RJRakshit Joshi

Rakshit Joshi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rakshit Joshi has a total of 135 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Constraints for the Martian Crustal Structure From Rayleigh Waves Ellipticity of Large Seismic Events

    by Sebastián Carrasco, Brigitte Knapmeyer‐Endrun, Ludovic Margerin, Zongbo Xu, Rakshit Joshi, Martin Schimmel, Eleonore Stutzmann, Constantinos Charalambous, Philippe Lognonné, W. Bruce Banerdt

    For the first time, we measured the ellipticity of direct Rayleigh waves at intermediate periods (15–35 s) on Mars using the recordings of three large seismic Martian events, including S1222a, the largest event recorded by the InSight mission. These measurements, together with P‐to‐s receiver functions and P‐wave reflection times, were utilized for performing a joint inversion of the local crustal structure at the InSight landing site. Our inversion results are compatible with previously reported intra‐crustal discontinuities around 10 and 20 km depths, whereas the preferred models show a strong discontinuity at ∼37 km, which is interpreted as the crust‐mantle interface. Additionally, we support the presence of a shallow low‐velocity layer of 2–3 km thickness. Compared to nearby regions, lower seismic wave velocities are derived for the crust, suggesting a higher porosity or alteration of the whole local crust.


  • Open Access

    Constraints on Martian Crustal Lithology from Seismic Velocities by InSight

    by Brigitte Knapmeyer-Endrun, Jiaqi Li, Doyeon Kim, Ana-Catalina Plesa, Scott McLennan, Ernst Hauber, Rakshit Joshi, Jing Shi, Caroline Beghein, Mark Wieczorek, et al.

    Analysis of data from the seismometer SEIS on NASA’s InSight mission has by now provided a wealth of information on the crustal structure of Mars, both beneath the lander and at other locations on the planet. Here, we collect the P- and S-wave velocity information for kilometer-scale crustal layers available up to now and compare it to predictions by rock physics models to guide the interpretation in terms of crustal lithology.Modeling is performed based on the Hertz-Mindlin model for un- or poorly consolidated sediments, Dvorkin and Nur’s cemented-sand model for consolidated sediments and Berryman’s self-consistent approximation to simulate cracked rocks. Considered lithologies include basalt, andesite, dacite, kaolinite, and plagioclase, and cementation due to calcite, gypsum, halite and ice. We use Gassmann fluid substitution to study the effect of liquid water instead of atmosphere filling the pores or cracks.Below the lander, available constraints are based on Ps-receiver functions and vertical component autocorrelations for SV- and P-wave velocities, whereas SH-reflections and SsPp phases provide additional information on SH- and P-wave velocities in the uppermost 8-10 km, respectively. SS and PP precursors at the bouncing point of the most distant marsquake contain information on crustal velocities at a near-equatorial location far from InSight. Surface wave observations from two large impacts as well as the largest marsquake recorded by InSight provide average crustal velocities along their raypaths, which are distinct from the body wave results.The subsurface structure beneath the lander can be explained by 2 km of either unconsolidated basaltic sands, clay with a low amount (2%) of cementation, or cracked rocks (e.g. basalts with at least 12% porosity). Within the range of lithologies considered, the seismic velocities can neither be explained by intact rocks, nor rocks with completely filled pores, e.g. by ice, nor by fluid-saturated rocks. Below, down to a depth of about 10 km beneath InSight, both P- and SV-wave velocities are consistent with fractured basaltic rocks or plagioclase of at least 5% porosity, depending on crack aspect ratios. About 10% of that porosity needs to have a preferred orientation to explain the observed anisotropy. For porosities exceeding 12%, the measured velocities would also be consistent with water-saturated rocks. The transition to higher velocities at about 10 km depth beneath InSight can be modeled by more intact material, i.e. a porosity reduction by 50% compared to the layer above, which can be achieved by either cementation or a lower initial porosity.The SV-velocities derived by surface waves down to 25-30 km depth, averaging over a large part of Mars, are consistent with basalts of a porosity of less than 5% or nearly intact plagioclase. They could also be explained by rocks with a higher porosity if pores are filled by ice, but that is unlikely for the whole depth range considered. The velocities at larger depth, i.e. below about 20 km beneath InSight and 25-30 km along the surface wave paths, are consistent with intact basalt.

  • Open Access

    Constraints for the Martian crustal structure from Rayleigh waves ellipticity of large seismic events

    by Sebastián Carrasco, Brigitte Knapmeyer-Endrun, Ludovic Margerin, Zongbo Xu, Rakshit Joshi, Martin Schimmel, Eleonore Stutzmann, Constantinos Charalambous, Philippe Lognonné, William Bruce Banerdt

    For the first time, we measured the ellipticity of direct Rayleigh waves at long periods (15 - 35 s) on Mars using the recordings of three large seismic martian events, including S1222a, the largest event recorded by the InSight mission. These measurements, together with P-to-s receiver functions and P-wave reflection times, were utilized for performing a joint inversion of the local crust structure at the InSight landing site. Our inversion results are compatible with previously reported intra-crustal discontinuities around 10 and 20 km depths, whereas the preferred resulting models show a strong discontinuity at ~37 km, which is interpreted as the crust-mantle interface. We propose the presence of a top shallow low-velocity layer of 2-3 km thickness. Compared to nearby regions, lower seismic wave velocities are derived for the local crust, thus suggesting a higher porosity or alteration of the whole local crust.


