Sihai Luo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sihai Luo has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
- John C. de Mello
Department of Chemistry and Bioengineering, Norwegian University of Science and Technology, Trondheim, Norway
5 shared publications - Jianying He
Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway
4 shared publications - Jinyou Shao
Xi’an Jiaotong University
4 shared publications Lijuan Chen
The First Affiliated Hospital of Xi’an Jiaotong University
4 shared publicationsQi Yuan
The First Affiliated Hospital of Xi’an Jiaotong University
4 shared publications- Xiaoliang Chen
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an, China
4 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Springer Nature in npj Flexible Electronics
Bioinspired Poisson‑actuated gating enabled high-sensitivity and stretchable multidirectional strain sensing
Decoupling strain magnitude and arbitrary orientation is a persistent challenge for wearable strain sensors, as conventional layered architectures and monolithic anisotropic networks suffer from issues of interfacial stress concentrations and irreversible signal drift under complex deformations. Inspired by the mechanogating mechanism of tactile sensory cells, we present a fluidic strain sensor with an orthogonal cross-shaped microchannel network and drum-shaped microstructures. The unique drum-shaped geometry exploits the Poisson effect to amplify transverse gap closure, inducing channel constriction. This mechanism yields a peak gauge factor exceeding 43,200 near gap closure—a four-order-of-magnitude enhancement over unstructured fluidic channels. The orthogonal architecture achieves intrinsic directional selectivity—the longitudinal channel elongates and narrows while the transverse channel shortens and widens—delivering a near-axial average directional selectivity of 15.42. By leveraging machine learning, the sensor achieves quadrant-resolved strain sensing with sub-2° angular resolution over 80% strain range, provided the loading quadrant is known. The fluidic transduction mechanism circumvents the mechanical fatigue inherent to solid-state sensing materials, demonstrating exceptional durability over 100,000 cycles. The practical utility is validated through table tennis stroke recognition achieving >95% accuracy, highlighting its potential for closed-loop athletic training and resilient human-machine interfaces.
- 30 September 2026
- Published by Springer Nature in npj Flexible Electronics
Open AccessBioinspired Poisson‑actuated gating enabled high-sensitivity and stretchable multidirectional strain sensing
Decoupling strain magnitude and arbitrary orientation is a persistent challenge for wearable strain sensors, as conventional layered architectures and monolithic anisotropic networks suffer from issues of interfacial stress concentrations and irreversible signal drift under complex deformations. Inspired by the mechanogating mechanism of tactile sensory cells, we present a fluidic strain sensor with an orthogonal cross-shaped microchannel network and drum-shaped microstructures. The unique drum-shaped geometry exploits the Poisson effect to amplify transverse gap closure, inducing channel constriction. This mechanism yields a peak gauge factor exceeding 43,200 near gap closure—a four-order-of-magnitude enhancement over unstructured fluidic channels. The orthogonal architecture achieves intrinsic directional selectivity—the longitudinal channel elongates and narrows while the transverse channel shortens and widens—delivering a near-axial average directional selectivity of 15.42. By leveraging machine learning, the sensor achieves quadrant-resolved strain sensing with sub-2° angular resolution over 80% strain range, provided the loading quadrant is known. The fluidic transduction mechanism circumvents the mechanical fatigue inherent to solid-state sensing materials, demonstrating exceptional durability over 100,000 cycles. The practical utility is validated through table tennis stroke recognition achieving >95% accuracy, highlighting its potential for closed-loop athletic training and resilient human-machine interfaces.
- 11 September 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (38) , 27895-27905
High-Throughput Fabrication of Bimetallic Au–Ag Annular Nanogap Arrays Featuring 5 nm Gaps for Surface-Enhanced Raman Spectroscopy
The confinement of light into nanometer-sized (typically <10 nm) metallic nanogaps can generate extremely high near-field enhancement, dramatically boosting absorption, emission, and Raman scattering of target molecules situated within the gaps. However, the scarcity of cost-effective, reliable, and high-throughput nanofabrication techniques capable of fabricating sub-10 nm gaps, particularly in binary nanostructures, has significantly hindered their practical applications. Here, a high-throughput nanofabrication strategy that combines anodic aluminum oxide (AAO) templates, molecular self-assembly, and glancing-angle ion-beam etching (IBE) is proposed to controllably produce large-scale bimetallic gold–silver (Au–Ag) arrays with approximately 5 nm gaps. These arrays serve as exceptional surface-enhanced Raman spectroscopy (SERS) substrates, allowing for the ultrasensitive detection of target molecules with limits of detection (LODs) as low as 10–11 M for rhodamine 6G (R6G) and 4-mercaptobenzoic acid (4-MBA) and 10–8 M for bilirubin. The bimetallic Au–Ag nanogap arrays leverage the synergistic effects of gold’s strong absorption and silver’s superior plasmonic properties, achieving significantly enhanced electromagnetic fields compared to monolithic Au–Au nanogap arrays. This cost-effective and efficient nanofabrication approach overcomes the limitations of conventional methods for fabricating binary nanostructures, providing a viable solution for developing high-sensitive and reliable SERS-based detection platforms toward chemical-/bio-sensing.
