Brendan A. Anzures
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Brendan A. Anzures has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Kayla Iacovino
Jacobs, NASA Johnson Space Center Houston TX USA
3 shared publications Ralph E. Milliken
3 shared publicationsStephen W. Parman
3 shared publications- Francis M. McCubbin
NASA Johnson Space Center Houston Texas USA
2 shared publications Kathleen E. Vander Kaaden
Jacobs, NASA Johnson Space Center, 2101 NASA Parkway, Houston, Texas 77058, U.S.A.
2 shared publications- Kelsey Prissel
Jacobs-JETS, Astromaterials Research and Exploration Science Division, NASA Johnson Space Center, Houston, USA
2 shared publications
Latest Publications
- Open Access
- 11 February 2026
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 562 (1)
Assessing effects of particle size on water content estimates of carbonaceous chondrites and their parent bodies
The Hayabusa2 and OSIRIS-REx asteroid sample-return missions have recently encountered the hydrous C-class asteroids 162173 Ryugu and 101955 Bennu, respectively. Mission data reveal that these objects are rubble pile asteroids with surfaces that are dominated by boulders. Previous studies of carbonaceous chondrite (CC) powders showed that certain reflectance spectral parameters are highly correlated with hydrogen. As such, additional laboratory studies are warranted to understand how to convert OH/H 2 O absorptions seen in spectral reflectance to estimates of absolute water content of objects that lack fine-grained regolith. This study compares OH/H 2 O reflectance spectral absorption features observed for several intact CM2 chips and size-sieved powder fractions; these data are then compared with independent estimates of bulk water content. Together, the results are used to construct empirical relationships between reflectance band strength, water content and particle size. We find that for CM2s a variety of band parameter values related to OH/H 2 O increase with decreasing particle size. If particle size is not properly accounted for, this may lead to water content underestimates of as much as 6 wt%. This highlights the need for improved methods to extract quantitative information from reflectance spectra of regolith-poor (rubble-pile) asteroids as well as areas of the Moon.
- 11 February 2026
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 562 (1)
Open AccessAssessing effects of particle size on water content estimates of carbonaceous chondrites and their parent bodies
The Hayabusa2 and OSIRIS-REx asteroid sample-return missions have recently encountered the hydrous C-class asteroids 162173 Ryugu and 101955 Bennu, respectively. Mission data reveal that these objects are rubble pile asteroids with surfaces that are dominated by boulders. Previous studies of carbonaceous chondrite (CC) powders showed that certain reflectance spectral parameters are highly correlated with hydrogen. As such, additional laboratory studies are warranted to understand how to convert OH/H 2 O absorptions seen in spectral reflectance to estimates of absolute water content of objects that lack fine-grained regolith. This study compares OH/H 2 O reflectance spectral absorption features observed for several intact CM2 chips and size-sieved powder fractions; these data are then compared with independent estimates of bulk water content. Together, the results are used to construct empirical relationships between reflectance band strength, water content and particle size. We find that for CM2s a variety of band parameter values related to OH/H 2 O increase with decreasing particle size. If particle size is not properly accounted for, this may lead to water content underestimates of as much as 6 wt%. This highlights the need for improved methods to extract quantitative information from reflectance spectra of regolith-poor (rubble-pile) asteroids as well as areas of the Moon.
- Open Access
- 4 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Percolative sulfide core formation in oxidized planetary bodies
Models of planetary core formation traditionally involve the fractionation of Fe,Ni-metal melts from silicate mantles after extensive silicate melting. However, in planetary bodies that form farther from their central star, where moderately volatile elements are more abundant, high concentrations of oxygen and sulfur stabilize Fe,Ni-sulfides over metals. Here we show that percolative sulfide melt migration can occur in primitive, oxidized mineral assemblages prior to silicate melting in partial melting experiments with meteorites. Complementary experiments with partially molten synthetic sulfides show that fractionation of liquid sulfide from solid residues yields distinct noble metal (Os, Ru, Ir, Pd, and Pt) trace element proportions that match those manifested in the most oxidized meteoritic residues, the brachinites, as well as their complementary basaltic silicate melts. Our experiments provide robust evidence for percolative sulfide melt fractionation in meteorites and indicate that sulfide-dominated cores would be expected in oxidized planetary bodies, including Mars.
