Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Isaac Lorero has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Novel Recycling of Epoxy Thermosets by Blending with Reversible Diels–Alder Epoxy Resin

    by Isaac Lorero, Blanca Rico, Mónica Campo, Silvia G. Prolongo

    The introduction of Diels–Alder (D-A) bonds into epoxy resins is a promising pathway to convert these unrecyclable materials into sustainable materials. However, D-A bonds make epoxy resins extremely brittle materials and hinder their practical usability. Nonetheless, the reversibility of D-A bonds allows the transition of the material to a de-crosslinked network formed by separated oligomers that can melt above 90–100 °C. This means that D-A epoxy resins can be reprocessed after being cured like thermoplastics. In the present work, a thermoset blend is made by adding spent epoxy particles to a D-A epoxy resin to increase its thermal and mechanical properties and to evaluate a possible reuse of conventional thermoset wastes. The application of hot-pressing to a mixture of epoxy particles and powder of cured D-A epoxy creates a material in which the interaction of the particles with the D-A resin increases the thermal resistance of the material and prevents the D-A epoxy from melting at high temperatures. In addition, the flexural strength is increased by 80% and the chemical resistance against organic solvents is also improved.


  • Open Access

    Mechanical recycling and electro‐thermal welding of epoxy vitrimer nanocomposites

    by I. Lorero, A. Mujica, M. Campo, S. G. Prolongo

    Vitrimers constitute a new class of recyclable thermosets based on the incorporation of associative dynamic covalent bonds, such as disulfide bonds, into the crosslinked matrix. These reversible bonds usually require excess dynamic bonds to confer proper self‐healing and recycling capabilities to the thermoset. In that way, we manufacture epoxy resins cured with 4‐aminophenyl disulfide (AFD) in a stoichiometric ratio, and with 10 and 20 wt% of AFD excesses to analyze the effect of composition on resin properties. Beyond the neat vitrimers analysis, we manufacture nanocomposites doped with carbon nanotubes (CNT) to obtain electroactive vitrimers. These epoxy resins and nanocomposites can be mechanically recycled by milling and hot‐pressing. The recycled nanocomposites conserve partially CNT integrity and dispersion. Even more, recycled nanocomposites with AFD excesses maintain the mechanical strength of the pristine nanocomposites. Vitrimer nanocomposite samples can be also electrically welded, due to their heating by the Joule effect, through a relatively low voltage application, and therefore with low energy consumption, to obtain a monolithic specimen. In summary, the manufactured epoxy vitrimers and nanocomposites are recyclable and sustainable epoxy materials, which can be processed and reprocessed using technologies easily implementable, fast, and with low energy consumption.Highlights: Electroactive and re‐processable vitrimer nanocomposites are manufactured. Nanocomposite vitrimers show conductivities similar to conventional epoxies. Bond exchanging temperatures can be reached by Joule heating. CNT addition enhances disulfide exchanges and thermo‐mechanical recyclability. Electrothermal welding of vitrimer nanocomposites is successfully tested.


  • Open Access

    Development of an Electroactive and Thermo-Reversible Diels–Alder Epoxy Nanocomposite Doped with Carbon Nanotubes

    by Isaac Lorero, Álvaro Rodríguez, Mónica Campo, Silvia G. Prolongo

    The manufacturing of Diels–Alder (D-A) crosslinked epoxy nanocomposites is an emerging field with several challenges to overcome: the synthesis is complex due to side reactions, the mechanical properties are hindered by the brittleness of these bonds, and the content of carbon nanotubes (CNT) added to achieve electroactivity is much higher than the percolation thresholds of other conventional resins. In this work, we develop nanocomposites with different D-A crosslinking ratios (0, 0.6, and 1.0) and CNT contents (0.1, 0.3, 0.5, 0.7, and 0.9 wt.%), achieving a simplified route and avoiding the use of solvents and side reactions by selecting a two-step curing method (100 °C-6 h + 60 °C-12 h) that generates the thermo-reversible resins. These reversible nanocomposites show ohmic behavior and effective Joule heating, reaching the dissociation temperatures of the D-A bonds. The fully reversible nanocomposites (ratio 1.0) present more homogeneous CNT dispersion compared to the partially reversible nanocomposites (ratio 0.6), showing higher electrical conductivity, as well as higher brittleness. For this study, the nanocomposite with a partially reversible matrix (ratio 0.6) doped with 0.7 CNT wt.% was selected to allow us to study its new smart functionalities and performance due to its reversible network by analyzing self-healing and thermoforming.


