promote seismic ruptures in the stiffer lithologies. [1] Kimura, K., Hori, R. (1993) Journal of Structural Geology, 15(2), 145-161.[2] Ujiie, K., et al. (2021) Earth and Planetary Science letters, 554, 11638

  • Open Access

    Petrological and Geochemical Evidence for a Subducted Off-Axis Seamount Chain Beneath the Japan Trench Plate Boundary Fault Zone

    by Amy Gough, María-José Jurado, Tsuyoshi Ishikawa, Rina Fukuchi, Max Webb, Yasuyuki Nakamura, Asuka Yamaguchi, Marianne Conin, Uisdean Nicholson, Derya Gürer, et al.

    Understanding the structure of the incoming Pacific Plate is essential for reconstructing the tectonic evolution of the Japan Trench. International Ocean Discovery Program Expedition 405, “JTRACK,” drilled through the frontal prism and plate boundary fault zone of the Japan Trench and into the underlying Pacific Plate at Site-C0019, located close to the hypocentre of the 2011 Mw 9.0 Tohoku‑Oki earthquake. Here, we present new petrographic and geochemical results from five basaltic samples recovered from below the plate boundary fault zone (930–946 mbsf), which show the first direct geological evidence for a subducted volcanic body beneath this segment of the margin.Core and image logs from Expedition 405 indicate that the drilled interval comprises a repeated sequence of sheeted dykes, massive basalts, and pillow lavas, with at least one interbedded sedimentary horizon separating the successions. This architecture is incompatible with simple ocean-plate stratigraphy and instead indicates a later phase of volcanic activity interacting with pre-existing crust. Of the five samples analysed, one was taken from below the intercalated sedimentary horizon and four from above it. The four samples from above the sediments are systematically more evolved than the sample below. In the samples above, plagioclase shows anorthitic cores overprinted by albitised rims, pyroxenes are Mg-rich, and ilmenite is abundant. Several samples contain K-rich clays, disseminated sulphides, and Zr-rich domains, including possible baddeleyite. These features suggest interaction with sedimentary cover and progressive evolution of magma chemistry during the later stages of emplacement, alongside post-emplacement hydrothermal alteration. Whole-rock major and trace element data show enrichment in incompatible elements (K, Pb, Cs, Rb, Ba, Th, U) relative to typical MORB. K-metasomatism discrimination diagrams indicate that these signatures are not produced by alteration, supporting a primary magmatic origin. Together, the mineralogical and chemical characteristics point to a volcanic body formed off-axis on the Pacific Plate rather than at a spreading ridge.Integration with seismic interpretations suggests that this volcanic body, likely a seamount chain, was faulted prior to subduction and now lies partially perched on a horst, forming a structural high directly beneath the plate boundary fault zone. These results provide the first physical confirmation of a subducted, faulted seamount chain beneath the Japan Trench, offering new constraints on the structure and evolution of the incoming Pacific Plate.

  • Open Access

    Splay Fault Permeability Governs Fluid–Structure Interaction in Accretionary Wedges

    by Joaquin Julve, Åke Fagereng, Giovanni Toffol, Kohtaro Ujiie

    Interactions between upper plate deformation and plate interface seismicity in subduction zones remain poorly understood, but growing evidence indicates that fluid flow along splay faults modulates upper‐plate faulting. Field observations from two exhumed splay faults define end‐member scenarios where impermeable faults trap fluids in their footwall, whereas permeable faults channel fluids along them. Using finite element poroelastic models, with slip mode inferred solely from stress–pore‐fluid pressure patterns, we define two end‐member behaviors: (a) Impermeable, clay‐rich, mature splay faults favor footwall fluid flow, promoting low differential stress, dilation, and vein formation in the upper plate, while reducing pore‐fluid pressure and coupling the megathrust downdip of the intersection. (b) Permeable, less mature faults allow distributed upper‐plate fluid flow, increasing fluid flux, and differential stress, while maintaining plate interface overpressure and promoting creep. These models provide a framework for prism‐scale effects of splay fault permeability on shallow subduction zone deformation and seismicity.


  • Extreme plate boundary localization promotes shallow earthquake slip at the Japan Trench

    by J. D. Kirkpatrick, H. M. Savage, C. Regalla, S. Shreedharan, C. Ross, H. Okuda, U. Nicholson, K. Ujiie, R. Hackney, M. Conin, et al.

    The 2011 moment magnitude 9.1 Tohoku-oki earthquake is exceptional among great earthquakes for having peak slip of ~50 to 70 meters on the shallowest portion of the plate boundary megathrust. Drill cores and geophysical logs from International Ocean Discovery Program Expedition 405 demonstrate that the megathrust preferentially develops at the top or base of the pelagic clay in the sedimentary layers present on the incoming Pacific Plate, where pronounced contrasts in physical properties occur. This preference results in a narrow, weak fault located at a major mechanical contact between frontal prism mud and subducted sediments, which enhances the tendency for shallow seismic slip, suggesting that the Japan Trench may be more susceptible to ruptures with large shallow slip than are margins without weak clays.


  • Open Access

    Site C0026

    by Marianne Conin, James D. Kirkpatrick, Christine Regalla, Kohtaro Ujiie, Patrick M. Fulton, Shuichi Kodaira, Natsumi Okutsu, Lena Maeda, Sean Toczko, Nobuhisa Eguchi, et al.


  • Open Access

    Tracking Tsunamigenic Slip Across the Japan Trench (JTRACK)

    by S. Kodaira, M. Conin, P. Fulton, J. Kirkpatrick, C. Regalla, K. Ujiie, N. Okutsu, L. Maeda, S. Toczko, N. Eguchi, et al.

    Tracking Tsunamigenic Slip Across the Japan Trench (JTRACK)