- 4 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Open AccessPercolative sulfide core formation in oxidized planetary bodies
Models of planetary core formation traditionally involve the fractionation of Fe,Ni-metal melts from silicate mantles after extensive silicate melting. However, in planetary bodies that form farther from their central star, where moderately volatile elements are more abundant, high concentrations of oxygen and sulfur stabilize Fe,Ni-sulfides over metals. Here we show that percolative sulfide melt migration can occur in primitive, oxidized mineral assemblages prior to silicate melting in partial melting experiments with meteorites. Complementary experiments with partially molten synthetic sulfides show that fractionation of liquid sulfide from solid residues yields distinct noble metal (Os, Ru, Ir, Pd, and Pt) trace element proportions that match those manifested in the most oxidized meteoritic residues, the brachinites, as well as their complementary basaltic silicate melts. Our experiments provide robust evidence for percolative sulfide melt fractionation in meteorites and indicate that sulfide-dominated cores would be expected in oxidized planetary bodies, including Mars.
- 1 April 2025
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 110 (4) , 570-581
Synthesis and characterization of Fe-poor olivine with applications to the surface of Mercury
Results from X-ray remote sensing aboard NASA’s MErcury Surface Space ENvironment GEochemistry and Ranging (MESSENGER) spacecraft have demonstrated that Mercury has a low, but measurable, concentration of Fe on its surface. However, ultraviolet to near-infrared spectroscopic measurements of the mercurian surface do not show the 1 μm absorption band characteristic of ferromagnesian silicates. This observation is consistent across multiple Fe-bearing terranes with a range of ages, suggesting the Fe present on Mercury’s surface may not be stored within silicate phases. To further constrain the possible mineralogy and composition of Fe-bearing phases on Mercury, we used various spectroscopic techniques to characterize synthetic olivine with minor amounts of Fe (i.e., Fo99.62–Fo99.99) and more Fe-rich natural olivines. Our results indicate that the distinctive 1 μm absorption band of olivine is detectable in reflectance spectra of olivine at a concentration as low as 0.03 wt% FeO and 0.01 wt% in continuum removed data. Additionally, MESSENGER’s lack of a 1 μm absorption, taking into account Mercury Dual Imaging System (MDIS)’s limited spectral resolution and Mercury Atmospheric and Surface Composition Spectrometer (MASCS)’s high signal-to-noise ratio, suggests there is <0.38 wt%, and likely <0.01 wt%, FeO on the surface of Mercury. Because the 1 μm band is not observed in surface spectra, these results indicate that the Fe observed on the surface of Mercury is not bound in an olivine structure. Rather, we posit that Fe is present as nano-phase and macroscopic Fe-rich metal or Fe-sulfide that formed as a result of space weathering and igneous smelting processes. Looking forward to ESA/JAXA’s BepiColombo mission that has a planned Mercury orbit arrival time in December 2025, Mercury Radiometer and Thermal Infrared Imaging Spectrometer (MERTIS) mid-infrared spectra should provide a mineralogical detection or absence of olivine where MIR spectral features are still present even in synthetic olivines with minor amounts of Fe (Fo99.99).
