Changfei Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Changfei Zhu has a total of 98 co-authors. Here are the top co-authors by number of shared publications:
Guoshun Jiang
CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, China
17 shared publications- Tao Chen
State Key Laboratory of Precision and Intelligent Chemistry Collaborative Innovation Center of Chemistry for Energy Materials (iChEM) Department of Materials Science and Engineering University of Science and Technology of China Hefei China
12 shared publications Weifeng Liu
CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, China
10 shared publications- Weifeng Liu
University of Science and Technology of China
9 shared publications Yan Zhang
CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, No. 96 Jinzhai Road, Hefei, Anhui Province, 230026, China
8 shared publicationsChenhui Jiang
Hefei National Laboratory for Physical Sciences at Microscale CAS Key Laboratory of Materials for Energy Conversion Department of Materials Science and Engineering University of Science and Technology of China No. 96 Jinzhai Road Hefei Anhui 230026 China
6 shared publications
Latest Publications
Efficient Sb2(S,Se)3 Solar Modules Enabled by Hydrothermal Deposition
Antimony selenosulfide (Sb2(S,Se)3) is a promising solar absorber due to the excellent stability and suitable photovoltaic parameters. The power conversion efficiency (PCE) has overcome 10% in lab scale. In terms of practical applications, the efficiency should be further improved and the suitable scalable fabrication approach should also be established. Herein, a large‐area fabrication of Sb2(S,Se)3 solar cell by hydrothermal deposition is demonstrated. It is found that this approach is able to generate Sb2(S,Se)3 film with high uniformity with regard to both the chemical composition and surface morphology. Taking advantage of laser scribing technology, series connected antimony selenosulfide monolithic integrated photovoltaic modules are obtained. The prepared solar cell achieved PCE of 7.43%, with an active area of 15.66 cm2, which is the highest efficiency at module scale. A convenient approach for the fabrication of large‐area series‐connected Sb2(S,Se)3 solar cells is offered.
Efficient Sb2(S,Se)3 Solar Modules Enabled by Hydrothermal Deposition
Antimony selenosulfide (Sb2(S,Se)3) is a promising solar absorber due to the excellent stability and suitable photovoltaic parameters. The power conversion efficiency (PCE) has overcome 10% in lab scale. In terms of practical applications, the efficiency should be further improved and the suitable scalable fabrication approach should also be established. Herein, a large‐area fabrication of Sb2(S,Se)3 solar cell by hydrothermal deposition is demonstrated. It is found that this approach is able to generate Sb2(S,Se)3 film with high uniformity with regard to both the chemical composition and surface morphology. Taking advantage of laser scribing technology, series connected antimony selenosulfide monolithic integrated photovoltaic modules are obtained. The prepared solar cell achieved PCE of 7.43%, with an active area of 15.66 cm2, which is the highest efficiency at module scale. A convenient approach for the fabrication of large‐area series‐connected Sb2(S,Se)3 solar cells is offered.
- Open Access
- 30 March 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (13) , 133901
Pulsed laser deposition of antimony selenosulfide thin film for efficient solar cells
Antimony selenosulfide, Sb2(SxSe1−x)3, has been considered as a promising light harvesting material for low-cost, non-toxic, and stable solar cell applications. However, current preparation methods of Sb2(SxSe1−x)3 suffer from low-quality films, which hampers the performance improvement in Sb2(SxSe1−x)3-based solar cells. Herein, we develop a pulsed laser deposition technique to fabricate antimony selenosulfide films with flat and compact surface morphology and high crystallinity. The composition of the as-obtained films can be conveniently tuned via varying molar ratios of Sb2S3 and Se in targets. At optimized conditions, we fabricate planar heterojunction solar cells and then obtain a significantly improved power conversion efficiency of 7.05%. Our research offers a facile and robust preparation method for Sb2(SxSe1−x)3 films with enhanced photovoltaic properties.
- 30 March 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (13) , 133901
Open AccessPulsed laser deposition of antimony selenosulfide thin film for efficient solar cells
Antimony selenosulfide, Sb2(SxSe1−x)3, has been considered as a promising light harvesting material for low-cost, non-toxic, and stable solar cell applications. However, current preparation methods of Sb2(SxSe1−x)3 suffer from low-quality films, which hampers the performance improvement in Sb2(SxSe1−x)3-based solar cells. Herein, we develop a pulsed laser deposition technique to fabricate antimony selenosulfide films with flat and compact surface morphology and high crystallinity. The composition of the as-obtained films can be conveniently tuned via varying molar ratios of Sb2S3 and Se in targets. At optimized conditions, we fabricate planar heterojunction solar cells and then obtain a significantly improved power conversion efficiency of 7.05%. Our research offers a facile and robust preparation method for Sb2(SxSe1−x)3 films with enhanced photovoltaic properties.
