Daniel Rosas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Daniel Rosas has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Harry Alvarez-Ospina
Universidad Nacional Autónoma de México
10 shared publications - Luis Antonio Ladino
Institute for Atmospheric Sciences and Climate Change, Universidad Nacional Autónoma de México (UNAM), Mexico City, Mexico
10 shared publications - Graciela B. Raga
Instituto de Ciencias de la Atmósfera y Cambio Climático, Universidad Nacional Autónoma de México, Ciudad de México, C.P. 04510, México
9 shared publications Javier Miranda
7 shared publications- Darrel Baumgardner
Droplet Measurement Technologies, LLC, Longmont, USA
6 shared publications Jacqueline Yakobi-Hancock
Department of Community Health and Epidemiology, Dalhousie University, Halifax, NS, Canada
6 shared publications
Latest Publications
- 18 November 2026
- Published by Springer Nature in Journal of Soils and Sediments
- Vol. 26 (12)
Arbuscular mycorrhizal fungi tolerate high concentrations of ZnO nanoparticles and alleviate phytotoxicity in wild cotton
- 18 November 2026
- Published by Springer Nature in Journal of Soils and Sediments
- Vol. 26 (12)
Arbuscular mycorrhizal fungi tolerate high concentrations of ZnO nanoparticles and alleviate phytotoxicity in wild cotton
- Open Access
- 18 September 2026
- Published by Elsevier in SSRN Electronic Journal
Soil to atmosphere transfer of microplastics in the Yucatán Peninsula, Mexico: Resuspension, aerodynamic fractions, and regional transport potential
Microplastics (MPs) occurrence in the atmosphere has been reported in various regions, but the role of soils as a secondary source and the fraction of soil MPs that can be resuspended in the atmosphere are not well characterized yet. This study evaluates the abundance, morphology, size, spatial distribution, and polymer composition of MPs released from surface soils of the Yucatán Peninsula, Mexico, under controlled airflow, and examines their potential regional atmospheric transport. It was found that MPs abundance increased with airflow across the different size fractions at the 14 sites: Total suspended particles, TSP (8.46 ± 0.77 to 13.86 ± 1.47 MPs g⁻¹), PM10 (7.54 ± 0.77 to 10.18 ± 1.07 MPs g⁻¹), and PM2.5 (5.93 ± 0.43 to 8.00 ± 0.66 MPs g⁻¹) (6 to 28 L min⁻¹). Across all flow-fraction combinations, combined fibers and fragments represented >97% of MPs, while pellets were <3%. FT-IR (Fourier Transform Infrared) characterization of the 209 selected resuspended particles identified 11 polymer types, the most frequent of which in the characterized subset were PE (polyethylene), EPDM (Ethylene Propylene Diene Monomer), NBR (acrylonitrile butadiene rubber), PA (polyamide), PU (polyurethane), and PP (polypropylene). Spatial patterns exhibit significant heterogeneity across sites, including the presence of MPs in remote reference locations. The results suggest that soils of the Yucatán Peninsula can act as reservoirs from which MPs are resuspended as a function of wind speed. Our results suggest that the MPs from the Yucatán Peninsula can be transported hundreds of kilometers towards coastal cities in the Gulf of Mexico, supporting the relevance of soil-atmosphere transfer in regional plastic pollution.
- 18 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSoil to atmosphere transfer of microplastics in the Yucatán Peninsula, Mexico: Resuspension, aerodynamic fractions, and regional transport potential
Microplastics (MPs) occurrence in the atmosphere has been reported in various regions, but the role of soils as a secondary source and the fraction of soil MPs that can be resuspended in the atmosphere are not well characterized yet. This study evaluates the abundance, morphology, size, spatial distribution, and polymer composition of MPs released from surface soils of the Yucatán Peninsula, Mexico, under controlled airflow, and examines their potential regional atmospheric transport. It was found that MPs abundance increased with airflow across the different size fractions at the 14 sites: Total suspended particles, TSP (8.46 ± 0.77 to 13.86 ± 1.47 MPs g⁻¹), PM10 (7.54 ± 0.77 to 10.18 ± 1.07 MPs g⁻¹), and PM2.5 (5.93 ± 0.43 to 8.00 ± 0.66 MPs g⁻¹) (6 to 28 L min⁻¹). Across all flow-fraction combinations, combined fibers and fragments represented >97% of MPs, while pellets were <3%. FT-IR (Fourier Transform Infrared) characterization of the 209 selected resuspended particles identified 11 polymer types, the most frequent of which in the characterized subset were PE (polyethylene), EPDM (Ethylene Propylene Diene Monomer), NBR (acrylonitrile butadiene rubber), PA (polyamide), PU (polyurethane), and PP (polypropylene). Spatial patterns exhibit significant heterogeneity across sites, including the presence of MPs in remote reference locations. The results suggest that soils of the Yucatán Peninsula can act as reservoirs from which MPs are resuspended as a function of wind speed. Our results suggest that the MPs from the Yucatán Peninsula can be transported hundreds of kilometers towards coastal cities in the Gulf of Mexico, supporting the relevance of soil-atmosphere transfer in regional plastic pollution.