- 1 April 2025
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 110 (4) , 570-581
Synthesis and characterization of Fe-poor olivine with applications to the surface of Mercury
Results from X-ray remote sensing aboard NASA’s MErcury Surface Space ENvironment GEochemistry and Ranging (MESSENGER) spacecraft have demonstrated that Mercury has a low, but measurable, concentration of Fe on its surface. However, ultraviolet to near-infrared spectroscopic measurements of the mercurian surface do not show the 1 μm absorption band characteristic of ferromagnesian silicates. This observation is consistent across multiple Fe-bearing terranes with a range of ages, suggesting the Fe present on Mercury’s surface may not be stored within silicate phases. To further constrain the possible mineralogy and composition of Fe-bearing phases on Mercury, we used various spectroscopic techniques to characterize synthetic olivine with minor amounts of Fe (i.e., Fo99.62–Fo99.99) and more Fe-rich natural olivines. Our results indicate that the distinctive 1 μm absorption band of olivine is detectable in reflectance spectra of olivine at a concentration as low as 0.03 wt% FeO and 0.01 wt% in continuum removed data. Additionally, MESSENGER’s lack of a 1 μm absorption, taking into account Mercury Dual Imaging System (MDIS)’s limited spectral resolution and Mercury Atmospheric and Surface Composition Spectrometer (MASCS)’s high signal-to-noise ratio, suggests there is <0.38 wt%, and likely <0.01 wt%, FeO on the surface of Mercury. Because the 1 μm band is not observed in surface spectra, these results indicate that the Fe observed on the surface of Mercury is not bound in an olivine structure. Rather, we posit that Fe is present as nano-phase and macroscopic Fe-rich metal or Fe-sulfide that formed as a result of space weathering and igneous smelting processes. Looking forward to ESA/JAXA’s BepiColombo mission that has a planned Mercury orbit arrival time in December 2025, Mercury Radiometer and Thermal Infrared Imaging Spectrometer (MERTIS) mid-infrared spectra should provide a mineralogical detection or absence of olivine where MIR spectral features are still present even in synthetic olivines with minor amounts of Fe (Fo99.99).
- Open Access
- 19 November 2024
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 388, 61-77
An oxygen fugacity-temperature-pressure-composition model for sulfide speciation in Mercurian magmas
- 19 November 2024
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 388, 61-77
Open AccessAn oxygen fugacity-temperature-pressure-composition model for sulfide speciation in Mercurian magmas
- Open Access
- 1 September 2024
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 109 (9) , 1513-1522
First widespread occurrence of rare phosphate chladniite in a meteorite, winonaite Graves Nunataks (GRA) 12510: Implications for phosphide–phosphate redox buffered genesis in meteorites
The first widespread occurrence of rare Na-, Ca-, and Mg, Mn, Fe-bearing phosphate chladniite was observed in meteorite Graves Nunataks (GRA) 12510, which is a primitive achondrite that sits within the winonaite class. Numerous 1–500 µm chladniite grains were found, often on the margins between silicate clasts and the kamacite portions of the large metal veins that permeated through the sample. The largest chladniite grains are associated with merrillite, kamacite, taenite, troilite, albite, forsterite, diopside, and enstatite, with a few tiny chladniite grains and an apatite grain enclosed within merrillite. GRA 12510s average chladniite composition is Na2.7Ca1.25(Mg10.02Mn0.69Fe0.20)Σ10.91(PO4)9. Electron backscattered diffraction (EBSD) patterns indicate varying degrees of nucleation and growth of chladniite grains. Additionally, the first pure Raman spectrum of chladniite is described here, revealing primary ν1 bands at 954, 974, and especially 984 cm–1. The co-occurrence and close association of merrillite, apatite, chladniite, and P-bearing metallic phases within GRA 12510 suggests that the fO2 of IW-2 to IW-4 is an intrinsic property of the precursor chondritic material, and the phosphate-phosphide reaction may have buffered the final winonaite and IAB iron meteorite phase assemblages. Altogether, chladniite appears to form alongside other phosphates, with their chemistries reflecting the diverse environment of their formation. Meteoritic chladniite likely formed through subsolidus oxidation of schreibersite, scavenging Na from albite, Ca from diopside, Mg from enstatite/forsterite, Fe from kamacite/taenite, and Mn from alabandite/chromite when available. A P0-P5+ redox-buffered environment also has implications for thermometry and fast cooling rates, although more experiments are needed to extrapolate powder reaction rates to those of larger crystals. Furthermore, phosphide-phosphate buffered experiments may aid in investigating equilibrium chemistry at fO2 values between IW-2 and IW-4, which have been challenging to explore experimentally due to the limited availability of solid metal-metal oxide buffers between IW (Fe-FeO) and IW-5 (Cr-Cr2O3) at temperatures and pressures relevant to planetary interiors. Future investigations of phosphide-phosphate redox-buffered genesis at fO2 values between IW-2 and IW-4 have important implications for primitive meteorite constituents (e.g., CAI values), partially differentiated planetesimals and planets, including Mercury and core formation on Earth.
