DQDengzhou Quan

Dengzhou Quan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dengzhou Quan has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Finite Element Modeling and Performance Evaluation of a Novel 3D Isolation Bearing

    by Jianjun Li, Lvhong Sun, Yanchao Wu, Yun Chen, Dengzhou Quan, Tuo Lei, Sansheng Dong

    A numerical investigation is conducted to examine the mechanical properties of a novel three-dimensional (3D) isolation bearing. This device is primarily composed of a lead rubber bearing (LRB), disc springs, and U-shaped dampers. A finite element model is developed and validated against the previous experimental results. Subsequently, comprehensive analyses are performed to evaluate the influence of vertical loadings, shear strains, and the number of U-shaped dampers on the horizontal behavior, as well as the effects of displacement amplitudes and the number of dampers on the vertical performance. Under horizontal loading conditions, the bearing demonstrates reliable energy dissipation capabilities. However, the small lead core design limits its energy dissipation capacity. Compared with the bearing without U-shaped dampers, the bearing’s energy dissipation capacity increases by 628%, 1300%, and 2581% when employing 1, 2, and 4 dampers on each side, respectively. Regarding vertical performance, the innovative disc spring group design effectively reduces the tensile displacement of the LRB under tension, thereby enhancing the overall tensile capacity of the bearing. Furthermore, in comparison to their contribution to horizontal energy dissipation, the U-shaped dampers play a relatively minor role in vertical energy dissipation.


  • Top Cited Papers
    Open Access

    Properties of Sustainable Earth Construction Materials: A State-of-the-Art Review

    by Youchao Zhang, Shuangli Jiang, Dengzhou Quan, Kun Fang, Bo Wang, Zhiming Ma

    As a significant symbol of human civilization advancement, earth construction not only inherits traditional architectural culture but also enjoys worldwide popularity and widespread usage throughout China due to its economic and environmentally friendly nature, as well as its moisture absorption and heat storage advantages. Consequently, earth construction has garnered considerable attention from international scholars. This paper compiles relevant data to review the developmental trajectory of earth construction, while conducting an in-depth analysis of the performance characteristics of earthen materials. Furthermore, it provides a comprehensive overview of the impact of three modification methods on the mechanical and durability properties of earthen materials, along with a discussion on the research concerning the thermal and moisture performance of these materials. Simultaneously, discussions were held on the relevant research findings and potential directions for the development of earthen materials. Finally, conclusions were drawn, suggesting a comprehensive utilization of their thermal and moisture performance, emphasizing the enhancement of their mechanical and durability performance. Additionally, attention was urged towards the economic and ecological aspects during the construction and maintenance phases of earth construction. These recommendations aim to facilitate the sustainable development and widespread application of earthen materials in the future.


  • Open Access

    3-D Numerical Simulation of Seismic Response of the Induced Joint of a Subway Station

    by Dengzhou Quan, Shaobo Chai, Yuling Wang, Zhishuang Fan, Yonghong Bu

    In recent times, induced joints have been set along the length of subway stations in order to avoid disordered cracking of the main structures occurring due to temperature stress, concrete shrinkage, creep, or uneven foundation settlement. At present, the use of induced joints in subway station structures is mainly based on engineering experience. The seismic response of induced joints has not yet been well explained, much less mastered. In this study, a 3-D numerical model of a subway station incorporating certain sorts of induced joints is established systematically. Then, the seismic response of those induced joints applied in different positions and various forms has been studied under different seismic waves by varying the spectral characteristics and peak acceleration values of the waves. The results show that the horizontal relative sliding displacement of the structures on both sides of an induced joint increases gradually from bottom to top along the structure of the subway station. While the vertical sliding displacements that occur along the section width are larger at both ends of the induced joints than in the middle. What is more, with an increase in seismic intensity, the horizontal relative sliding displacement becomes larger, while the vertical displacement becomes even smaller. In addition, the relative sliding displacement can be reduced by increasing the residual longitudinal reinforcement ratio of the induced joint. Furthermore, it is discovered that the setting of key grooves at the bottom plate of the induced joint section has a certain effect on controlling the horizontal relative sliding displacement, as well as a significant effect on preventing the vertical relative dislocation of the structures on both sides of the induced joint.


  • Open Access

    Seismic Analysis Method for Underground Structure in Loess Area Based on the Modified Displacement-Based Method

    by Ruijie Zhang, Dan Ye, Jianting Zhou, Dengzhou Quan

    At present, the seismic design research of underground structures in loess areas is lagging behind compared with practical engineering requirements. The selection of seismic calculation methods and parameters does not consider the influences of the special geological conditions in various regions, so their usefulness is limited. Based on the above problems, a modified displacement-based method (DBM) was proposed and its application was compared with the most commonly used methods of analysis (force-based design method, displacement-based design method, detailed equivalent static analysis numerical method, and the full dynamic time-history method). The results were also validated by considering data from shaking table tests conducted on a case study involving the underground Feitian Road subway station in Xi’an. The results show that compared with DBM, the average accuracy of the modified DBM technique is improved by 41.65%. The modified DBM offers good accuracy, simplicity in its model, a rapid analysis time, and easy convergence.


  • Open Access

    Experimental study on seismic response of subway station built in loess

    by Dengzhou Quan, Shaobo Chai, Su Chen, Yihong Wang

    The present investigation is concerned with the dynamic seismic response of subway station built in loess site by a series of shaking table tests. Firstly, according to the Bockingham π theorem, the scale ratio is determined and then the model system is designed. Then, based on the geological environment and seismological background of Xi’an, the input ground motions and loading scheme are determined. On the basis of the test data, the acceleration responses of model system, strain response characteristics of the structure, distribution of dynamic soil pressure between loess and structure, the settlement of model ground and the seismic damage mode of model system are analyzed systematically. The results show that the peak accelerations in model soil increase gradually from the bottom to the top of the soil. The peak tensile strains measured at the top and bottom of the center columns are larger than those obtained at the side walls, while the peak tensile strains in the floor slab are the smallest. Moreover, the relationship between structure uplift and soil pressure difference can be fitted by exponential function.