Water Additive Enhanced Solution Processing of Alloy Sb2(S1−xSex)3‐Based Solar Cells
Solution process is a convenient and cost‐effective approach to the deposition of thin films for optoelectronic devices. The quality of as‐prepared films depends critically on the applied precursor materials as well as solvents. Herein, a method is developed to synthesize Sb2(S1−xSex)3 thin films and demonstrate the role played by water during the film formation. In the synthesis, antimony trichloride, selenourea, and thiourea used as Sb, Se, and S sources are dissolved in N,N‐dimethylformamide and dimethyl sulfoxide mixed solvents. It is found that a tiny amount of water (1%) in the solution enables an essential increase in grain size that in turn facilitates carrier transport and suppresses recombination. The deep‐level transient spectroscopy analysis shows that water additive helps to reduce defect density and type in the as‐obtained films. Finally, the improved film quality leads to a certified power conversion efficiency of 7.42%, a top efficiency in Sb2(S,Se)3‐based solar cells regardless of the device configurations. This study provides an effective approach to tailor the optoelectronic properties of Sb2(S,Se)3 and a practical strategy to improve the device efficiency.
Water Additive Enhanced Solution Processing of Alloy Sb2(S1−xSex)3‐Based Solar Cells
Solution process is a convenient and cost‐effective approach to the deposition of thin films for optoelectronic devices. The quality of as‐prepared films depends critically on the applied precursor materials as well as solvents. Herein, a method is developed to synthesize Sb2(S1−xSex)3 thin films and demonstrate the role played by water during the film formation. In the synthesis, antimony trichloride, selenourea, and thiourea used as Sb, Se, and S sources are dissolved in N,N‐dimethylformamide and dimethyl sulfoxide mixed solvents. It is found that a tiny amount of water (1%) in the solution enables an essential increase in grain size that in turn facilitates carrier transport and suppresses recombination. The deep‐level transient spectroscopy analysis shows that water additive helps to reduce defect density and type in the as‐obtained films. Finally, the improved film quality leads to a certified power conversion efficiency of 7.42%, a top efficiency in Sb2(S,Se)3‐based solar cells regardless of the device configurations. This study provides an effective approach to tailor the optoelectronic properties of Sb2(S,Se)3 and a practical strategy to improve the device efficiency.
- 1 January 2019
- Published by Elsevier in Science Bulletin
- Vol. 64 (2) , 136-141
Composition engineering of Sb2S3 film enabling high performance solar cells
- 1 January 2019
- Published by Elsevier in Science Bulletin
- Vol. 64 (2) , 136-141
Composition engineering of Sb2S3 film enabling high performance solar cells
- Open Access
- 30 November 2018
- Published by Springer Nature in Science China Materials
- Vol. 62 (6) , 899-906
A thiol-amine mixture for metal oxide towards device quality metal chalcogenides
- 30 November 2018
- Published by Springer Nature in Science China Materials
- Vol. 62 (6) , 899-906
Open AccessA thiol-amine mixture for metal oxide towards device quality metal chalcogenides
- 10 October 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (43) , 21320-21326
Sequential deposition route to efficient Sb 2 S 3 solar cells
Sb 2 S 3 films for efficient Sb 2 S 3 -based solar cells can be obtained through annealing a bilayer of antimony acetate and thiourea films.
- 10 October 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (43) , 21320-21326
Sequential deposition route to efficient Sb 2 S 3 solar cells
Sb 2 S 3 films for efficient Sb 2 S 3 -based solar cells can be obtained through annealing a bilayer of antimony acetate and thiourea films.
- 3 August 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (34) , 16322-16327
Vacuum assisted solution processing for highly efficient Sb 2 S 3 solar cells
Vacuum assisted solution processing is capable of fabricating Sb 2 S 3 films with high surface coverage, high crystallinity and phase purity, leading to a high power conversion efficiency of 6.78%.
- 3 August 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (34) , 16322-16327
Vacuum assisted solution processing for highly efficient Sb 2 S 3 solar cells
Vacuum assisted solution processing is capable of fabricating Sb 2 S 3 films with high surface coverage, high crystallinity and phase purity, leading to a high power conversion efficiency of 6.78%.