- 1 September 2024
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 109 (9) , 1513-1522
Open AccessFirst widespread occurrence of rare phosphate chladniite in a meteorite, winonaite Graves Nunataks (GRA) 12510: Implications for phosphide–phosphate redox buffered genesis in meteorites
The first widespread occurrence of rare Na-, Ca-, and Mg, Mn, Fe-bearing phosphate chladniite was observed in meteorite Graves Nunataks (GRA) 12510, which is a primitive achondrite that sits within the winonaite class. Numerous 1–500 µm chladniite grains were found, often on the margins between silicate clasts and the kamacite portions of the large metal veins that permeated through the sample. The largest chladniite grains are associated with merrillite, kamacite, taenite, troilite, albite, forsterite, diopside, and enstatite, with a few tiny chladniite grains and an apatite grain enclosed within merrillite. GRA 12510s average chladniite composition is Na2.7Ca1.25(Mg10.02Mn0.69Fe0.20)Σ10.91(PO4)9. Electron backscattered diffraction (EBSD) patterns indicate varying degrees of nucleation and growth of chladniite grains. Additionally, the first pure Raman spectrum of chladniite is described here, revealing primary ν1 bands at 954, 974, and especially 984 cm–1. The co-occurrence and close association of merrillite, apatite, chladniite, and P-bearing metallic phases within GRA 12510 suggests that the fO2 of IW-2 to IW-4 is an intrinsic property of the precursor chondritic material, and the phosphate-phosphide reaction may have buffered the final winonaite and IAB iron meteorite phase assemblages. Altogether, chladniite appears to form alongside other phosphates, with their chemistries reflecting the diverse environment of their formation. Meteoritic chladniite likely formed through subsolidus oxidation of schreibersite, scavenging Na from albite, Ca from diopside, Mg from enstatite/forsterite, Fe from kamacite/taenite, and Mn from alabandite/chromite when available. A P0-P5+ redox-buffered environment also has implications for thermometry and fast cooling rates, although more experiments are needed to extrapolate powder reaction rates to those of larger crystals. Furthermore, phosphide-phosphate buffered experiments may aid in investigating equilibrium chemistry at fO2 values between IW-2 and IW-4, which have been challenging to explore experimentally due to the limited availability of solid metal-metal oxide buffers between IW (Fe-FeO) and IW-5 (Cr-Cr2O3) at temperatures and pressures relevant to planetary interiors. Future investigations of phosphide-phosphate redox-buffered genesis at fO2 values between IW-2 and IW-4 have important implications for primitive meteorite constituents (e.g., CAI values), partially differentiated planetesimals and planets, including Mercury and core formation on Earth.
- Open Access
- 12 August 2024
- Published by Springer Nature in Research Square
Percolative Sulfide Core Formation in Oxidized Planetary Bodies
Models of planetary core formation traditionally involve the fractionation of Fe,Ni-metal melts from silicate mantles after extensive silicate melting. However, in planetary bodies that form farther from their central star, where moderately volatile elements are more abundant, high concentrations of oxygen and sulfur stabilize Fe,Ni-sulfides over metals. Meteorite partial melting experiments show that percolative sulfide melt migration can occur in primitive, oxidized mineral assemblages prior to silicate melting. Complementary partial melting experiments with synthetic sulfides show that fractionation of liquid sulfide from solid residues yields distinct noble metal (Os, Ru, Ir, Pd, and Pt) trace element proportions that match those manifested in the most oxidized meteoritic residues, the brachinites, as well as their complementary basaltic melts. These experiments provide the first reported evidence for percolative sulfide melt fractionation in meteorites and indicate that sulfide-dominated cores would be expected in oxidized planetary bodies as percolative sulfide segregation began at lower temperatures and earlier stages of melting compared to metallic core formation.
