P. D. Gkournelos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
P. D. Gkournelos has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Thanasis C. Triantafillou
Department of Civil Engineering, University of Patras, 26504 Patras, Greece
3 shared publications D. A. Bournas
Scientific Officer, Joint Research Centre, European Commission, 21027 Ispra (VA), Italy
1 shared publicationL. D. Azdejković
Ph.D. Candidate, Dept. of Civil Engineering, Univ. of Patras, Patras 26500, Greece
1 shared publication
Latest Publications
- 1 February 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 26 (1) , 04021061
Innovative and Eco-friendly Solutions for the Seismic Retrofitting of Natural Stone Masonry Walls with Textile Reinforced Mortar: In- and Out-of-Plane Behavior
The application of textile-reinforced mortars (TRM) on masonry walls constructed with natural stones was studied through a set of medium-scale experiments. Fourteen experiments were carried out in total, including in- and out-of-plane cyclic tests as well as two different strengthening configurations. The first consisted of a TRM made of a natural hydraulic lime (NHL) mortar, combined with a natural flax-fiber textile, while for the latter, a novel alkali-activated material (AAM) geopolymer mortar combined with basalt textile was employed. The use of such low-carbon footprint materials instead of conventional ones makes these systems environmentally friendlier, in line with the modern requirements for lowering CO2 emissions. Both solutions led to a substantial increase of the load-bearing capacity, up to 70% for both in- and out-of-plane experiments. Stiffness and energy dissipation characteristics of the masonry elements were improved as well. If some durability related issues of both configurations and feasibility ones of AAMs are addressed, they could provide good candidates for application in real-life structures.
- 1 February 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 26 (1) , 04021061
Innovative and Eco-friendly Solutions for the Seismic Retrofitting of Natural Stone Masonry Walls with Textile Reinforced Mortar: In- and Out-of-Plane Behavior
The application of textile-reinforced mortars (TRM) on masonry walls constructed with natural stones was studied through a set of medium-scale experiments. Fourteen experiments were carried out in total, including in- and out-of-plane cyclic tests as well as two different strengthening configurations. The first consisted of a TRM made of a natural hydraulic lime (NHL) mortar, combined with a natural flax-fiber textile, while for the latter, a novel alkali-activated material (AAM) geopolymer mortar combined with basalt textile was employed. The use of such low-carbon footprint materials instead of conventional ones makes these systems environmentally friendlier, in line with the modern requirements for lowering CO2 emissions. Both solutions led to a substantial increase of the load-bearing capacity, up to 70% for both in- and out-of-plane experiments. Stiffness and energy dissipation characteristics of the masonry elements were improved as well. If some durability related issues of both configurations and feasibility ones of AAMs are addressed, they could provide good candidates for application in real-life structures.
- 1 October 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 24 (5) , 04020049
Integrated Structural and Energy Retrofitting of Masonry Walls: Effect of In-Plane Damage on the Out-of-Plane Response
A total of 12 experiments were carried out to evaluate the effect of prior in-plane damage on the out-of-plane response of structurally and thermally retrofitted masonry wallettes, simulating simply the behavior of upgraded masonry infills in frame structures under seismic loading. The specimens were retrofitted with textile-reinforced mortar (TRM), which in some cases was combined with expanded polystyrene as thermal insulation material. Testing comprised in-plane diagonal compression and out-of-plane bending on walls with or without prior in-plane damage. Numerical simulations were also performed using fiber modeling, and they were found in good agreement with test results. The experimental results showed that in-plane loaded walls with TRM only or TRM/insulation retrofitting outperformed significantly their nonretrofitted counterparts. Out-of-plane loaded walls with combined TRM/thermal insulation performed much better than, or at least as well as, their TRM-only retrofitted counterparts, for the case with or without prior in-plane damage, respectively.
- 1 October 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 24 (5) , 04020049
Integrated Structural and Energy Retrofitting of Masonry Walls: Effect of In-Plane Damage on the Out-of-Plane Response
A total of 12 experiments were carried out to evaluate the effect of prior in-plane damage on the out-of-plane response of structurally and thermally retrofitted masonry wallettes, simulating simply the behavior of upgraded masonry infills in frame structures under seismic loading. The specimens were retrofitted with textile-reinforced mortar (TRM), which in some cases was combined with expanded polystyrene as thermal insulation material. Testing comprised in-plane diagonal compression and out-of-plane bending on walls with or without prior in-plane damage. Numerical simulations were also performed using fiber modeling, and they were found in good agreement with test results. The experimental results showed that in-plane loaded walls with TRM only or TRM/insulation retrofitting outperformed significantly their nonretrofitted counterparts. Out-of-plane loaded walls with combined TRM/thermal insulation performed much better than, or at least as well as, their TRM-only retrofitted counterparts, for the case with or without prior in-plane damage, respectively.