Qianqian Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qianqian Zhu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Qianqian Wang
Jiangsu University
7 shared publications Jun Liu
Biofuels Institute, School of the Environment and Safety Engineering, School of Emergency Management, Jiangsu University, Zhenjiang, 212013, China
5 shared publications- Jianzhong Sun
Biofuels Institute, School of the Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, China
4 shared publications Huan Liu
Biofuels Institute, School of the Environment and Safety Engineering, School of Emergency Management, Jiangsu University, Zhenjiang, 212013, China
3 shared publicationsSimeng Liu
Jiangsu University
3 shared publications- Jun Liu
Biofuels Institute, School of Environment and Safety Engineering, Key Laboratory of Zhenjiang, Jiangsu University, Zhenjiang, 212013, China; International Joint Research Center on High-value Utilization of Agricultural Waste Biomass between Jiangsu University, China, and Mie University, Japan, Zhenjiang, 212013, China
2 shared publications
Latest Publications
- Top Cited Papers
- 5 February 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 347, 150776
Polydopamine-functionalized cellulose nanofibrils with Ag deposition for robust poly(vinyl alcohol) hydrogel strain sensor
- 5 February 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 347, 150776
Top Cited PapersPolydopamine-functionalized cellulose nanofibrils with Ag deposition for robust poly(vinyl alcohol) hydrogel strain sensor
- 16 May 2024
- Published by Springer Nature in Cellulose
- Vol. 31 (9) , 5381-5417
Engineering nanocellulose percolation network for flexible strain sensor
- 16 May 2024
- Published by Springer Nature in Cellulose
- Vol. 31 (9) , 5381-5417
Engineering nanocellulose percolation network for flexible strain sensor
- 25 April 2023
- Published by BioResources in BioResources
- Vol. 18 (2) , 4104-4115
Carboxylated cellulose silica hybrid beads for efficient dye removal
Highly efficient and environmentally friendly carboxylated cellulose silica hybrid adsorbents were prepared by combining the advantages of cellulose and silica. The surface property and chemical composition of produced cellulose silica hybrid adsorbents were extensively characterized via different techniques. The results indicated that silica particles were densely deposited on the surface of composite adsorbents. Because of their porous structure and large specific surface area, the carboxylated cellulose silica hybrid adsorbents demonstrated a high capacity of methylene blue (MB) adsorption, exceeding 990 mg·g-1. This adsorption capacity was more than 45% higher than that of carboxylated cellulose adsorbent. The cellulose silica hybrid adsorbents were able to maintain an MB adsorption efficiency of up to 70% even after undergoing five cycles. This study developed cellulose silica hybrid adsorbents for wastewater treatments. High adsorption capacity and stability make them sustainable and cost-effective alternatives to traditional adsorbents.
- 25 April 2023
- Published by BioResources in BioResources
- Vol. 18 (2) , 4104-4115
Carboxylated cellulose silica hybrid beads for efficient dye removal
Highly efficient and environmentally friendly carboxylated cellulose silica hybrid adsorbents were prepared by combining the advantages of cellulose and silica. The surface property and chemical composition of produced cellulose silica hybrid adsorbents were extensively characterized via different techniques. The results indicated that silica particles were densely deposited on the surface of composite adsorbents. Because of their porous structure and large specific surface area, the carboxylated cellulose silica hybrid adsorbents demonstrated a high capacity of methylene blue (MB) adsorption, exceeding 990 mg·g-1. This adsorption capacity was more than 45% higher than that of carboxylated cellulose adsorbent. The cellulose silica hybrid adsorbents were able to maintain an MB adsorption efficiency of up to 70% even after undergoing five cycles. This study developed cellulose silica hybrid adsorbents for wastewater treatments. High adsorption capacity and stability make them sustainable and cost-effective alternatives to traditional adsorbents.
- 19 April 2022
- Published by Springer Nature in Cellulose
- Vol. 29 (8) , 4287-4321
Templated synthesis and assembly with sustainable cellulose nanomaterial for functional nanostructure
- 19 April 2022
- Published by Springer Nature in Cellulose
- Vol. 29 (8) , 4287-4321
Templated synthesis and assembly with sustainable cellulose nanomaterial for functional nanostructure
- 14 February 2022
- Published by Elsevier in Carbohydrate Polymers
- Vol. 285, 119251
Sustainable cellulose nanomaterials for environmental remediation - Achieving clean air, water, and energy: A review
- 14 February 2022
- Published by Elsevier in Carbohydrate Polymers
- Vol. 285, 119251
Sustainable cellulose nanomaterials for environmental remediation - Achieving clean air, water, and energy: A review
- Open Access
- 20 May 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (5) , 1353
Recent Progress on the Characterization of Cellulose Nanomaterials by Nanoscale Infrared Spectroscopy
Researches of cellulose nanomaterials have seen nearly exponential growth over the past several decades for versatile applications. The characterization of nanostructural arrangement and local chemical distribution is critical to understand their role when developing cellulose materials. However, with the development of current characterization methods, the simultaneous morphological and chemical characterization of cellulose materials at nanoscale resolution is still challenging. Two fundamentally different nanoscale infrared spectroscopic techniques, namely atomic force microscope based infrared spectroscopy (AFM-IR) and infrared scattering scanning near field optical microscopy (IR s-SNOM), have been established by the integration of AFM with IR spectroscopy to realize nanoscale spatially resolved imaging for both morphological and chemical information. This review aims to summarize and highlight the recent developments in the applications of current state-of-the-art nanoscale IR spectroscopy and imaging to cellulose materials. It briefly outlines the basic principles of AFM-IR and IR s-SNOM, as well as their advantages and limitations to characterize cellulose materials. The uses of AFM-IR and IR s-SNOM for the understanding and development of cellulose materials, including cellulose nanomaterials, cellulose nanocomposites, and plant cell walls, are extensively summarized and discussed. The prospects of future developments in cellulose materials characterization are provided in the final part.