- 11 September 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (38) , 27895-27905
High-Throughput Fabrication of Bimetallic Au–Ag Annular Nanogap Arrays Featuring 5 nm Gaps for Surface-Enhanced Raman Spectroscopy
The confinement of light into nanometer-sized (typically <10 nm) metallic nanogaps can generate extremely high near-field enhancement, dramatically boosting absorption, emission, and Raman scattering of target molecules situated within the gaps. However, the scarcity of cost-effective, reliable, and high-throughput nanofabrication techniques capable of fabricating sub-10 nm gaps, particularly in binary nanostructures, has significantly hindered their practical applications. Here, a high-throughput nanofabrication strategy that combines anodic aluminum oxide (AAO) templates, molecular self-assembly, and glancing-angle ion-beam etching (IBE) is proposed to controllably produce large-scale bimetallic gold–silver (Au–Ag) arrays with approximately 5 nm gaps. These arrays serve as exceptional surface-enhanced Raman spectroscopy (SERS) substrates, allowing for the ultrasensitive detection of target molecules with limits of detection (LODs) as low as 10–11 M for rhodamine 6G (R6G) and 4-mercaptobenzoic acid (4-MBA) and 10–8 M for bilirubin. The bimetallic Au–Ag nanogap arrays leverage the synergistic effects of gold’s strong absorption and silver’s superior plasmonic properties, achieving significantly enhanced electromagnetic fields compared to monolithic Au–Au nanogap arrays. This cost-effective and efficient nanofabrication approach overcomes the limitations of conventional methods for fabricating binary nanostructures, providing a viable solution for developing high-sensitive and reliable SERS-based detection platforms toward chemical-/bio-sensing.
- Open Access
- 27 July 2026
- Published by Springer Nature in Microsystems & Nanoengineering
- Vol. 12 (1)
Wafer-scalable artificial synapses and logic gate circuits based on coplanar self-aligned-gate organic transistors for artificial vision applications
Wafer-scale and low-voltage operation are essential for practical artificial vision hardware. Here, we report a wafer-scale platform for artificial synapse and logic gate circuits with a yield exceeding 91%, utilizing coplanar self-aligned-gate (SAG) organic transistors that combine the narrow-bandgap semiconducting polymer DPP-DTT with a self-assembled monolayer dielectric. Coplanar SAG electrodes effectively suppress parasitic effects due to the reduction of gate-to-contact overlaps, enabling uniform transistor operation at low voltages (-6 to 2 V) across the wafer, delivering a high rectification ratio of 2.46 × 105. Under near-infrared illumination, the devices exhibit efficient phototransduction and reconfigurable modulation of synaptic plasticity between excitatory and inhibitory modes, with an ultra-low energy consumption of 5.28 fJ per event. In addition, minimal circuit configurations enable electrically driven NOT and NOR logic gates circuits as well as optical-electrical hybrid-input NOR logic operations, enabling maximize and simplifying the functionality of photosensing logic circuits. Furthermore, an artificial neural network constructed based on the SAG transistors further demonstrate the potential applications in handwritten digit recognition with a recognition accuracy of ~96% and image memory behavior. This work provides a scalable and effective path for developing low-power artificial synapses to neuromorphic artificial vision systems.
