MLMengfei Li

Mengfei Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mengfei Li has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Unique stratification of biofilm density in heterotrophic membrane-aerated biofilms: An experimental and modeling study

    by Mengfei Li, Patricia Perez-Calleja, Bumkyu Kim, Cristian Picioreanu, Robert Nerenberg


  • Effects of biofilm heterogeneity on the apparent mechanical properties obtained by shear rheometry

    by Mengfei Li, Yanina Nahum, Karel Matouš, Paul Stoodley, Robert Nerenberg

    Rheometry is an experimental technique widely used to determine the mechanical properties of biofilms. However, it characterizes the bulk mechanical behavior of the whole biofilm. The effects of biofilm mechanical heterogeneity on rheometry measurements are not known. We used laboratory experiments and computer modeling to explore the effects of biofilm mechanical heterogeneity on the results obtained by rheometry. A synthetic biofilm with layered mechanical properties was studied, and a viscoelastic biofilm theory was employed using the Kelvin–Voigt model. Agar gels with different concentrations were used to prepare the layered, heterogeneous biofilm, which was characterized for mechanical properties in shear mode with a rheometer. Both experiments and simulations indicated that the biofilm properties from rheometry were strongly biased by the weakest portion of the biofilm. The simulation results using linearly stratified mechanical properties from a previous study also showed that the weaker portions of the biofilm dominated the mechanical properties in creep tests. We note that the model can be used as a predictive tool to explore the mechanical behavior of complex biofilm structures beyond those accessible to experiments. Since most biofilms display some degree of mechanical heterogeneity, our results suggest caution should be used in the interpretation of rheometry data. It does not necessarily provide the “average” mechanical properties of the entire biofilm if the mechanical properties are stratified.


  • Data‐driven modeling of heterogeneous viscoelastic biofilms

    by Mengfei Li, Karel Matouš, Robert Nerenberg

    Biofilms are typically heterogeneous in morphology, structure, and composition, resulting in nonuniform mechanical properties. The distribution of mechanical properties, in turn, determines the biofilm behavior, such as deformation and detachment. Most biofilm models neglect biofilm heterogeneity, especially at the microscale. In this study, an image‐based modeling approach was developed to transform two‐dimensional optical coherence tomography (OCT) biofilm images to a pixel‐scale non‐Newtonian viscosity map of the biofilm. The map was calibrated using the bulk viscosity data from rheometer tests, based on assumed maximum and minimum viscosities and a relationship between OCT image intensity signals and non‐Newtonian viscosity. While not quantitatively measuring biofilm viscosity for each pixel, it allows a rational spatial allocation of viscosities within the biofilm: areas with lower cell density, for example, voids, are assigned lower viscosities, and areas with high cell densities are assigned higher viscosities. The spatial distribution of non‐Newtonian viscosity was applied in an established Oldroyd‐B constitutive model and implemented using the phase‐field continuum approach for the deformation and stress analysis. The heterogeneous model was able to predict deformations more accurately than a homogenous one. Stress distribution in the heterogeneous biofilm displayed better characteristics than that in the homogeneous one, because it is highly dependent on the viscosity distribution. This study, using a pixel‐scale, image‐based approach to map the mechanical heterogeneity of biofilms for computational deformation and stress analysis, provides a novel modeling approach that allows the consideration of biofilm structural and mechanical heterogeneity. Future research should better characterize the relationship between OCT signal and viscosity, and consider other constitutive models for biofilm mechanical behavior.


  • Open Access

    Data-driven modeling of heterogeneous viscoelastic biofilms

    by Mengfei Li, Karel Matouš, Robert Nerenberg

    Biofilms are typically heterogeneous in morphology, structure, and composition, resulting in non-uniform mechanical properties. The distribution of mechanical properties, in turn, determines the biofilm mechanical behavior, such as deformation and detachment. Most past studies neglected heterogeneity of biofilms. In this study, an image-based modeling approach was developed to transform two-dimensional optical coherence tomography biofilm images to a pixel-scale non-Newtonian viscosity map of the biofilm. The spatial distribution of non-Newtonian viscosity was applied in an established Oldroyd-B constitutive model and implemented using the phase-field continuum approach for the deformation and stress analysis. The heterogeneous model was able to predict deformations and stresses more accurately than a homogenous one. This is the first time, to the best of our knowledge, that an image-based approach is used to map the mechanical heterogeneity of biofilms for computational studies. It provides an efficient method to characterize biofilm mechanical behavior.