- 20 May 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (5) , 1353
Open AccessRecent Progress on the Characterization of Cellulose Nanomaterials by Nanoscale Infrared Spectroscopy
Researches of cellulose nanomaterials have seen nearly exponential growth over the past several decades for versatile applications. The characterization of nanostructural arrangement and local chemical distribution is critical to understand their role when developing cellulose materials. However, with the development of current characterization methods, the simultaneous morphological and chemical characterization of cellulose materials at nanoscale resolution is still challenging. Two fundamentally different nanoscale infrared spectroscopic techniques, namely atomic force microscope based infrared spectroscopy (AFM-IR) and infrared scattering scanning near field optical microscopy (IR s-SNOM), have been established by the integration of AFM with IR spectroscopy to realize nanoscale spatially resolved imaging for both morphological and chemical information. This review aims to summarize and highlight the recent developments in the applications of current state-of-the-art nanoscale IR spectroscopy and imaging to cellulose materials. It briefly outlines the basic principles of AFM-IR and IR s-SNOM, as well as their advantages and limitations to characterize cellulose materials. The uses of AFM-IR and IR s-SNOM for the understanding and development of cellulose materials, including cellulose nanomaterials, cellulose nanocomposites, and plant cell walls, are extensively summarized and discussed. The prospects of future developments in cellulose materials characterization are provided in the final part.
- Open Access
Structure and Properties of Polylactic Acid Biocomposite Films Reinforced with Cellulose Nanofibrils
Polylactic acid (PLA) is one of the most promising biodegradable and recyclable thermoplastic biopolymer derived from renewable feedstock. Nanocellulose reinforced PLA biocomposites have received increasing attention in academic and industrial communities. In the present study, cellulose nanofibrils (CNFs) was liberated by combined enzymatic pretreatment and high-pressure homogenization, and then subsequently incorporated into the PLA matrix to synthesize PLA/CNF biocomposite films via solution casting and melt compression. The prepared PLA/CNF biocomposite films were characterized in terms of transparency (UV-Vis spectroscopy), chemical structure (attenuated total reflectance-Fourier transform infrared, ATR-FTIR; X-ray powder diffraction, XRD), thermal (thermogravimetric analyzer, TGA; differential scanning calorimetry, DSC), and tensile properties. With 1.0–5.0 wt % additions of CNF to the PLA matrix, noticeable improvements in thermal and physical properties were observed for the resulting PLA/CNF biocomposites. The 2.5 wt % addition of CNF increased the tensile strength by 8.8%. The Tonset (initial degradation temperature) and Tmax (maximum degradation temperature) after adding 5.0 wt % CNF was increased by 20 °C, and 10 °C, respectively in the nitrogen atmosphere. These improvements were attributed to the good dispersibility and improved interfacial interaction of CNF in the PLA matrix.
Open AccessStructure and Properties of Polylactic Acid Biocomposite Films Reinforced with Cellulose Nanofibrils
Polylactic acid (PLA) is one of the most promising biodegradable and recyclable thermoplastic biopolymer derived from renewable feedstock. Nanocellulose reinforced PLA biocomposites have received increasing attention in academic and industrial communities. In the present study, cellulose nanofibrils (CNFs) was liberated by combined enzymatic pretreatment and high-pressure homogenization, and then subsequently incorporated into the PLA matrix to synthesize PLA/CNF biocomposite films via solution casting and melt compression. The prepared PLA/CNF biocomposite films were characterized in terms of transparency (UV-Vis spectroscopy), chemical structure (attenuated total reflectance-Fourier transform infrared, ATR-FTIR; X-ray powder diffraction, XRD), thermal (thermogravimetric analyzer, TGA; differential scanning calorimetry, DSC), and tensile properties. With 1.0–5.0 wt % additions of CNF to the PLA matrix, noticeable improvements in thermal and physical properties were observed for the resulting PLA/CNF biocomposites. The 2.5 wt % addition of CNF increased the tensile strength by 8.8%. The Tonset (initial degradation temperature) and Tmax (maximum degradation temperature) after adding 5.0 wt % CNF was increased by 20 °C, and 10 °C, respectively in the nitrogen atmosphere. These improvements were attributed to the good dispersibility and improved interfacial interaction of CNF in the PLA matrix.