- 27 July 2026
- Published by Springer Nature in Microsystems & Nanoengineering
- Vol. 12 (1)
Open AccessWafer-scalable artificial synapses and logic gate circuits based on coplanar self-aligned-gate organic transistors for artificial vision applications
Wafer-scale and low-voltage operation are essential for practical artificial vision hardware. Here, we report a wafer-scale platform for artificial synapse and logic gate circuits with a yield exceeding 91%, utilizing coplanar self-aligned-gate (SAG) organic transistors that combine the narrow-bandgap semiconducting polymer DPP-DTT with a self-assembled monolayer dielectric. Coplanar SAG electrodes effectively suppress parasitic effects due to the reduction of gate-to-contact overlaps, enabling uniform transistor operation at low voltages (-6 to 2 V) across the wafer, delivering a high rectification ratio of 2.46 × 105. Under near-infrared illumination, the devices exhibit efficient phototransduction and reconfigurable modulation of synaptic plasticity between excitatory and inhibitory modes, with an ultra-low energy consumption of 5.28 fJ per event. In addition, minimal circuit configurations enable electrically driven NOT and NOR logic gates circuits as well as optical-electrical hybrid-input NOR logic operations, enabling maximize and simplifying the functionality of photosensing logic circuits. Furthermore, an artificial neural network constructed based on the SAG transistors further demonstrate the potential applications in handwritten digit recognition with a recognition accuracy of ~96% and image memory behavior. This work provides a scalable and effective path for developing low-power artificial synapses to neuromorphic artificial vision systems.
- 19 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (8) , 4694-4701
Ligand Regulation and Mechanism Study of Organotin Carboxylate Resists in DUV Lithography
With outstanding lithographic performance, metal-organic hybrid resists are gradually gaining acceptance in the semiconductor industry. While extensively investigated for extreme ultraviolet (EUV) patterning, the specific performance and mechanisms of metal-organic hybrid resists in deep ultraviolet (DUV) lithography have been less studied. Herein, we present a series of organotin carboxylates (OTCs) bearing varied carboxylate ligands as nonchemically amplified DUV resists. Through molecular optimization, this material family demonstrates sub-100 nm resolution with high pattern quality and etch resistance, potentially serving as a direct-patternable hard mask in a bilayer configuration. The structural conversion of the OTCs under DUV irradiation was investigated, revealing a radical-mediated photochemical process. Our findings highlight the viability of OTC material family as high-performance DUV resists in advanced nodes.
- 19 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (8) , 4694-4701
Ligand Regulation and Mechanism Study of Organotin Carboxylate Resists in DUV Lithography
With outstanding lithographic performance, metal-organic hybrid resists are gradually gaining acceptance in the semiconductor industry. While extensively investigated for extreme ultraviolet (EUV) patterning, the specific performance and mechanisms of metal-organic hybrid resists in deep ultraviolet (DUV) lithography have been less studied. Herein, we present a series of organotin carboxylates (OTCs) bearing varied carboxylate ligands as nonchemically amplified DUV resists. Through molecular optimization, this material family demonstrates sub-100 nm resolution with high pattern quality and etch resistance, potentially serving as a direct-patternable hard mask in a bilayer configuration. The structural conversion of the OTCs under DUV irradiation was investigated, revealing a radical-mediated photochemical process. Our findings highlight the viability of OTC material family as high-performance DUV resists in advanced nodes.
- Open Access
- 16 December 2025
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 8 (2) , 022010
Scalable and reproducible sub-5 nm manufacturing for next-generation devices
The capability to consistently manufacture structures with sub-5 nm features has greatly accelerated scientific advancements in nanoscience and nanotechnology. However, most current methods are serial processes that are time-consuming and impractical for large-scale manufacturing at the sub-5 nm level. The challenge of achieving scalable and reproducible production of sub-5 nm structures poses a significant hurdle for both fundamental research and commercial implementations. In this review, we explore some representative sub-5 nm fabrication strategies, focusing on approaches that facilitate scalable and reproducible manufacturing. We highlight the most promising techniques such as extreme ultraviolet lithography, electron beam lithography, directed self-assembly and atomic layer lithography that hold potential breakthroughs in both research and industry, based on criteria such as resolution, scalability, reproducibility and their applicability in photonics such as surface-enhanced spectroscopies, terahertz science, and nonlinear optics, as well as in electronics such as quantum devices, molecular devices and memory devices. The evolution of scalable and reproducible sub-5 nm manufacturing methods will ultimately revolutionize next-generation devices, encompassing quantum technologies, neuromorphic computing chips, and the mass production of integrated circuits.
- 16 December 2025
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 8 (2) , 022010
Open AccessScalable and reproducible sub-5 nm manufacturing for next-generation devices
The capability to consistently manufacture structures with sub-5 nm features has greatly accelerated scientific advancements in nanoscience and nanotechnology. However, most current methods are serial processes that are time-consuming and impractical for large-scale manufacturing at the sub-5 nm level. The challenge of achieving scalable and reproducible production of sub-5 nm structures poses a significant hurdle for both fundamental research and commercial implementations. In this review, we explore some representative sub-5 nm fabrication strategies, focusing on approaches that facilitate scalable and reproducible manufacturing. We highlight the most promising techniques such as extreme ultraviolet lithography, electron beam lithography, directed self-assembly and atomic layer lithography that hold potential breakthroughs in both research and industry, based on criteria such as resolution, scalability, reproducibility and their applicability in photonics such as surface-enhanced spectroscopies, terahertz science, and nonlinear optics, as well as in electronics such as quantum devices, molecular devices and memory devices. The evolution of scalable and reproducible sub-5 nm manufacturing methods will ultimately revolutionize next-generation devices, encompassing quantum technologies, neuromorphic computing chips, and the mass production of integrated circuits.