- 12 August 2024
- Published by Springer Nature in Research Square
Open AccessPercolative Sulfide Core Formation in Oxidized Planetary Bodies
Models of planetary core formation traditionally involve the fractionation of Fe,Ni-metal melts from silicate mantles after extensive silicate melting. However, in planetary bodies that form farther from their central star, where moderately volatile elements are more abundant, high concentrations of oxygen and sulfur stabilize Fe,Ni-sulfides over metals. Meteorite partial melting experiments show that percolative sulfide melt migration can occur in primitive, oxidized mineral assemblages prior to silicate melting. Complementary partial melting experiments with synthetic sulfides show that fractionation of liquid sulfide from solid residues yields distinct noble metal (Os, Ru, Ir, Pd, and Pt) trace element proportions that match those manifested in the most oxidized meteoritic residues, the brachinites, as well as their complementary basaltic melts. These experiments provide the first reported evidence for percolative sulfide melt fractionation in meteorites and indicate that sulfide-dominated cores would be expected in oxidized planetary bodies as percolative sulfide segregation began at lower temperatures and earlier stages of melting compared to metallic core formation.
- Open Access
- 12 November 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 126 (11)
Experimental Investigation of Mercury's Magma Ocean Viscosity: Implications for the Formation of Mercury's Cumulate Mantle, Its Subsequent Dynamic Evolution, and Crustal Petrogenesis
Mercury has a compositionally diverse surface that was produced by different periods of igneous activity suggesting heterogeneous mantle sources. Understanding the structure of Mercury's mantle formed during the planet's magma ocean stage could help in developing a petrologic model for Mercury, and thus, understanding its dynamic history in the context of crustal petrogenesis. We present results of falling sphere viscometry experiments on late‐stage Mercurian magma ocean analogue compositions conducted at the Advanced Photon Source, beamline 16‐BM‐B, Argonne National Laboratory. Owing to the presence of sulfur on the surface of Mercury, two compositions were tested, one with sulfur and one without. The liquids have viscosities of 0.6–3.9 (sulfur‐bearing; 2.6–6.2 GPa) and 0.6–10.9 Pa·s (sulfur‐free; 3.2–4.5 GPa) at temperatures of 1600–2000°C. We present new viscosity models that enable extrapolation beyond the experimental conditions and evaluate grain growth and the potential for crystal entrainment in a cooling, convecting magma ocean. We consider scenarios with and without a graphite flotation crust, suggesting endmember outcomes for Mercury's mantle structure. With a graphite flotation crust, crystallization of the mantle would be fractional with negatively buoyant minerals sinking to form a stratified cumulate pile according to the crystallization sequence. Without a flotation crust, crystals may remain entrained in the convecting liquid during solidification, producing a homogeneous mantle. In the context of these endmember models, the surface could result from dynamical stirring or mixing of a mantle that was initially heterogeneous, or potentially from different extents of melting of a homogeneous mantle.
- 12 November 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 126 (11)
Open AccessExperimental Investigation of Mercury's Magma Ocean Viscosity: Implications for the Formation of Mercury's Cumulate Mantle, Its Subsequent Dynamic Evolution, and Crustal Petrogenesis
Mercury has a compositionally diverse surface that was produced by different periods of igneous activity suggesting heterogeneous mantle sources. Understanding the structure of Mercury's mantle formed during the planet's magma ocean stage could help in developing a petrologic model for Mercury, and thus, understanding its dynamic history in the context of crustal petrogenesis. We present results of falling sphere viscometry experiments on late‐stage Mercurian magma ocean analogue compositions conducted at the Advanced Photon Source, beamline 16‐BM‐B, Argonne National Laboratory. Owing to the presence of sulfur on the surface of Mercury, two compositions were tested, one with sulfur and one without. The liquids have viscosities of 0.6–3.9 (sulfur‐bearing; 2.6–6.2 GPa) and 0.6–10.9 Pa·s (sulfur‐free; 3.2–4.5 GPa) at temperatures of 1600–2000°C. We present new viscosity models that enable extrapolation beyond the experimental conditions and evaluate grain growth and the potential for crystal entrainment in a cooling, convecting magma ocean. We consider scenarios with and without a graphite flotation crust, suggesting endmember outcomes for Mercury's mantle structure. With a graphite flotation crust, crystallization of the mantle would be fractional with negatively buoyant minerals sinking to form a stratified cumulate pile according to the crystallization sequence. Without a flotation crust, crystals may remain entrained in the convecting liquid during solidification, producing a homogeneous mantle. In the context of these endmember models, the surface could result from dynamical stirring or mixing of a mantle that was initially heterogeneous, or potentially from different extents of melting of a homogeneous mantle.