- Open Access
- 6 February 2025
- Published by Elsevier in Atmospheric Environment
- Vol. 347
African dust particles over the western Caribbean: Chemical characterization
- 6 February 2025
- Published by Elsevier in Atmospheric Environment
- Vol. 347
Open AccessAfrican dust particles over the western Caribbean: Chemical characterization
- Open Access
- 19 May 2022
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 22 (10) , 6435-6447
Mexican agricultural soil dust as a source of ice nucleating particles
Agricultural soil erosion, both mechanical and eolic, may impact cloud processes, as some aerosol particles are able to facilitate ice crystal formation. Given the large agricultural sector in Mexico, this study investigates the ice nucleating abilities of agricultural dust collected at different sites and generated in the laboratory. The immersion freezing mechanism of ice nucleation was simulated in the laboratory via the Universidad Nacional Autónoma de México (UNAM) microorifice uniform deposit impactor (MOUDI) droplet freezing technique (DFT), i.e., UNAM-MOUDI-DFT. The results show that agricultural dust from the Mexican territory promote ice formation in the temperature range from −11.8 to −34.5 ∘C, with ice nucleating particle (INP) concentrations between 0.11 and 41.8 L−1. Furthermore, aerosol samples generated in the laboratory are more efficient than those collected in the field, with T50 values (i.e., the temperature at which 50 % of the droplets freeze) higher by more than 2.9 ∘C. Mineralogical analysis indicated a high concentration of feldspars, i.e., K-feldspar and plagioclase (>40 %), in most of the aerosol and soil samples, with K-feldspar significantly correlated with the T50 of particles with aerodynamic diameters between 1.8 and 3.2 µm. Similarly, the organic carbon (OC) was correlated with the ice nucleation efficiency of aerosol samples from 3.2 to 5.6 and from 1.0 to 1.8 µm. Finally, a decrease in INP efficiency after heating the samples at 300 ∘C for 2 h indicates that the organic matter from agricultural soils plays a predominant role in the ice nucleating abilities of this type of aerosol sample.
- 19 May 2022
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 22 (10) , 6435-6447
Open AccessMexican agricultural soil dust as a source of ice nucleating particles
Agricultural soil erosion, both mechanical and eolic, may impact cloud processes, as some aerosol particles are able to facilitate ice crystal formation. Given the large agricultural sector in Mexico, this study investigates the ice nucleating abilities of agricultural dust collected at different sites and generated in the laboratory. The immersion freezing mechanism of ice nucleation was simulated in the laboratory via the Universidad Nacional Autónoma de México (UNAM) microorifice uniform deposit impactor (MOUDI) droplet freezing technique (DFT), i.e., UNAM-MOUDI-DFT. The results show that agricultural dust from the Mexican territory promote ice formation in the temperature range from −11.8 to −34.5 ∘C, with ice nucleating particle (INP) concentrations between 0.11 and 41.8 L−1. Furthermore, aerosol samples generated in the laboratory are more efficient than those collected in the field, with T50 values (i.e., the temperature at which 50 % of the droplets freeze) higher by more than 2.9 ∘C. Mineralogical analysis indicated a high concentration of feldspars, i.e., K-feldspar and plagioclase (>40 %), in most of the aerosol and soil samples, with K-feldspar significantly correlated with the T50 of particles with aerodynamic diameters between 1.8 and 3.2 µm. Similarly, the organic carbon (OC) was correlated with the ice nucleation efficiency of aerosol samples from 3.2 to 5.6 and from 1.0 to 1.8 µm. Finally, a decrease in INP efficiency after heating the samples at 300 ∘C for 2 h indicates that the organic matter from agricultural soils plays a predominant role in the ice nucleating abilities of this type of aerosol sample.