  • Spatial distribution of mechanical properties in Pseudomonas aeruginosa biofilms, and their potential impacts on biofilm deformation

    by Juan P. Pavissich, Mengfei Li, Robert Nerenberg

    The mechanical properties of biofilms can be used to predict biofilm deformation under external forces, for example, under fluid flow. We used magnetic tweezers to spatially map the compliance of Pseudomonas aeruginosa biofilms at the microscale, then applied modeling to assess its effects on biofilm deformation. Biofilms were grown in capillary flow cells with Reynolds numbers (Re) ranging from 0.28 to 13.9, bulk dissolved oxygen (DO) concentrations from 1 mg/L to 8 mg/L, and bulk calcium ion (Ca2+) concentrations of 0 and 100 mg CaCl2/L. Higher Re numbers resulted in more uniform biofilm morphologies. The biofilm was stiffer at the center of the flow cell than near the walls. Lower bulk DO led to more stratified biofilms. Higher Ca2+ concentrations led to increased stiffness and more uniform mechanical properties. Using the experimental mechanical properties, fluid–structure interaction models predicted up to 64% greater deformation for heterogeneous biofilms, compared with a homogeneous biofilms with the same average properties. However, the deviation depended on the biofilm morphology and flow regime. Our results show significant spatial mechanical variability exists at the microscale, and that this variability can potentially affect biofilm deformation. The average biofilm mechanical properties, provided in many studies, should be used with caution when predicting biofilm deformation.


  • Open Access

    Spatial distribution of mechanical properties in Pseudomonas aeruginosa biofilms, and their potential impacts on biofilm deformation

    by Juan Pablo Pavissich, Mengfei Li, Robert Nerenberg

    The mechanical properties of biofilms can be used to predict biofilm deformation, for example under fluid flow. We used magnetic tweezers to spatially map the compliance of Pseudomonas aeruginosa biofilms at the micron scale, then used modeling to assess its effects on biofilm deformation. Biofilms were grown in capillary flow cells with Reynolds numbers (Re) ranging 0.28 to 13.9, bulk dissolved oxygen (DO) concentrations from 1 mg/L to 8 mg/L, and bulk calcium ion (Ca 2+ ) concentrations of 0 and 100 mg CaCl 2 /L. Higher Re numbers resulted in more uniform biofilm morphologies. The biofilm was stiffer at the center of the flow cell than near the walls. Lower bulk DO led to more stratified biofilms. Higher Ca 2+ led to increased stiffness and more uniform mechanical properties. Using the experimental mechanical properties, fluid-structure interaction models predicted up to 64% greater deformations for heterogeneous biofilms, compared to a homogeneous biofilms with the same average properties. However, the error depended on the biofilm morphology and flow regime. Our results show significant spatial mechanical variability exists at the micron scale, and that this variability can potentially affect biofilm deformation. The average mechanical properties, provided in many studies, should be used with caution when predicting biofilm deformation.


  • Predicting biofilm deformation with a viscoelastic phase‐field model: Modeling and experimental studies

    by Mengfei Li, Karel Matouš, Robert Nerenberg

    Biofilms commonly develop in flowing aqueous environments, where the flow causes the biofilm to deform. Because biofilm deformation affects the flow regime, and because biofilms behave as complex heterogeneous viscoelastic materials, few models are able to predict biofilm deformation. In this study, a phase‐field (PF) continuum model coupled with the Oldroyd‐B constitutive equation was developed and used to simulate biofilm deformation. The accuracy of the model was evaluated using two types of biofilms: a synthetic biofilm, made from alginate mixed with bacterial cells, and a Pseudomonas aeruginosa biofilm. Shear rheometry was used to experimentally determine the mechanical parameters for each biofilm, used as inputs for the model. Biofilm deformation under fluid flow was monitored experimentally using optical coherence tomography. The comparison between the experimental and modeling geometries, for selected horizontal cross sections, after fluid‐driven deformation was good. The relative errors ranged from 3.2 to 21.1% for the synthetic biofilm and from 9.1 to 11.1% for the P. aeruginosa biofilm. This is the first demonstration of the effectiveness of a viscoelastic PF biofilm model. This model provides an important tool for predicting biofilm viscoelastic deformation. It also can benefit the design and control of biofilms in engineering systems.


  • Open Access

    Predicting biofilm deformation with a viscoelastic phase field model: modeling and experimental studies

    by Mengfei Li, Karel Matouš, Robert Nerenberg

    Biofilms commonly develop in flowing aqueous environments, where the flow causes the biofilm to deform. Because biofilm deformation affects the flow regime, and because biofilms behave as complex heterogeneous viscoelastic materials, few models are able to predict biofilm deformation. In this study, a phase field continuum model coupled with the Oldroyd-B constitutive equation was developed and used to simulate biofilm deformation. The accuracy of the model was evaluated using two types of biofilms: a synthetic biofilm, made from alginate mixed with bacterial cells, and a Pseudomonas aeruginosa biofilm. Shear rheometry was used to experimentally determine the mechanical parameters for each biofilm, as inputs for the model. Biofilm deformation under fluid flow was monitored experimentally using optical coherence tomography. The fit between the experimental and modeling geometries after fluid-driven deformation was very good, with relative errors of 12.8% for synthetic biofilm and 22.2% for homogenized P. aeruginosa biofilm. This is the first demonstration of the effectiveness of a viscoelastic phase field biofilm model. This model provides an important tool for predicting biofilm viscoelastic deformation. It also can benefit the design and control of biofilms in engineering systems.