- 1 October 2020
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 286, 1-18
Effect of sulfur speciation on chemical and physical properties of very reduced mercurian melts
- 1 October 2020
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 286, 1-18
Effect of sulfur speciation on chemical and physical properties of very reduced mercurian melts
- Open Access
- 20 August 2020
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 125 (8)
Photon‐Stimulated Desorption of MgS as a Potential Source of Sulfur in Mercury's Exosphere
Mercury has a relatively high sulfur content on its surface, and a signal consistent with ionized atomic sulfur (S+) was observed by the fast ion plasma spectrometer (FIPS) instrument on the MESSENGER spacecraft. To help confirm this assignment and to better constrain the sources of exospheric sulfur at Mercury, 193 nm photon‐stimulated desorption (PSD) of neutral sulfur atoms (S0) from MgS substrates was studied using resonance‐enhanced multiphoton ionization (REMPI) spectroscopy and time‐of‐flight (TOF) mass spectrometry. Though the PSD process is inherently nonthermal, the measured velocities of ejected S0 were fit using flux‐weighted Maxwellian distributions with translation energies expressed as translational “temperatures” Ttrans = /μkB. A bimodal distribution consisting of both thermal (Ttrans = 300 K) and suprathermal (Ttrans > 1,000 K) components in roughly a 2:1 ratio was found to best fit the data. The PSD cross‐section was measured to be approximately 4 × 10−22 cm2 and, together with the velocity distributions, was used to calculate the PSD source rate of S0 into the exosphere of Mercury. Exosphere simulations using the calculated rates demonstrate that PSD is likely the primary source of S0 in Mercury's exosphere at low (<1,000 km) altitudes.
- 20 August 2020
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 125 (8)
Open AccessPhoton‐Stimulated Desorption of MgS as a Potential Source of Sulfur in Mercury's Exosphere
Mercury has a relatively high sulfur content on its surface, and a signal consistent with ionized atomic sulfur (S+) was observed by the fast ion plasma spectrometer (FIPS) instrument on the MESSENGER spacecraft. To help confirm this assignment and to better constrain the sources of exospheric sulfur at Mercury, 193 nm photon‐stimulated desorption (PSD) of neutral sulfur atoms (S0) from MgS substrates was studied using resonance‐enhanced multiphoton ionization (REMPI) spectroscopy and time‐of‐flight (TOF) mass spectrometry. Though the PSD process is inherently nonthermal, the measured velocities of ejected S0 were fit using flux‐weighted Maxwellian distributions with translation energies expressed as translational “temperatures” Ttrans = /μkB. A bimodal distribution consisting of both thermal (Ttrans = 300 K) and suprathermal (Ttrans > 1,000 K) components in roughly a 2:1 ratio was found to best fit the data. The PSD cross‐section was measured to be approximately 4 × 10−22 cm2 and, together with the velocity distributions, was used to calculate the PSD source rate of S0 into the exosphere of Mercury. Exosphere simulations using the calculated rates demonstrate that PSD is likely the primary source of S0 in Mercury's exosphere at low (<1,000 km) altitudes.