  • Open Access

    Joint Inversion of Receiver Functions and Apparent Incidence Angles to Determine the Crustal Structure of Mars

    by Rakshit Joshi, Brigitte Knapmeyer‐Endrun, Klaus Mosegaard, M. A. Wieczorek, Heiner Igel, Ulrich R. Christensen, Philippe Lognonné

    Recent estimates of the crustal thickness of Mars show a bimodal result of either ∼20 or ∼40 km beneath the InSight lander. We propose an approach based on random matrix theory applied to receiver functions (RFs) to further constrain the subsurface structure. Assuming a spiked covariance model for our data, we first use the phase transition properties of the singular value spectrum of random matrices to detect coherent arrivals in the waveforms. Examples from terrestrial data show how the method works in different scenarios. We identify three previously undetected converted arrivals in the InSight data, including the first multiple from a deeper third interface. We then use this information to jointly invert RFs with the absolute S‐wave velocity information in the polarization of body waves. Results show a crustal thickness of 43 ± 5 km beneath the lander with two mid‐crustal interfaces at depths of 8 ± 1 and 21 ± 3 km.


  • Surface waves and crustal structure on Mars

    by D. Kim, W. B. Banerdt, S. Ceylan, D. Giardini, V. Lekić, P. Lognonné, C. Beghein, É. Beucler, S. Carrasco, C. Charalambous, et al.

    We detected surface waves from two meteorite impacts on Mars. By measuring group velocity dispersion along the impact-lander path, we obtained a direct constraint on crustal structure away from the InSight lander. The crust north of the equatorial dichotomy had a shear wave velocity of approximately 3.2 kilometers per second in the 5- to 30-kilometer depth range, with little depth variation. This implies a higher crustal density than inferred beneath the lander, suggesting either compositional differences or reduced porosity in the volcanic areas traversed by the surface waves. The lower velocities and the crustal layering observed beneath the landing site down to a 10-kilometer depth are not a global feature. Structural variations revealed by surface waves hold implications for models of the formation and thickness of the martian crust.


  • Open Access

    Joint Inversion of receiver functions and apparent incidence angles to determine the crustal structure of Mars

    by Rakshit Joshi, Brigitte Knapmeyer-Endrun, Klaus Mosegaard, Mark A. Wieczorek, Heiner Igel, Ulrich Christensen, Philippe Henri Lognonné

    Recent estimates of the crustal thickness of Mars show a bimodal result of either ∼20 km or ∼40 km beneath the InSight lander. We propose an approach based on random matrix theory applied to receiver functions to further constrain the subsurface structure. Assuming a spiked covariance model for our data, we first use the phase transition properties of the singular value spectrum of random matrices to detect coherent arrivals in the waveforms. Examples from terrestrial data show how the method works in different scenarios. We identify three new converted arrivals in the InSight data, including the second multiply reflected phase from a deeper third interface. We then use this information to jointly invert receiver functions with the absolute S-wave velocity information in the polarization of body waves. Results show a crustal thickness of 43±5 km beneath the lander with two mid-crustal interfaces at depths of 8.5±1.5 km and 22±3 km.


  • Open Access

    InSight Constraints on the Global Character of the Martian Crust

    by Mark A. Wieczorek, Adrien Broquet, Scott M. McLennan, Attilio Rivoldini, Matthew Golombek, Daniele Antonangeli, Caroline Beghein, Domenico Giardini, Tamara Gudkova, Szilárd Gyalay, et al.

    Analyses of seismic data from the InSight mission have provided the first in situ constraints on the thickness of the crust of Mars. These crustal thickness constraints are currently limited to beneath the lander that is located in the northern lowlands, and we use gravity and topography data to construct global crustal thickness models that satisfy the seismic data. These models consider a range of possible mantle and core density profiles, a range of crustal densities, a low‐density surface layer, and the possibility that the crustal density of the northern lowlands is greater than that of the southern highlands. Using the preferred InSight three‐layer seismic model of the crust, the average crustal thickness of the planet is found to lie between 30 and 72 km. Depending on the choice of the upper mantle density, the maximum permissible density of the northern lowlands and southern highlands crust is constrained to be between 2,850 and 3,100 kg m−3. These crustal densities are lower than typical Martian basaltic materials and are consistent with a crust that is on average more felsic than the materials found at the surface. We argue that a substantial portion of the crust of Mars is a primary crust that formed during the initial differentiation of the planet. Various hypotheses for the origin of the observed intracrustal seisimic layers are assessed, with our preferred interpretation including thick volcanic deposits, ejecta from the Utopia basin, porosity closure, and differentiation products of a Borealis impact melt sheet.