- 26 July 2018
- Published by Wiley in ChemSusChem
- Vol. 11 (18) , 3208-3214
Aqueous‐Solution‐Based Approach Towards Carbon‐Free Sb2S3 Films for High Efficiency Solar Cells
Sb2S3 is a new kind of photovoltaic material that is promising for practical application in solar cells owing to its suitable bandgap, earth‐abundant elements, and excellent stability. Here, we report on an aqueous‐solution‐based approach for the synthesis of Sb2S3 films from easily accessible Sb2O3 as antimony source. In this reaction, 3‐mercaptopropionic acid was applied as both solvent and sulfur precursor, aqueous ammonia was employed as a solvent. After simple annealing at a temperature as low as 270 °C, the spin‐coated precursor solution can generate compact, flat, uniform, and well‐crystallized Sb2S3 film. Mechanistic study showed that the formation of Sb‐complex with ammonium carboxylates leads to the successful dissolution of Sb2O3 powder. A suitable annealing process was able to generate carbon‐free Sb2S3 films. Planar heterojunction solar cell based on the as‐prepared Sb2S3 film delivered a power conversion efficiency of 5.57 %, which is the highest efficiency of solution‐processed planar heterojunction Sb2S3 solar cells and a high value in all kinds of Sb2S3 solar cells. This research provides a convenient approach for the fabrication of device‐quality Sb2S3 films, and highlights solution processing of carbon‐free metal chalcogenide thin films as a suitable process for application in optoelectronic devices.
- 26 July 2018
- Published by Wiley in ChemSusChem
- Vol. 11 (18) , 3208-3214
Aqueous‐Solution‐Based Approach Towards Carbon‐Free Sb2S3 Films for High Efficiency Solar Cells
Sb2S3 is a new kind of photovoltaic material that is promising for practical application in solar cells owing to its suitable bandgap, earth‐abundant elements, and excellent stability. Here, we report on an aqueous‐solution‐based approach for the synthesis of Sb2S3 films from easily accessible Sb2O3 as antimony source. In this reaction, 3‐mercaptopropionic acid was applied as both solvent and sulfur precursor, aqueous ammonia was employed as a solvent. After simple annealing at a temperature as low as 270 °C, the spin‐coated precursor solution can generate compact, flat, uniform, and well‐crystallized Sb2S3 film. Mechanistic study showed that the formation of Sb‐complex with ammonium carboxylates leads to the successful dissolution of Sb2O3 powder. A suitable annealing process was able to generate carbon‐free Sb2S3 films. Planar heterojunction solar cell based on the as‐prepared Sb2S3 film delivered a power conversion efficiency of 5.57 %, which is the highest efficiency of solution‐processed planar heterojunction Sb2S3 solar cells and a high value in all kinds of Sb2S3 solar cells. This research provides a convenient approach for the fabrication of device‐quality Sb2S3 films, and highlights solution processing of carbon‐free metal chalcogenide thin films as a suitable process for application in optoelectronic devices.
- 24 April 2018
- Published by Wiley in Energy Technology
- Vol. 6 (11) , 2126-2131
Phosphotungstic Acid Regulated Chemical Bath Deposition of Sb2S3 for High‐Efficiency Planar Heterojunction Solar Cell
Chemical bath deposition is a convenient method for preparing Sb2S3 film which is considered as a promising photovoltaic material. However, impurity phases such as Sb2O3, SbOCl, Sb2(SO4)3 and Sb(OH)3 are inevitably generated in this solution process. Herein, we demonstrate that phosphotungstic acid in the precursor solution is able to suppress the formation of oxide and oxyhalide by‐products, leading to considerably optimized composition and crystallinity for solar cell applications. With this method, a remarkable improvement of power conversion efficiency from 1.91 % to 4.61 % is obtained, which is also the highest efficiency in planar heterojunction solar cells by solution processed Sb2S3 absorber layer.
- 24 April 2018
- Published by Wiley in Energy Technology
- Vol. 6 (11) , 2126-2131
Phosphotungstic Acid Regulated Chemical Bath Deposition of Sb2S3 for High‐Efficiency Planar Heterojunction Solar Cell
Chemical bath deposition is a convenient method for preparing Sb2S3 film which is considered as a promising photovoltaic material. However, impurity phases such as Sb2O3, SbOCl, Sb2(SO4)3 and Sb(OH)3 are inevitably generated in this solution process. Herein, we demonstrate that phosphotungstic acid in the precursor solution is able to suppress the formation of oxide and oxyhalide by‐products, leading to considerably optimized composition and crystallinity for solar cell applications. With this method, a remarkable improvement of power conversion efficiency from 1.91 % to 4.61 % is obtained, which is also the highest efficiency in planar heterojunction solar cells by solution processed Sb2S3 absorber layer.
- 29 August 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 5 (37) , 19884-19891
Cu2−xGeS3: a new hole transporting material for stable and efficient perovskite solar cells
An alternative hole transporting material Cu2−xGeS3 is developed for perovskite solar cells, which can improve both efficiency and device stability.
- 29 August 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 5 (37) , 19884-19891
Cu2−xGeS3: a new hole transporting material for stable and efficient perovskite solar cells
An alternative hole transporting material Cu2−xGeS3 is developed for perovskite solar cells, which can improve both efficiency and device stability.