- Open Access
- 23 December 2021
- Published by Copernicus GmbH in EGUsphere
- Vol. 2021, 1-21
Mexican agricultural soil dust as a source of ice nucleating particles
Agricultural soil erosion, both mechanical and eolic, may impact cloud processes as some aerosol particles are able to facilitate ice crystals formation. Given the large agricultural sector in Mexico, this study investigates the ice nucleating abilities of agricultural dust collected at different sites and generated in the laboratory. The immersion freezing mechanism of ice nucleation was simulated in the laboratory via the Universidad Nacional Autónoma de México (UNAM)- Micro Orifice Uniform Deposit Impactor (MOUDI)-Droplet freezing technique (DFT) (UNAM-MOUDI-DFT). The results show that agricultural dust from the Mexican territory promote ice formation in a temperature range from −11.8 ºC to −34.5 ºC, with ice nucleating particle (INP) concentrations between 0.11 L−1 and 41.8 L−1. Furthermore, aerosol samples generated in the laboratory are more efficient than those collected in the field, with T50 values (i.e., the temperature at which 50 % of the droplets freeze) higher by more than 2.9 ºC. The mineralogical analysis indicated a high concentration of feldspars i.e., K-feldspar and plagioclase (> 40 %) in most of the aerosol and soil samples, with K-feldspar significantly correlated with the T50 of particles with sizes between 1.8 µm and 3.2 µm. Similarly, the organic carbon (OC) was correlated with the efficiency of aerosol samples from 3.2 µm to 5.6 µm and 1.0 µm to 1.8 µm. Finally, a decrease in the efficiency as INPs, after heating the samples at 300 ºC for 2 h, evidenced that the organic matter from agricultural soils can influence the role of INPs in mixed-phase clouds.
- 23 December 2021
- Published by Copernicus GmbH in EGUsphere
- Vol. 2021, 1-21
Open AccessMexican agricultural soil dust as a source of ice nucleating particles
Agricultural soil erosion, both mechanical and eolic, may impact cloud processes as some aerosol particles are able to facilitate ice crystals formation. Given the large agricultural sector in Mexico, this study investigates the ice nucleating abilities of agricultural dust collected at different sites and generated in the laboratory. The immersion freezing mechanism of ice nucleation was simulated in the laboratory via the Universidad Nacional Autónoma de México (UNAM)- Micro Orifice Uniform Deposit Impactor (MOUDI)-Droplet freezing technique (DFT) (UNAM-MOUDI-DFT). The results show that agricultural dust from the Mexican territory promote ice formation in a temperature range from −11.8 ºC to −34.5 ºC, with ice nucleating particle (INP) concentrations between 0.11 L−1 and 41.8 L−1. Furthermore, aerosol samples generated in the laboratory are more efficient than those collected in the field, with T50 values (i.e., the temperature at which 50 % of the droplets freeze) higher by more than 2.9 ºC. The mineralogical analysis indicated a high concentration of feldspars i.e., K-feldspar and plagioclase (> 40 %) in most of the aerosol and soil samples, with K-feldspar significantly correlated with the T50 of particles with sizes between 1.8 µm and 3.2 µm. Similarly, the organic carbon (OC) was correlated with the efficiency of aerosol samples from 3.2 µm to 5.6 µm and 1.0 µm to 1.8 µm. Finally, a decrease in the efficiency as INPs, after heating the samples at 300 ºC for 2 h, evidenced that the organic matter from agricultural soils can influence the role of INPs in mixed-phase clouds.
- Open Access
- 23 December 2021
- Published by Copernicus GmbH
Supplementary material to "Mexican agricultural soil dust as a source of ice nucleating particles"
- 23 December 2021
- Published by Copernicus GmbH
Open AccessSupplementary material to "Mexican agricultural soil dust as a source of ice nucleating particles"
- Open Access
- 23 March 2021
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 21 (6) , 4453-4470
Measurement report: Ice nucleating abilities of biomass burning, African dust, and sea spray aerosol particles over the Yucatán Peninsula
Most precipitation from deep clouds over the continents and in the intertropical convergence zone is strongly influenced by the presence of ice crystals whose formation requires the presence of ice nucleating particles (INPs). Although there are a large number of INP sources, the ice nucleating abilities of aerosol particles originating from oceans, deserts, and wildfires are poorly described at tropical latitudes. To fill this gap in knowledge, the National Autonomous University of Mexico micro-orifice uniform deposit impactor droplet freezing technique (UNAM-MOUDI-DFT) was constructed to measure the ice nucleating activity of aerosol samples that were collected in Sisal and Mérida, Yucatán (Mexico) under the influence of cold fronts, biomass burning (BB), and African dust (AD) intrusions during five short-term field campaigns between January 2017 and July 2018. The three different aerosol types were distinguished by their physicochemical properties. Marine aerosol (MA), BB, and AD air masses were found to contain INPs; the highest concentrations were in AD (from 0.071 to 36.07 L−1 at temperatures between −18 and −27 ∘C), followed by MA (from 0.068 to 18.90 L−1 at temperatures between −15 and −28 ∘C) and BB (from 0.063 to 10.21 L−1 at temperatures between −20 and −27 ∘C). However, MA had the highest surface active site densities (ns) between −15 and −30 ∘C. Additionally, supermicron particles contributed more than 72 % of the total INP concentration independent of aerosol type.