  • Open Access

    Improving Constraints on Planetary Interiors With PPs Receiver Functions

    by D. Kim, V. Lekić, J. C. E. Irving, N. Schmerr, B. Knapmeyer‐Endrun, R. Joshi, M. P. Panning, B. Tauzin, F. Karakostas, R. Maguire, et al.

    Seismological constraints obtained from receiver function (RF) analysis provide important information about the crust and mantle structure. Here, we explore the utility of the free‐surface multiple of the P‐wave (PP) and the corresponding conversions in RF analysis. Using earthquake records, we demonstrate the efficacy of PPs‐RFs before illustrating how they become especially useful when limited data is available in typical planetary missions. Using a transdimensional hierarchical Bayesian deconvolution approach, we compute robust P‐to‐S (Ps)‐ and PPs‐RFs with InSight recordings of five marsquakes. Our Ps‐RF results verify the direct Ps converted phases reported by previous RF analyses with increased coherence and reveal other phases including the primary multiple reverberating within the uppermost layer of the Martian crust. Unlike the Ps‐RFs, our PPs‐RFs lack an arrival at 7.2 s lag time. Whereas Ps‐RFs on Mars could be equally well fit by a two‐ or three‐layer crust, synthetic modeling shows that the disappearance of the 7.2 s phase requires a three‐layer crust, and is highly sensitive to velocity and thickness of intra‐crustal layers. We show that a three‐layer crust is also preferred by S‐to‐P (Sp)‐RFs. While the deepest interface of the three‐layer crust represents the crust‐mantle interface beneath the InSight landing site, the other two interfaces at shallower depths could represent a sharp transition between either fractured and unfractured materials or thick basaltic flows and pre‐existing crustal materials. PPs‐RFs can provide complementary constraints and maximize the extraction of information about crustal structure in data‐constrained circumstances such as planetary missions.


  • Open Access

    Joint Inversion of Receiver Functions and Apparent Incidence Angles for Sparse Seismic Data

    by Rakshit Joshi, Brigitte Knapmeyer‐Endrun, Klaus Mosegaard, Heiner Igel, Ulrich R. Christensen

    The estimation of crustal structure and thickness is essential in understanding the formation and evolution of terrestrial planets. Initial planetary missions with seismic instrumentation on board face the additional challenge of dealing with seismic activity levels that are only poorly constrained a priori. For example, the lack of plate tectonics on Mars leads to low seismicity, which could, in turn, hinder the application of many terrestrial data analysis techniques. Here we propose using a joint inversion of receiver functions and apparent incidence angles, which contain information on absolute S‐wave velocities of the subsurface. Since receiver function inversions suffer from a velocity depth trade‐off, we in addition exploit a simple relation that defines apparent S‐wave velocity as a function of observed apparent P‐wave incidence angles to constrain the parameter space. We then use the Neighborhood Algorithm for the inversion of a suitable joint objective function. The resulting ensemble of models is then used to derive uncertainty estimates for each model parameter. In preparation for the analysis of data from the InSight mission, we show the application of our proposed method on Mars synthetics and sparse terrestrial data sets from different geological settings using both single and multiple events. We use information‐theoretic statistical tests as model selection criteria and discuss their relevance and implications in a seismological framework.


  • Top Cited Papers

    Thickness and structure of the martian crust from InSight seismic data

    by Brigitte Knapmeyer-Endrun, Mark P. Panning, Felix Bissig, Rakshit Joshi, Amir Khan, Doyeon Kim, Vedran Lekić, Benoit Tauzin, Saikiran Tharimena, Matthieu Plasman, et al.

    Single seismometer structure: Because of the lack of direct seismic observations, the interior structure of Mars has been a mystery. Khan et al. , Knapmeyer-Endrun et al. , and Stähler et al. used recently detected marsquakes from the seismometer deployed during the InSight mission to map the interior of Mars (see the Perspective by Cottaar and Koelemeijer). Mars likely has a 24- to 72-kilometer-thick crust with a very deep lithosphere close to 500 kilometers. Similar to the Earth, a low-velocity layer probably exists beneath the lithosphere. The crust of Mars is likely highly enriched in radioactive elements that help to heat this layer at the expense of the interior. The core of Mars is liquid and large, ∼1830 kilometers, which means that the mantle has only one rocky layer rather than two like the Earth has. These results provide a preliminary structure of Mars that helps to constrain the different theories explaining the chemistry and internal dynamics of the planet. Science , abf2966, abf8966, abi7730, this issue p. 434 , p. 438 , p. 443 see also abj8914, p. 388