  • Open Access

    Epoxy Composites Reinforced with ZnO from Waste Alkaline Batteries

    by Isaac Lorero, Mónica Campo, Carmen Arribas, Margarita Gonzalez Prolongo, Felix Antonio López, Silvia G. Prolongo

    The zinc alkaline battery is one of the most popular sources of portable electrical energy, with more than 300,000 tons being consumed per year. Accordingly, it is critical to recycle its components. In this work, we propose the use of zinc oxide (ZnO) microparticles recovered from worn-out batteries as fillers of epoxy resins. These nanocomposites can be used as protective coatings or pigments and as structural composites with high thermal stability. The addition of ceramic nanofillers, such as ZnO or/and TiO2, could enhance the thermal and mechanical properties, and the hardness and hydrophobicity, of the epoxy resins, depending on several factors. Accordingly, different nanocomposites reinforced with recycled ZnO and commercial ZnO and TiO2 nanoparticles have been manufactured with different nanofiller contents. In addition to the different ceramic oxides, the morphology and size of fillers are different. Recycled ZnO are“desert roses” such as microparticles, commercial ZnO are rectangular parallelepipeds nanoparticles, and commercial TiO2 are smaller spherical nanoparticles. The addition of ceramic fillers produces a small increase of the glass transition temperature (<2%), together with an enhancement of the barrier effect of the epoxy resin, reducing the water diffusion coefficient (<21%), although the maximum water uptake remains constant. The nanocomposite water absorption is fully reversible by subsequent thermal treatment, recovering its initial thermomechanical behavior. The water angle contact (WCA) also increases (~12%) with the presence of ceramic particles, although the highest hydrophobicity (35%) is obtained when the epoxy resin reinforced with recycled flowerlike ZnO microparticles is etched with acid stearic and acetic acid, inducing the corrosion of the ZnO on the surface and therefore the increment of the surface roughness. The presence of desert rose ZnO particles enhances the de lotus effect.


  • Open Access

    Activated Carbon from Winemaking Waste: Thermoeconomic Analysis for Large-Scale Production

    by Isaac Lorero, Arturo J. Vizcaíno, Francisco J. Alguacil, Félix A. López

    An activated carbon manufacturing process from winemaking waste is analyzed. In that way, vine shoots conversion is studied as a basis for plant designing, and mass and energy balances of hydrothermal carbonization and physical activation are fulfilled. To develop an energy-integrated plant, a network of heat exchangers is allocated to recover heat waste, and a cogeneration cycle is designed to provide electricity and remaining heat process demands. Furthermore, thermoeconomic analysis is applied to determine the thermodynamic efficiency and the economic viability of the plant. Energy balance indicates that heat exchangers energy integration covers 48.9% of the overall demands by crossing hot and cold streams and recovering heat from residual flue gas. On the other hand, the exergy costs analysis identifies combustion of pruning wood as the main source of exergy destruction, confirming the suitability of the integration to improve the thermodynamic performance. Attending to economic costs analysis, production scale and vineyard pruning wood price are identified as a critical parameter on process profitability. With a scale of 2.5 ton/h of pruning wood carbonization, a break-event point to compete with activated carbons from biomass origin is reached. Nevertheless, cost of pruning wood is identified as another important economic parameter, pointing out the suitability of wet methods such as hydrothermal carbonization (HTC) to treat them as received form the harvest and to contribute to cutting down its prices.


  • Open Access

    Activated Carbon From Winemaking Waste: Thermoeconomic Analsys for Large-Scale Production

    by Isaac Lorero, Arturo J. Vizcaíno, Francisco J. Alguacil, Félix A. López

    An activated carbon manufacturing process using winemaking waste is analyzed and designed at industrial scale. Starting from experimental research, the chemical transformations and thermodynamics during pruning wood conversion are studied as a basis for plant design. In this way, mass and energy balances of hydrothermal carbonization and physical activation are fulfilled and a thermoeconomic methodology is applied to develop an energy-integrated plant. To achieve this target, a network of heat exchangers is allocated to minimize heat consumption and supply hot domestic water, while a cogeneration cycle is designed to provide electricity and satisfy the remaining heat demand. Furthermore, a sensitivity analysis is carried out to determine the influence of the production scale and other operation parameters, such as annual workload, service life, and capital and feedstock costs, on the economic viability of the plant. The energy balance of the plant indicates that the energy integration design manages to provide 48.9% of the overall process energy demand by crossing hot and cold streams and recovering heat from residual flue gas. On the other hand, the exergy cost analysis identifies the combustion of pruning wood used to provide heat demands as the main source of exergy destruction, confirming the suitability of integration to improve the thermodynamic performance. Including activated carbon production, electricity, and hot domestic water, the exergy efficiency of the plant stands at 11.5%.


  • Open Access

    New Manufacturing Process of Composites Reinforced with ZnO Nanoparticles Recycled from Alkaline Batteries

    by Isaac Lorero, Mónica Campo, Gilberto Del Rosario, Félix Antonio López, Silvia González Prolongo

    A new manufacturing method of thermosetting resins reinforced with dense particles is developed in the present work. A rotary mold is used, avoiding the natural sedimentation of particles through applying centrifuge forces. A deep study of the sedimentation phenomenon is carried out in order to evaluate the main experimental parameters which influence the manufacturing of composite. The used reinforcement is zinc oxide (ZnO) obtained by a new recycling method from spent alkaline batteries. In order to compare the benefits, commercial ZnO nanoparticles are also analyzed. Recycled ZnO particles enhance the interaction of the epoxy matrix due to their inner moisture, allowing the manufacture of composites with relatively high ceramic content. Moreover, an increment in the glass transition temperature of the epoxy matrix and in the mechanical properties, such as its stiffness and hardness, is achieved.