- 16 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (21) , 8636-8643
Large-Scale Fabrication of 5 nm Plasmonic Hybrid Nanoslit Arrays
Surface plasmon resonance harnessed through nanometer-scale metallic gaps generates intense near-fields, unlocking vast potential for applications in nanophotonics and biosensing. However, the scarcity of scalable and reproducible nanofabrication techniques capable of achieving a sub-10 nm gap remains a significant barrier to widespread implementation. Here, we present a high-throughput method combining deep-UV interference lithography, molecular self-assembly, and peeling to fabricate large-scale arrays of an ∼ 5 nm Au-Ag hybrid nanoslit. These arrays serve as highly effective substrates for surface-enhanced Raman spectroscopy (SERS), demonstrating the ability to detect rhodamine 6G at concentrations as low as 1 pM with an analytical enhancement factor of 2.2 × 107. Specifically, the hybrid nanoslit arrays exhibit significantly higher (by 2.6-fold) field enhancements than monolithic nanoslit arrays due to the in-phase hybridization mode in Au-Ag nanoslit. Our cost-effective, large-scale approach overcomes traditional scalability and hybrid patterning barriers, offering transformative potential for sensitive, reliable SERS-based detection platforms.
- 16 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (21) , 8636-8643
Large-Scale Fabrication of 5 nm Plasmonic Hybrid Nanoslit Arrays
Surface plasmon resonance harnessed through nanometer-scale metallic gaps generates intense near-fields, unlocking vast potential for applications in nanophotonics and biosensing. However, the scarcity of scalable and reproducible nanofabrication techniques capable of achieving a sub-10 nm gap remains a significant barrier to widespread implementation. Here, we present a high-throughput method combining deep-UV interference lithography, molecular self-assembly, and peeling to fabricate large-scale arrays of an ∼ 5 nm Au-Ag hybrid nanoslit. These arrays serve as highly effective substrates for surface-enhanced Raman spectroscopy (SERS), demonstrating the ability to detect rhodamine 6G at concentrations as low as 1 pM with an analytical enhancement factor of 2.2 × 107. Specifically, the hybrid nanoslit arrays exhibit significantly higher (by 2.6-fold) field enhancements than monolithic nanoslit arrays due to the in-phase hybridization mode in Au-Ag nanoslit. Our cost-effective, large-scale approach overcomes traditional scalability and hybrid patterning barriers, offering transformative potential for sensitive, reliable SERS-based detection platforms.
- Open Access
- 30 December 2023
- Published by Elsevier in Materials & Design
- Vol. 237
Hollow porous PLA/PBAT composite microfibers with enhanced toughness and prolonged drug release for wound healing
- 30 December 2023
- Published by Elsevier in Materials & Design
- Vol. 237
Open AccessHollow porous PLA/PBAT composite microfibers with enhanced toughness and prolonged drug release for wound healing
- Open Access
- 24 October 2023
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 11, 1242797
Detection of environmental nanoplastics via surface-enhanced Raman spectroscopy using high-density, ring-shaped nanogap arrays
Micro- and nano-plastics (MNPs) are global contaminants of growing concern to the ecosystem and human health. In-the-field detection and identification of environmental micro- and nano-plastics (e-MNPs) is critical for monitoring the spread and effects of e-MNPs but is challenging due to the dearth of suitable analytical techniques, especially in the sub-micron size range. Here we show that thin gold films patterned with a dense, hexagonal array of ring-shaped nanogaps (RSNs) can be used as active substrates for the sensitive detection of micro- and nano-plastics by surface-enhanced Raman spectroscopy (SERS), requiring only small sample volumes and no significant sample preparation. By drop-casting 0.2-μL aqueous test samples onto the SERS substrates, 50-nm polystyrene (PS) nanoparticles could be determined via Raman spectroscopy at concentrations down to 1 μg/mL. The substrates were successfully applied to the detection and identification of ∼100-nm polypropylene e-MNPs in filtered drinking water and ∼100-nm polyethylene terephthalate (PET) e-MNPs in filtered wash-water from a freshly cleaned PET-based infant feeding bottle.