- 1 March 2020
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 105 (3) , 375-381
XANES spectroscopy of sulfides stable under reducing conditions
X-ray absorption near-edge structure (XANES) spectroscopy is a powerful technique to quantitatively investigate sulfur speciation in geologically complex materials such as minerals, glasses, soils, organic compounds, industrial slags, and extraterrestrial materials. This technique allows non-destructive investigation of the coordination chemistry and oxidation state of sulfur species ranging from sulfide (2–oxidation state) to sulfate (6+ oxidation state). Each sulfur species has a unique spectral shape with a characteristic K-edge representing the s → p and d hybridization photoelectron transitions. As such, sulfur speciation is used to measure the oxidation state of samples by comparing the overall XANES spectra to that of reference compounds. Although many S XANES spectral standards exist for terrestrial applications under oxidized conditions, new sulfide standards are needed to investigate reduced (oxygen fugacity, fO2, below IW) silicate systems relevant for studies of extraterrestrial materials and systems. Sulfides found in certain meteorites (e.g., enstatite chondrites and aubrites) and predicted to exist on Mercury, such as CaS (oldhamite), MgS (niningerite), and FeCr2S4 (daubréelite), are stable at fO2 below IW-3 but rapidly oxidize to sulfate and/or produce sulfurous gases under terrestrial surface conditions. XANES spectra of these compounds collected to date have been of variable quality, possibly due to the unstable nature of certain sulfides under typical (e.g., oxidizing) laboratory conditions. A new set of compounds was prepared for this study and their XANES spectra are analyzed for comparison with potential extraterrestrial analogs. S K-edge XANES spectra were collected at Argonne National Lab for FeS (troilite), MnS (alabandite), CaS (oldhamite), MgS (niningerite), Ni1–xS, NiS2, CaSO4 (anhydrite), MgSO4, FeSO4, Fe2(SO4)3, FeCr2S4 (daubréelite), Na2S, Al2S3, Ni7S6, and Ni3S2; the latter five were analyzed for the first time using XANES. These standards expand upon the existing S XANES end-member libraries at a higher spectral resolution (0.25 eV steps) near the S K-edge. Processed spectra, those that have been normalized and “flattened,” are compared to quantify uncertainties due to data processing methods. Future investigations that require well-characterized sulfide standards, such as the ones presented here, may have important implications for understanding sulfur speciation in reduced silicate glasses and minerals with applications for the early Earth, Moon, Mercury, and enstatite chondrites.
- 1 March 2020
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 105 (3) , 375-381
XANES spectroscopy of sulfides stable under reducing conditions
X-ray absorption near-edge structure (XANES) spectroscopy is a powerful technique to quantitatively investigate sulfur speciation in geologically complex materials such as minerals, glasses, soils, organic compounds, industrial slags, and extraterrestrial materials. This technique allows non-destructive investigation of the coordination chemistry and oxidation state of sulfur species ranging from sulfide (2–oxidation state) to sulfate (6+ oxidation state). Each sulfur species has a unique spectral shape with a characteristic K-edge representing the s → p and d hybridization photoelectron transitions. As such, sulfur speciation is used to measure the oxidation state of samples by comparing the overall XANES spectra to that of reference compounds. Although many S XANES spectral standards exist for terrestrial applications under oxidized conditions, new sulfide standards are needed to investigate reduced (oxygen fugacity, fO2, below IW) silicate systems relevant for studies of extraterrestrial materials and systems. Sulfides found in certain meteorites (e.g., enstatite chondrites and aubrites) and predicted to exist on Mercury, such as CaS (oldhamite), MgS (niningerite), and FeCr2S4 (daubréelite), are stable at fO2 below IW-3 but rapidly oxidize to sulfate and/or produce sulfurous gases under terrestrial surface conditions. XANES spectra of these compounds collected to date have been of variable quality, possibly due to the unstable nature of certain sulfides under typical (e.g., oxidizing) laboratory conditions. A new set of compounds was prepared for this study and their XANES spectra are analyzed for comparison with potential extraterrestrial analogs. S K-edge XANES spectra were collected at Argonne National Lab for FeS (troilite), MnS (alabandite), CaS (oldhamite), MgS (niningerite), Ni1–xS, NiS2, CaSO4 (anhydrite), MgSO4, FeSO4, Fe2(SO4)3, FeCr2S4 (daubréelite), Na2S, Al2S3, Ni7S6, and Ni3S2; the latter five were analyzed for the first time using XANES. These standards expand upon the existing S XANES end-member libraries at a higher spectral resolution (0.25 eV steps) near the S K-edge. Processed spectra, those that have been normalized and “flattened,” are compared to quantify uncertainties due to data processing methods. Future investigations that require well-characterized sulfide standards, such as the ones presented here, may have important implications for understanding sulfur speciation in reduced silicate glasses and minerals with applications for the early Earth, Moon, Mercury, and enstatite chondrites.