- 23 March 2021
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 21 (6) , 4453-4470
Open AccessMeasurement report: Ice nucleating abilities of biomass burning, African dust, and sea spray aerosol particles over the Yucatán Peninsula
Most precipitation from deep clouds over the continents and in the intertropical convergence zone is strongly influenced by the presence of ice crystals whose formation requires the presence of ice nucleating particles (INPs). Although there are a large number of INP sources, the ice nucleating abilities of aerosol particles originating from oceans, deserts, and wildfires are poorly described at tropical latitudes. To fill this gap in knowledge, the National Autonomous University of Mexico micro-orifice uniform deposit impactor droplet freezing technique (UNAM-MOUDI-DFT) was constructed to measure the ice nucleating activity of aerosol samples that were collected in Sisal and Mérida, Yucatán (Mexico) under the influence of cold fronts, biomass burning (BB), and African dust (AD) intrusions during five short-term field campaigns between January 2017 and July 2018. The three different aerosol types were distinguished by their physicochemical properties. Marine aerosol (MA), BB, and AD air masses were found to contain INPs; the highest concentrations were in AD (from 0.071 to 36.07 L−1 at temperatures between −18 and −27 ∘C), followed by MA (from 0.068 to 18.90 L−1 at temperatures between −15 and −28 ∘C) and BB (from 0.063 to 10.21 L−1 at temperatures between −20 and −27 ∘C). However, MA had the highest surface active site densities (ns) between −15 and −30 ∘C. Additionally, supermicron particles contributed more than 72 % of the total INP concentration independent of aerosol type.
- Open Access
- 12 January 2021
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 21 (1) , 239-253
African dust particles over the western Caribbean – Part I: Impact on air quality over the Yucatán Peninsula
On a global scale, African dust is known to be one of the major sources of mineral dust particles, as these particles can be efficiently transported to different parts of the planet. Several studies have suggested that the Yucatán Peninsula could be influenced by such particles, especially in July, associated with the strengthening of the Caribbean low-level jet. Although these particles have the potential to significantly impact the local air quality, as shown elsewhere (especially with respect to particulate matter, PM), the arrival and impact of African dust in Mexican territory has not been quantitatively reported to date. Two short-term field campaigns were conducted to confirm the arrival of African dust on the Yucatán Peninsula in July 2017 and July 2018 at the Mérida atmospheric observatory (20.98∘ N, 89.64∘ W). Aerosol particles were monitored at ground level using different online and off-line sensors. Several PM2.5 and PM10 peaks were observed during both sampling periods, with a relative increase in the PM levels ranging between 200 % and 500 % with respect to the normal background conditions. Given that these peaks were found to be highly correlated with supermicron particles and chemical elements typically found in mineral dust particles, such as Al, Fe, Si, and K, they are linked with African dust. This conclusion is supported by combining back trajectories with vertical profiles from radiosondes, reanalysis, and satellite images to show that the origin of the air masses arriving at Mérida was the Saharan Air Layer (SAL). The good agreement found between the measured PM10 concentrations and the estimated dust mixing ratio content from MERRA-2 (Version 2 of the Modern-Era Retrospective analysis for Research and Applications) corroborates the conclusion that the degradation of the local (and likely regional) air quality in Mérida is a result of the arrival of African dust.
- 12 January 2021
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 21 (1) , 239-253
Open AccessAfrican dust particles over the western Caribbean – Part I: Impact on air quality over the Yucatán Peninsula
On a global scale, African dust is known to be one of the major sources of mineral dust particles, as these particles can be efficiently transported to different parts of the planet. Several studies have suggested that the Yucatán Peninsula could be influenced by such particles, especially in July, associated with the strengthening of the Caribbean low-level jet. Although these particles have the potential to significantly impact the local air quality, as shown elsewhere (especially with respect to particulate matter, PM), the arrival and impact of African dust in Mexican territory has not been quantitatively reported to date. Two short-term field campaigns were conducted to confirm the arrival of African dust on the Yucatán Peninsula in July 2017 and July 2018 at the Mérida atmospheric observatory (20.98∘ N, 89.64∘ W). Aerosol particles were monitored at ground level using different online and off-line sensors. Several PM2.5 and PM10 peaks were observed during both sampling periods, with a relative increase in the PM levels ranging between 200 % and 500 % with respect to the normal background conditions. Given that these peaks were found to be highly correlated with supermicron particles and chemical elements typically found in mineral dust particles, such as Al, Fe, Si, and K, they are linked with African dust. This conclusion is supported by combining back trajectories with vertical profiles from radiosondes, reanalysis, and satellite images to show that the origin of the air masses arriving at Mérida was the Saharan Air Layer (SAL). The good agreement found between the measured PM10 concentrations and the estimated dust mixing ratio content from MERRA-2 (Version 2 of the Modern-Era Retrospective analysis for Research and Applications) corroborates the conclusion that the degradation of the local (and likely regional) air quality in Mérida is a result of the arrival of African dust.