- 24 October 2023
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 11, 1242797
Open AccessDetection of environmental nanoplastics via surface-enhanced Raman spectroscopy using high-density, ring-shaped nanogap arrays
Micro- and nano-plastics (MNPs) are global contaminants of growing concern to the ecosystem and human health. In-the-field detection and identification of environmental micro- and nano-plastics (e-MNPs) is critical for monitoring the spread and effects of e-MNPs but is challenging due to the dearth of suitable analytical techniques, especially in the sub-micron size range. Here we show that thin gold films patterned with a dense, hexagonal array of ring-shaped nanogaps (RSNs) can be used as active substrates for the sensitive detection of micro- and nano-plastics by surface-enhanced Raman spectroscopy (SERS), requiring only small sample volumes and no significant sample preparation. By drop-casting 0.2-μL aqueous test samples onto the SERS substrates, 50-nm polystyrene (PS) nanoparticles could be determined via Raman spectroscopy at concentrations down to 1 μg/mL. The substrates were successfully applied to the detection and identification of ∼100-nm polypropylene e-MNPs in filtered drinking water and ∼100-nm polyethylene terephthalate (PET) e-MNPs in filtered wash-water from a freshly cleaned PET-based infant feeding bottle.
- 10 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (36) , 12222-12233
A PA66 lamellar crystal film with excellent triboelectric performance in vertical contact separation mode
Triboelectric nanogenerators (TENGs) are gaining tremendous attention as an environmentally friendly technology that converts low-frequency mechanical energy into electrical energy. However, the output of TENGs is limited by the tribolayer material used. In this study, a unique lamellar crystal triboelectric nanogenerator (LC-TENG) that uses polyamide-66 (PA66) lamellar crystal spin-coated films as positive triboelectric layers and FEP films as negative triboelectric layers is presented. The large vertical interlocking nanosheet structure on the PA66 spin-coating film, incubated in solution, improves surface roughness and promotes charge storage capacity. Under a constant force of 10 N and a frequency of 2 Hz, the LC-TENG with dimensions of 3 cm × 3 cm can achieve a peak voltage and current of 153 V and 7.35 μA, respectively. With an external load resistance of ∼11 MΩ, the TENG's maximum power density is 0.67 W m−2. The LC-TENG can easily harvest energy from human motions and light up a 36-LED array driven by a linear motor. Compared to TENGs using the initial smooth spin-coated film as the triboelectric electrode, the voltage and current from the lamellar structure film are 2.38 times and 2.17 times higher, respectively. This is the first time that a lamellar crystal structure has been introduced into friction material optimization, providing an efficient and feasible way to explore active sensor or electrode materials for self-powered electronic devices.
- 10 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (36) , 12222-12233
A PA66 lamellar crystal film with excellent triboelectric performance in vertical contact separation mode
Triboelectric nanogenerators (TENGs) are gaining tremendous attention as an environmentally friendly technology that converts low-frequency mechanical energy into electrical energy. However, the output of TENGs is limited by the tribolayer material used. In this study, a unique lamellar crystal triboelectric nanogenerator (LC-TENG) that uses polyamide-66 (PA66) lamellar crystal spin-coated films as positive triboelectric layers and FEP films as negative triboelectric layers is presented. The large vertical interlocking nanosheet structure on the PA66 spin-coating film, incubated in solution, improves surface roughness and promotes charge storage capacity. Under a constant force of 10 N and a frequency of 2 Hz, the LC-TENG with dimensions of 3 cm × 3 cm can achieve a peak voltage and current of 153 V and 7.35 μA, respectively. With an external load resistance of ∼11 MΩ, the TENG's maximum power density is 0.67 W m−2. The LC-TENG can easily harvest energy from human motions and light up a 36-LED array driven by a linear motor. Compared to TENGs using the initial smooth spin-coated film as the triboelectric electrode, the voltage and current from the lamellar structure film are 2.38 times and 2.17 times higher, respectively. This is the first time that a lamellar crystal structure has been introduced into friction material optimization, providing an efficient and feasible way to explore active sensor or electrode materials for self-powered electronic devices.
- Open Access
- 30 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (13) , 11491-11499
Thickness Mediated Morphology Evolution in Sub-10-nm Metal Film Deposition: Implications for Nondestructive Testing
- 30 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (13) , 11491-11499
Open AccessThickness Mediated Morphology Evolution in Sub-10-nm Metal Film Deposition: Implications for Nondestructive Testing